How to change the Mac address

Article

How to change the MAC address in Windows 11/10

change, address

  • WinX ” “. ” ”
  • “” “Network Adress, 12.
  • . “”.

How to change your computer’s MAC address

Every computer, notebook or any other device that connects to the network has what is called a MAC address. This is a unique identifier “stitched” into its network card by the manufacturer.

However, Windows settings can be changed so that instead of the “embedded” MAC address, the computer’s network card uses a different identifier.

Why I need it? For example, many ISPs use MAC address identification to make their services available to specific users. If you buy a new computer, you can’t just connect it to such a network. It would take either contacting the ISP or changing the MAC address of the computer to the one of the previous. For obvious reasons, the second option is more convenient.

There may be many other reasons for changing the MAC address.

Through “Device Manager

Perhaps the easiest way to change your computer’s MAC address on Windows 10 is to use ” Device Manager “. In “Device Manager”, you can open the properties of the network card and set the desired Mac address for it.

In Windows 10 you can open the ” Device Manager ” in several ways. You can right-click on the ” Start ” button (or press Win-X key combination) and then select the appropriate item in the window that opens.

How to change Windows 10 MAC Addresses. WiFi and Ethernet

Also in Windows 10 ” Device Manager ” can be opened with the command ” devmgmt.msc “. In this case you need to press the key combination Win-R. Enter the command and press the enter key.

Either way, you will see the ” Device Manager ” window in front of you. Open Network Adapters and find the NIC whose MAC address you want to change. Let’s try to change the Mac Address for Realtek PCIe GBE Family Controller.

Note that each network card has its own unique MAC address. So it is important not to mix up the NICs and make the change for the NIC that needs it.

After this, right-click on the desired network card and go to the properties.

In the properties of the network card select the “Advanced tab”, scroll through the list of properties and find the item “Network Address” (or “Network Address”). This is the Mac address you need to change.

To change the MAC-address: Select the “Network Address” radio button and enter the new MAC-address in the “Value” field.

Note that the Mac address is written in hexadecimal. So you can use numbers (0-9) and English letters (A-F) for the new value. For example, you can specify ” AB12AB12AB12 “.

Close all open windows by pressing the “OK” button and reboot the computer in order to save the settings. After restarting the selected network card will get a new MAC address.

MAC address is a unique alphanumeric number given to any network device by the manufacturer. It consists of 12 characters (often displayed in six pairs, separated by a colon). As characters are used numbers from 0 to 9 and first six letters of Latin alphabet from A to F. The uniqueness of this address allows it to identify a particular network device on the network and deliver the intended data only to it. Operators, who provide Internet connection service, often use binding of a subscriber to a physical address of a network device. Thanks to this, each subscriber uses only that package of services, which is provided only to him. But what if the subscriber installs a new network card or changes computers? Correct, it is necessary to apply to the operator for registration of a new mac-address, otherwise there will be no “kina”. In fact, you can do without this procedure. After all, a new network device can be assigned a different address (different from the one specified by the manufacturer), which was already registered with the provider. Here are two instructions for Windows 7 and XP.

How to change mac address in Windows 7

To change the mac address, open the Network and Sharing Center. To do this, click on the network icon and select the appropriate menu item.

In the window that will open, click on Change adapter settings.

Right-click on the network adapter, which is connected to the Internet, and from the context menu select Properties.

In the connection properties, click on the Configure button. This will open the network card settings window.

In the window that opens, select the Advanced tab, select one of the following items: Network Address, Network Address, Locally Administered Address, or Locally Administered Address. In the right side of the window, check the box next to Value and type in the 12 characters of the new mac-address. After that click on OK and reboot your computer.

How to change the mac address in Windows XP

In order to change the address in Windows XP you have to click on Start and select Control Panel. In the Control Panel, open Network Connections. If you don’t see it, click on Switch to Classic View in the left column.

In the window that will open, right-click on the connection that connects to the Internet, and click Properties.

On the General tab click on the Configure button. This will open the network adapter settings window.

On the Advanced tab, select Network Address (or Network Address). In the “Value” field enter the mac address.

To check if the MAC-address has changed, go to Start Programs Accessories Command Prompt, and in the window that opens type ipconfig /all

How to Change the Mac Address of a Network Card in Windows: Changing the Physical Address

Hi! Today I will tell you how to change the MAC address of your computer, or more precisely of your network card which is used in a WAN or LAN. For example, in my case was necessary when I bought a different NIC, and my provider was using the binding with the physical address.

There is still a lot of hoopla going on on the Internet about whether you can change the MAC address of your NIC or any device? I can give you mixed answers, yes and no. The physical MAC address that is hard to change is actually hard to change, because you need special hardware to do it. But in Windows systems, most often used software MAC address of the network card, and it just can be changed. That should be good enough for most tasks.

PROFESSIONAL HELP! If you don’t understand anything you just read, or have any difficulty, you can always ask me in the Комментарии и мнения владельцев, and I’ll be happy to help you.

How to change your Mac address

Windows

On Windows PCs and laptops, you can use the system’s own tools to change the mac. Provided that your network adapter driver supports this feature.

  • Launch Device Manager, expand the list of network adapters, right-click on the one you are interested in and select Properties.
  • Click on the Advanced tab. Find Network Address in the list of properties and in the Value field, type in the new Mac.

If you do not see the above parameter in the list of properties, then your network adapter driver does not support the change.

Experienced users can write mac address directly in the system registry in the section where network adapter settings are stored. The easiest way to do this is to use the command line with administrative privileges.

Reg add “HKLM\SYSTEM\Setup\Upgrade\NetworkDriverBackup\Control\Class\4d36e972-e325-11ce-bfc1-08002be10318\####” /v NetworkAddress /t REG_SZ /d 000000000000 /f

Instead of #### and 000000000000 you need to substitute your data:

#### is a registry subfolder like 0000, 0001, 0002, etc. д. In these sub-folders, the parameters of the network interfaces are stored in their own sub-folders. To find out which sub-folder to write to, you will need to open it in the registry and in the list of values to find a reference to the name of the desired network adapter. The same as in Device Manager.

Instead of twelve zeros write a new Mac address without spaces, hyphens and other symbols.

By the way, you can change mac on a Windows computer in BIOS, but only with the help of special service software, which is not designed for regular users.

Mac OS X

Changing Mac address on Apple computers is done using the same terminal that helped you find it out. Simply run the following command in the terminal: sudo ifconfig en0 ether 00:00:00:00:00.

Instead of zeros after the word ether write the new address, separating pairs of characters with colons.

Android

To change the mac address on your Android phone or tablet, you need root rights and special software. For devices based on MediaTek CPUs it is convenient to use free MTK Engineering Mode service utility.

  • To get access to the MTK Engineering Mode, tap on MTK settings. From the Connectivity list, select Wi-Fi or other network interface. Open the NVRAM section.
  • Type in add(h,byte) number 4 and in the next line length(byte) number 6. Press Read. Below in the value(h) field, you will see current physical address of the adapter. Just erase it, write a new one (without spaces, hyphens and colons) and press Write button.

The second way to change the poppy is available for owners of devices with processors from other manufacturers, but unfortunately it does not work on all devices. In addition, you will have to install a paid utility called Root Explorer.

  • Start the Root Explorer and browse to the /data directory.
  • Find and open a text file named nvmac in any editor.info. If you don’t have one, create one. To create and save an object in this directory, you must activate R/W (read and write) rights
  • Write in.nvmac.info enter a new Mac address, separating pairs of digits with colons.
  • Open the permissions window for that file through the menu and check the read rights for all.

Routers

The procedure for changing the Mac address on routers is called cloning. It is so-named because instead of the factory mac of the router the system substitutes the Mac of the computer that is connected to it. However, you can write either address instead of a clone.

The method of cloning a physical address on different makes and models is almost the same. The only difference is the interface.

To change the parameter of interest on your TP-link router (Archer C20 firmware is given as an example), open the Network and Clone MAC Address section. In the box on the screenshot, type in a new value and click Save.

How to know and change the MAC address of your computer

Not many users have to deal with such a concept as “environment access control”. Maybe I was on the wrong side of the tracks and should have called things by their proper names. We are talking about MAC, a unique identifier which is given to every hardware inside a PC. In this article, I will tell you how to change the Mac address of your Windows 7 computer. 10.

MAC address is a unique identifier that is assigned to each piece of equipment. Cloning a Mac address allows you to replace a real physical address with a virtual one. How to temporarily prescribe a second address, giving it all the powers of the first.

By doing this, when replacing your router, you don’t have to ask your ISP to give your new router access to the Internet. It is enough to change the MAC-address to the one which gives the router access to the internet (i.e. to put the physical Mac-address of the old router into the new one). How to do it? First, determine the ID of the router you want.

How to change the MAC address of the adapter

For this I will also give you two ways.

In the network card settings

Follow the familiar path to the “Network Control Center”, click on the connection and click “Properties” in the window

You can also get there through the “Network and Sharing Center. Changing the adapter parameters”

Then find the card, the MAC-address of which you want to change. I have several connections in the screenshot, but I only need one.к. The others are disabled:

Right-click on it and select “Properties. In the next window, click “Configure” under the name of the card:

Now go to the “Advanced” tab and search for “Network Address” or “Physical Address” (also possible choices are “Locally Administered Address”, “Network Address” and “Locally Administered Address”), put a switch on the input field and paste there the necessary MAC address.

To turn it all back on, just put it back the way it was.

With special programs

It is useful, if the settings of your network card do not have the right parameters.

Technitium MAC Address Changer

Select network card in the main window:

In the Change MAC Address window, type in a new Mac address, or click Random MAC Address to set a set of random numbers. Use the Change Now button to apply the settings!

macshift

The easiest program is macshift.

Works from the command line and requires no installation. To change the MAC address, run the utility with the following parameters:

macshift.i Connection Name 00112233AABB

where the numbers “Connection Name” look in the “Network Connections” window. My name is “Realtek”, you might have “Local Area Connection”:

Ryll MAC Changer

Since the command line is not very convenient to use, the “Ryll MAC Changer” GUI tool is much more useful, but it needs to be installed.

The only window of the program looks simple:

Here you select the network card, write a new Mac address for it and click “Update MAC”. In order for the changes to take effect, you must either restart your computer, or go into the “Network Control Center. Changing the adapter settings”. Right click on the connection and select “Disconnect”, then “Enable” again. The button “Reset Default MAC” in the program will help to reset the old MAC.