How to Connect Jbl to TV

Article

Modern technologies open up a lot of new opportunities for people. One of the latest achievements is a smart TV with integrated WiFi module. This means that TVs that support this feature can connect to the Internet using a wireless connection. This begs the question of how to connect WiFi to a TV? The technology is relatively new, so not everyone has time to understand how it works.

What is WiFi:. How to connect a TV to a wireless network

Before moving on to the question of how to connect the TV to the Internet, it is worth noting that first you need to organize a home WiFi group, to which you can later connect the TV. There are several ways to do this:

  • Via wifi router;
  • Using a laptop as an access point.

In any case, to access the Internet, a laptop or router must be connected to the global network. Then everything is elementary simple. Despite a fairly wide range of different TV models available on the domestic market, they all work on the same connection principle.
So how to set up wifi on the TV?

Connection to a router

So we came to the question of how to connect a TV via Wi-Fi to the Internet using a router. Everything is extremely simple here. First you need to connect to the global web and configure the router. If this has already been done, then just turn on the telly and enter the settings menu.

Next, we will figure out how to set up a Wi-Fi connection on a TV. Here you need to find the “Network” and turn on the wireless connection. In principle, there is nothing complicated in the settings. Getting information about the network occurs automatically, since the router has a DHCP function. This means that it automatically assigns an IP address to all devices that connect to it.

How to connect to a router:

To search for available connections, go to the “Network Settings” menu. Then just follow the on-screen prompts. Select the appropriate items and at the end you will see a list of available WiFi connections to which you can connect. Choose your router. If necessary, enter the key and click “Next” or “Connect.”

It is worth noting that if both devices support the WPS function, then the network settings are minimized, further simplifying the task for users. In this case, just press the corresponding button on the router. After that, in the settings for connecting the TV, select the appropriate item. Thanks to this feature, your TV will automatically start searching for the appropriate connections and establish a connection.

Connecting a TV to a laptop

Now you know how to connect the TV to the network via WiFi using a router. But, there are times when there is no router in the house. In other words, the user does not have a private home network to which the TV could be connected. In addition, sometimes you just need to play content on your TV on your computer. In this case, we need to create a direct connection to the laptop. Over, if it is connected to cable Internet, the TV will be able to access the global network.

First you need to arrange distribution. The laptop is equipped with the same wireless module as the WiFi router. This means that the computer can also act as an access point. To organize such a network, you can use third-party programs or built-in tools.

How to create a WiFi access point on a laptop:

It is worth noting that the computer’s firmware is more stable and reliable, unlike third-party applications. So, let’s look at how to create a private Wi-Fi group using a laptop using the built-in tools. To do this, open a command prompt. If you are using Windows 8, then press the WindowsX key combination and select “Command Prompt (Admin)”. In the seven, press the WindowsR key combination, in the window that appears, write CMD and press “Enter”.

Now just write the following command. Netsh wlan set hostednetwork mode = allow ssid = My_virtual_WiFi key = 12345678 keyUsage = persistent. It is worth noting that here you should strictly observe all spaces (where they exist) and use all characters only in Latin. This command will install the necessary driver and create the distribution. To start the network, write such a command. Netsh wlan start hostednetwork.

Our entire network is working and now it remains only to connect a TV to it. Everything is done according to the instructions described by us.

Setting up a connection to a TV

Now let’s look at how to connect a TV via WiFi. The fact is that modern TVs are able to simply play content from a laptop. But for this we need to share the necessary information, to provide general access to it.

This is done using programs that minimize settings to a minimum. The list of applications that help share content on TV includes:

  • Home media server;
  • Samsung Share;
  • Share Manager.

In addition, there are many programs, but the above utilities are most widely used due to their ease of use. You just need to install any of these programs on your computer and run it. They automatically find, photos, and audio content, sharing files with them.

First of all, in the program settings, you should select the device that will play the content. Choose our TV.

After that, it is recommended to specify the folders that contain the files and allow scanning. Next, click the “Run” button in the toolbar.

I work as a private computer master. Professionally engaged in computer repair for more than 12 years, as an amateur since the 90s.
For two years he worked as the head of a service center specializing in connecting subscribers to the Internet and computer help.

Source

Tablets, mobile phones and other gadgets have entered our lives and it is now difficult to imagine the existence without them. Now also sound devices are becoming individual. The JBL line of speakers is a compact device that can be connected to any tablet, phone or laptop in a variety of ways, including using Bluetooth technology. How to connect the JBL speaker via Bluetooth to a laptop and phone, we will consider in this article further.

How to Connect Jbl to TV

Connect the speaker to a mobile phone

  1. We connect the JBL column via Bluetooth to the phone
  2. Connecting a JBL speaker and a Windows laptop via Bluetooth
  3. Instructions for connecting the speaker to a laptop with Mac OS X
  4. Useful tips when using speakers and devices

We connect the JBL column via Bluetooth to the phone

Bluetooth synchronization is the most common, because no additional cords or applications are required to connect. This connection method is standard for all mobile phone operating systems. Most often, a JBL speaker is purchased in order to connect it via Bluetooth. Wherever you are, you can connect to a speaker and enjoy your favorite music or radio station. To do this, you need to follow a few simple steps:

  1. Place 2 devices side by side, phone and speaker.
  2. On devices you need to enable Bluetooth.

JBL speaker

  • To turn on the technology on the column, hold the corresponding button on the control panel until a characteristic signal. Flashing the rim around the button in blue and red means that the column is ready for pairing. The button can be released.
  • On the phone, turn on the Bluetooth tab. “Search for devices.” After the device column (JBL Charge) is found. Click on it to connect.

    • Connecting a JBL speaker and a Windows laptop via Bluetooth

    Now consider connecting a speaker to a laptop with Windows installed. For this:

    1. Connect the JBL speakers to a power source.
    2. Place the device closer to the speaker so that the laptop detects the signal as quickly as possible.

    Windows laptop

  • Turn on the Bluetooth speakers. Press the button in the form of the Bluetooth icon and hold until the signal. When the column is ready to connect, an indicator will start flashing around the button. In blue and red.
  • In a laptop, you must click on the “Start” button in the lower left corner.
  • Next, you need to open the “Parameters” item, on different versions it is in different places, in Windows 8 and 8.1 the button will be located at the bottom left, in the general block, with the gear icon.
  • Click on the “Devices” item. It is located at the top of the Options page.
  • We find the item “Bluetooth and other devices.” It will be on the left of the page.
  • Turn on bluetooth. The slider at the top of the Bluetooth page. To the right of the slider is the status bar. It should “tell” us “On”.
  • Now you need to add the device. JBL column. We make a click on the button “Add Bluetooth or another device.” The button should be located at the top of the screen of the page where you left off.
  • Click on the “Bluetooth. Option at the top in the Add Device window.
  • The name and model of the column should be displayed on the screen, for pairing you need to click on it.
  • At the last stage, you need to click on the “Pairing” button. The button is located below, to the right of the column name. Done. Now you can enjoy the music played by the laptop through the JBL speakers.

    • Instructions for connecting the speaker to a laptop with Mac OS X

    Owners of laptops with an operating system from Apple can also connect a JBL speaker. To do this, you need to follow a few simple steps:

    1. Turn on the speaker, place it closer to the laptop and activate Bluetooth by pressing the appropriate button.
    2. On the laptop, click on the “Bluetooth” icon in the upper right part of the monitor in the drop-down menu. If it is not in the menu, you need to open the general menu, go to “System Settings” and press “Bluetooth”.
    3. Open the Bluetooth settings. An option at the very bottom of the menu. Turn on bluetooth. Instead of this button, the “Turn off” button may be displayed. Which means that the technology is already on.
    4. The process of finding a device on a laptop will begin. When the device is found, you need to click on the “Pairing” button to connect the speaker. After a while, the connection will be made, and you can hear the music played on the laptop from the speaker.

    JBL Column Menu Bar

    Source

    Tablets, mobile phones and other gadgets have entered our lives and it is now difficult to imagine the existence without them. Now also sound devices are becoming individual. The JBL line of speakers is a compact device that can be connected to any tablet, phone or laptop in a variety of ways, including using Bluetooth technology. How to connect the JBL speaker via Bluetooth to a laptop and phone, we will consider in this article further.

    Connect the speaker to a mobile phone

    1. We connect the JBL column via Bluetooth to the phone
    2. Connecting a JBL speaker and a Windows laptop via Bluetooth
    3. Instructions for connecting the speaker to a laptop with Mac OS X
    4. Useful tips when using speakers and devices

    We connect the JBL column via Bluetooth to the phone

    Bluetooth synchronization is the most common, because no additional cords or applications are required to connect. This connection method is standard for all mobile phone operating systems. Most often, a JBL speaker is purchased in order to connect it via Bluetooth. Wherever you are, you can connect to a speaker and enjoy your favorite music or radio station. To do this, you need to follow a few simple steps:

    1. Place 2 devices side by side, phone and speaker.
    2. On devices you need to enable Bluetooth.

    JBL speaker

  • To turn on the technology on the column, hold the corresponding button on the control panel until a characteristic signal. Flashing the rim around the button in blue and red means that the column is ready for pairing. The button can be released.
  • On the phone, turn on the Bluetooth tab. “Search for devices.” After the device column (JBL Charge) is found. Click on it to connect.

    • Connecting a JBL speaker and a Windows laptop via Bluetooth

    Now consider connecting a speaker to a laptop with Windows installed. For this:

    1. Connect the JBL speakers to a power source.
    2. Place the device closer to the speaker so that the laptop detects the signal as quickly as possible.

    Windows laptop

  • Turn on the Bluetooth speakers. Press the button in the form of the Bluetooth icon and hold until the signal. When the column is ready to connect, an indicator will start flashing around the button. In blue and red.
  • In a laptop, you must click on the “Start” button in the lower left corner.
  • Next, you need to open the “Parameters” item, on different versions it is in different places, in Windows 8 and 8.1 the button will be located at the bottom left, in the general block, with the gear icon.
  • Click on the “Devices” item. It is located at the top of the Options page.
  • We find the item “Bluetooth and other devices.” It will be on the left of the page.
  • Turn on bluetooth. The slider at the top of the Bluetooth page. To the right of the slider is the status bar. It should “tell” us “On”.
  • Now you need to add the device. JBL column. We make a click on the button “Add Bluetooth or another device.” The button should be located at the top of the screen of the page where you left off.
  • Click on the “Bluetooth. Option at the top in the Add Device window.
  • The name and model of the column should be displayed on the screen, for pairing you need to click on it.
  • At the last stage, you need to click on the “Pairing” button. The button is located below, to the right of the column name. Done. Now you can enjoy the music played by the laptop through the JBL speakers.

    • Instructions for connecting the speaker to a laptop with Mac OS X

    Owners of laptops with an operating system from Apple can also connect a JBL speaker. To do this, you need to follow a few simple steps:

    1. Turn on the speaker, place it closer to the laptop and activate Bluetooth by pressing the appropriate button.
    2. On the laptop, click on the “Bluetooth” icon in the upper right part of the monitor in the drop-down menu. If it is not in the menu, you need to open the general menu, go to “System Settings” and press “Bluetooth”.
    3. Open the Bluetooth settings. An option at the very bottom of the menu. Turn on bluetooth. Instead of this button, the “Turn off” button may be displayed. Which means that the technology is already on.
    4. The process of finding a device on a laptop will begin. When the device is found, you need to click on the “Pairing” button to connect the speaker. After a while, the connection will be made, and you can hear the music played on the laptop from the speaker.

    JBL Column Menu Bar

    Source