Xiaomi redmi AirDots headphones do not sync

Xiaomi AirDots wireless headphones do not connect to the phone, what to do?

A distinctive feature of all fully wireless headphones, including the Xiaomi AirDots, is the need to sync them with each other. In some models, this process is automated well and the user by his actions can not break it, at least accidentally. In other samples, you need to strictly follow the sequence of operation, otherwise you can break the synchronization and when connected to a smartphone Xiaomi will play only one earphone, either right or left.

I suggest you read the brief instruction, which allows you to delete the settings AirDots and re-pair them to the phone Xiaomi, which will allow you to configure both the synchronization between the headphones, and the connection via Bluetooth with your smartphone.

Enter the Bluetooth settings on your phone, find in the list the name that you want to delete, press and confirm the intention of the button “Cancel pairing”. Next, we need to reset the settings in the AirDots, this is done as follows:

How to Fix Redmi Airdots Pairing Problem | Pair Both Airdots | Connection Problem Troubleshoot

• Remove both headphones from the case, they will automatically power on. Hold down the buttons on each of them until they stop flashing LEDs. This will take about 40 seconds. Place them in the charging case;
• Now you need to take them out, take out first the right earphone, and after a couple of seconds the left one. They will start flashing white, then red and white, then white again. At this point, the headphones should establish a connection with each other;
• Now, you must enter the Bluetooth settings on the phone and in the list of available devices, select the right AirDots and agree to pair with it.

If you follow these instructions, you will be connected in such a way that both headphones work at the same time.

How to properly synchronize Xiaomi AirDots headphones with each other

Place both headphones in the charging case, wait until they are fully charged. Erase the previous AirDots pairing information from the phone settings. Go into the Bluetooth section for this.

Take the case, take the earmolds out of it.

Disconnect the headphones: on each of the earplugs, press the touchpad/button with your finger (recall that the sensors have AirDots from “Xiaomi”, and mechanical buttons on the Redmi AirDots). Press the physical or touch controls for 5 seconds, or until the indicator light turns red. The headphones should turn off after this.

You should now perform two resets.

• The first reset erases the Bluetooth device information that was stored in the headphones. Press the touch panels on the earplugs for 10 seconds. The red and white lights will flash alternately and then turn off. Don’t let go of the sensor/button, hold down further to reset number two.

• The second reset erases the pairing information between the Airdots. Without releasing your fingers from the sensors after the first reset, press them for another 10 seconds. Wait for the light signals to appear again. This time the red and white lights should blink 3 times alternately.

In general, you need to press the headphone sensors for 20 seconds, and the LED signals will appear at the 10th and 20th seconds.

Turn on your Dots. This is done by pressing the buttons or sensors, which you need to hold for about five seconds. Or do it another way: put the headphones in the charging case and then take both “dots” out of it. Wait for about three seconds. “AirDots” will be automatically turned on, and pairing between them will be established. You will notice that the LED on the right “ear” will flash white, but there will be no light signal on the left. The flashing white means that the synchronization is complete, and now headphone R, that is, the right, and with it the left (because they are already paired) is ready to connect to the phone.

Activate Bluetooth on your phone to start searching for the earpiece. After a few seconds you will see the Mi AirDots BASIC_R found. R is the designation for the right earplug, which is the main earplug in the pair.

How to synchronize TWS AirDots with your Xiaomi phone

Place both earbuds in the charging case for about 10 seconds, then take them out.

• AirDots are removed from the case when the case is turned on and immediately begin searching for a device that you can connect to, but with the one they were previously paired with. But t.к. in the previous point we deleted the pairing on the smartphone, we need to put the headphones in a new pairing mode so that they sync with the phone. To do this, press and hold the touchpad on the right earpiece for about 7 seconds, you should see a red blinking diode, then it will stop;
• Now that the headphones are off, you must turn them on and immediately put them in pairing mode for synchronization by pressing and holding down on the right earpiece panel for about 30 seconds, this should cause the diode to flash red and white alternately;
• When the blinking started, put both headphones back in the case for 10 seconds, then remove them and put them in front of you;
• Take your smartphone, go to the Bluetooth menu. scroll to the very bottom, where the “Available Devices” section will be located. In it you should see the name of your AirDots. Click on it and follow the instructions on the screen.

In some cases, you will see a separate name for the left and right earphone, if that happens, choose the right one and synchronize your Xiaomi phone with it, t.к. it is the one that is leading the pairing. Once the pairing is complete, the sound should appear in both headphones, synchronization completed successfully.

How to synchronize headphones Xiaomi AirDots with each other?

Using headphones Xiaomi AirDots need to understand that your device (eg smartphone) is connected directly to the right earpiece. And already with him there is a connection of another headphone. In other words, the right earpiece is the main. The most common difficulty in using the Redmi AirDots headphones is their misalignment t.е. one earpiece works and the other doesn’t. It happens because there is no connection between them. How to synchronize AirDots read our article.

However, this by no means prevents the use of one earphone (for example, as a headset). To do this, simply long press on the touch panel of one of the headphones. The available device will display an inscription indicating which headphone is paired (e.g. Mi AirDots BASIC_R).

Xiaomi AirDots headphones quiet sound Decision

Why is there a low sound on AirDots. Ways to solve this problem and possible causes of the defect.

• Why is the sound of AirDots earphones faint?? Bought in the hope to enjoy, and then you have to listen.
• Does anyone know why there is no sound in the AirDots earbuds? Connecting seems to be correct, but the sound, then there is, then there is not.
• Good day to all. Why is there no sound on AirDots? Please help me deal with this defect.

Why is one earphone playing? Synchronizing AirDots

Wireless headphones Xiaomi already loved by many for their sound quality. However, some users encounter difficulties in synchronizing headphones from Xiaomi, specifically with Mi AirDots and Redmi AirDots models. The thing is that the way these headphones are connected involves connecting the smartphone not to the charging case, but directly to the headset. Unfortunately, this method of pairing is not without flaws and sometimes one headphone can not detect a mate, but not everything is as bad as it may seem. The way out of this situation is to reset the headphones. We will now take care of this issue.

First, turn off the headphones. Press the touchpad/buttons on each of the headphones and release when the red lights come on. The next step is to hold your fingers on the headphones again for about 30-50 seconds. At this time, the indicators will behave differently. At first, the white LED will blink looking for connected devices, but after 10-20 seconds, the LED will turn red and white. You should continue to hold your fingers on the panels/buttons until the headphones blink a couple of times and go out for a few seconds, and then blink a few more times.

What do we have in the end? The headphones are completely reset to “out of the box” condition. Put them in the case, wait until they are completely disconnected and you can start pairing. To do this, first take out the right earphone, then the left one. When they connect, find them in the list of Bluetooth devices, connect and enjoy music.

In the case where both headphones show up as two separate devices, connect to the right one, then turn on the left one so that it finds its mate.

It may not work the first time, but do not get frustrated. Try again.

In our store you can always buy Xiaomi headphones for a low price.

Non-working battery

Another reason for the inability to connect Xiaomi Redmi AirDots to the smartphone is a faulty battery. This can happen for a variety of reasons:

• The battery is completely discharged over a long period of time;
• Too much time in use;
• Incorrectly connected to the case USB cord.

When the cable is connected when the battery is not working, the earpiece flashes pink. In this case the device is not repairable, so a complete battery replacement is required.

And also the problem could be that the battery of the case is completely discharged. In this case, you will need to charge the case first, then connect it to the right and left earphone.

Solving frequent problems with Redmi AirDots headphones

Not so long ago, Xiaomi introduced the legendary Redmi AirDots headphones. why legendary ?

They are loved by many at first sight: its form factor and ease of operation, but in this article we would like to help users to answer some of the most common questions associated with this gadget.

Often, many users are faced with these problems:

• Left earphone does not connect to the right earphone
• Left or right earphone sound is quieter
• Headphones connect separately
• Headphones do not turn on when removed from the case
• Uncomfortable to put on
• How to understand that the headphones are charged?

And now we will tell in detail how to solve each of the issues.

The left earphone does not connect to the right Redmi AirDots

To fix this problem. you need to take. left and right earphone

And simultaneously press the physical keys from 30 to 50 seconds until they give a signal, the signal should sound exactly 2 times after which, connect only the right earpiece, turn on the music. and the left earphone will plug in automatically.

Press keys on left and right earphone

Connect right earphone to the phone

Check for dirt inside the ear cushion

Also depends on how tightly you inserted in the ear cup

AirDots headphones are connected only one by one

A signal will sound that the left earpiece connected successfully.

AirDots do not turn on when removing the charger case

Often this happens because the Charging Case is completely discharged. The headphones automatically refuse to connect to the device, because the case initiates startup and when it does not work the AirDots headphones have to be turned on manually. To solve this problem you need to put the case on a charge. and voila everything is working.

Try all ear cushions. At first they are medium size

Insert the headphones correctly as in the picture.

The headphones have an indicator light that has two colors

If the indicators are not lit when charging, it means. That their charge is 100%

What to do if the left earphone does not connect Redmi AirDots?

Absolutely and indisputably, the legislator in the world of gadgets and related products is Apple. Their Airpods Bluetooth headset is a role model. Since its inception, many manufacturers are trying to be guided by it and repeat. One of the most successful replicas at the moment has produced the company Lei Jun, the model was named Xiaomi AirDots.

Past sale days have led to the complete disappearance of these headphones from stores in their native China. Drop price (without discounts they cost about 25 euros), minimalistic design and at the same time support the latest types of wireless connection did their job.

People are interested in a cheap, but high quality analogue. However, some lucky owners of this model encountered difficulties in operation, in particular with the synchronous use of both headphones. That’s when one earpiece works and the other doesn’t. It is worth noting that this is a result of the pairing feature of these headphones (device-right earpiece-left earpiece), as opposed to the same Apple headphones are connected separately to the device.