What is the SIM card in the iPhone 5s

Table of Contents


Reduced size sim card (15:12 mm). Used in 4th generation models and this: iPhone 4s and iPhone 4. The size was reduced by trimming excess plastic.

mini-SIM, regular SIM

This is a standard size card (25: 15mm) Used in the first 3 generations of iPhones, these include:

  • iPhone 3GS;
  • iPhone 3G;
  • iPhone.

Compared to current SIM cards, they look bulky due to the plastic around them. And these cards are not suitable for modern iPhones, they are too large.

card, iphone


The smallest SIM card (12.3: 8.5 mm). There was only a chip and a minimum of plastic edging. Used in iPhones from the 5th generation up to the latest models.

Nano-SIM is used in most iPhone models and is:

  • iPhone 5s, iPhone 5c, iPhone 5;
  • iPhone SE (1st and 2nd generation)
  • iPhone 6, iPhone 6 Plus;
  • iPhone 6s, iPhone 6s Plus;
  • iPhone 7, iPhone 7 Plus;
  • iPhone 8, iPhone 8 Plus;
  • iPhone X; iPhone XR
  • iPhone XS, iPhone XS Max;
  • iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max.

Types of SIM cards in the iPhone: how to find out which one is in your

If you remember the first SIM cards, it seems that they were too big. Since the appearance of the first SIM-card, they have changed only in one direction. decreasing. Manufacturers, of course, prefer to use increasingly smaller SIM cards. Because smartphones are getting thinner and thinner. Because of this, it is necessary to save space inside the phone case. And ultimately, they are moving away from the use of a physical card altogether. Instead, a dedicated chip is used. But first of all, let’s take a look at the evolution of SIM cards using the example of iPhone models. How to find out which SIM card is in the iPhone? The following are the types of SIM cards and, accordingly, in which iPhones are used.


eSIM is a special chip that is embedded in a smartphone. Consequently, this “SIM card” cannot be removed from the phone. Therefore, as a SIM card is physically absent. The size of this chip is 5: 6 mm, which is significantly smaller than its predecessors. These chips are embedded in models such as:

  • iPhone XS;
  • iPhone XS Max;
  • iPhone XR.

Before the advent of eSIM, the cards themselves did not change in any way. And just with each new generation, the plastic was cut off. For this reason, there were special devices for cutting SIM cards to the desired size. Some craftsmen could cut with simple scissors. Until mobile operators began to issue a SIM card for any size. All that was required was to displace the desired size from a special stencil.

Removing the SIM card without a key

  • If such a special key was not included in the kit, then an ordinary paper clip will help you. Straighten it and, acting like a key, insert it into the hole next to the SIM port.
  • In no case should you use a needle: there is a risk of spoiling the system of fixing the SIM card slot in the iPhone. Some people use a dental probe or a thin awl for the same purpose.
  • Be extremely careful when using such popular methods of extracting a SIM card from an iPhone: the slot can get stuck.
  • If the SIM card is still stuck, then do not rush to the iPhone service: you can even fix this error at home using a film from folders or a model knife.
  • Gently insert them into the hole between the iPhone case and the SIM port on the side of the phone screen and pull the plate, lightly pressing the SIM card slot against the screen.

iPhone is, first of all, a phone with which users make calls, send SMS messages, work with social networks via the mobile Internet. If you’ve purchased a new iPhone, the first thing to do is. insert SIM card.

You probably know that SIM cards come in different formats. Until a few years ago, the most popular option was a standard (or mini) size SIM card. But in order to reduce the area that it will fit in the iPhone, over time, the format has decreased, and to date, current iPhone models support the nano size.

The standart-SIM format was supported by devices such as the first generation iPhone, 3G and 3GS. Popular iPhone 4 and 4S models are now equipped with micro-SIM slots. And finally, starting with the 5th generation iPhone, Apple has finally switched to the smallest version. nano-SIM.

Preparing the SIM card

The first thing you need to do is prepare your SIM card. It must be of the correct size. For the fifth iPhone, this is a nano-SIM. This type of sim card is even smaller than micro.

If a user’s micro-SIM can be easily cut out by themselves, then experimenting with a nano-SIM is not recommended.

To cut your SIM card, you need to use specially designed scissors and a stencil. If you try to do this with ordinary scissors, without using a stencil, it is possible to damage the contacts.

If you do not have the tools necessary to cut a SIM card, order it from your operator or purchase a new one of the required format.

Features of installing a SIM card in iPhone 5, 5s and 5c

The release of the 5th version of the smartphone from Apple marked another round of evolution not only for the iPhone, but also for SIM-cards. This time, the developers decided to use a format called nano-SIM. The newest versions of the iPhone 5s and 5c also only work with this SIM card format. The new type of SIM-card has practically lost the plastic around the chip, and has also become a little thinner.

Read more:  How to Transfer Photos from iPhone to Samsung

Unfortunately, attempts to trim your mini- or micro-SIM to be compatible with the iPhone 5 or 5s are doomed to fail. The first time after the release of the iPhone 5, there was a shortage of SIM cards of the new format, and the option of obtaining a new SIM card from the operator was not feasible. However, now it is not relevant. Today, all major mobile operators have on sale SIM cards suitable for the iPhone 5 and 5s.

Installing a SIM card

When the SIM card is ready, you can proceed to install it. To do this, you need a paper clip, decorated in the form of a key, which, as a rule, comes with the iPhone.

If for some reason you don’t have one, use a regular metal paper clip. Just twist it into the desired key shape or into the letter “G”.

The SIM card is inserted into the right side panel. There is a special hole in which the key must be inserted. After a light press, a special case for the SIM-card will appear.

Pull out the case, insert the nano-SIM into it, and place the case back into the iPhone. The sim card is inserted with the picture up, with the microcircuit down, that is, the microcircuit should be facing the back of the smartphone. Although you will not be able to insert it in another way.

Now your iPhone is ready for use, you can turn it on.

Summing up, we can say that if your SIM card matches the standard dimensions for the iPhone 5, then there is no difficulty with installation. The only difficulty is to purchase a SIM card for the five in advance, but it can be solved quite simply.

Congratulations on a successful purchase, pleasant use!

P.S. I am attaching a screenshot of my earnings in affiliate programs. And I remind you that everyone can make money, even a beginner! The main thing is to do it correctly, which means to learn from those who are already earning, that is, from the professionals of the Internet business.

If you suddenly want to change the iPhone to another phone, but save the information on your SIM card, then you can use a simple paper clip or a special key that comes with the iPhone to remove the SIM card from the iPhone at home.

Preparing to use your smartphone for the first time

To insert a SIM card into a new iPhone 5s or some other model, the subscriber must first prepare the phone for the first use:

  • First of all, you need to make sure one hundred percent that the iPhone is not locked due to the change of mobile operator. A huge number of iPhones are locked to a particular mobile operator. If you want to switch to a different carrier, you will need to unlock the SIM slot in your own iPhone.
  • There are a significant proportion of iPhones that have absolutely no lock.
  • If the iPhone is still locked to a specific network, it needs to be unlocked.

Apple sets the tone for the cell phone industry by pioneering the latest standards in its devices. And despite the fact that immediately after the release of new models there is often a shortage of new components and accessories for “apple” smartphones, over time, the solutions used in them often become the standard for the industry as a whole.

How to insert a SIM card into an iPhone 5, how to remove a SIM card tray from an iPhone case without breaking it? Answers in this article, read to the end.

Do you want to know how to earn money consistently on the Internet from 500 rubles a day? Download my free book =

If you became the proud owner of the fifth iPhone, then you probably faced the question “how to insert a SIM card”? The fact is that they are not arranged at all like.

It can be difficult for beginners to understand how to safely pull out a special case for a SIM card. But to deal with this issue is not at all difficult.

card, iphone

How to insert a SIM card into an iPhone 5 yourself

In order to insert a SIM card into an iPhone, you do not need to disassemble the phone, open the panel, or pull out the battery. Everything is much simpler.

SIM card installation process

In most cell phones, the SIM card slot is located under the back cover and battery. But for the iPhone, this solution turned out to be unacceptable, because all Apple smartphones have a non-separable body. In this regard, the developers of “apple” smartphones had to take a different approach.

In the first generation iPhones, in particular, the original iPhone, 3G and 3GS, the SIM card slot is located on the upper end, next to the power button. A special tray is inserted into the connector, into which a SIM card is installed. To remove the tray, you will need a special tool that comes with the device.

However, if it is not at hand, any other delicate object will do. Just do not use sharp objects such as needles to remove the SIM card from the iPhone, otherwise you risk breaking the tray lock. Next, just put the SIM card in the tray and put it back in.

12 Answers to the Question “What SIM Card Do I Need for the iPhone 5s?”

What SIM card is needed for iPhone 5s? The release of this model into mass production forced the owners of these devices to change the format of the sim card. The microsim card was replaced by a nanoimage. The problem was that by the beginning of sales of this device, not all mobile operators had this card. The main differences from other samples are dimensions and thickness. The process of trimming a sim card for nanoimaging: 1Cut off the upper (where there is a beveled corner) and lower parts so that the length is no more than 12.3 millimeters. For these purposes, an ordinary ruler and sharp scissors are used. Be sure to remember the location of the beveled corner for its further restoration. If you have an old sim card, you can trim it along the contact area, since this will not affect its performance; 2 cut off the previously marked edges of the plastic so that the resulting width is. 8.8 millimeters; Next, it is necessary to recreate the corner, with the “capture” of the contact area, if necessary; 4so, our map is ready, all that remains is to take care of its thickness. The SIM card for iPhone 5s is 0.67 millimeters. You can, of course, use fine sandpaper, but for reasons of aesthetics, we can do without it. Considering that during manufacturing the contact pad is glued to a plastic base, it is advisable to pry it off with a sharp object (preferably with an ordinary blade), and then tear it off. This will not affect performance in any way; 5 SIM card on iPhone 5s is ready. In the process of the above actions, it will turn out to be even much thinner. But this can be solved much simply. for this you need to install a sheet of paper on a tray of small thickness or process it gently with fine sandpaper, as noted earlier. Then you should carefully clean the sharp corners that are immersed in the phone tray with a small file or sandpaper.

Read more:  How to Block a Card by Phone

How to cut a SIM card for the right phone model

Having determined the desired type of SIM-card, we proceed directly to the process of cutting the card, if necessary. As tools you will need: sharp office scissors; pencil; ruler; i-paperclip (tool used to open the SIM tray); sandpaper or nail file; patience (“Hurry. you will make a fool laugh”). The sequence of actions is as follows: Using the information about the parameters of the sides of the SIM-card, carefully draw the dimensions of the future card with a pencil on the old SIM. This process is the most critical, since if you make a mistake at this point, you can cut off the excess plastic, which will interfere with placing the card in the slot, or even damage the chip. It is imperative to draw a mowing line from the side of the chip. To draw the corner correctly, you need to lay the line on the edge of the chip parallel to the SIM corner. Marking is a very responsible process, it is important to avoid mistakes when drawing lines Using an i-paper clip, remove the tray from the phone, after turning off the device. Next, attach the SIM slot to the markings made on the old card. They must match in size. If everything is in order, then you can proceed to the next step. It is imperative to compare the size of the slot with the intended markup. After successfully drawing the outline, carefully cut off the excess part with scissors. You don’t have to try to cut everything at once, it is better to leave some plastic in order to prevent damage to the chip. Unnecessary thickness can be easily removed using sandpaper. Gently cuts off unnecessary plastic After the process of removing the excess part of the SIM, insert the card into the tray to check the dimensions. If the SIM is hard to fit into the recess, you can reapply the sanding paper. As a result, the SIM should easily fit into the card slot Before testing the SIM for functionality, turn off the phone to avoid malfunctions. Then insert the SIM-card tray into the special slot and turn on the phone. In case of successful pruning, the mobile network will immediately appear and will work without interruptions.

All Apple smartphones have only one connector for the communication chip. If you come across a phone that has two SIM card slots, then this is a fake. Although today the topic of dual-SIM smartphones is very popular, Apple has not yet given any information about what such an innovation is planned. Each iPhone has a corresponding SIM card, and to find out which one fits your phone, you only need to know its model.


The next SIM card upgrade for the iPhone received with the release of the fifth generation of smartphones. All devices starting from model 5 have nano-SIM. On the outer edges, it lacks plastic, and it is directly the chip itself. If your communication card does not match the device, then you can contact the department of your mobile operator, where they will replace you with the required format. Buying a new communication chip is not worth worrying about, today all operators produce universal cards. Then you just need to break out the format corresponding to your smartphone. It is also possible to trim the old SIM-ki, for this there are scissors or a cutter. But devices can malfunction, so it’s better to replace it anyway.

What is the SIM card on the iPhone 5s

To determine which SIM card is in the iPhone 5, it is necessary, from the beginning, to determine the type of iPhone. In case of damage to the SIM card tray or the device itself, if this is the result of the use of a homemade card, it is not covered by Apple’s warranty obligations for the equipment produced. It is necessary to take into account the important fact that when using a cut card, there may be a problem in the process of connecting to a telecom operator and accessing some functions. In cases of inconsistency of the old model of the card for the new iPhone, it is advisable to contact your cellular mobile operator to transfer the account connection to the sim card that comes with the iPhone. To clarify which type of card is suitable for the iPhone 5s or to obtain a suitable option (if the phone was delivered without it), you need to contact your mobile operator.

Table: using SIM cards in Apple devices

SIM type iPhone model that supports this type of SIM iPad model that supports this type of SIM Mini-SIM iPhone 3 GS, 3G – Micro-SIM iPhone 4, 4SiPad, iPad 2, The New iPad (third generation), iPad with Retina Display (aka iPad 4) Nano.SIMiPhone 5, 5S, 5C, 6, 6 PLUS, 6S, 6S PLUS, SE, 7, 7 PLUSiPad Pro iPad Air, iPad Air 2 iPad mini 1G, iPad mini 2, 3, 4 Built-in SIMiPad Pro (9.7 inches, Wi-Fi Cellular) comes with an embedded Apple SIM. But this iPad also has a Nano-SIM slot. That is, you can use a mobile carrier’s Nano-SIM or Apple SIM. Apple SIM card must be activated in advance, otherwise it will not be supported by the device

Regular SIM

It is used in the first iPhone models: the first generation, the 3G version, and the updated 3GS. If there is a discrepancy in the type of card, you should contact the operator of the cellular network you are using and replace it with the correct one.

eSIM (virtual SIM)

A gadget with eSIM support does not require a SIM card in its standard sense as a physical object; in fact, it turns into a miniature component on the logic board of a smartphone. At the moment, many large operators already provide full support for the eSIM format.

  • iPhone 12 Pro Max;
  • iPhone 12 Pro;
  • iPhone 12 mini;
  • iPhone 12;
  • iPhone 11 Pro Max;
  • iPhone 11 Pro;
  • iPhone 11;
  • iPhone SE 2;
  • iPhone XS;
  • iPhone XS Max;
  • iPhone XR
  • iPad Pro 12.9-inch 3rd generation (Wi-Fi Cellular) or later
  • All 11-inch iPad Pro models (Wi-Fi Cellular)
  • iPad Air 3rd generation (Wi-Fi Cellular) or later
  • iPad mini 5th generation (Wi-Fi Cellular).


In 2012, Apple took another step towards getting rid of useless plastic and reduced the slot in the then new iPhone 5 to the dimensions of Nano-SIM. 12.3 × 8.8 × 0.67 mm, while still having reverse support for previous formats (any SIM can be cut to nano, and nano can be placed in a larger slot if desired).

  • iPhone 5;
  • iPhone 5s;
  • iPhone 5c;
  • iPhone 6;
  • iPhone 6 Plus;
  • iPhone SE;
  • iPhone 6s;
  • iPhone 6s Plus;
  • iPhone 7;
  • iPhone 7 Plus;
  • iPhone 8;
  • iPhone 8 Plus;
  • iPhone X;
  • iPhone XS;
  • iPhone XS Max;
  • iPhone XR
  • iPhone SE 2;
  • iPhone 11;
  • iPhone 11 Pro;
  • iPhone 11 Pro Max;
  • iPhone 12;
  • iPhone 12 mini;
  • iPhone 12 Pro;
  • iPhone 12 Pro Max;
  • iPad mini and newer;
  • iPad Air and newer
  • iPad Pro all versions;
  • iPad (5th generation) and newer;

What is the SIM card in the iPhone and iPad: a list of all models and sizes (types) of SIM cards, including Apple SIM, eSIM and Dual SIM

Perhaps the SIM card slot (like the plastic itself with the chip) is one of the most archaic elements of a modern gadget. Much more important modules are made less cumbersome, and we still sometimes cannot move a SIM card from one device to another due to format incompatibility. In this article. the evolution of SIM cards in the iPhone and iPad.

Read more:  iPhone 11 connect to computer

Regular SIM (Mini-SIM)

Despite the fact that the Micro-SIM format appeared back in 2003, the first three Apple smartphones were equipped with slots for ordinary, or, as they are sometimes called, full-size SIM cards. If you are engaged in literary studies, then this format is officially called Mini-SIM and implies a card size of 25 × 15 × 0.76 mm.

Integrated Apple SIM (iPad only)

In 2016, the apple company first released a tablet with a built-in branded Apple SIM (previously it could be used optionally in a regular tray). Apple SIM is not tied to any specific operator, the user can connect to any service provider anywhere in the world simply through the settings menu. At the same time, in parallel with Apple SIM, the tablets from the list below have a regular tray for a Nano-SIM card.

We talked in more detail about the work of Apple SIM and the support of this technology in Russia in this article.

  • iPad Pro 12.9-inch 2nd generation (Wi-Fi Cellular)
  • 10.5-inch iPad Pro (Wi-Fi Cellular)
  • iPad Pro 9.7-inch (Wi-Fi Cellular).

After the release of these tablets, Apple switched to using eSIM.


The most popular format, which is gradually being replaced by nano-SIM cards, has the same chip size as the Mini-SIM, but a much more compact plastic base, overall dimensions. 15 × 12 × 0.76 mm.

  • iPhone 4;
  • iPhone 4S;
  • First iPad;
  • iPad 2;
  • iPad (3rd generation)
  • iPad (4th generation).

iPhone dual SIM

Starting with iPhones released in 2018, Apple began equipping smartphones with a tray for two active Nano SIM cards for some regions. The iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone XS Max and iPhone XR models with such a novelty specific to Apple have so far been released exclusively to the Asian market (China, Hong Kong and Macau). but they may well work in Russia and in other countries of the world with any operators. We wrote more about the two-digit iPhone here.

What is the SIM card in the iPhone 12?

For them, the American company releases iPhone 12 (Pro, SIM) with 2 SIM cards of the “most common” type of nano.

What is the SIM card in the new iPhone?

iPhone can connect to a mobile operator’s network using a physical nano-SIM card. iPhone XS, iPhone XR, and later models support two SIM cards: one physical nano SIM and one eSIM (not available in all countries / regions).

iPhone 5 / 5S / SE HOW TO: Insert / Remove a SIM Card

What SIM card is needed on the iPhone 11?

In mainland China, Hong Kong and Macau, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone XS Max, and iPhone XR can use two nano SIM cards.

What is the size of the SIM card in the iPhone 7?

What is the SIM card format for Apple iPhone 7? The company uses a nano-SIM in the Apple iPhone 7.

What is the SIM card in the iPhone CE?

The camera also supports all the functions that flagship models have. portrait mode, advanced Smart HDR, 4K video, etc. iPhone SE second generation supports two SIM cards. regular and eSim.

Where to insert the SIM card into the iPhone 11?

The SIM card tray in iPhone 11, iPhone XR, iPhone XS Max, iPhone 11 Pro, and iPhone 11 Pro Max for Mainland China can hold two nano-SIM cards at the same time. For the following devices, the SIM card tray is in the right side panel.

How many SIM cards are in the iPhone 5 S?

Specifications 4 ″ Smartphone Apple iPhone 5s 16 GB gray

Factory data ASC guarantee 12 months.
SIM card format Nano-SIM (12.3 × 8.8 × 0.67mm)
Number of SIM-cards 1 SIM

How many SIM cards are in the iPhone 5 s?

Specifications 4 ″ Smartphone Apple iPhone 5s 16 GB gray

Factory data ASC guarantee 12 months.
SIM card format Nano-SIM (12.3 × 8.8 × 0.67mm)
Number of SIM-cards 1 SIM

What SIM card is needed for iPhone?

Nano-SIM supports iPhone 5 / 5S / 5C, 6/6 Plus / 6S / 6S Plus, SE, 7/7 Plus, iPad 5th generation, iPad Air, iPad Mini, iPad Pro.

How many SIM cards are in the iPhone 6 S?

Until recently, the dual SIM iPhone was something of a fantasy. Unless, of course, the Chinese counterfeits of the Apple smartphone are excluded. However, at present, iPhone 6 users will be able to work with two SIM cards at the same time.

What is the SIM card in the iPhone 6S?

IPhone 6 uses the same SIM card as the 5th generation of devices. nano format.

How many SIM cards are in the iPhone SE?

Specifications 4.7 ″ Smartphone Apple iPhone SE 2020 128 GB white

Factory data 12 months warranty.
SIM card format Nano-SIM (12.3 × 8.8 × 0.67mm)
Number of SIM-cards 1 SIM
ESIM support there is

What is the SIM card in the new iPhone?

iPhone can connect to a mobile operator’s network using a physical nano-SIM card. iPhone XS, iPhone XR, and later models support two SIM cards: one physical nano SIM and one eSIM (not available in all countries / regions).

How to insert a SIM card into the iPhone 11?

The SIM card tray in iPhone 11, iPhone XR, iPhone XS Max, iPhone 11 Pro, and iPhone 11 Pro Max for Mainland China can hold two nano-SIM cards at the same time. For the following devices, the SIM card tray is in the right side panel.

How To Insert Sim Card In iPhone 5S

How many SIM cards are in 7 iPhone?

Specifications 4.7 ″ Smartphone Apple iPhone 7 32 GB pink

Factory data 12 months warranty.
VoLTE support there is
SIM card format Nano-SIM (12.3 × 8.8 × 0.67mm)
Number of SIM-cards 1 SIM