iPhone stops charging what to do
Modern smartphones and other gadgets, despite all their functionality and stylish design, often have one very important drawback. they run out quickly enough and the user has to live literally from one outlet to another.
So, one day, after plugging your Lightning charging cable into the charging jack of your iPhone. you may notice that your iPhone has not started charging. Sometimes the charging indication may show up, but your phone still won’t charge. What to do if your iPhone stops charging normally? Let’s try to understand the reasons for this behavior of your gadget.
Cause “owner”. Here’s why iPhone 7 won’t charge
Often the problem is caused by the charger malfunctioning. Original cables are very fragile and can be damaged even by improper carrying in a bag. Therefore, you must be extremely careful when using them. If your iPhone 7 stops charging, you should first check another charger. If it charges, then the problem is specific to your adapter. The phone is in working condition, you just need to replace the charger.
No charging can be caused by damage to your phone’s logic circuitry. The main reason for this problem is the use of non-original chargers, which damage the chip and cause it to break. Quality adapters control the current and voltage in the connector. With fakes, this option becomes unavailable and problems may arise. To solve the problem you need to contact the service center and replace the damaged microchip.
Lack of charge may be caused by a software glitch. The phone has a special controller that allows you to charge the device. This controller is under the subordination of the software, if it fails, then the process of charging the battery becomes impossible.
Lack of charge can also be caused by phone component failure. It is not only the battery or the charging cable that is causing the problem, but also some indirect components that are interfering with the charging process. To fix the problem it is necessary to diagnose the wizard and replace the defective parts.
And I Sony xperia xa1 plus charges to 60, and I do not know what to do with it.
Good afternoon, Dmitry! Tell me if there is a way to solve the reverse problem: by default, charge only up to 80% and no higher. The case is this: I took the phone off the charger in the morning, walked around with it for a day (my phone is not heavily loaded and guaranteed to survive until evening even with 80 percent), put it on overnight to charge. In the morning the phone is charged to 80% again and ready to go, and the battery is not ruined by charging to 100%.
Hello. I don’t know how to achieve this on an iPhone. Optimized charging kind of “learns”, but, such as you described. has not met, to learn, although I do not know: not excluded in principle (I, for example, slow charge to 80% at night when I put it on charge, but in the morning it starts again and by 6 am brings about 100). I am not sure how to set it manually here and I am not sure it is possible.
But just in case one thing will reassure: for Li-Ion/Li-Pol batteries regular discharging to 30% or less is more harmful than regular charging to 100% (there are tests on batteryuniversity.com, for example), plus in terms of 100% there is not even so much of a bad charge to this level, but constantly being at this level (and, again, the harm is less than from discharges closer to 0).
Thank you for your reply! Whenever I see your site on google for any query, I know that I will find helpful and useful advice.)
I have an iPhone 11, I disabled this feature, thank you, but the phone keeps charging up to 80%, and drains very quickly. The battery wear and tear is 87%. It has 390 charge cycles. Can you tell me where else to look for the cause? Thank you.
Hello. There are no other parameters that affect it. And from experience, a battery with a wear and tear of 87 usually “knows” how to charge to 100. So I don’t know what to guess. The battery has not been changed? (non-original ones can behave strangely)
? USB power is not good enough
If you often charge your iPhone (or iPad, you never know) from USB ports on your computer, I’m sorry to disappoint you. most ports provide 5V and 0.5A of current. And the iPhone draws at least 1A, the iPad even more. It’s either look for a suitable plug or don’t make it up and charge the device from a regular socket.
iPhone not charging: possible causes
iPhone 6s is a high-performance phone with a display that produces a vivid, crisp picture with 15 million colors. It consumes a large amount of energy and needs a quality battery that will ensure long life of the device and can quickly recharge. The battery capacity of iPhone 6s is 1715 mAh. It allows you to work with Wi-Fi turned on and use 3G networks uninterruptedly for several hours. Despite the high quality of the battery, every owner of iPhone 6s encounters a problem when the smartphone stops charging. There are several reasons for this. Why can’t you charge your iPhone 6s??
One of the reasons why the iPhone does not charge is a software failure. To fix it you need to reboot your smartphone. Plug your iPhone in to charge it and restart it. A beep will sound during the reboot process to indicate that the battery is starting to charge. If this does not happen, then the reason is another malfunction. No charging is possible if the cable is damaged. It may be chafed at the connectors over time. To rule out this cause, you need to connect your iPhone 6s to the mains with a different charger. It is important to use original USB wires and adapters. The smartphone manufacturer guarantees quality and fast charging of the battery with the Apple charging wire. If your smartphone does not charge from the USB port of your computer or laptop, the cause could be a problem with the plug itself. Verify that you can charge it from the mains.
Sometimes there are cases when connecting the charging cable and seeing a message that the accessory is not supported. This indicates a defect in the lower charging cable. The cause of failure are ingress of moisture in the phone, falling from a height or other mechanical damage. Due to mechanical damage or voltage drop in the electrical network contact failure of the motherboard, responsible for charging your smartphone is possible. Such malfunction can be determined only in a specialized service center in Kiev by disassembling the phone and its full diagnosis.
Qualified master can understand and identify the exact cause of the lack of charging. He knows all the subtleties of the iPhone 6s and quickly identify the causes of failure. If your iPhone is no longer charging, take it to the service center and trust the professionals to repair. They will replace the battery iPhone 6s in Kiev modules and fix the problem within one day. You should not repair iPhone 6s by yourself in order not to cause significant damage.
Moisture damage to the iPhone
Your iPhone has been spilled with water or liquid: If the water or liquid is in the form of a couple of drops on the display it is not a big deal as long as they have not spilled any water on the dock connector, home button, voice speaker, or power or volume buttons. Thus it is necessary to wipe your phone simply with a dry napkin.
If your phone is bathed, or has been more heavily flooded, many people make the profound mistake of turning it off or charging it. DO NOT DO THIS. If your phone has taken a bath and you want it to live, never do self-treatment. It is necessary immediately to switch off the device and take to the experts as soon as possible to check how much damage from the liquid in the middle of the device.
Many machines keep working after getting water in it but after a few weeks they die, this is because the water itself destroys the tracks inside, connector terminals, etc etc. After a damp spill we strongly recommend to take your iPhone to specialists so that they can clean your device internally to avoid further damage to tracks, connectors and chips.
Can’t charge, doesn’t charge your iPhone. No charging. there may be several reasons. Perhaps due to a short circuit the dock connector failed, also due to moisture or liquids on your iPhone or in the dock connector. Our experts will replace your dock connector in the shortest time possible. The problem can also be caused by battery failure. Also due to moisture on the iPhone, the power controller fails.
The iPhone microphone does not work I can not hear: in iPhones it is often due to moisture on the dock connector, or the microphone itself is broken. Replacing the microphone or dock connector will solve the problem. Also, it may be caused by a broken audio codec. All these problems our specialists can solve in the shortest time.
The smartphone is being charged only when it is switched off
The cause of such a problem is often damage or thinning of the contacts inside the wire. Not enough power coming in to keep your device working properly. The problem may be in the phone itself: the cable is faulty or there are problems with the synchronization.
You can charge your smartphone through your computer, but it will take much longer. In some cases the indicator may “fool” you by showing that power is coming in, but actually the charge level will stay the same. Pay attention to running applications. It is likely that they consume energy faster than it comes in. As a last resort you will need to change the battery.
The service center “Technari” will help you to solve problems with battery, a non-working charging port or other problems due to which your iPhone does not charge. Free diagnostics, 6 months warranty on repairs and parts, payment only for the result. Find out iPhone repair prices.
Reasons why our iPhone stops charging and what we can do
It is claimed that a forced reboot fixes 80% of the software bugs we see from time to time, and they are a little weird. If the iPhone is not charging, the first thing I would do is force a restart, as this is the easiest and quickest way. For a forced restart, all we have to do is press the start button and the rest button until we see an apple. Be careful until we see an apple or just turn it off.
(Try) calibrate the battery
I wouldn’t get my hopes up too much, but it is another possibility. The battery (hardware) may not communicate well with the operating system (software), and the second one may not be right. We can not exclude that the system detects that the battery is charged and shows the correct percentage, so we could try to calibrate this, and I say “try”, because if you reach step 4, the download does not start, it does not help us at all. We would do this by doing the following steps:
- Usually the first step is to charge the battery to 100%, but since we can’t, we start with the next step.
- We use the iPhone until it shuts down completely by itself. If we don’t want to fiddle with it until it shuts down, we can leave it playing music or a movie with the screen down.
- When it is off, we leave it unplugged for 6-8h.
- In 6 to 8 hours we will be ready to boot it up. If it leaves us, the load should be another 6-8 hours without unplugging it.
- After this time, we can use the device.
As always when we encounter a software problem, the last step. Restore and clean install. If we still can’t charge our iPhone, we may have a hardware problem.
Check / Change the cable
Let’s face it: Apple pays so much attention to design, sometimes so much that it forgets to make durable products. iPhone cables tend to break near the Lightning or 30-pin connector, although it’s also true that this depends on the user. I charged one a long time ago (I think it was my fault) and it never happened to me again, but iPhone cables flake off, and if use is very extreme, the problem can reach the cable itself, so it can stop working. If we have a cable in better condition, we can check to see if that cable is not booting or not.
Plug it into a different outlet
It may cause more problems if the socket is the USB port of the computer. Informatics. Is a computer science, and it can fail at any time, so the USB port can stop delivering the necessary power any time. This can be solved by trying a different USB port, which could even be from the same computer. If this does not solve the problem or we use an outlet, we can try to connect it to another one.
It depends on the environment in which we leave the iPhone, the Lightning port can collect dirt, preventing the contact required for charging. It is even possible that this dirt comes from our own sweat, which, if it hardens, prevents contact more than dust. Another step we can take. is to clean the Lightning port or the 30-pin port, as well as those at the other end of the cable: USB, the USB socket and even the socket.
I won’t deny that the title of this paragraph involves some banter, but it is meant to explain a case I know and should avoid. This is an iPad that wasn’t charging, they took it to the Apple Store, checked to see if it worked with diagnostic software, and they said there was no problem. Apple’s advisor said to do a clean restore and use as normal. When you got home, restored it and spent some time, the problem is back, so it needs to be returned to the Apple Store. The moral or advice is this: do not go directly to check only the hardware, If not, you also go through to the end of the software section first, which should restore the device, not restore the backup. If you do that, you can already tell the Apple consultant that we’re all done, and he’ll tell us that he’ll keep it for repair and give us a budget.
The iPhone is damaged?
Clearly, if we went through the section of a possible software problem, we tried different cables, different outlets, we cleared the ports, and it doesn’t work, we have a problem with the hardware. So the best thing to do would be to take it to the Apple Store. There’s no need for them to repair it there, but we can go and connect it to their diagnostic software and let us know if it has a problem and what it is. If they tell us that the battery is bad and it costs more to replace than we want/can pay, we already know what’s going on with our iPhone and can repair one of the items that will be explained later.
What to do if iPhone stops charging
Although iPhones have been recognized as some of the most reliable phones, no one is still safe from sudden breakdowns. One of the most common malfunctions is a problem with the charging. At one “beautiful” moment iPhone simply stops responding in any way to connection to a power source. What to do in this case? Let’s look at all the potential causes of this behavior.
First of all, it is necessary to determine when exactly the breakdown occurred: if it was caused by physical or mechanical impact, or moisture got inside the device, guessing is not worth it. the problem will most likely not be solved by your own efforts. We recommend to contact the corresponding service center for further guidance as soon as possible. But if this is not your case, we can suggest the following options:
Changing the Lightning cable and charger.
If you use unofficial accessories when charging your iPhone, this is likely where the problem lies. As you know, cables and chargers from third-party manufacturers that are not MFi-certified are not highly reliable and can fail at any time. In order to rule out such a scenario, a different power supply must be connected to the device.
Clean the Lightning connector on the iPhone itself.
Even if your phone is always in its case, over time, dust and debris may have collected in the Lightning connector. Sometimes even the slightest tiny speck can prevent you from charging your phone. The solution is quite simple. you need to use a toothpick and gently clean the connector without touching the contacts.
Perform a forced reboot.
Sometimes such a malfunction is observed when the operating system does not work correctly. To rule out a software error, you should perform a forced reboot. This can be done very simply:
- For iPhone 6s and earlier models. press the power and home buttons for 10 seconds until the Apple logo appears.
- For iPhone 7 and newer. by pressing the power and volume down buttons for 10 seconds, until the Apple logo appears.
Unfortunately if the above recommendations did not help, then most likely only the service center can determine the true cause of the failure. Often the problem is with the power controller, sometimes it is with the battery or with a faulty Lightning connector. However, each case is unique. respectively, to determine the main source of failure can only be a specialist, after conducting a thorough diagnosis.