Xiaomi band 4 how to configure

Xiaomi

How to turn on and connect Xiaomi Mi Band 4 to the phone for the first time?

The fitness tracker doesn’t require actual activation, but it does need to be “tethered” to your phone the first time you set it up. It’s not hard. All it takes is a little bit of preparation. The Mi Band 4 can be activated in a few simple steps:

Turn on Bluetooth on your smartphone;

Install the Mi Fit app on your smartphone. It can be found in the Play Market or App Store, depending on your operating system;

In the Mi Fit app, sign in to your Mi Account. If you don’t have a Mi account, tap the “Create” button and follow the instructions on the screen;

Mi Smart Band 4. How To Setup And Unboxing | How To Connect Mi Band 4 With Phone # Mi Smart Band 4

Follow the instructions on the screen. You may need to turn on Bluetooth, give access to Do Not Disturb mode, notifications and so on;

Remove the charging cradle and fitness bracelet from the box, and put the capsule on charging. After a while (preferably a couple of hours, but if you are really impatient, after 10-15 minutes) remove the capsule. The bracelet will turn on and go into search mode automatically;

  • Go to “Profile” (bottom right button);
  • Click “Add device.”
  • Select “Bracelet;
  • Wait a while for the phone to find the bracelet;
  • Follow the instructions on the screen.

If the bracelet does not connect, make sure Bluetooth is turned on. In addition, it may help to reset the smartphone. Finally, if there are other bracelets tethered to the Mi Fit app. untether them.

If none of these helped, you may have purchased a fake fitness bracelet.

In the third version, the contacts of the device were installed on the end, so to recharge the capsule had to be removed from the strap. In the new model, the situation has changed slightly, although the contacts have been moved down. Before you charge the Mi Band 4, the capsule must also be removed. To do this, unscrew the edge of the strap from the capsule to the side, with the other hand press it from below.

The capsule comes out of the strap, it is taken out and set to charge. Check if the contacts are tight. Insert the USB connector of the cable into the appropriate power supply on your computer, network adapter. Optimal current of 1A. If you exceed this value, the battery will charge faster, but it will also fail sooner. It takes up to 2 hours to fully charge.

Charging

Remove the capsule from the strap to recharge. To do this, pull back the strap and pry the tracker with an ejecting motion. Place it in the charger. Contacts should fit tightly together.

Now plug the charger accessory cable into a USB port on your computer or laptop, or plug it into an outlet. If you find this procedure difficult, use a clothespin charger. The accessory allows you to charge your gadget without removing it from the strap

Mi Band charges for 1.5-2 hours at up to 1A current. One cycle lasts for 20-25 days of moderate use. In intensive mode the bracelet discharges in a week.

User’s Manual in Russian in PDF format. 9 pages, will clarify how to use the watch answers to many popular questions.

  • How to turn on/off.
  • How to set the date and time.
  • How to charge the fitness bracelet.
  • How to connect to your smartphone.
  • Interface and control.
  • Menu of the bracelet.
  • How to wear it properly.
  • How to set up: watch face, notifications, alarm clock, search and detection, heart rate measurement, night mode, background mode, weather, check and update software, turn off the bracelet.

How to turn the bracelet on and connect it to the phone

Buying a fitness device allows you to monitor your health and take a more intelligent approach to daily physical activity. In order to use the device properly, you need to turn on and set up the Xiaomi Mi Band fitness bracelet properly. The algorithm of actions is as follows:

  • Open the box, take out the product and put it on charge. This is due to the fact that the new device has a charge of 1-2%.
  • Wait for the three lights to illuminate, indicating that it is fully charged.
  • Download the Mr Fit app. This is the official program through which you can configure the Xiaomi Mi Band 4, 3, 2 bracelet, and then monitor the collected information. The program is available for download in the app stores.
  • Create an account (we will focus on this below).
  • Log in to the app and select your Mi account.
  • Press Profile button in the program and then Add device.
  • Click on the Bracelet button and wait for the Tap the button to appear.
  • Tap the button below the display.

Many people try to sync the Xiaomi Mi Band with their phone via Bluetooth. This is not correct. For the correct operation it is better to synchronize through the application, as mentioned above. Later it is easier to configure the work of the device “by yourself”.

How to turn on the bracelet and connect it to the phone

Before setting up the Xiaomi fitness device, take it out of the box and put it on charge. The charging kit is easy to find in the box with the device. Connect it on one side to the Xiaomi 4 wristband, and on the other side to your computer or household network (through the power supply).

xiaomi, band, configure

To activate the Xiaomi Mi Band 4 bracelet, you do not need to press any buttons. just put it on and raise your hand.

To work with the fitness device, download to your smartphone or tablet Mr Fit program, which is available on Google Play or App Store (depending on the type of device). Next, enter the app, go to Add device, click on the Bracelet button and agree to this action. Now click on the Xiaomi Mi Band 4 and confirm the pairing by tapping on the special display icon.

Setting up Xiaomi Mi band 4

Xiaomi is a company that produces budget and quality technology. In addition to smartphones, the manufacturer makes smart vacuum cleaners, thermoses, fitness trackers and even clothes. In the bracelets series Mi band Xiaomi has put a variety of features: from viewing notifications of calls and Комментарии и мнения владельцев on social networks to the measurement of heart rate.

Using this gadget is very easy, but you need to set it up correctly. All the tips on setting up Xiaomi Mi band 4 in an accessible form are outlined in the instructions. But after reading people have questions, which are answered in this article.

Calls and messages are not displayed

Unfortunately, even the correct setting does not protect against problems. So you need to know what actions will help if the bracelet does not display alerts or does it incorrectly.

Updating the software

If you have an outdated version of the operating system (below Android 4.4) calls are usually not displayed on the Mi Band. The only thing you can do in this case is to turn off smart unlock and put “No restrictions” in the background activity control for Mi Fit.

It is also recommended to regularly update MIUI firmware as stable updates are released (on Xiaomi and Redmi phones). And, of course, install the latest version of Mi Fit or other software with which you control your wearable device.

Deactivate “Only on off screen” option

If calls do not come from Viber, WhatsApp, Skype, disable the function “Receive notifications only on off screen”. When you receive a messenger call, the smartphone display automatically lights up and the bracelet does not need to vibrate, because the user can see the call. But it happens that the phone is far from the owner, lying in a in silent mode, so notifications from Mi Band is needed. You can’t explain these situations to the app, so we just deactivate the function.

There is a similar point in the messengers themselves. Go to “Settings”. “Notifications” and uncheck “Turn on screen”.

Checking permissions

Make sure you’ve given Mi Fit all your permissions. The program must have access to contacts, location, memory, and phone. These parameters are set in the smartphone settings.

Setting up incoming call notifications on Mi Band 4

Call notifications come to the fitness bracelet in the form of vibration to turn them on, you need:

  • whether to show contact information;
  • delay notifications in case you have your phone handy;
  • Whether or not to be notified of unknown numbers;
  • select vibration.