How to disassemble the Redmi 6 phone

Touchscreen replacement

The difference between a screen and a touchscreen is that broken glass simply prevents you from using the phone, while a broken touchscreen prevents the sensor from working.

Changing the touchscreen is very similar to replacing the display.

• After removing the battery and motherboard, clean this area of glue residue and dust.
• Next, warm the phone again with a special hair dryer.
• If the screen is broken, use duct tape to keep the pieces from flying around or getting caught in your fingers.
• Using tweezers or other sharp objects, pry open the touchscreen and remove.
• Wipe and degrease the form for the display. We also recommend using isopropyl alcohol, but never a cloth dampened with regular water.
• Apply adhesive around the perimeter of the frame.
• After running all the cables, place the new module on the case. Do not apply too much pressure, the display will work just fine.
• Wait some time for the fixing process to complete.
• In reverse order, attach all components inside the phone.

Xiaomi Redmi 6 Screen Replacement

Step by step instructions

Make sure that the power is turned off before starting the process. It is worth waiting a few more minutes after pressing the button to complete the process. Then act in accordance with the step-by-step plan:

• Before opening the Xiaomi’s cover, the tray in which the SIM and microSD cards are inserted must be completely removed. To do this, insert the pin into a special hole and press slightly. After the gap appears, the part is picked up by the edges and pulled out.
• A spatula or its substitute is gently inserted into the gap between the screen and the back of the case and slowly moved, widening the gap, in the direction from the bottom corner to the top. If one edge of the latches have opened, do not jerk sharply and try to remove the panel in one movement, so as not to damage the device. You can use a suction cup, but only at the last stage and very carefully.
• When all holders will be detached, the back cover on Xiaomi Redmi can be removed, but you have to do it very carefully because of the risk of damaging the fingerprint scanner cable. To avoid tearing it, you need to pick it up with tweezers and set it aside (you can use the removed wall as a tray).
• To reassemble the gadget, all steps are performed in reverse order.

This instruction will also be relevant with other smartphones. If you need to open the cover in Xiaomi Redmi note 7, the actions will be similar. The only difference. it is not recommended to disconnect the fingerprint sensor stub completely, it can simply be thrown aside along with the panel to which it is attached.

Attention!

Before starting work, it is better to protect the screen with a special film. If you don’t have one, put tape on the display, and then carefully remove it when you are done. Thus, in order to remove the cover of the phone Xiaomi Redmi or other line of devices, you need only accuracy and patience.

Necessary tools

To disassemble the plastic case, you will need tools that have these characteristics:

• Reliability. They must be able to withstand the load.
• The smoothness of the contours and the smoothness of the surface. Sharp edges can scratch the surface of the smartphone during assembly and disassembly.

To open the lid of Xiaomi, you will need a spatula for repairing phones. Its functions in home conditions can perform a plastic guitar pick or a bank card.

To remove the old battery and install the new one, you need:

Screwdriver enlarges and transmits rotary movements of the hand to the small, specially sharpened working part.

• Perform disassembly on a level and clean surface. A table, nightstand or a wide window sill will be suitable for this process.
• Parts to be removed are placed in the order of their disassembly. This will help when reassembling.
• Hands must be washed or thin, special gloves must be worn before starting work.
• The room provides good lighting and ventilation.
• Safety precautions must be observed.

How to disassemble the Xiaomi smartphone: a step-by-step user guide

Disassembly of the smartphone may be necessary if any of its components is damaged for replacement (most often the screen, as other components are able to work without interruption for about 10 years), or for drying, if the phone was spilled liquid. Xiaomi devices can be easily dismantled, so many problems with them you can solve with your own hands, without going to the service center. The article will describe instructions on how to disassemble Xiaomi on examples of common models.

How to change the battery

The first thing you need to do is to check the model of the battery, so that it clearly fits the phone. After that it is necessary to proceed to replacement:

• We disassemble the phone according to the old scheme;
• Now remove the old battery using tweezers and specialized double-sided tape;
• Reassemble the phone;
• We check it on serviceability.

This way you can quickly and easily change the battery of your phone.

How to remove the back cover of phone Xiaomi

To open the lid Xiaomi real at home, you do not need to go to a workshop and pay for the work. You can do with improvised devices, no special equipment is required. The main thing. to strictly follow the instructions and do everything very carefully, any improper action or application of excessive force can result in damage to the body.

Features of the smartphone

Xiaomi Redmi 3s appeared on store shelves in 2016. Since then, many gadget lovers have acquired an attractive smartphone. Before we begin to take apart the Xiaomi Redmi 3s, we need to pay attention to the features of the gadget.

The main feature. a non-removable back cover. This feature is inherent in most modern smartphones such as Meizu M6 Note, Samsung Galaxy S8, Xiaomi Redmi Note 6 Pro and others. This fact complicates the disassembly a little.

Next, it is important to take a closer look at the elements of the Xiaomi Redmi 3c. On the bottom it has a microphone and MicroUSB connector. On the top is an audio jack, noise maker, as well as an IR port. On the left is the SIM card tray, and on the right. the power button and the volume rocker.

Almost the entire front panel is occupied by the display (touchscreen), and at the back there is a camera for photos, LED flash and multimedia speaker.

Disassembling Xiaomi Redmi Note 6 Pro

And again we take apart a mid-range budget device and this time we have the new Xiaomi Redmi Note 6 Pro. Let’s not procrastinate and immediately look at what is hidden under the cover. In Xiaomi stick to a common style of layout, so in part, each smartphone inside resembles the previous one. The very versatility which allows for a small amount of money just to improve the components giving the user the most “tasty” offer with good characteristics.
Let’s start the disassembly by removing the bottom panel, which also includes the communication module and the module for charging control together with the socket. A small protective cover, and under it the board itself. On the lid there is a unique number and a QR code with the part identification. Directly the module charging and sound on both sides.
Moving on to a quick removal and examination of the motherboardAll the main elements are under the protection and heat shields. Everything is fine on the back side too. Brazing at a high level. The placement of components is very tight, but competent. Almost forgot to show you the inside of the cover. Here is also the cable from the fingerprint scanner. Disassembled smartphone without boards. We only need to remove the battery and the display.

Disassembling Xiaomi Redmi Note 7 (photo video)

Today we got our hands on the Xiaomi Redmi Note 7, a new legend of reliability and budget price with great specs. You have already seen the unpacking of the novelty. Now we are preparing a full review, but in the meantime we offer to see what is hidden under the lid of the device. And at the end there is a video with full disassembly instructions. Let’s start with the general view of the components, and then consider in detail.First we remove the cover, then we need to disconnect the flat cable of the fingerprint sensor.
A view of the smartphone without a cover with the components inside.A closer look at the elements. As we can see the main elements are protected. The cover on the side of the loop and the inner part of the fingerprint.Remove card from phone case. The board from the back side. Here we also see thermal paste. Case without boards. The bottom part, still with the protection and see the warranty sticker.
Without protective cover. Power module separately. And also let’s have a look at the stub. Video disassembly of Xiaomi Redmi Note 7