How to switch the TV to a set-top box without a remote control

Article

To do that, press the Home button on the remote, then click on the gear button in the upper right corner of the screen, then select General, select Home or Store Mode, and set the Home Mode.

You can enter the main menu with the Menu button or a long press on the Power, or on the central button of the joystick. It all depends on the model of TV. A list of TV settings appears on the screen. You can move up and down with the volume buttons.

If there are keys on the device, it is not difficult to switch the digital set-top box without a remote control at all. For switching channels there are buttons signed “CH” and “CH-“. For changing the volume: “Vol” and “Vol-“. All important functions are simply duplicated on the housing.

switch, set-top, remote, control

If you can not see the buttons, they can be hidden. Check the side and back of the case. Also the keys can be hidden under the front panel. You can carefully lift the cover and find them there. But be careful. cheap devices are not equipped with buttons. In this case it is not possible to switch the TV set-top box without using the buttons. And you will only damage the case if you try with force to bend the lid and peek into it.

Another option is why you can not see the buttons when they are touch screen. Touch the different surfaces of the receiver to check this. The soft keys do not stand out over the cabinet, they may not even be labeled. But just the same allows you to control the TV set without the remote.

How do you turn on the AV mode on your TV if you don’t have a remote control?

I got an old CRT TV for free, which in turn was found thrown near the trash. The TV itself did not work originally and I fixed it, but since there is no analog TV, to watch it you need to connect a T2 console or, as in my case, a Dandy add-on to it through the tunnels. But the question arose how to turn on the AV mode in the TV if you do not have a remote from it. I tried all the remotes I had, and none of them could switch the AV mode on, even the universal remote control, which I had high hopes, but alas, for my TV, it did not fit.

How to turn on the AV mode on TV if there is no remote control

How to turn on the AV mode on your TV if you don’t have a remote control

There is no button on the front of the TV set to turn it on. At first I advised to flip through the channels to the last one and then turn on the AV mode but it didn’t work.

But then I thought logically, I realized that in the TV processor must be an input, which at a certain logic level can be turned on AV to connect the external video signal. Looking at the circuit for a television, which I downloaded from the Internet, I found there this pin of the chip, but I do not know what it should be fed to it the logical level, to enable the mode, I decided to feed it 5 volts, but nothing happened.

I’ve read a few articles on the Internet and found the answer to my question. If your TV has a SCART connector you can turn the AV mode on. If we look at the pinout of SCART connectors we will see that pin 8 is responsible for switching AV/TV.

How to change TV to Input mode (without remote control)

How to turn on the AV mode on your TV without a remote control

How do you turn on the AV mode on your TV without a remote control?

It remains only to find in the nearest place of the TV board 12V and solder wire, and its second end through a 1 kOhm resistor neatly solder to the 8 terminal of SCART. I have a 12v socket next to the TV tuner (channel selector). Now you can connect any set-top box to the TV set via tulip and the TV screen will display the image from it.

How to turn on the AV mode on your TV if you don’t have a remote control

How to turn on the AV mode on your TV without a remote control?

But later we found out one peculiarity of this way of switching the AV/TV without remote control is when you disconnect the TV set from the socket then when you turn it on again the TV set will be switched to TV mode. To switch to AV mode you must first switch off the TV set (without removing the plug from the socket) using the power button and immediately switch it on using the same button, the TV set will be switched to the mode you want.

How to turn on the AV mode in the TV if there is no remote control

How to turn on the AV mode on your TV if you don’t have a remote control

To configure the TV “Vityaz”, you need to go to the service menu. To do this, you need to put the TV in standby mode, then press the AV button on the front panel, then turn on the TV, holding the button.

In order to connect the set-top box you need to follow the following steps:

  • Connect a cable RSA Jack to the TV and set-top box;
  • insert the game cartridge into the console;
  • Connect the power supply to the mains;
  • start the selected game;
  • Switch the channel to AV.

AV mode is activated by pressing the P- button on a channel smaller than 1. Setting is carried out by using the menu button on the chassis, moving the program and volume buttons. Use the Source button to select the AV connector on the side of the TV.

To switch to AV, you must first switch the TV off (without pulling the plug) using the power button and then switch the TV on using the same button.

Alternate ways to turn on your receiver

Before you turn on a TV set-top box without a remote control, you need to understand its type and device. There are several different ways, which I will describe in more detail below:

  • turn off and on the receiver in the network;
  • Using the keys on the TV device body;
  • Using a smartphone and a special application (like an online remote control on your mobile device).

plug in

This is the easiest option, which will work for most receivers such as “Smart TV”. If you don’t know how to start the TV set-top box without the remote, then follow these steps:

  • Unplug the device from the mains. Simply pull the plug out of the socket.
  • Wait for about 15-30 seconds for the internal batteries to discharge and the gadget completely turns off.
  • Plug it back in.
  • The device will turn on and you can switch to its channel on your TV: HDMI or AV.

But this way of starting a digital TV set-top box without a remote is not very practical: you’ll only turn it on. For more actions with your receiver, check the options below.

buttons on the case

Unfortunately, not all TV boxes have buttons on the box. This is where they differ from TVs, where the buttons are always present, even if they are inconspicuous or hidden. However, even in the case of receivers there may be a variant when the keys are present, but you have not noticed them.

  • Examine the appearance of the case. Sometimes you don’t need to look for the buttons. Pressing the start button will turn on the Smart STB without the remote control.
  • Perhaps the “Power” key is on the back of the case, next to the ports. Maybe it’s touch-sensitive: not mechanically pressed and not obviously noticeable. Gently palpate the case.
  • In some cases you need to lift the front cover: the buttons will be “hidden” there. But do it only if this is stated in the manual. Otherwise, you can apply excessive force and break the case. This is especially likely in the case of cheap devices. And at the same time in such budget devices there will be no mechanical buttons.

This way with the keys on the case is very convenient. I recommend that you find out if your receiver has keys before you buy it. Their presence is a definite plus when choosing a device. It immediately removes the question of whether you can turn on the console without a remote.

mobile app

You’ll be able to use the digital TV set-top box without the remote control in almost full mode if you connect it to your smartphone. It’s best to do this ahead of time as long as you have everything working properly. The setting in this case is very simple. And you can choose from several applications that will replace your remote control in future “critical” or just urgent situations.

switch, set-top, remote, control
  • Connect your device to your Wi-Fi network.
  • Download the app on your smartphone. Just enter a request like “remote for TV set-top box” in Google Play. You can add the name of the brand of the device. maybe there is a special software for it.
  • Download and install one or more apps. You will be able to choose the best one and delete the rest.
  • Run the application on your smartphone and follow the instructions that are listed there. often than not, you need to select a device and pair it. Sometimes you need to install an app on both your smartphone and receiver.
  • After pairing the devices, you’ll be able to turn on the set-top box without the remote control as soon as any force majeure occurs.

However, in some cases, this option will not work:

  • Controlling Android set-top boxes from your iPhone is usually not supported;
  • there may be a conflict of Android versions on the phone and TV device, or a conflict of application versions;
  • A certain app may simply not be suitable for your gadget. In this case, choose another program.

replace with a universal

Among the previous three ways, there is always a working one, which allows you to run a digital set-top box to your TV without the remote. But if you have such a possibility, I advise you to replace your gadget with a universal device. You can set it up to the receiver and the TV at the same time. If you have difficulty with the original equipment, consider this solution.

To switch now in AV switch you need from the power button first turn off the TV (without pulling the plug out of the socket) and using the same button turn it on immediately, the TV will be switched to the desired mode.

If the remote control LED is working but the device is not responding to your commands, then most likely the problem is not with the remote control. Do not forget to make sure that the device and the remote control are in line of sight with respect to each other. If the remote control shows no signs of life, you should first check the batteries.

  • simultaneously press the already familiar Ok and TV buttons;
  • enter 991 ;
  • Successively press the channel switch button;
  • When the correct password is found, the screen should go off;
  • at this moment press Ok.

For switching channels, the buttons signed “CH” and “CH-” are responsible. To change the volume: “Vol” and “Vol-“. All important functions are simply duplicated on the housing. If you cannot see the buttons, they may be hidden.

Automatic reconnection: Point the remote control at the set-top box. 2. Press OK and TV simultaneously and keep it pressed for two seconds until the LED on the TV button blinks twice. You’ve switched the remote to programming mode.

How to switch from radio to TV mode All digital receivers, without exception, have a button to switch from radio to TV and back. Usually this button is called TV/RADIO, less often TV/R or just RADIO. It is with her you can go back to watching TV channels.