How to connect the left earpiece Xiaomi

Xiaomi

Xiaomi Mi Air 2 SE: how to connect new ones, and what to do when they stop connecting

including the fact that this model is also initially oriented to work with both native Xiaomi smartphones and other Android models, as well as with the iPhone.

How to connect Xiaomi Mi Air 2 SE TWS headphones to your smartphone or tablet

So, the Mi Air 2 SE TWS model connects to an iOS or Android device as follows:

  • if the headphones are brand new (i.e.е. just out of the box and have never been connected yet), it is recommended that they be fully charged before the first connection (t.е. put them in the case and connect it to the USB port of the computer or charger via cable) or, if time does not allow, leave them for at least 10 minutes (and during this time the headphones should not be removed from the case);
  • Then take the charged Xiaomi Mi Air2 SE out of the case, after which the headphones should turn on and switch to pairing mode automatically (and if your smartphone is Xiaomi with MIUI and Bluetooth is not disabled, he will see the headphones himself, which will immediately notify the appropriate notification);
  • turn on the Bluetooth-module of the smartphone (Bluetooth Settings On);
  • find and tap on Mi Air 2 SE in the list of detected devices (if the system asks for the code, enter 0000 t.е. four zeros).
  • first, the Xiaomi Mi Air 2 SE is able to remember the last Bluetooth pair, that is, the smartphone or tablet, which was last connected to, the headphones find automatically;
  • Secondly, for the headphones to connect to the smartphone/tablet automatically, you just need to open the lid of the case;
  • Thirdly, the following Xiaomi models currently support the headphone detection notification function:

How to reset the headphones Xiaomi Mi Air 2 SE

This is for when in the process of using the smartphone stopped seeing the headphones, either they do not connect, or do not play, or only one plays. Such problems also sometimes happen.

That said, if the Mi Air2 SE has not been hit, dropped or bathed for a long time, in the vast majority of cases this kind of trouble is due to a software failure. Simply put, the headphones are glitchy.

Consequently, you can fix the problem in the standard and most effective way, namely, by the so-called “hard reset” of the headphones, ie.е. Forcibly reset their software to factory settings.

The problem is in the software

In practice, there are cases when the headphones fall off the smartphone due to a firmware update. I had similar problems when switching from MIUI 7 to version 8. With the release of MIUI 9 nothing of this kind was observed. For greater certainty, in particularly difficult cases of diagnosis when it’s unclear what’s to blame for a particular lack of contact, you can try installing current firmware on a previously formatted phone (factory reset).

connect, left, earpiece, xiaomi

MIUI 9 provides fine tuning of audio channels for successful listening. Go to Settings. Advanced Settings. Headphones and Sound Effects. If you connect the headset, you will immediately notice the pale icons “come to life” and become available: selecting the type of headphones, equalizer, and button calibration.

Here I want to bring to your attention a successful program that solves many problems with the connection of headphones and eliminates many unpleasant noises, crackles and the like distortions in sound during playback. It is a soundabout. You can download it in Play Store, the application is completely free.

The settings in the utility itself will help you normalize the sound, and most importantly, eliminate software (software) connection errors. The only drawback is that you won’t see an icon in the status bar when the headphone is plugged in. But the headset will work. Some users write that after the application once, after that everything goes back to normal. I have not tested it, but there are a lot of positive reviews about it. Suitable for the desperate, although a simple reinstallation of the system should help you.

How to use the headphones

Incoming calls To answer a call or end a conversation, tap twice on one of the Xiaomi Mi Earphones 2 Basic

Music Playback and Voice Assistant To play or pause music, tap the right earpiece twice. Or remove the earphone from your ear to pause playback.Tap the left earpiece twice to call the voice assistant

Notes 1. The voice assistant feature can only be used if your device supports it, and this feature requires permission on your device.2. When using only the left earbud, place the right earbud in the charging case and close the lid.

How to charge Xiaomi Redmi AirDots/Earbuds headphone case?

As you’ll notice, the Redmi AirDots and Xiaomi Earbuds wireless headphones don’t come with a power adapter, although there is a cord in the box. In order to charge the case, you can use any 1A power adapter, such as from a smartphone or an extension cord with USB ports. Even a jack on your computer or laptop will work. You need to plug the microUSB power cable with one end into the case and the other end into any cell phone adapter.

Check that the Xiaomi Redmi AirDots case is charging by the LED indicator, which is located on the front panel. It should glow red while charging

Pairing Xiaomi AirDots, Connect Left and Right Earphone

How to use the headphones (Xiaomi Mi 2 Basic)

Incoming calls To answer a call or end a call, tap one of the Xiaomi Mi Earphones 2 Basic twice

Playing music and voice assistant To play or pause a call, tap the right earphone twice. Or remove the earphone from your ear to pause playback.Tap the left earpiece twice to call the voice assistant

Notes 1. The voice assistant function can only be used if your device supports it, and this function requires permission on your device.2. When using only the left earpiece, place the right earpiece in the charging case and close the lid.

Setting up AirDots correctly

It does not matter whether the right or left earphone is not plugged in. The principle should be the same. First you need to do a Hard Reset. We’ve already done that. Now we need to configure the headphones AirDots. And this is nothing special, because after you reset them you have to take them out of the case. And usually the left earphone finds the right one. The problem is deeper. Since the incorrect setting of the headphones can be periodically repeated.

This happens because they are not working properly, incorrect internal software. It is likely that in future versions of this device these defects will be corrected by the developers. In the meantime, we just have to be patient. And restart them if the AirDots start working incorrectly again. One of the headphones may stop working after the device has run out of power. When we turn it on again after recharging, only one of them works. We have to repeat the described steps to fix it.

Does not connect one headphone Xiaomi (Redmi)

Xiaomi produces a wide range of products, not only smartphones, but also headphones for them, as well as a huge number of household products for every day.

Today we’re going to talk about Xiaomi wireless headphones, and what problems can occur with them during use.

At the beginning I want to tell a little about the principles of Bluetooth headphones Xiaomi. Each of them has its own Bluetooth communication module, and each can work separately in mono mode or together in stereo mode.

But the Bluetooth protocol doesn’t imply (at least before the Bluetooth 5 version).1) simultaneous operation with each of the headphones, so the connection to the phone is through one (most often the right one), then it synchronizes with the left one, so that the sound in them sounds simultaneously in stereo mode.

It is with the synchronization of the right and left gadget more often a problem that causes one earphone stops playing. It is strange, but for the most common problem there is no ready-made solution in the manual, although it is done with a couple of manipulations with AirDots.

What to do if one Xiaomi headphone does not play?

Why do not sync Mi true wireless headphones

When considering questions from users of the Web, wondering what to do if the Mi True Wireless headphones break, it is easy to understand that in most cases, the failures are observed precisely with the synchronization. That is, only one element. left or right. does not work.

First of all you need to understand the principle of the device. The system is quite simple. there are two headphones, but always one of them acts as the main. Most often it is the right element, although sometimes it happens and the left, but very rarely. That’s why almost always the left earpiece does not work. The point is that when you remove the device from the case, only the right unit establishes a connection with the phone. And the left in turn connects to it and synchronizes to work properly. This is the aspect that causes the problems.

The causes of why one of the elements is not working is easy to understand, because. к. This is almost always one of two options:

  • Software malfunction. Can be caused by anything and happens even in the most expensive and reliable devices. all settings are confused and the system does not work correctly. In this case, you need to remove the headphones from the phone, reset the settings and reconnect. This process is described in detail below.
  • User error when in the menu, he connects not the main right, but the left earphone. If in the menu when pairing the devices there is not one but two lines, most often at the end there is the designation “R” or “L”. And if you choose the second option, the phone will always connect only to the additional earpiece, and the main one will not work, t. к. connection is not made through it. In this case you just need to go to the menu, disable the wrong item and connect the correct one.

Important! It is not necessary to exclude a probability of a factory defect, it also occurs, though rather seldom. But such a problem occurs soon after the purchase, so you can replace the product under warranty.

Why in Xiaomi wireless headphones does not work one earphone

The problem in which one wireless headphone Xiaomi works, and the other does not work occurs as when you connect new headphones. As well as in the process of using headphones for several months. Usually the earphones just don’t connect to the phone together (both R and L earphones are available for connection in the phone). When I try to connect R headphone only the right one works, and the left one is silent. If you connect the left ear piece, everything repeats exactly the opposite.

In the case of the headphones used for a while, one of the headphones (often the left one) simply disconnects while the ear buds are working. After a while it may work again. But there are cases when the attempt of resuscitating the headphone ends up failing.

The causes of dysfunction usually boil down to the following:

  • Cheap electronic filling of the headphones. Cheapness of headphones forces to use for their creation components not of the highest quality. They are often unable to hold a connection for long periods of time, and any external sources of interference can upset the connection of the earpieces to each other;
  • Incorrect connection of headphones by the user. The owner of the headphones took them out of the case, and without waiting for them to synchronize, tried to immediately connect the phone to the left earpiece. The name of which in the list of Bluetooth devices usually contains the letter (L). Accordingly, the right earpiece in this situation can not be connected;

The procedure itself usually consists of connecting and synchronizing the main right earphone with the left one. After that, the right earpiece shows the signal ready to pair with the phone.

If you’re having trouble connecting one of the Xiaomi headphones, there are a number of steps we recommend you follow, as outlined below.