How To Check Battery Status On Ipad

How to check battery capacity on iPhone and iPad

Very often, Apple technology users are faced with the problem of the autonomy of their i-devices. In this article, I will show you how you can check the battery on an iPhone or iPad. How to check the number of charge / discharge cycles of the battery of Apple devices. And how to tell if your iPhone battery is dead. That being said, you don’t need JailBreak.

In order to check the capacity of your iPhone battery, some recommend installing a program on your phone that requires JailBreak. Our method works without JaiBreak’a. Well let’s get started.

Before checking the battery status of your device, make sure you read the article on saving iPhone and iPad battery in the article How to save the battery power of iPhone and iPad.

In order to check the battery on your iPhone or iPad, you only need a computer, iPhone / iPad and the cable from the device and the iBackupBot program. (download iBackupBot)

Next, install the program, connect the phone, wait while the program initializes your iPhone / iPad. When this happens, select the phone in the list of devices and you will see the following screen and click on Information:

After that, you will be presented with all the information on your battery, as well as other useful information:

I will give a decoding of some of the names of the values:

• Cyclecount. The number of cycles (discharge-full charge);
• Designcapacity. Factory size of the battery (battery size declared by the manufacturer);
• Fullchargecapacity. The amount of full charge (the amount of the battery when fully charged today);
• Status. Status (as I understand it, is the battery working);
• Batterycurrentcapacity. Current battery level.

This way you can check the battery status of your iPhone / iPad. If the volume of full charge (FullChargeCapacity) is much less than the factory volume (DesignCapacity), then most likely you need to replace the battery. I got these results by checking the iPhone 4S battery that has been working since 2012, you can see it by the number of cycles (CycleCount), and nevertheless, the current battery volume is 90% of the factory one (1300/1430), which is an absolute norm.

If the program indicates the health of your device’s battery, then you should read the instructions on how to preserve the iPhone and iPad battery in the article How to save the iPhone and iPad battery.

UPD2: I ran into a completely new device the other day and checked its battery for the sake of interest. I decided to share this information with you and show a screenshot of a completely new battery:

If your ratio is less than 70-60%, then this already speaks of the old age of the battery and it should be replaced. And in the case of a rapid decrease in this ratio, it indicates a complete malfunction of the battery (if there is a constant drop in the FullChargeCapacity volume).

UPD: in the comments they began to write so much that the version of the program is not the same, I am not a cake, there is no link, the phone is not visible, and in general the interface is different, that I was not too lazy to download the latest version of the program (5.5.3) and post even more screenshots for people.

I hope this will save readers from the difficulties of checking the iPhone and iPad battery, and will lead to even more likes and reposts of this page and comments of thanks.

Have a question? Is there something not clear in the article? Do you want to thank? Write a comment!
If you liked the article, and even more so if it also helped. Put 1 and click “Like”!

Imazing

The only app available for Windows and Mac is also available in two different versions. One of them is paid, and the other is actually free for you. Just download this app to your Mac or Windows.

How To: Check Your iPad Battery Health

For example, Apple was fined at the time for lowering the iPhone battery with an upgrade. But according to Apple, it depends on how the user charges the device. As a result of this issue, Apple has added a feature to check iPhone battery health. This service is still not available for iPad users. We’ll talk here about why you need to check the battery status of your device.

The performance of each device is affected by the iOS version, RAM usage, and response time, which is also dependent on performance. If the battery condition gets worse, you will notice a slow response from the device. It can also cause the camera to freeze or slow down. You should also check the battery status when you charge your device overnight. Hardware problems can also arise from the lithium battery. Therefore, you should check the battery status in your device.

If you want to know how to check the battery status of your iPad or Mac, you’ve come to the right place. I’ve highlighted the second part so you can skip the above paragraphs if you don’t want to know why.

How to check iPad battery status

Update for August 2020:

We now recommend using this tool for your error. Plus, this tool fixes common computer errors, protects you from file loss, malware, hardware failures, and optimizes your PC for maximum performance. You can quickly fix problems with your PC and prevent other programs from appearing with this software:

• Step 1: Download PC Repair Optimizer Tool (Windows 10, 8, 7, XP, Vista. Microsoft Gold Certified).
• Step 2: Click “Start Scan” to find Windows registry problems that may be causing PC problems.
• Step 3: Click “Fix All” to fix all problems.

Connect your device, tap the battery icon that you see on the first screen of the app. There is no need to worry about the battery details as you will see a message that depends on the battery level. If the device battery is low, the message “Device battery status is good” appears.

Battery life by Robert Tkotzyk

An application for measuring the state of the internal battery of your iPhone or iPad. Recently appeared on the Apple App Store and I would like to share with you today.

The main goal of Battery Life. Measure your iOS device’s current maximum internal battery capacity (mAh) and compare it to the original capacity (mAh). This measurement will give you an idea of ​​how worn out your battery is.

A battery that can be charged to a maximum of 80% of its original capacity should indicate that it is time to consider replacing it. (Apple claims your iPhone battery is designed to hold at least 80% charge over a large number of charge cycles.)

In the photos above, the battery status shows that the maximum battery capacity of my iPhone is 1,336 mAh, while the original factory capacity was 1,550 mAh. This corresponds to 14% battery wear.

For example, a 14% wear rate means you can expect a 14% reduction in processing time for talk, navigation,, audio, and more. Battery life gives you the approximate time you can expect to use for various activities when you consider Apple design specifications for your device model and current battery life.

Battery status (Macos only)

With Battery Health, you can easily view all the important information about your MacBook battery, such as current charge level, capacity, power consumption, charge count, and more. Be sure to check the Tips section of the app to find out how to improve your MacBook’s battery life. Why wait? Download the app for FREE and learn more about your battery than you ever imagined! Detailed statistics and information about the health of your MacBook battery.

Coconutbattery (Macos only)

Coconutbattery. It is a very small Mac applet that provides a lot of details about the battery status of your iPad. After downloading and installing the application, open it, go to the “iOS Device” tab, and you will see all the necessary information about the battery of your iPad.

Key details. Full charging capacity and rated power. The first one shows the current charging capacity of your iPad, while the second shows its initial capacity. The greater the difference between them, the worse the battery.

In addition, under the Design Capacity section, you will find the percentage obtained by dividing the total charging capacity by the design capacity. All in all, you don’t have to worry about battery replacement. Or switching to a new iPad. Until this value falls below 80%. I have 92.5%, so I have nothing to worry about yet.

How to check iPhone and iPad battery health as accurately as possible on PC

One of the best ways to check.

There are several different ways to check the battery health of your iPhone and iPad. The most accurate of these, using the coconutBattery application, assumes that the user has a Mac, which, of course, many do not. Fortunately, you can check battery health most accurately on Windows computers, and it’s completely free. This manual told how.

An example of the Life Battery application.

Because of this, iPhone and iPad users are strongly advised to check the battery status of their mobile devices using special computer utilities. On Mac, this program is coconutBattery, and on Windows computers, iTools or iMazing. In both cases, the check is absolutely free.

How to check iPhone and iPad battery health as accurately as possible on PC

Step 1. Download the iMazing utility from the developer’s official website. Install and run the program.

Note that after launching, iMazing asks for activation. It is not required to perform it, since the required battery status check function is available completely free of charge. This request should be clicked “Later”.

Step 2. Connect your iPhone or iPad to your computer with a USB cable. The device will be identified in iMazing. If this does not happen, then it means that your iPhone or iPad was not detected in iTunes before. It is required to launch iTunes and allow the mobile device to trust your computer.

Step 3. On the device page, click on the battery icon.

Done! The window that opens shows technical information about the battery of your iPhone or iPad. Pay attention to the line “Maximum effective charge”, which indicates the remaining battery capacity in numerical and percentage terms. Important! If the battery of your iPhone or iPad is old enough, for example, its level of residual capacity is 85 percent or less, then the indicator in the line “Maximum effective charge” in iMazing and iTools will jump, this is due to the chemistry of lithium-ion batteries. However, the drops will be about 1-2%, which will make it possible to get an understanding of the real state of the battery.

How to get battery performance information on Apple devices.

Let’s guess: Like most of us, you are likely to constantly charge your devices, even if it could damage your battery. Many people leave their phones to charge overnight, mistakenly believing that the charge will last much longer.

One of the best forms of preventative maintenance that you can easily perform for any Apple device is to periodically check the battery health. We don’t mean the percentage in the right corner of the screen. We’re talking about a hidden parameter that can give you an idea of ​​how the battery of your Apple device is doing.

Despite the fact that there is practically nothing you can do, if your battery is really terrible (unless you replace it with a new one), you will at least realize that your device is approaching the state of “ancient”, and it is time for you to get rid of your habits. Which “suck” life from your smartphone or tablet.

If you are lucky, you will find a “dying” battery while your device is still under official warranty. In this case, replacing the battery will not cost you a penny.

Today we at 1Gai.Ru will tell you about how to check battery health on all Apple devices.

What about iPad?

The bad news: You can see your charging and usage charts just like on the iPhone, but on the iPad you won’t find a separate Battery Health section that gives you a specific idea of ​​battery life. To do this, you need to turn to a third party application. For example, go to iMazing or coconutBattery for more accurate battery information.

On iMac

When you upgrade your computer to macOS Big Sur, you will see that the Energy Saver section is no longer in System Preferences. In its place there was a section “Battery”. It’s not hard to guess where it leads.

Click on the icon, and you will see a picture that you could already see on the iPhone. You will get information about how many times you have used the battery in the last 24 hours or 10 days, and you can also access all previous power saving settings, including scheduled start and shutdown of your Mac.

Unfortunately, as with the iPad, you won’t be able to see the overall health of your computer’s battery. You can get an idea of ​​how many charging cycles your battery has gone through by clicking System Information and then going to the Power tab under Hardware.

There you will see the number of cycles of the battery, information about its condition and maximum capacity, and you can also compare the number of cycles with Apple limits.

Iphone

To see how well your iPhone’s battery is performing, open the Settings app and tap Battery. Wait a bit and you’ll get a series of graphs that show the battery level (and activity) over the past 24 hours or 10 days.

This is all very cool, but that’s not what we need. Click on “Battery status“. In this section you will see the current value of the battery capacity as a percentage of the new state. At low values, you may need to charge your device much more often.

Don’t worry if you get below 100%. Remember, this is just data. If your iPhone can still handle your day without a problem and you are not experiencing significant performance degradation due to its low battery, there is no reason to worry.

You may want to upgrade to a new phone (or replace the battery) at some point, but this is not necessary unless you experience noticeable problems with daily use of your phone or tablet.

How to check battery health on iPhone, iPad, iMac, and Apple Watch. On Apple Watch

After you upgrade to watchOS 7, you can check your device’s battery status right on your wrist. Open the Settings app and tap Battery. You will see a graph showing the charge on your Apple Watch for the past day.

Scroll down and tap on Battery Status, where you can see the total battery capacity of your Apple Watch. Agree, it’s very simple! As with other Apple products, don’t worry if this number doesn’t match what you expect.

As long as you can get through the day without needing to recharge your Apple Watch, don’t run to a service center to replace the battery.

Get more accurate data with Life Doctor

The Apple Store has some pretty good apps that will let you check the health of your battery. However, one stands out among them, as it is incredibly simple and, equally important, completely free.

If you can get used to the annoying advertisements, Battery Life Doctor can provide you with information on your battery. No screen jumble or unnecessary nonsense. We opened the application and looked at the required data. There are several different sections in the app, but you only need the Battery Status. Click on the “Details” button for more information on the status of your battery.

A window should appear in front of you, in which you will immediately find the necessary information about the state of the iPhone battery. In the middle it will be written in a huge font, what is the state of your battery. Plus, importantly, there you will also see the percentage of battery wear, i.E. The percentage of its degradation during operation. Do you think you will have no problem calculating the maximum capacity of your battery at the time of testing? If the wear percentage is 9%, then its maximum capacity will be 91%. Well you get the idea.

In addition, on this screen you can also see information about the voltage supplied to the battery, the remaining percentage of charge, the maximum capacity (see, you don’t even have to count) and whether your iPhone is currently connected to the charger or not.

Ask Apple Support

In the past, if you wanted to know the battery status of your iPhone, you had to go to the Apple Store with the device yourself and let them diagnose it. However, a similar procedure at the moment can be carried out remotely.

Perhaps this will be the best way to obtain such information. Visit Apple’s support page and speak with someone over the phone or via dedicated chat. You can also send a support request via Twitter.

If you write to them on Twitter, they will ask you to send them a personal message with the serial number of your iPhone and the version of iOS on which it is running. They will then help you diagnose your battery, which can be done through the device settings.

Once the diagnostic process is complete, you will need to notify the support representative about this and then he will let you know what the state of your battery is. In general, everything is quite simple.

The disadvantage of this method is that Apple does not provide accurate information in this way. They will tell you for sure that your battery is in excellent condition, or at least fair. If you want more accurate data, you can use the methods below.

How to check iPhone battery status?

The iOS operating system includes several useful tools for displaying a device’s remaining battery power as a percentage. Plus, it also has a special tool that will tell you in detail which app is using the most battery. However, none of this will tell you the remaining life of your battery, which is incredibly important information for any user.

Battery status vs. Battery charge

Some users do not understand the difference between the two terms: battery status and battery charge. Battery charge refers to how long your smartphone can operate on a single charge. The battery condition determines how much the device’s battery has worn out during its use. After a year of use, the condition of your battery will not be exactly the same as it was at the time of purchase, and it will only continue to deteriorate further over time.

Surely some of you have or have an old iPhone that needs to be recharged every few hours, as its battery flatly refuses to hold a charge. The problem is further complicated by the fact that most modern models do not have convenient access to the battery, so that it can simply be taken and replaced with a new one.

Fortunately, there are two excellent calculus that you can use to look at the health of your battery. The first is the maximum battery capacity (the full charge your battery can support). The second is the total number of charge cycles the battery has gone through.

Continuous use will always reduce the maximum capacity of the battery, but if it is in good condition, the reduction is only a few percent. over, lithium-ion batteries (found in almost every modern smartphone) degrade little by little after each charge cycle. Apple says batteries it designed for iPhones should retain about 80% capacity after 500 charge cycles.

Battery information is not available in iOS settings, so you will have to resort to a few different methods in order to get the data you need. Now we are just going to tell you about these methods.

Checking Battery Status on PC with CoconutBattery or iBackupBot

As we mentioned, there are tons of apps to check your battery health. So if you don’t want to use Battery Life Doctor then there are other options.

If you are a MacBook user, you can use an app called CoconutBattery, which can provide you not only with information about your computer’s battery, but also information about the battery status of your iPhone (or iPad, if the need arises). Simply connect your iPhone to your MacBook using a Lightning cable, open the CoconutBattery app on your MacBook, and then click on the iOS Device tab at the top of the program window.

By clicking on this tab, you will be able to see the amount of remaining charge, as well as the “Intended capacity”, which indicates the initial capacity of the battery of the devices. It is this data that will provide you with knowledge about the state of your iPhone battery. By the way, the readings of CoconutBattery and Life Doctor may differ slightly from each other, but they will still be close.

Windows users, in turn, can use an application called iBackupBot. Its price is a whopping 35, but it has a free trial period that lasts seven days. In one week, you can definitely check your battery status.

Again, connect your iPhone to your computer with a Lightning cable, open the iBackupBot app and give it a little time to build a profile of your device. Then select your iPhone from the list of devices, which will be located on the left side of the program window.

In the information panel for your device, click on the ” information” link. The top of the window will display the iPhone battery status information you are looking for. There you can see the line “Number of cycles”, which will indicate how many charges your device has gone through. You can also see the initial capacity of the battery and the maximum charge it can hold.

How to check laptop battery wear (battery test)

Good day.

I guess I won’t be mistaken if I say that every laptop user sooner or later thinks about the battery, or rather about its condition (degree of deterioration). In general, from experience, I can say that most begin to get interested and ask questions on this topic when the battery starts to run out too quickly (for example, the laptop runs for less than an hour).

To find out the wear and tear of a laptop battery, you can refer it to a service (where it can be assessed using special equipment), and use several simple methods (we will consider them in this article).

By the way, to find out the current state of the battery, just click on the power icon next to the clock.

Windows 8 battery status.

1. Checking the battery capacity through the command line

As the first method, I decided to consider the option of determining the battery capacity through the command line (i.E. Without using third-party programs (by the way, I checked it only in Windows 7 and Windows 8)).

Let’s consider all the steps in order.

1) Run the command line (in Windows 7 through the START menu, in Windows 8 you can use a combination of WinR buttons, then enter the cmd command and press Enter).

2) Enter the command powercfg energy and press Enter.

If you get a message (like mine below) that execution requires administrator privileges, then you need to run the command line under the administrator (more on this in the next step).

Ideally, a message about the system operation should appear, and then after 60 seconds. Generate a report.

3) How to run command line as administrator?

Simple enough. For example, in Windows 8, go to the window with applications, and then right-click on the desired program, select the launch item under administrator (in Windows 7, you can go to the START menu: also right-click on the command line and run as administrator).

4) Actually, we enter the powercfg energy command again and wait.

A report will be generated in about a minute. In my case, the system placed it at: “C: \ Windows \ System32 \ energy-report.Htm”.

Now we go to this folder where the report is, then copy it to the desktop and open it (in some cases, Windows blocks opening files from system folders, so I recommend copying this file to the desktop).

5) Next, in the open file, we find a line with information about the battery.

We are most interested in the last two lines.

Estimated battery capacity is the base, initial capacity set by the battery manufacturer. As the battery is used, its real capacity will decrease (the calculated one will always be equal to this value).

Last full charge. This indicator reflects the real capacity of the battery at the last moment of charging.

Now the question is how to find out the wear of a laptop battery knowing these two parameters ?

Simple enough. Let’s just estimate it as a percentage using the following formula: (41440-41440) / 41440 = 0 (i.E., the degree of deterioration of the battery in my example is 0%).

Second mini example. Let’s say our last full charge is 21440, then: (41440-21440) / 41440 = 0.48 = 50% (i.E., the degree of deterioration of the battery is approximately 50%).

2.Aida 64 / battery status detection

The second method is simpler (just press one button in the Aida 64 program), but requires the installation of this very program (besides, the full version is paid).

AIDA 64

One of the best utilities for determining the characteristics of a computer. You can find out almost everything about a PC (or laptop): what programs are installed, what is in startup, what hardware is in the computer, how long has the BIOS been updated, the temperature of the devices, etc.

There is also one useful tab in this utility. Power supply. Here in it you can find out the current state of the battery.

Pay attention first of all to indicators such as:

• Battery status;
• Capacity when fully charged (ideally should be equal to the nameplate capacity);
• Degree of wear (ideally 0%).

Actually, that’s all. If there is anything to add on the topic. I will be very grateful.

How to check the battery life of an iPhone or iPad using a computer?

There are many programs that can give us all the information we need about the battery. These are the famous iTools, iFunBox and many others. However, they are heaped up with various functions (sometimes very superfluous), and we only need battery statistics! Therefore, in this case, I advise you to use iBackupBot. The desired function is also not the main one in it, however, the minimum size of the program and a simple interface speaks in its favor.

You can download it from the developer’s website, there are versions for Windows and Mac OS. Please note that iTunes must be installed to use the program.

And then everything is simple:

1. Install and run the program.
2. We connect the phone to the computer. To connect correctly, you need to unlock your iPhone or iPad (if a password is set on the screen, then enter it) and in the dialog box that appears, click “Trust this computer”.
3. In the lower left corner we see the name of the device, click on it, then. Information.
4. In the window that opens, we immediately see all the information about the battery.

Since all the inscriptions are in English, I will give a small decryption of the data received:

• Cyclecount. The number of complete battery recharges.
• Designcapacity. The capacity that the new gadget originally had.
• Fullchargecapacity. Current capacity.
• Status: Success. General characteristics of the battery at the moment.

As you can see, my iPhone 5S’s capacity dropped by only 150 mAh in 2.5 years, and this is a very good result! In fact, it’s almost new. How did you manage to achieve such indicators? I just know how to properly charge my iPhones and iPads, try it too. Nothing complicated there.

How to find out the real (at the moment) battery capacity in iPhone and iPad

Greetings! There can be many reasons for the need to check the information on how much capacity is left in the battery of an iPhone or iPad. A similar need may arise out of simple curiosity: for example, it became interesting to me. Do I need to go to change the battery of my old iPhone 5S? Or is she not so bad yet?

Also, such a procedure is of great importance when buying a used device. After all, the seller can simply deceive. Say that his battery holds exactly as much as it should. And even show usage statistics (you can easily wind it up), but in fact, half of the capacity has already been lost there. How to find out the truth about the state of the battery. Is it bad or not? Nobody will wait a few hours to check! There are easier and faster ways. Let’s talk about them, let’s go!

Important note. We get all the data about the battery for free, without jailbreaking the device and other jailbreak. Cool? Not that word!

Now we are definitely starting. Forward!:)

Apps that will tell you everything about the battery status in an iPhone or iPad

Unfortunately, no one is safe from the situation when a computer is not at hand, and it is necessary to check the battery life of an iOS device here and now. Various applications from the App Store can help us with this. The best part is that you don’t need to jailbreak the device and install a jelbreak. Everything happens without it.

At the time of writing this article, a huge number of programs (about 15-20) have been in one way or another related to the battery on my iPhone. And only in one of them all data (charge cycles, actual capacity, etc.) were shown for free, immediately after installation and without any additional purchases.

Meet Battery Life. App Store download link. Install and run. Click in the upper left corner. The settings open, we are interested in the menu item. Raw Data. And we can clearly see all the information (also displayed in real time!).

A little point by point:

• Battery Charge. The indicator means how much the battery is currently charged and how much it can charge as much as possible.
• Capacity. Current \ standard battery capacity.
• Cycles. The number of recharge cycles.

The attentive reader will notice that the data for my device is slightly different for different checks (using the computer and the application). How so?!

First, this difference is really small. An error of 3-5%. And secondly, this is completely normal. Since different programs use different algorithms. And besides, the battery of my iPhone 5S has been working for quite a long time. Almost 2.5 years and it is quite difficult to analyze its use over such a period.

In any case, the check can be carried out by any option presented in the article, and the general picture of the battery life of your iPhone or iPad will be clear. To get the most plausible values ​​- use both methods, and choose the average of what you get.