How to deactivate the flashlight when calling on the iPhone

Turning on the flash in the iPhone

iPhone can be used not only for calls, but also for photo / video recording. Sometimes such work takes place at night, and that’s why Apple’s phones have a camera flash and a built-in flashlight. These functions can be both advanced and have a minimal set of possible actions.

How to make the iPhone flash when you call

If you turn on the flashlight on your iPhone during a call, the LED light will start flashing repeatedly. this is very handy if you have the silent mode set. This feature is not a bad addition to the vibration that is common to any smartphone.

For the first time LED flash was used on 4th generation smartphones.

You can make a kind of strobe light or repeatedly flashing flashlight out of your iPhone like this:

• To turn on flashing light on iPhone, go to “Flash alert” section. Then it remains to toggle the LED device warning slider to the on position. (Fig. 3)

After the manipulation the light indicator of the gadget will blink three times for new incoming calls, SMS and various notifications. The indication function is useful for people with hearing difficulties. It will perfectly complement the audio and vibration indication.

• Chameleon Sunglasses for Men and Women
• Contraceptive non-hormonal pills
• ACC. instructions for use in coughs in children and adults

How to turn on the flash when calling on the iPhone

To ensure that an incoming call is accompanied not only by a sound and vibration signal, but also flashing of the flash, you will need to perform a few simple steps.

Open your phone’s settings. Go to “General”.

Close the Settings Window. From now on, not only incoming calls will be accompanied by flashing LED flash on your apple device, but also the alarm clock, incoming SMS messages, as well as notifications from third-party applications, such as Note that the flash will only light up when the device is locked. if you are using the phone when you receive an incoming call, there will be no flash.

Using all the features of the iPhone will make working with it more convenient and productive. If you still have questions about this feature, feel free to ask in the Комментарии и мнения владельцев section.

In addition to this article, there are 12665 more instructions on the site. Add site Lumpics.We will definitely be of use to you again.

Thank the author by sharing this article on social networks.

How to turn on/off the flash when you make a call on your iPhone

The iPhone, unlike most other phones, does not have an event indicator light that would glow when you have an incoming call or SMS. But Apple has a special mode for the hearing-impaired, which means using the main camera flash to display incoming calls and notifications. If you want every call and message to be backlit, then you will need to turn on the flash on your iPhone. We will talk about how to do this in our article.

The question asked in the title of this article may imply two completely unrelated tasks. The first is more obvious. you need to disable the LED indicator in the “Camera” app. The second. its flickering during calls and notifications received on the iPhone. Below we will consider both solutions.

IOS 13 : How to Turn ON/OFF Flashlight When iPhone Rings

Camera app

If you want to take a picture without using the flash.

If you want to perform a similar task in a third-party application (a graphics editor with a built-in camera, a social networking client, a banking application, a barcode scanner, etc), you can use the flash to show the camera.д.), the algorithm will not differ much. find the icon with the image of lightning or flashlight in the interface and deactivate it.

Note: Some third-party apps that have a built-in camera always use the flash and do not allow you to turn it off.

Flash light on call

In the iOS Universal Access settings, you can make the LED indicator built into the camera module go off with an incoming call, incoming messages and notifications. This feature is especially useful for people with hearing loss and those who frequently switch their iPhone to silent mode, but do not want to ignore important events. Such a useful feature in some cases may still irritate the owner of a mobile device from Apple, as well as those who surround him, and therefore it should be turned off. We have previously written about how to do this in a separate article on our site, the link to which is below. Read more: How to turn off the LED indication when calling on the iPhone

Guide-Apple

If you started reading this article, you probably saw another iPhone owner’s flash blinking during a call. Convenient enough, isn’t it?

This flashing can be quite useful in life, because sometimes we listen to music loudly and many other situations. Let’s find out how to enable and disable this function.

Guide-Apple

If you want to stand out and put a flash on your iPhone when you call, today I will tell you how to do this and turn on or off this feature on your iPhone.

Before we start talking about how to get this feature on your phone, I’d like to tell you a little bit about why the flashing flashlight came into existence in the first place during a call.

This feature is originally designed for people who have hearing problems. But we’re perfectly capable of using it, too, since we don’t always have our phone in our field of vision.

And if you have loud music playing and your phone is at the end of the room, the flash may well get your attention and you won’t miss an important call.

Turn off the flash on the Apple iPhone during a call

The iPhone, unlike most other phones, does not have a light event indicator that would light up when you have an incoming call or SMS message. But Apple has a special mode for the hearing impaired, which involves using the main camera flash to display incoming calls and notifications. If you want every call and message to be accompanied by a light, you will need to turn on the flash on the iPhone. We will talk about how to do it in our article.

Leading author of many columns on the expertland site.ru. Well-informed in technology and electronics. Can solve any technical problem in a matter of hours, likes to write about his experiences and developments.

Smartphones, which almost everyone has now, perform hundreds of different functions, without which we can not imagine modern life.

The phone has long ceased to be just a means of communication, it is now: a miniature handheld computers, sources of information, entertainment center, placed in the hand.

One of the main advantages of “smart” phones is the ability to take photos and videos, which can compete in quality even with the material taken by professional cameras.

For this purpose, the phone has a lot of auxiliary effects and a flash that allows to achieve the best quality of photos, even at night.

The problem of a non-functioning flash, which is often used as a flashlight, is not uncommon even on flagship devices. Let’s try to understand why the flashlight does not work on your phone, and how to fix this failure.