Not updating iPhone update requested

Iphone

Check the internet connection

As the firmware is downloaded only if the internet is available, interruptions will appear as an inability to update the downloaded application. If the main source of traffic is mobile internet, check your account balance, network, or megabytes remaining. In the case of Wi-Fi, make sure it is working properly; connect to another source or test using a different device.

Note! You can call someone you know who also uses an iPhone and ask how they are doing with updates.

Reboot iPhone to fix Failure to check for update

Before you start fixing the inability to check update error, you’d better reboot your router and make sure your iPhone is connected to the Wi-Fi network.

When you encounter an iOS update check error, you are likely to get an iPhone system network error. If this happens, you may want to reboot your iPhone to reconnect to the network.

You can use the usual way to turn off your iPhone. Simply press and hold Power on until the power off screen appears. Then swipe from left to right to turn off your iPhone.

Or you can open the app “Settings” and click General Shut down your iPhone.

Wait 2-3 minutes and then keep pressing the power button to reboot your iPhone. Then you can go to the software update interface and do iOS Update again.

Updating iOS from the gadget

Once the preparations are complete, you can move directly to install the new software. You can do this in several ways. The easiest is to use the gadget.

  • Go to the settings of your smartphone.
  • Open the “General” section.
  • A new window contains an item “Software update”.
  • After tapping on the appropriate name, the iPhone will check for an available update. This process may take some time. After that the screen will tell you if the new firmware is available. If it is not there, you will receive a message that the newest software is installed. When the update is available, it will be displayed on the screen. You will need to download it to your iPhone by clicking on the appropriate button. Here you can also view information about the software, which features will appear, and which bugs will be fixed.
  • It will take time to download the update. Also, note that the firmware requires free space in the storage. The download will be done over the air. It means that it is necessary to take care of a good wireless connection and it is better to have an unlimited one.
  • Once the new OS is downloaded, you can install it. To do this you just need to click on the button which is located in the same section.

You cannot use your iPhone while reinstalling the software. The update itself takes quite a long time. Getting a new version can take from 30 minutes to several hours. But in most cases the entire process will be done within an hour.

After installation is complete, you may need to enter your iCloud password or AppleID. Also, you will need to unlock your iPhone with a password, only then will TouchID or FaceID be activated.

Bought an iPhone 11 Pro for 90k. And it won’t update

“I love iPhones because they’re stable and hassle-free.”. You often hear that from iPhone fans who do not even want to look at Android smartphones because of their “bugs. Bought just yesterday iPhone 11 Pro for 90 thousand did not hear about all this. The first day it simply did not want to update to the new firmware. Including iTunes! I have never seen anything like this before.

Error 1671 indicates that the computer is downloading the necessary software. Wait for the download to finish and try again.

The appearance of one of the following errors may mean that your computer is unable to connect to Apple’s servers or your iPhone, iPad, or iPod touch device.

  • 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200
  • “There was an error while loading the software.”.
  • “Device is not supported for the requested build.”.

When error 4037 appears, it means that the device cannot be updated using a computer because it is password protected and has not been unlocked to perform an update or restore. Unlock your device and try again. Find out what to do if you can’t remember your password.

If you keep getting this error message, contact Apple Support.

[Solved] 4 easy ways to fix iPhone hangs when checking for an update

Every major iOS update, such as iOS 15, iOS 14, iOS 13, iOS 12 or iOS 11, brings so many exciting new features to the iPhone, iPad and iPod. So, as an iOS user, when there is an iOS update available, you can update it as soon as possible. Nevertheless, it is very likely that it will get stuck on the “Check for Update” screen when installing the new iOS, just like the latest version of iOS 15. You encounter the same iPhone stuck when checking for an update situation?

When you install the iOS update, you see a pop-up message with a “Confirm update” indicator on the screen. In most cases, your iOS device will pass the interface after a while and start updating normally. But there are many more reasons the iPhone can’t check for the update and is stuck there. This post will share 4 effective solutions to fix stuck iPhone when checking update including latest versions of iOS 15, iOS 14, iOS 13 and iOS 12.

Installing iOS 10.x stuck on “update requested“. what to do

When installing an over-the-air version of iOS 10, users often have problems even at the stage of downloading the update. It simply won’t execute, and your device reports that the update is requested. And that would be OK, but the battery charge is literally melting before your eyes because of the error. Fortunately, it’s quite easy to fix the problem.

1 way (recommended). Install an update via iTunes

If iOS wireless setup hangs on “Update requested” message, it indicates an internal error. You can get rid of it in two ways described below, however, it is recommended not to take the risk and install the update via iTunes.

All you need to do is to connect your iPhone, iPad, or iPod touch to your computer, launch iTunes, and click “Update. You can learn more about the process of installing iOS through iTunes in these instructions.

2 way. Force Reboot

Many such problems can easily be fixed by a simple hard reset. To perform it, hold down the Power and Home buttons (the volume down button on your iPhone 7/7 Plus) until the Apple logo appears on your device. After turning on your iPhone, iPad or iPod touch go to Settings → General → Software Update and try to download the update.

the way. Turn off/on the internet

Sometimes an Internet connection error is responsible for freezing the iOS installation at the stage of requesting an update. Therefore it often helps to get rid of the problem by switching the mobile device to air mode.

Why update iOS

Many users wonder what will happen if you don’t update your device at all. Why do all this if your iPhone works fine as it is? In fact with each update, the developers of Apple make the device better, they add more changes, new features and remove the bugs of previous versions.

This way you will be able to use your phone for a much longer period of time. In addition, many applications in the AppStore system are simply not able to work with the old firmware.

How to update your iPhone, if it does not update

You can update your iPhone in several ways. The easiest way is through the iTunes software. However, if you want and have free time, this can be done manually.

Via iTunes

The first thing you must do is to download iTunes and connect your device with a cable. Further procedure consists of the following steps:

updating, iphone, update, requested
  • Launch the iTunes application. If the connection is correct, in the upper left corner you will see the name of the gadget, click on it.
  • In the “Main settings” menu, turn on the update checker. It may take from several seconds to 1 minute.
  • From the list of proposed versions you need to select the most suitable variant and click “Update.

Booting will begin, during which you should not disconnect your phone from PC and watch carefully its charge. For some devices you will additionally need to enter the iCloud security password.

Phone may restart several times during update process. This is normal.

FIX iOS Update Error! (Estimating Time Remaining / Update Requested Error!)

Manual update for advanced users

This is a complicated update, but its main advantage is that it does not require connection to your PC and downloading of special software. To perform it, you need to do the following:

  • On the gadget, go to settings, where select the “Basic” item.
  • Then, scroll to the inscription “Software update” and click on it.
  • It takes a few seconds to search for available versions.
  • You should select the appropriate package, accept the terms and agree to the download.

This method consumes more power, so it is important that the phone is plugged in to avoid draining the battery. During the installation of updates you may have to reboot the device several times and periodically need to confirm the action.