How to enter BIOS on an HP laptop

BIOS startup process for Hewlett-Packard (HP) notebook computers in Windows 8 and 10 operating systems

The owners of modern Hewlett-Packard (HP) laptops will definitely need an excellent reaction to quickly find, and even have time to press the necessary key in time during OS boot. And also do not miss it, while a hint on how to enter the BIOS is visible on the screen.

However, this is not all. Nowadays, laptops have solid-state SSD drives instead of conventional mechanical HDDs. The performance and responsiveness of laptops is greatly improved and the boot process for Windows 8 and 10 is very fast. Therefore, it makes no sense to turn on and off the laptop many times in order to be in time.

On a note! In order to enter the BIOS menu, it is not at all necessary to turn off the laptop.

For users of Windows 8 and 10 operating systems, do the following:

    By clicking on the “Start” button, click on the line “Options”.

In order not to enter the BIOS every time through Windows, we need:

    In the “Start” menu we find the section “Control Panel”.

After these manipulations, you can start the BIOS by pressing one of the keys on the laptop.

How to enter BIOS in HP laptop

It’s great when the laptop works and does not cause any complaints. Nevertheless, any user has situations when it is necessary to change something in the settings, in particular, it may be necessary to reconfigure the BIOS. As soon as you open any forum or article on setting up laptops, you will notice that it often discusses how exactly to enter the BIOS in laptops from Hewlett-Packard (HP), Asus, ACER, and other companies. This suggests that in many devices there are nuances associated with starting the BIOS.

In this article, we will analyze several issues, namely:

  • what is BIOS;
  • BIOS keys for Hewlett-Packard (HP) notebook computers;
  • BIOS startup process for Hewlett-Packard (HP) notebook computers in Windows 8 and 10 operating systems.

BIOS keys

It is best to consult the laptop manual for help. However, more often than not, little is written in it. In the box with the gadget, except for the power supply, warranty card and other documentation, there is usually nothing.

Since there are many models of Hewlett-Packard (HP) laptops, there is no specific standard for entering the initial BIOS settings. Below we will look at the most common options.

First, turn on the laptop or reboot the system.

Immediately after turning on the screen, do not miss the inscription, during the appearance of which it is possible to start the BIOS. As a rule, such a line is delayed only for a few seconds, and then the OS starts loading.

Read more:  Galaxy watch won't connect to phone

It is at this time that certain keys must be pressed:

HP laptop internal menu

  • “F1”. provides all information about a Hewlett-Packard (HP) laptop: model, serial number, build date, BIOS version, processor type, frequency, RAM, etc.;
enter, bios, laptop

What is BIOS

BIOS is a set of firmware that is operated by the basic input / output system in every computer. The functionality of the system makes it possible to configure the parameters of the motherboard and devices connected to it without using the OS. This system is installed on all motherboards.

On a note! Since the BIOS is not affected by all kinds of failures, bugs and viruses in the operating system, if it does not work, we can use the settings in the basic menu.

Typically, users run the BIOS only when the OS needs to be reinstalled. In fact, it has a lot more customization options that can dramatically improve the performance of your laptop.

  • monitor the loading and order of devices connected to the laptop. For example, a user can make it so that not Windows boots first, but a CD / DVD-rom or a flash drive;
  • regulate the efficiency of the CPU, carry out its “overclocking”;
  • determine the factory settings of the computer;
  • adjust the time and time zone;
  • select OS language, set passwords, and so on.

Hello! The question is as follows How to enter the advanced settings in a laptop HP-G62?

How to enter BIOS / UEFI on HP notebooks

Good afternoon!

On HP laptops, the BIOS entry is somewhat non-standard (if on most devices the F2 or Delete buttons are used, then they have ESC). over, this often happens through add. system menu. This is probably why not every user is able to immediately deal with this issue.

In addition, it is also worth noting one more point: the year the device was released. Depending on this, the login process can “subdivide” into a couple of more options. In general, everything is somewhat confusing.

Perhaps it’s time to finish the introduction, and go directly to the solution of the issue. so.

Multiple BIOS entry options on HP

1) If you are dealing with a relatively new device (

If your laptop is new, then when you turn it on, it will not show any boot screen (note: on older devices, after turning on, a boot screen with keys to enter the BIOS was shown).

How to access BIOS on HP laptop

Like it or not, but now there is such a tendency of manufacturers (including HP): to load Windows as quickly as possible and present the user with the opportunity to switch to work with the OS (and, as a rule, because of this, it is impossible to enter the BIOS / UEFI).

Therefore, immediately after pressing the power button. press the ESC key in sequence (several times!). A system menu should appear (as in the photo below) with several options (note: to enter the BIOS, you need to press F10):

  • F1. viewing system information;
  • F2. diagnostics;
  • F9. viewing the boot menu;
  • F10. entering BIOS / UEFI settings (what we need!);
  • Enter. continue boot (Windows).

System menu on HP laptop (called by the Esc key)

If you do not have time to press the ESC button before Windows boots, then you can hold down the ESC button before turning on the laptop (and hold it until the system menu appears).

Read more:  What is a walkie-talkie on Apple watch

By the way, also on some laptop models, you can immediately press the F10 key after switching on (i.e. enter the BIOS without an intermediary in the form of a system menu).

2) If your laptop is already old enough.

How to. access the BIOS and UEFI settings on Windows 10 HP Laptop ( select Boot Device Priority )

In this case, immediately after switching on, you should display a boot screen (most often it contains a button to enter the BIOS settings menu). The photo below shows a couple of options (in one case, the F10 key is used to enter. In the other ESC).

Note! Also note that on laptops manufactured before about 2008, the Delete button can be used to enter the BIOS.

3) If you have Windows 10/11 installed.

In this case, you can enter the BIOS without pressing any system buttons at all (however, the method is suitable if the system is booting for you, and you can open its parameters).

So, first open the START menu and go to the system parameters (see the screen below).

Then open the “Update and Security” section. the “Recovery” tab. It should have a “Restart Now” button (see special download options).

enter, bios, laptop

Next, your laptop will be rebooted, in the menu that appears, select the “Diagnostics” option. after “Firmware parameters”. Actually, now you entered the BIOS / UEFI settings (see screenshots below).

F1, Delete, F11. Pay attention to these buttons as well. Some devices (mostly old ones) only support these keys to enter BIOS (when you press ESC.on these laptops nothing will happen).

Specification. Pay attention to the documents (if, of course, they have been preserved) that came with the purchase of the laptop. Almost always they contain similar information.

Connect the device to the network. The fact is that some laptops do not allow entering the BIOS when running on battery power (I do not know if this was done on purpose, or a “glitch”.).

I also recommend that you read a large article with tables for entering BIOS on devices from different manufacturers..

enter, bios, laptop

How to enter BIOS in an HP laptop?

The need to launch the interface arises for various reasons. In some cases, users need to change the boot priority from the HDD to a bootable USB flash drive in order to further update, reinstall or install the operating system. In others, you can view detailed information about the equipment connected to any computer or laptop (motherboard, RAM, video card, processor, frequency and number of cores, etc.).

The Basic Input / Output System is often used to test and reconfigure hardware components. It is worth noting a useful option to reset BIOS settings to factory settings, which will come in handy in case of software glitches and malfunctions in the OS. So, let’s figure out how to enter BIOS on your laptop.

How to get into BIOS on a new HP laptop model?

This manual applies to modern Hewlett Packards manufactured after 2013. Often, when you turn on the computer, the screen simply does not have the information we need with the designation of the basic buttons.

After turning on the laptop, you need to consistently press the ESC button (3-4 times). You can also hold it down immediately before starting the laptop. A special window called Startup Menu will open, which includes the following items:

  • F1. System Information. You can find detailed information about the system here.
  • F2. System Diagnostics. The utility is responsible for OS diagnostics.
  • F9. Boot Device Main Options. The boot menu is displayed.
  • F10. BIOS Setup. You need to press the corresponding button to go to the BIOS / UEFI shell.
  • F11. Recovery Tool. Can help restore your drive.
  • Enter. continues to launch Windows.
  • F12. configures network parameters and server.
Read more:  How to Enter the Engineering Menu on Xiaomi

Where is the BIOS entry key on older laptops?

Older (up to 2013) HP notebook models use different BIOS versions, so the Basic System Configuration launch buttons may differ. Before loading the device, you can see the inscription at the bottom of the screen. Most often these are F10 and ESC. Less commonly. Del, F11, F1, F6, F8.

There are also keyboard shortcuts Fn F1, Ctrl Alt Delete, Ctrl Ins, Shift F10 (for example, HP Pavilion G6, Compaq 6820s, 6910p and others).

There are rare cases when the user cannot get into the interface due to the fact that the laptop is running on battery power. Plug it into power from a wall outlet.

Easy options to enter HP BIOS in Windows 8.1 and 10

Unlike Windows 7, XP and Vista, users of “eights” and “ten” may not see the menu of system buttons when turning on laptops / netbooks due to the active fast boot mode. Let’s consider the procedure for disabling this function:

  • Right-click on the Start menu;
  • Select “Control Panel”;
  • We need a section “Power supply”, if it is not displayed, change the display from categories to large or small icons (located in the upper right part);
  • On the left side of the window that opens, select “Actions of the power buttons”;
  • Then go to the section “Changing parameters that are currently unavailable”;
  • A little lower, in the same window, a tab with OS shutdown settings will appear;
  • To disable Fast Boot, uncheck the “Enable Fast Startup” item and save the specified changes;
  • Now try turning off the laptop, and the next time you turn it on, a screen with the necessary information will appear.

We go into UEFI using the diagnostic function

  • Click on the notification icon and select “All parameters”;
  • Click “Update and Security”;
  • After clicking on the “Recovery” line, under the “Special boot options” section, you need to click the “Restart now” button;
  • When the computer restarts, you will see a special menu in which you need to select “Diagnostics”;
  • It remains to go to the “Advanced Settings” item and click “UEFI Firmware Settings”;
  • We reboot the laptop and get into the installed BIOS version.

How to enter BIOS settings from a laptop from the welcome screen?

The method is useful for Windows 8 and 10 owners with a locked logon. That is, in front of you there is only a welcome window asking you to enter the password, but you either forgot it or witnessed the consequences caused by malware or incorrectly installed drivers.

  • Press the “Power” button and simultaneously hold Shift;
  • A small window will open, click on restart;
  • Then we act similarly to the above paragraph from our article.