How to insert a Samsung tablet SIM card

How to open the tray

After buying, the user of new technology was surprised to find in the kit of the device, incomprehensible “gadget.

insert, samsung, tablet, card

As it turned out later is a special key to open the tray for the SIM card. Simply insert the key into the hole on the tray and push and pull slightly. This can also be used:

Be careful! Try not to break anything inside the tablet computer. This could end up being a serious repair.

Instructions for iPad

Not all versions of iPads have 3G and 4G connectivity. A distinctive feature is the black plate on the back of the “tablet”. The picture below shows how to insert the micro SIM in iPad.

How to insert the SIM-card into a Samsung Galaxy. step by step instructions

If in the past to install the SIM-card in a smartphone, you had to remove the back cover and remove the battery, but now everything is a little different. phones are getting thinner, and their body manufacturers are trying to do (conditionally) not collapsible. How to insert a SIM card in a Samsung and start fully using your mobile device?

At the moment, almost all modern smartphones SIM-card and memory card installation is very similar to each other.

If the SIM card is not detected

It happens that the gadget does not access the Internet via the mobile network. Even if all the settings required for normal operation are set in the settings of the operating system, t. ะต. There is a situation when the tablet “does not see” the SIM card. In this case several faults are possible.

SIM card defect. This problem is quite common. For independent diagnostics it is necessary to remove the SIM card and install a known working SIM card from another device instead. If after such manipulations the network access will appear, then you can go to your mobile operator to replace the faulty chip.

Modem defect. If the SIM card used for the tablet works fine on other devices, there is a high probability of faulty equipment. In this case you should apply to a service center to replace the failed module.

Software defect. It also happens. To fix this problem you need to reflash the device. You can do it yourself, having previously downloaded the required files from the manufacturer’s website, or entrust the work to professionals from the service center.

The market of modern technology today is full of various devices for communication, communication and Internet access. Tablets are constantly improving, and each time there are more and more fashionable novelties. The famous Apple company produces tablets iPad and iPad Mini. Tablets that are equipped with 3G and GSM modules, which allows you to make calls with a SIM card inserted in these devices. Other companies are not lagging behind Apple: Samsung, Asus, Lenovo. Among the budget models. including Chinese little-known, you can also find tablets with a SIM card at quite affordable prices.

Since some time tablets began to be equipped with special 3G-modems and GSM-modules, which allowed the manufacturer to bring this type of devices to the next level of demand. But together with new.

Since some time tablets began to be equipped with special 3G-modems and GSM-modules, which allowed the manufacturer to bring this type of devices to a new level of demand. However, along with the new.

and more tablets are equipped with GSM or 3G modules, thus getting the opportunity to be online anytime and anywhere, not only in the Wi-Fi coverage area. But with the advent of tablet computers connectors for SIM-cards a fairly typical problem arose: The tablet does not see the SIM-card.

Two types of SIM-cards (SIM cards) are used: mini SIM and micro SIM. In some devices, where there is a 3G module, you can insert a SIM card for the tablet, what would be the access to the Internet via 3G. Some tablets can even use 3G to talk as a phone.

Make sure the tablet refuses to read the card specifically because of problems with it, you can check with any other tablet or phone. Just put the SIM card in another device. If the problem persists, go to the operator’s shop and get a new card for a replacement.

Check for SIM card support

  • Galaxy Tablets have two versions: one that supports the SIM card and one that does not. Consult your tablet’s user manual to find out if your Android device supports this function or not.
  • You can also look around the sides of the tablet or behind its battery for a slot where you can insert the SIM card. It’s a small slot that’s slightly larger than a memory card, and it’s very easy to find.

Insert the SIM card into the Galaxy Tab

  • For tablets with a SIM card slot on the sides, you no longer need to unplug the device before inserting the SIM card. For other models, you can disable the tablet before inserting the SIM card.
  • Once the SIM card is installed, you should see a signal icon in the upper right corner of the screen, letting you know that it is now connected and receiving signals from the SIM provider.

Installing the SIM card in the Tablet

Important! To install the SIM-card in the tablet, it must be turned off, some devices can operate in hot mode, ie, detects it without turning off, but most often without rebooting the tablet does not see the SIM-card.

After turning off it is necessary to find a place for the SIM card, the options may be different, in modern Huawei tablets it is inserted in a special slot, to open it, you must use a small paper clip that comes with. The carriage slides out of the tablet and places the card on it, regardless of the manufacturer, the appearance of the sim card is the same. rectangular with a truncated corner. In fact, it is difficult to misplace the card on the carriage, as there is only one position in which it will fit.

The second option. an open slot, this connector installed in the technique Asus.

Here the SIM card is just inserted into the body, to insert it correctly into the tablet you need to look at the icon next to the slot. It is marked with a picture of how it should be placed in the device, if it is inserted correctly you will hear a click, to remove the card should be lightly pressed on it with your fingernail. it will pop out as if pushed by a spring.

The third option. the slot is closed with a plastic plug, in which case there will be a small gap, which can easily be picked up with your fingernail. The side of the SIM-card installation in this case will again be indicated on the case. This type of slot is found in Samsung tablets.

The last option. a removable cover, often owners of Prestigio and Digma wonder where the SIM card is inserted into the tablet. These brands are among the few that allow you to use two cards at the same time. To install the device, you need to turn it upside down, there is a small width removable panel at the top of the device, and there is a slot in the center above the camera that you need to pry up with your fingernail. After removing the cover, the user will see a slot for the SIM card and microSD card. In this case, the card is placed with the token in the middle, the cut corner should be on top.

There are no other places in the tablet, if the question of where in the tablet the SIM card is inserted remains unsolved, refer to the technological documentation. There are recommendations on where and how to install it.

Most often, after inserting the card and rebooting the device, it will automatically detect the SIM card and start working. During the initial installation the tablet will receive an SMS with the settings, open and save them. In some cases, the tablet will have to configure it yourself, to do this, go to the settings and find the item “mobile network settings”. Then open “Access Points” and create a new point.

When creating a point, it is important to correctly specify the address at which the device will access the network. This point is called APN, different operators have different addresses, so you can check the correctness of the settings on the website of the operator.

The address usually looks like this: internet.tele2.For Tele2, it is not necessary to specify the APN and password, whereas Megafon and MTS may have them, so you will have to look up the information on the official site or go to the salon, in order not to make a mistake.

The way to insert SIM-card into Digma, Explay and Irbis tablets

Applies to tablets Digma, Explay, and the only way to insert the SIM-card into the tablet Irbis. even in the model 2021.

Here you need to remove not the entire back cover, as it was in older models of smartphones and telephones, but only a part of it. a narrow panel on the top or bottom edge of the case back.

  • Turn the tablet back to you, check where the removable panel is.
  • Pick up the panel by the special groove, pull it gently towards you and remove it from the case.
  • Insert the card into the slot, the correct way (which side) to insert the SIM-card into the tablet can be seen on a special drawing. it should be stamped next to the slot or directly on it.
  • Reinstall the panel.
  • Turn on the tablet and start using it.

The same instruction can be used for Prestigio tablet SIM-card installation.

Instructions for iPad

In the most modern models of tablets (Apple, Samsung, Nokia, etc.) the tray is removed from the car.The SIM card slot is designed in the form of a carriage, which is accessed via a special clip. In general, the operation is similar to replacing the SIM card in a regular phone:

  • On the body of the device, you should find the slotted tray, next to which there should be a special hole for a paper clip.
  • Insert the key (paper clip) into the recess and press lightly.
  • This action will cause the edge of the tray to bounce off the housing.
  • The tray is removed from the machine.
  • Correct location is detected.
  • Install the desired size symbol (usually nano).
  • The tray is pushed into the frame until the surface of the tablet is completely aligned.

You need to determine the correct location of the SIM card in the tray, it is usually designed to install 2 SIM cards or an additional memory card.

How to insert the SIM-card into the tablet Samsung, Asus

Turning to the issue of inserting the SIM card into the tablet, there are two basic types of installation. directly into the body or through a special tray. If you use the first option, you need to install the SIM card directly into the tablet. You remove the cover and install the SIM card in the slot, in the example there are three slots: two for SIM cards and one for the memory card, you can install the SIM card in each of the first two slots.

Most tablets use a special tray for the SIM card, here’s what it looks like:

To install the SIM card, you must first remove the tray from the case. This is done using a special paper clip, which usually comes with the device. It looks as follows:

If necessary, you can also use a paper clip. Take a paper clip and find the tray on the case, it is flush with the case, so it is not always well visible.

Insert a paperclip into the hole on or near the tray and the tray will “slide” slightly out of the chassis.

Hands gently remove the tray from the housing, which contained the SIM card.

Then insert the SIM card tray in the same way back into the housing until it stops.

Now the tablet will detect the SIM card, if necessary, enter the PIN code.

How to open the tray

After the purchase the user of new equipment was surprised to find a complete set of devices of incomprehensible “iron.

Inserting a SIM Card in the Samsung Galaxy Tab A. TabletConnect.org

As it turned out later. this is a special key to open the SIM card tray. Simply insert your key into the hole on the tray, gently press and pull. You can also use it:

Be careful! Try not to break anything inside the tablet computer, it may end up a serious repair.

Depending on the size

When cell phones first appeared in the lives of ordinary people, all SIM cards looked the same. The standard sim card. a mini one. was 25 by 15 millimeters and could easily be inserted into any cell phone of those days. But it’s been years.

Producers have decided to optimize the space in their devices. Apple was the pioneer.

It was on their iPhone 4s that the Micro SIM slot appeared in 2010. And later iPhones 5 series began to produce under the nano SIM. It is worth noting that all products with 3G, LTE and mobile Internet. including the iPad, equipped with trays.

On Android devices are found united slots with MicroSD, it is recommended to refer to the manual in order not to make a mistake.

Producers are actively introducing eSIM, which is a virtual SIM card that has no physical carrier. In Russia has not yet become widespread due to legislation, but all in good time.

Cut

When changing gadgets or buying a new tablet, it is often necessary to cut the SIM card to fit into the new size slot. The same service can be provided in the store when you buy a tech. You can do it yourself, you will need a template. Read more in this article.

The picture below shows how to reduce Mini to Micro.

Use an adapter

In cases where the card needs to grow, use a special adapter. It is worth noting that to date, all mobile operators produce cards in three variants. It looks like a standard micro SIM. It, in turn, must be carefully divided into mini and micro. The remaining pieces of plastic should not be thrown away. That they will serve as an adapter from one format to another.

How to properly insert and remove the SIM card from your tablet

How to insert the SIM-card in the “Samsung”. this question tormented many owners of tablets of this brand. If you did the same operation with Galaxy smartphones, then you know about the key. Without this tool, pulling out the tray is problematic. What to do with the new SIM card for owners of the Tab 3 and similar devices? Let’s start with the happy news. you don’t need a key for the tablet. Read our instructions. it’s all there.

Step by step: how to insert the SIM card into the tablet

Side outer slot with slide out tray

This option is present in the most modern models of tablets:

  • Pay attention to the edge of the tray with holes on the case.
  • Insert the key (or something similar) into the recess on one side, press it lightly and immediately release.
  • The edge will protrude slightly beyond the bezel, grasp it with two fingers and pull it (completely) outward.
  • The SIM card is inserted into the tray slot.
  • Insert the tray into the slot so its edge is flush with the surface of the case.

For Lenovo Yoga tablets SIM installation

To insert the SIM card into the Lenovo Yoga tablet, you must also remove the special panel. But it is located on the left side (as if we were looking at the back of the book) and detaches in a different way.

  • Put the second (inner) cover back in place, then snap the first, outer cover.
  • Unfold the SIM card as shown on the plastic above the slot. Insert it into the slot and push it in as far as it will go, you should hear a light click.
  • Turn the tablet back to you so that the rounded edge is facing you.
  • To the right of the button there is another cover plastic rectangle, pick it up with your fingernail and remove it.
  • On the panel (cover) covering the slots, there is an oval button.
  • Open the lid.

Not used to using a tablet, but mostly a phone, read our other article on how to insert the SIM card into an iPhone or a Samsung, for instance!

To remove the SIM card from the SIM card slot, use the instructions in the How to Eject section below

Note: The cover you remove to insert the SIM card into your Digma tablet covers the entire top of the device and the camera peephole inclusive. The panel itself is soft and easily detaches from your body.

Instructions for the iPad

Not all versions of iPad are equipped with 3G and 4G connectivity, The feature is a black plate on the back of the tablet, The image below shows how to insert a micro SIM card into the iPad.