How to connect wireless earbuds to your iPhone

Table of Contents

Why iPhone headphones don’t work?

Make sure the Bluetooth accessory and the iOS or iPadOS device are close to each other. Turn off and then turn on the Bluetooth accessory. Make sure the Bluetooth accessory is turned on and fully charged or connected to a power source. If the accessory uses batteries, check to see if they need to be replaced.

How to connect Philips headphones to iPhone?

Pairing your device with a Bluetooth accessory

  • On your device, go to the Bluetooth Settings menu and turn on Bluetooth.
  • Put the accessory in discoverable mode and wait for it to appear on the device’s screen.
  • To pair, tap the name of the accessory when it appears on the screen.

How to connect Xiaomi headphones to iPhone?

To connect wireless headphones, you need to go to “Settings”. “Bluetooth” and turn on Bluetooth. Stay on this screen, put the headphones into discoverable mode and click on the accessory name when it appears on the screen. If you need a PIN, refer to the documentation supplied with the headphones.

What to do if headphones don’t work on iPhone 7?

  • check the lightning connector for clogging or foreign objects;
  • check the condition of the headset (whether the cable is broken or whether the headphones themselves are damaged);
  • if the device has a cover, remove it and try to connect the headphones again;

How to sync headphones with iPhone?

Using iPhone to set up Airpods

  • Go to the Home screen.
  • Open the case that contains the Airpods and place it next to the iPhone.
  • The iPhone displays a setup animation.
  • Click “Connect”.

Which wireless headphones are suitable for iPhone

Starting with the iPhone 7 version, which was released in 2016, Apple has completely ditched the standard 3.5mm headphone jack. Now you can connect a headset to the device only through the charging connector.

This caused some difficulties, primarily related to the simultaneous charging of the battery and listening to music with headphones. You can solve this problem using a special adapter that connects to the phone and allows you to use multiple connections at once.

Another way out of this situation was the release of wireless headphones. The headset is connected via a wireless connection, Bluetooth, so the connector remains free for the charger.

Wireless headphones are undoubtedly useful. So, you can forget about tangled wires. It is enough to take them out of a special case and create a connection with a smartphone. If the headset is no longer in use, the pair must be disconnected and the headphones replaced.

This device cannot operate continuously for a long time and requires regular recharging. It is charged through the case that comes with the kit. The amount of time the headset can spend without charging depends on the model itself.

Apple makes its own Airpods. They fit better with all iPhones. However, some users do not want to use this headset. This may be due to some peculiarities.

First of all, it is worth noting that Apple headphones come in only one type, in-ear or tablets. They can be uncomfortable, since everyone’s ears are different, and the shape of the headset is the same. Manufacturers drew attention to this shortcoming and in 2019 announced the release of vacuum headphones.

Here lies the second drawback. cost. Original devices from Apple are quite expensive. In addition, the wireless kit does not come with a smartphone. For this reason, users often prefer other manufacturers.

Apple provides the ability to connect not only original headphones. Any headset that uses Bluetooth for pairing can be connected. Thanks to this, you can purchase a cheaper kit, with which you will not have any problems during operation.

Connecting Bluetooth headphones to iPhone and iPad

First you need to turn on our headphones and put them in the mode of connecting to a new device. So that the headphones are searchable. Turn on the power, and see if the blue indicator blinks. It should just blink. If not, then you need to press a separate button (with a Bluetooth icon), or press and hold the headset power button.

Important: the indicator should flash blue.

connect, wireless, earbuds, your, iphone

  • We take our iPhone or iPad and go to settings.
  • Go to the “Bluetooth” section.
  • Turn on Bluetooth and select our Bluetooth headphones in the list of detected devices.
  • We see the status “Connected” near the headphones, and an icon near the battery level.

All connected. Screenshot for clarity.

If you click on the “i” icon in front of the headphones, you can disconnect from them, or even delete “Forget this device”.

But this very “Batteries” widget, which appears automatically after connecting the headphones, and displays their battery level.

In the future, it is enough to turn on the power of the headphones and Bluetooth on your iOS device, and everything will be connected automatically.

How to connect wireless Bluetooth headphones to iPhone or iPad

Bluetooth headphones are cool and versatile. And if you have visited this page, then you most likely already have wireless headphones, and you appreciated how easy it is to use them. I somehow put off buying Bluetooth headphones, but still decided to get them to listen to music from all over the iPhone. And now I also use them with iPad, laptop, and even TV

I don’t know how relevant and useful this article will be, but I decided to tell you in detail and show how to connect Bluetooth headphones to an iPhone or iPad. Simply put, to iOS devices. Everything is very simple and clear there. But in some cases, problems can arise. I hope that my instructions will help you quickly connect your headphones to your phone or tablet and enjoy your music. By the way, if you have headphones with a microphone, then you can also answer calls from your iPhone through them. It is very convenient.

I have JBL E45BT headphones and they have buttons with which you can increase or decrease the volume, switch tracks (by pressing and holding the volume buttons), as well as answer and end calls. And another nice little thing that awaited me after connecting the headphones to the iPhone was the display of the headphone charge level in the widgets on the iPhone. I don’t know if this function works with all headphones, but the thing is handy.

So, we have an iPhone or iPad and Bluetooth headphones, and we need to pair them. I have this JBL E45BT, iPhone 6 and iPad mini. You may have other devices, the connection procedure will practically not differ even on iPhone 8

How to Connect Bluetooth Headphones to iPhone Phone

Usually, there are no problems when connecting wireless headphones to a smartphone. First you need to make sure in what way this happens. Here we are talking about which headset you need to connect.

The connection can be made in two ways, automatically and via Bluetooth settings. In the second case, it is enough to turn on the headset and follow the instructions, which will be described below.

Sound adjustment

The user can customize the sound to be displayed on the headphones in several ways. First of all, it is worth noting the standard parameters. To display them, go to the settings, then “Music” and “Equalizer”. There are several items in the list that will help improve the sound.

Select “Off” to cancel any setting. It is located in the same Equalizer menu. Using this section, the user can check different parameters and select the desired one. It is worth noting that this check should be carried out with headphones.

Apple headphones do not sound bad at low frequencies, so users often choose ” Bass”.

Some applications provide the ability to adjust the sound setting. They have a built-in equalizer that helps you change the sound parameters yourself. So, the user can remove noise, cut high frequencies and add bass. However, this setting will apply exclusively to the selected program.


First, the user needs to turn on Bluetooth. This can be done through the settings or the special menu “Control Center”. To open it, you should slide your finger across the screen from bottom to top.

In the case of Apple’s Airpods, you only need to open the case in which the headphones are stored. After that, automatic connection will start. The headset will be automatically connected to the smartphone, the user does not need to perform any other actions.

If the wireless device is not from Apple, it must be connected through the settings. For this you need:

  • Turn on the headphones and place them at a short distance from the smartphone.
  • Open “Settings” and go to the “Bluetooth” section.
  • Make sure the function is enabled. Then, from the list below, select the desired pair.
  • If the headset is connected for the first time, you should pay attention to the “Other devices” block.

After the pair is created, the user can exit the settings and play music / video. You can make sure that the device is connected by paying attention to the corresponding icon in the upper right corner of the screen.

Step-by-step instructions for connecting wireless headphones for Android

After the “blue tooth” has turned on on the phone, activate the headphones. To do this, press the power button, and then make a long press on the Bluetooth activation button. The indicator, if any, should blink. On the phone, in the appropriate section, select an option. Search for devices. After some time, the smartphone will offer you to choose one of the found gadgets. Most often, you can recognize your headphones by the name. If you purchased a Chinese device, then the name may be long and confusing. Just unplug your device and see what disappears from the screen.

Read more:  How to Bypass Activation Lock on iPhone 6

Once you’ve managed to find your headphones, click directly on them. you will be prompted to connect them to your smartphone. Agree. The selected device should appear in the upper list of established connections. It will say “Connected” next to it. In most cases, the same line will reflect the state of charge of the headphones.

If you have headphones in a case, then keep in mind: it is better to open the lid after you turn on the power on the device, after waiting for the ready indicator to appear.

Connecting to headphones from Apple gadgets isn’t much different. Turn them on first, then Bluetooth in the phone settings. After that, select your device in the list of found equipment and allow the connection.

Most often, Airpods are used with the iPhone, which allow you to use Siri remotely. In this case, first make sure your smartphone software is new enough. For example, the Pro version of the gadget will only work with iOS above version 13.2, the 2nd generation will connect exclusively with a device on iOS 12.2 and above.

Further, the sequence of actions is similar. Turn on Bluetooth on your phone, place the headphone case next to your smartphone and open it. An animation will appear on the screen, click “Connect”. If you have a Pro version, an instruction will appear next. With the 1st and 2nd generation, everything is easier. If Siri is not configured, then after connecting the phone will prompt you to do it.

Why the connection might not be established

For example, you do everything according to the rules, the device appears in the list of available for connection via Bluetooth, but the connection does not occur. Or your gadget doesn’t appear on this list at all. There may be several reasons for this:

If you turn on the headphones, but they do not appear in the list, try pressing the pairing button on them again. If that doesn’t help. turn off the gadget and turn it on again. Then try disabling Bluetooth on your phone and enabling it again by manually searching for nearby devices. Also try to place the earbuds as close to the phone as possible, especially for the first connection.

If the headphones are on the list, but pairing does not work, check if they are already connected to another device nearby. If the connection has already been established with another smartphone, tablet, computer or TV, the second connection will fail. You need to find this device and turn off Bluetooth on it, then the connection will be cut off and you can connect to another gadget. If you do not know what kind of device it is, just turn off the headphones, place them directly next to the phone with an active network, and only then press the power button. In this case, the gadget will connect with the device that is closer.

Interference from other wireless devices may cause failures. Take them away and try again.

If the device takes too long to connect, but there is no result, click on its name in the list and select “Unpair” or “Disconnect”. Then restart your smartphone and try again.

Are Airpods compatible with an Android smartphone?

When connected to an Android smartphone, Airpods will be no different from regular wireless earbuds. If you have Bluetooth in your phone, feel free to connect such headphones. But for more convenience, different applications may be needed. For example, AirBatter or Asistant Trigger will help you determine if you have inserted headphones into your ear to automatically start broadcasting audio. Also, the program can determine the charge of the cover and the “ears” themselves.

The following functions will be unavailable for the user:

  • Siri;
  • interruption of audio recording after the earphone is removed from the ear;
  • it is impossible to control the charge and control the power consumption of the smartphone.

It’s easy to connect Airpods to your Android phone. Also turn on Bluetooth on your phone, then open the charging case cover. Press the button on its back and wait for the charge indicator to flash white. The headphones will appear in the list of available devices, connect to them.

How to connect wireless headphones to your phone

What to do if only one earphone is connected

One Airpods not working.

Try resetting your Airpods. To do this, in Settings, find the Bluetooth parameter, in the list of available devices, click on the letter i next to the name of the headphones and select “Forget this device”. After that, first put the headphones in the closed case for a minute. Then first open the case, wait for the white indicator to appear, place the device with the lid open next to the smartphone and press the connect button on the iPhone screen.

The problem may be with the old firmware. Try updating to the latest version. You can check which one you have in Settings. To do this, you need to sequentially select: Basic. About this device. Headphone name.

Check the volume balance on the device in the audio settings. Perhaps the slider has moved to the left or right, and the sound simply does not go to one of the headphones.

If devices are connected but there is no sound, clean the headphones. For this, it is better to use microfiber and cotton swabs.

Try connecting the headphones to another iPhone and if the problem persists, contact a service center. The battery may be out of order in the headphones, or the internal wire may be damaged.

Only one headphone of any brand is connected. 1. Try to re-establish the connection by first removing the device.

Try connecting them to another gadget to understand which device is the problem.

If the problem is with the phone, update the firmware or do a factory reset.

How to connect the earpiece to iPhone via Bluetooth

It is believed that wireless headsets connect to smartphones made by Apple with great difficulty.

How to Pair Airpods with iPhone 7. Bluetooth

Difficulties in connecting to the iPhone are associated primarily with the presence of “unfriendly” Bluetooth. With its help, it is completely impossible to transfer information to smartphones from other companies. with rare exceptions.

The headset must have a full charge of its battery. you need to put it on recharge in advance. The charge level can be judged by the color of the indicator on the case of the Bluetooth module (if available), or you can charge it for the time specified in the instructions for the device.

Before use, you should pair your mobile device with the transmitter. To do this, you need to turn on the latter, and connect it via Bluetooth in the iPhone settings.

There is a nuance of using such hidden devices in conjunction with Apple products.

How To Connect Wireless Headphones to IPhone (2019)

  • button located on the transmitter body;
  • answer buttons on the phone itself.

To avoid this, activate the connected headset as the audio source. This is done in the corresponding settings menu of the famous smartphone.

If you answer with the button of the transmitter, then the conversation with the interlocutor can be conducted using earpieces.

Problems connecting wireless headphones to iPhone

In some cases, the iPhone may refuse to recognize the headphones. In such a situation, we check the availability of the headset for detection by other devices. If the Bluetooth indicator is constantly on, and not flickering, to activate it, press a separate button or use the power key hold.

In different models of headphones, this action has its own characteristics. Disabling Bluetooth and reactivating it can help. There is a chance that after this the accessory will appear in the list of devices that are available for connection.

Bluetooth earphone activation

After completing the described steps, the phone will assign the status “Connected” to the headphones. A new designation will appear next to the battery level indicator, which indicates that the headphones are connected and ready to work.

Thanks to the function marked “i”, we can temporarily disconnect the headset or completely delete all connection information. For the latter case, the item “Forget this device” is provided.

The indicator that notifies the user about the headset charge level is called “Batteries”. When you reconnect the headphones to the phone, the device recognizes almost instantly and without user intervention.

Which headphones are suitable for iPhone and how to check compatibility

Before connecting wireless headphones to iPhone 6, 7, 8, or 10, check the compatibility of the device. The most popular option is Airpods. These Bluetooth headphones can be connected to iOS devices that run on iOS 10 or higher for the 1st generation device and 12.2 and higher for the 2nd generation. In addition, they are compatible with Android devices, Windows Phone and other Bluetooth devices, as well as Mac computers. The advantages of such headphones are a long battery life, convenient control and delivery in a convenient case. Cons. high price and periodic software crashes.

Let’s highlight a number of wireless headphones that can be connected to the iPhone:

  • Meizu EP51 is a Chinese, but high-quality device, which is sold in a small purse, complete with pads and a cable for recharging. Pros. excellent sound, the ability to charge from a laptop, the presence of a control unit and a small price (about 2000 r). Of the minuses. tight buttons and charging for two hours.
  • Sennheiser IE8i. To connect wireless headphones to iPhone, simply remove them from the box, turn on and set up the connection on the phone. The device is of high German quality. Pros. the ability to be fixed to clothes, perfect sound, many settings and compatibility with the iPhone. Of the minuses. the hardening of materials at a low temperature and a high price, which is over 12,000 r.
  • Beyerdynamic Byron BTA. Another reliable wireless earbuds with high quality sound that you can connect to your iPhone. The battery life of the headset is about 8 hours under constant load. Charging time is about 1.5 hours. Pros. several additional attachments, the presence of a microphone, low weight (12 g). Cons. the price is over 12,000 rubles, not very good sound insulation, periodic interruptions in communication when removing the smartphone.
  • Marshall Mode EQ is a reliable headset with excellent bass and high-quality fit in the ear. When developing the device, special attention is paid to the quality of the wire and the reliability of the case. Pros. the presence of a lock on clothes, a small price (about 3000 r), high-quality sound, the presence of an equalizer and a long service life. Of the minuses. inconvenience with prolonged wear, difficulties with the use of the equalizer.
  • Sven AP-B770MV are wireless headphones with a microphone and great sound that you can easily connect to your iPhone. Thanks to its wide functionality, the device can be used to listen to music and talk. Pros. high sound quality, secure fit on the head, stability of signal transmission over a distance. Of the minuses, it is worth highlighting the small control buttons, but otherwise the system works stably.
Read more:  Does Xiaomi redmi 8 support wireless charging

In addition, iPhones are compatible with other devices. Sony MDR-ZX330BT, Ostry KC06A, Philips SHE3590, Samsung Gear Circle SM-R130, etc. The list of compatible models is wide enough to find the right one.

Before connecting Bluetooth headphones, you need to check their compatibility. To do this, turn on Bluetooth on the iPhone and activate the device itself, then try to connect the devices with each other. How to do it correctly, we will consider below.

How to connect a Plantronics micro-earphone with a headset to an iPhone

Plantronics is one of the leading manufacturers of high-tech phone accessories. from stationary devices to modern smartphones. This company also produces wireless headsets. including for earphones.

Naturally, for a more specific description of connecting the transmitter to the iPhone, there is no better sample than the products from Plantrinics:

  • The compact transmitter should be switched on first. This can be done using a button on the case. A colored indicator will let you know when the device is turned on. It is understood that the Bluetooth module must be fully charged.
  • Then the headset must be made active to receive. To do this, you need to hold the power button for a few seconds. The indicator will indicate that the device is ready for synchronization. it will blink.
  • Next, we synchronize with the phone

If the iPhone has already been paired with this transmitter, it will connect automatically. To do this, you will need to enable the wireless data transfer function in the corresponding smartphone settings menu.

If both gadgets are synchronized for the first time, then everything becomes somewhat more complicated. after activating Bluetooth on the phone, you need to find the Bluetooth module among the devices available for connection. The search starts automatically after activating Bluetooth, after which you will need to select the name of the device. For Plantronics products, the transmitter name begins with “PLT_”. Next is the name of the specific model used.

After the desired transmitter is selected, a window for entering the password will appear on the screen of the Apple smartphone. For most models, the default password is 0000 (four zeros). If the password is different from the standard one, then this is indicated in the instructions.

After the transmitter “creates a pair” with the iPhone (namely, the message “Connected” opposite the headset name will notify about this), the process is considered complete. In the future. when you turn on the “blue-tooth” wireless communication. the process of synchronization of the two devices will occur automatically.

Thus, the myth about the bad attitude of smartphones “with bulls-eye” to wireless transmitters can be easily refuted. If you follow the instructions, then it will be easier to connect earphones.

Wireless headphones capabilities

Some modern models of wireless headphones allow:

  • answer calls;
  • end the conversation;
  • choose the optimal volume level.

In addition, while listening to music, you can often change songs using headphones by holding the volume keys. For beginners, it may also be a pleasant surprise that proprietary iPhone widgets show how much energy is left in the headphones.

How to connect a Bluetooth headset to an iPhone The owner of any iPhone (2G, 3G, 3Gs, 4, 4S, 5) has the ability to connect a wireless headset to his iPhone, any model is equipped with a Bluetooth interface, through which the headset connects to the phone “over the air” There are a lot of models of wireless headsets for the iPhone, there are also music headsets with support for the A2DP protocol, but all headsets are connected to the iPhone in about the same way.

We used a Plantronics Voyager PRO headset in conjunction with an iPhone 4S to prepare this manual. The first part of the tutorial will help you connect your headset to your iPhone. Well, then already on operation.


Now you need to launch Settings in iPhone, select Bluetooth and turn it on. As soon as you turn on Bluetooth, devices are automatically detected, in other words, the phone should find your headset. Apple iPhone found the headset, now click on it to connect. If the default headset password is 0000, the iPhone will automatically reconnect the headset without prompting for a password. If the default headset password is different, the phone will ask you to enter it. For the standard password for your headset, see the instructions.

In addition, the headset icon should appear in the Status Bar located at the top of the iPhone display, it is also a charge indicator of the wireless headset, if you look closely, you can see this very strip of charge.

How to use a wireless headset for iPhone After the iPhone has detected the headset and connected it via Bluetooth, you can use the “ear”. To check the functionality, ask to be called and during an incoming call press the answer button on the headset. If the voice of the incoming subscriber is heard in the headset speaker, and the caller hears you using the microphone built into the headset, then everything is in order. The answer button on the headset is also used to end the conversation, press it at the end of the conversation and the phone hangs up. This is the easiest and most convenient way to answer a call, the iPhone can be in your at this time and you don’t even have to take it out.

But there is another way to work with the headset, it can be useful for those who have a broken answer button on the headset or for those who always look at the iPhone display before answering.

The second method of answering and talking with the help of a connected headset requires a little more steps, but if you read the instructions to the end, you will understand how to reduce these steps to a minimum.

After completing these steps, the sound is redirected from the phone to the headset, and we speak through our “wireless ear”.

The second way of answering can be shortened by applying some settings in the iPhone: Settings. General. Accessibility. Incoming calls. select Headset. After applying such a setting, the iPhone will automatically redirect the sound to the headset at the moment of answering from the phone (item 1), and there is no need for items 2 and 3 at all.

If a Bluetooth headset using this setting is disconnected from the iPhone, then at the moment of answering an incoming call, the phone will work normally, which is very convenient.

Thanks to Dina for preparing the material! We hope now anyone can connect a wireless headset to their iPhone.

Wireless earphone instruction for iPhone

We discussed the theory, now, in practice, we will describe in stages how to connect a wireless earphone to an iPhone. Curiously, the wireless headset connection algorithm is common to almost all Apple devices and iPhone versions.

  • turn on the headphones;
  • we activate on them the ability to connect to a previously unknown device (usually by pressing a button and holding it for more than two seconds);
  • when the headphones become open for searching, turn on the power.
  • expect the blue indicator to flicker.

If the indicator refuses to blink, we use a special key on which you can see the Bluetooth designation. In some cases, you have to use the headphone power button. In this case, you will need to hold down the specified button.

  • Important: it is necessary to achieve exactly blue blinking from the indicator.

Features of connecting a wireless earpiece to a smartphone

The headset for microreceivers communicates with this mobile device via Bluetooth, so it does not need unmasking wires. over, the connection is possible for any phone equipped with a wireless “blue-tooth” communication function.

But in some models it may be less.

The headset itself is hung around the neck during operation. by a loop with a hidden antenna. Naturally, it will need electricity to work. the battery is a built-in battery.

It will be possible to communicate with the assistant through the built-in microphone.

Third Party Bluetooth Headphones

Usually, the solution to the problem voiced in the title does not cause difficulties, but before proceeding with its consideration, we note the following:

The article will show the algorithm for connecting wireless headphones, which is applicable to products of any manufacturer except Apple. We will not touch on the topic of creating a pair of iPhone and Airpods. these devices are paired automatically and without any problems and nuances, and the process itself is accompanied by step-by-step prompts on the screen.

Connecting Wireless Headphones to iPhone

Users of modern mobile devices are increasingly switching to wireless accessories. The most commonly used and simply necessary ones are headphones, and below we will tell you how to connect them to an iPhone.

Solving Potential Problems

In some cases, the iPhone may not see Bluetooth headphones that are turned on and in discoverable mode, or it may see them but will not connect. To solve these problems, follow the steps below one at a time, and after each step, try to re-pair the devices.

  • Restart your iPhone, turn your wireless accessory on and off. On the first, reactivate Bluetooth, and the second put it into discoverable mode. How to restart iPhone
  • Make sure the earbuds are charged and the mobile device is not in power saving mode. How to turn off Power Saving Mode on iPhone
  • If the accessory has previously connected to the iPhone and there were no problems with their connection, break the pair using the recommendations from the article of the same name, and then follow the steps necessary to create it.
  • If the headphones are currently paired with another mobile device (the connection may or may not be active), disconnect this connection and try to connect them to the iPhone, after switching to the discovery mode.
  • If the accessory uses a proprietary app, check if it is allowed access to Bluetooth. To do this, go to the path “Settings”. “Privacy”. “Buetooth” and make sure that this parameter is active for the desired program.

If the above recommendations did not help to get rid of the problem, and it itself, among other things, is accompanied by one of the symptoms indicated below, contact Support Apple at this link.

  • Bluetooth cannot be activated on iPhone or this option is inactive;
  • Not only the headphones you are using, but also other wireless accessories do not connect to the iPhone.

In general, problems with connecting Bluetooth headphones to the iPhone are quite rare, and if we do not take into account special cases (for example, physical damage to the device or communication module), they are all easily solvable.

Airpods 1st, 2nd generation and Airpods Pro

Connecting Apple branded headphones to the iPhone is much easier than with third-party manufacturers. The process itself is automatic, requires literally a couple of taps on the screen and takes no more than a minute. However, setting up a wireless accessory is still worth paying attention to, since its correct implementation will allow you to fully use the declared functionality, whether it be playback control, selection of noise reduction mode or synchronization with other devices. details about all the nuances of this procedure can be found in the article presented at the link below.

Read more:  Differences between iPhone 7 and 8


In order to pair an iPhone and Bluetooth headphones, follow the following algorithm:

  • Make sure Bluetooth is turned on on iPhone. If necessary, activate it from the “Control Center” (swipe up from the bottom of the screen to call) or through “Settings”.
  • Put your wireless accessory in discoverable mode. If you do not know how to do this, refer to the instructions included in the kit or find it on the Internet by entering a query using one of the following templates in the search box:
  • headphone manufacturer and model user manual
  • headphone make and model enable detection mode
  • Open “Settings” iPhone and go to them to the section “Bluetooth”.

    Make sure that the function is turned on again and wait until the name of the headphones that you connect to the mobile device appears in the “Other devices” section.

    Note: If you do not know the name of the accessory being used, look for this information on its case, packaging or in the instructions.

    Note: Some wireless accessories require a PIN or passkey to pair them with mobile devices. Usually the required combination is indicated on the packaging or in the user manual. It also happens that she appears right on the screen.

    As soon as you see that “Connected” appears in front of the Bluetooth headphones, and they themselves have moved to the “My devices” list, the procedure for connecting them to the iPhone can be considered complete. At the same time, the headphone icon and an indicator of their battery charge level will appear in the status bar. Now you can use the accessory to listen to audio and watch video in any of the applications available in the iOS environment where this feature is implemented.

    After pairing between the mobile device and the headphones, their subsequent pairings will be carried out automatically (provided that the first has Bluetooth turned on, and the second has just been turned on). In the same cases, if more than one wireless gadget is connected to the iPhone at the same time, an additional action may be required. clicking on the name in the “My devices” list.

    How to turn on wired headphones on iPhone

    The headset from the iPhone can be easily used on the iPad or iPod touch. If these are wired headphones with a 3.5 mm jack, you just need to insert it all the way into the corresponding jack on the phone. This should be done as carefully as possible, without connecting the accessory abruptly, moving it along the sides. If everything is done correctly, an icon will appear on the display, symbolizing that all contacts in the socket are closed and the headphones are successfully connected.

    On iPhone 7 plus, the jet connector is at the bottom

    Note! You can perform all these actions with other accessories with a 3.5 mm audio jet, but remember that it makes no sense to connect headphones with an impedance of more than 32 ohms. The power of the phone and battery is not enough to produce the same high-quality sound that they are capable of when connected to a computer or laptop.

    What to do if the iPhone 7 does not see the headphones and why

    First of all, it is worthwhile to understand that headphones for the iPhone, as well as for some other devices, are divided into classic wired and new wireless generation accessories. The latter were called Airpods, they are gaining popularity, gradually displacing confusing wired devices from the market.

    If the iPhone 7 headphones are not working, then it may be due to a hardware failure.

    For your information! Since their release, Apple has received many complaints about design and connection issues. If the phone does not see new wireless headphones, then most likely this happened due to errors in synchronization.

    The reason for the lack of sound and the impossibility of identifying the device may be:

    • operating system updates that were incorrectly installed due to failures;
    • dirt, dust or sand has got into the headset jack, as a result of which the phone does not receive contact for detecting and switching to the listening mode from the headphones;
    • dirt or, more often than not, moisture has got into the phone case. It could oxidize the input pins for the headset, which also prevents the signal from passing to the processor;
    • the smartphone or headphones were dropped, as a result of which the loop responsible for transmitting signals was damaged.

    iPhone 7 Plus also suffers from headphone problems

    Important! It is a careless attitude to equipment and accessories that causes most of the breakdowns that may not be related to headphones. Do not expose the phone to direct sunlight, leave it in damp rooms, or drop it on a hard surface.

    The first thing to do is restart your iPhone or iPad. If that doesn’t work, you can reset all custom settings and updates. Perhaps the problem lies in the software part in which the failure occurred. After restoring the phone, it is advisable to return the backup copies of the updates that were prepared before the factory reset.

    It often happens that some program simply does not allow the phone to turn on the vibration option. You need to remember which updates or software products were recently installed on the device, and uninstall them manually, and then check for the connection and sound.

    If water gets into the phone, the contacts may oxidize and the operation of many modules will be impaired. Needed as soon as possible:

    • Unscrew the outer screws of the iPhone case and detach the back cover.
    • Using a suction cup or a sharpened credit card, carefully remove the display and take out its ribbon.
    • Dry the device with a hairdryer and remove oxidation with alcohol, if they appear.
    • Assemble the phone in the same sequence.

    If after all this music does not appear and the headphones are not detected, the problem is in the connector. It is recommended to gently clean it with a needle and cotton swab, which will remove dirt and dust lumps that have accumulated there due to wearing in a trouser

    The headset may not turn on due to a defective adapter

    Why iPhone doesn’t see headphones. what to do

    Many people love to listen to music, it inspires and gives strength. It is better to do this with headphones so as not to disturb others, especially since their tastes may not coincide with the musical preferences of the music lover. Sometimes with accessories of this kind, or rather with their connection, problems arise. Owners of expensive technology are not immune from this, as well as lovers of cheap smartphones. It happens that the iPad, iPod or iPhone does not see the headphones. This material will tell you in as much detail as possible what to do if the headphones on the iPhone 7 do not work, how to set up the connection and what to do if one headphone suddenly stops functioning.

    One earpiece from the iPhone stopped working: what to do

    Unfortunately, the quality of the Apple headphones is poor. Airpods have certainly propelled the company forward in this regard. But after constant use for a couple of months, they also often fail. The most amazing thing is that most often it is one earpiece that breaks, and it is the right one, which contains the microphone and the volume or video recording switch.

    How to connect Wireless Earbuds to an iPhone

    It would seem that you have to buy a new accessory or use it in one ear, but there is one catch. All sounds in the phone are reproduced in stereo mode: the song is decomposed into left and right channels. One can hear a voice, and another, for example, the sounds of individual musical instruments. This is why you may not always enjoy the sound quality when listening in one ear.

    Airpods may not be supported on older iPhones

    The solution to the problem is peculiar, since it does not make the second earpiece work. The point is to set the sound to play only in mono mode. It uses only one canal and all components pass through it to one ear. To switch to mono, you need to go to the phone settings, find “Universal Access” and switch the desired parameter.

    How to set up headphones on iPhone

    You usually only need to set up wireless headphones. If they are used for the first time, then you need to make sure that the latest version of the software is installed on the smartphone. After that, you should perform the following actions:

    • Go to Home Screen.
    • Open the case with the headphones and place them next to the phone.
    • Wait for the setting animation to appear on the display.
    • Click “Connect“.
    • In the case of the Pro version of the headset, carefully study all the instructions.
    • Click “Finish”.

    The accessory may not connect due to moisture getting into the phone case

    Important! If you are signed in to iCloud, the headphones will automatically set up to work with any supported Apple ID-connected devices.

    How to connect the speaker to the phone via Bluetooth

    For users who like to listen to music through speakers wirelessly, the method of connecting a Bluetooth speaker to an iPhone will be relevant. This can be done as follows:

    • Put a speaker or a pair of them in close proximity to the phone to ensure future wireless communication. If the distance is too long, the connection may fail.
    • Turn on the speakers and switch to pairing mode by pressing the corresponding button on the case. If not, then you should carefully study the instructions for use of the speakers.
    • Go to the phone menu and select the “Settings” icon (gray gear).
    • In the general parameters window, find the “Bluetooth” item and go to it.
    • Switch on the module by moving the slider to the appropriate position. After loading, a list of devices in the immediate vicinity and ready to connect will appear on the screen. The speakers will be displayed under the name of their manufacturer or model.
    • Click on the names of the columns and connect to them. Pairing may take some time, most often it takes no more than 2-3 minutes. If the columns are not visible, you can turn them off and on again or refresh the search list on your phone.
    • After pairing, the speakers are ready to go. You can test them, turn on any melody.

    Note! Sometimes, to connect to the speakers, you need to enter a password, which is indicated on their case or box. If it is lost, please refer to the speaker manual.