LG how to tune digital channels

Setting up digital channels on LG TVs

Digital TV is especially popular with the residents of Russia. The free channels are available to many people anywhere in the country. In addition, you are protected from the interference that can occur with conventional over-the-air television, as the digital signal does not depend on any external factors, including the weather.

After the appearance of DTV began to appear companies that are willing to tune the TV for a certain amount of money. But the thing is that you do not need to use their services, because if you follow the instructions, you can configure digital and terrestrial channels by yourself.

To watch free TV channels requires that the TV has a built-in tuner. LG TVs, both new and old, mostly support these settings, so it’s easy to tune them. However, if you are not sure about the capabilities of your own TV, then you need to open the characteristics and discover its parameters, such as DVB-C or DVB-T2.

There are two ways of setting digital channels on LG TVs: a quick and a long. In this article we will talk about both methods.

LG how to configure digital channels

In order to configure digital television channels in high definition in the vast majority of LG models, press “Menu” (on newer models “Settings”) on the remote control, you will open the TV menu, which will need to select the section “Options”.

Select your country Finland or Germany;

Then go to “Setting” (“Channels“) menu, “Auto search” item.

Specify the way of connection to TV “Cable TV”.

In the channel settings menu you will select “Type” item and press “ENTER” button. “Network.”.

In the items below you need to specify the network parameters, these are: Start frequency. 338000; End frequency. 610000; Network ID. Manual and below 915. Press “Nextqot

In the next window you can refine your channel search: Digital Only. if check this item, then only digital channels will be searched. If not marked, digital and analog. Skip encrypted programs. If you tick this item, all pay channels for which no payment has been made or cam-module with access card is not installed will not be configured. Press “Execute”

In the next window you will see the progress of channel configuration, when finished you can exit the settings menu.

An important feature of LG TVs is the “Automatic channel update. You must disable it, otherwise the TV will periodically reset the list of channels you’ve tuned in. This is done in the “digital cable settings”. Auto channel update: Off.

How to configure cable, digital and satellite channels on your LG TV

Digital and cable channels. What you need to know?

Digital signal allows you to watch channels with an ordinary antenna, but requires a tuner. Cable signal is connected to your TV through a cable from your provider.

• Setting up a cable and digital channel is similar. To configure channels, you will need a signal cable and a remote.
• Press “Settings” button on your remote control to enter settings menu. Go to “Channels”, press “OK”, then “Auto search” and “OK” again.
• In the “Autodetect” menu, when you select the input source, check the box “Antenna” and “Cable TV”.
• Select your operator from the list or press “other operators. In the window that opens, enter the data, which can be found on the website of your service provider. Press “Next” button. If you have difficulty filling it in, contact your service provider’s technical support for advice.
• Now you need to choose your search options. Check the types of channels you want to watch. In most cases you need to check “Only digital”. Press “Execute.”. You can find out the exact requirements on the website of your operator.
• The search takes a few minutes. When it is finished, click “Done”. TV tuning is complete. Have a nice view!

Satellite channels. What you need to know?

Satellite signal is delivered through a satellite dish. You need to know the input data about the operator and satellite dish to configure the channels on your TV.

To set up satellite TV, follow steps 1 and 2 above. Next, in the menu “Autodetect” when selecting the input source check the box “Satellite” only. In the window that appears, enter the data that you were given by the operator when connecting.

Programs for WebOS allow you to expand the functionality of TV. You can also watch clips on YouTube and use IPTV.

How to tune digital TV on your LG TV?

Digital television is becoming increasingly popular among the population, since it has a number of advantages. Among the main. high quality picture and sound and a wide range of channels.

In order to tune digital channels on your LG TV, you must make sure that the TV has a built-in tuner. You can check it in the characteristics on the LG official site or in the manual, the characteristics should specify such parameters as DVB-C or DVB-T2.

If LG TV was produced before 2012, you have to buy a DVB-T2 set top box for your old TV in order to tune it.

Note that both the external set-top box and built-in tuner do not act as an antenna. And to tune free digital channels, you’ll need to first connect your antenna. Compact decimeter antennas are usually used for digital TV broadcasts.

Let’s see step by step how to configure digital channels, and how to set up a TV LG. It does not matter what model of LG TV you have, setting up channels follows the same algorithm:

• Press the icon of a house on the remote control to access the main menu. From the list you need to select “Settings” (in some models it is enough to press immediately on the remote control icon with the image of a gear to go to the settings).
• Select the “Options” section (or “Settings”), make sure you select the country Russia and set the correct date and time. If your LG TV was released before 2012, and you have to connect the set-top box, it is better to choose the country Germany, but you have to choose Russian, and set the correct date and time.
• Then select the section “Channels” (or “Setting”), in the window that appears, click on “Autodetect”.
• The TV prompts you to select the connection source. Select “Cable” if you have pay cable TV. Or “Antenna” if you want to connect to free channels.
• If you select “Cable”, then select your operator from the list or press “Other operators”. In the window that appears, enter the data that can be found on the website of your service provider. Click “Next”. If you have difficulty filling it in, please contact the technical support of your service provider.
• After that, check the box “Only digital broadcasting” and press “OK”. It can take up to 20 minutes to search for digital channels.
• When the digital channels are found, click “Done”. The TV setup is now complete.

If you are faced with the fact that the TV does not find digital channels, you will need to manually configure the digital channels. Manual configuration of digital channels means that you will need to manually enter the data in the lines “Frequency” and “Channel”. You can see this information on the operator’s official website, or you can use RTRS mapping service.

Additionally, here’s how to connect a DVB-T2 set-top box. You can connect the set-top box to your old equipment via HDMI or “cinch”. If there is an HDMI connector, choose it, because the image quality will be better:

• Select the HDMI or RCA signal in the TV menu (depending on which connector you connected the receiver).
• Further settings are made using the remote control from the receiver, not the TV.
• Select “Channels” (or “Tuning”), and in the window that opens, select “Manual Scan”.
• On RTRS website, you need to find the required frequency. To do this, enter your municipality and find the tower nearest to your home.
• In the line “Frequency channel” select the one that was specified on the RTRS website after the letters TVK.
• The TV automatically finds the bandwidth. 8M, leave it and click “OK”.
• After that the STB finds the channels, fixes them and will broadcast.

If you have set up channels and after a while they are gone or reordered differently, it is probably due to the auto-update feature. It is enabled by default in most LG Smart TVs. To disable it, you need to:

Possible problems and their solutions

Users may experience all sorts of problems while setting up digital:

It is necessary to immediately rule out problems with the TV. For example, the picture can be absent due to a broken screen matrix. Be sure to check the correct connection.

No image

To determine why LG TV does not show digital channels, you need to start diagnosing the equipment used. Be sure to inspect the coaxial cable for mechanical damage and deformation. Make sure that the TV antenna is pointed towards the repeater and it has sufficient power.

It is quite possible that it is because the TV set doesn’t support DVB-T2 that problems with digital tuning arise. So, the user needs to buy a digital set-top box.

Not all channels are found during the auto search

Auto search is a very convenient and useful feature, but it is more suitable for subscribers who live in the zone of reliable reception. It is possible that residents of regions remote from the TV tower autodetection will not allow to tune absolutely all free channels. There is a way out of this situation. It is necessary to try to find channels manually. Of course, the procedure takes longer, but it involves a more thorough analysis of frequencies, so the chances of success increase. What to do if there are still found only one multiplex channels? The best option. to buy a new antenna with an amplifier. This option will configure all free TV channels without exception.

How to configure digital channels on the TV set LG through the automatic search

Using the remote control enter the menu by pressing the setting button. Choose a channel section and click on auto search in the list.

Then you need to put a tick in front of the method of receiving the signal. It can be antenna, cable or satellite and then press Next.

Next, by putting a check mark next to the option for digital channels only, you select whether the previous channels will be deleted. Press Execute and wait for automatic tuning.

After the full search, this window will tell you how many channels were found and to save the result you just need to click Close and exit the menu.

Now you know the easiest way to set LG TV to digital channels. You can always contact LG service center.

LG TV remote control button assignment

Assignment of LG TV remote control buttons

Remote control for LG TV has four zones in which the remote control buttons are located.

Zone A of the remote control contains buttons to turn on, select a signal source and the main Menu

• I. Switching on your LG TV
• TV/RAD. Switch to radio mode
• INPUT. Changing the input source
• SETTINGS. button to access the main menu
• Q.MENU. access to quick menu
• INFO. Current program and input information
• SUBTITLE. Turn on subtitles display

Area B is the program and volume control area. Here are the most frequently used buttons.

• GUIDE. TV Guide, show program guide
• Q.VIEW. return to the previous channel
• FAV. Access to favourite channels list
• 3D. To turn on the 3D mode on your LG TV
• MUTE. mute button
• \-. volume control
• PAGE. channel switching

Zone C of the remote control contains buttons for navigating LG TV menus. Here you can select and adjust various settings.

• RECENT. display previous actions
• Smart. Access to the home screen of Smart Home
• Live Menu. button lists: Recommended, Program, Search, Recorded
• Text. is used to work with teletext
• Up\Down\Left\Right. navigation buttons
• KOK. Selecting menus or parameters and confirming your entry
• BACK. return to previous level
• EXIT. Closes the viewing window and returns to the LG TV viewing mode
• AD. turn on the sound description function
• REC. Starts recording and displays the record menu
• Control buttons. Video, photo and audio playback
• Color buttons. Access to special functions on some menus

On our site you can download TV remote control location and designation of remote control buttons, as well as instructions and user manual

LG 42lb650 TV tuning.

LG television set up by pressing MENU button on the remote control. The section icons, the names of which speak for themselves, will appear on the screen.

In the “Tuning” section you can search, tune and sort television channels. The option “Antenna” is set if you use an indoor or outdoor antenna for terrestrial television. The option “Cable” is set when the TV is connected to a cable network. If you do not intend to watch paid digital channels, it makes sense to select from “Analog channels only”, “Digital channels only”, “Digital and analog channels” first before setting up the TV.

LG TV to the picture settings. brightness, contrast, saturation and color tone. Note that brightness adjustment in LCD TVs is made in a small range compared to the TV kinescope.

How to configure LG to receive digital TV channels

In order to tune your LG TV to receive digital TV channels, you must:

• Press the Smart button to access the start menu
• In the Setup section, select digital TV channel mode
• To receive digital terrestrial TV channels, you need to set the DVB-T2 parameter
• To receive digital satellite TV on LG, you should set DVB-S option
• To view cable digital channels on your TV, should be set to DVB-C

pcmcia card slot on your LG TV what is it?

pcmcia card slot. is a special connector. A slot on the side of LG TV in which a so called conditional access card can be installed.

Such a card is necessary to view paid digital TV channels, coming through a satellite dish, or through an antenna cable. Conditional access card has an individual number and is linked to the account number of a digital TV subscriber.

Thus, pcmcia card slot slot is available in every modern TV, and is required to view paid digital programs.

Setting digital channels on televisions LG

Depending on the model, the interface and structure of the menu may differ, but the general sense and the order of actions remains relevant.

Enter Setup menu. If your TV is equipped with Smart TV press [Home] button on the remote control and select “Settings”, if your TV is without Smart TV just press [Menu] button on the remote control

Note! Some models require PIN code at one stage of setting. If you have not set your own, try to enter one of the standard ones: 0000, 1111, 1234

Note! If you have selected one of the Western European countries, change the main audio language in Language item to Russian

After changing the country, the TV will immediately offer to auto-tune channels. If not, go to “Settings” and select the “Autodetect” item

In the signal sources, select “Cable”. If this option is not available, or the TV set doesn’t offer you to choose source of a signal, it means either you have entered the wrong country, or your TV set doesn’t have a DVB-C tuner, and can’t set up digital TV

Select the search type “Quick” and enter the following search parameters:

Depending on the TV model and the selected country, some options do not need to be entered.

The TV might ask you for a few more options. Then check the boxes as follows:

If you’ve done everything correctly, your TV should find about 58 channels

After searching for channels, you need to set the TV’s internal clock, to do this, go back to the settings menu and select “Clock” under “Time”

Set it to Auto (the exact time the TV gets from the cable network). When selecting the time zone, specify “Offset” and “GMT”

Attention! If after changing the mode to “Auto”, the time zone selection will not be available, just wait a few seconds or exit this menu and re-enter

On some models of TV sets Autourenewal of channels doesn’t work correctly. If after turning on the TV, the channels are reset, but you need to turn it off.

To do this, in the “Setting” select the item “Digital Cable Setup” and in the line “Auto Channel Update” set “Off”.”

Poor quality of a picked up signal and general features of the room antenna in the country

Be careful: TV antennas are subject to lightning current. do not use TV during thunderstorms. Temporarily living on a country site, one way or another, you have to turn on the TV to be aware of city events. But in some areas the quality of digital image leaves much to be desired, and it makes no sense to install an outdoor antenna. Let’s discuss how to enhance radio reception with a standard room antenna.

• Try to change the location of your antenna, or simply rotate it in the opposite direction. Sometimes the TV signal comes to you from another tower than the local one.
• Do a manual channel search on your TV after the manipulation.
• Connect a special amplifier to the cable of the TV-receiver (they can be bought at radio markets).
• Remove possible interfering objects: even a simple statue of metal can cause poor reception signal.
• Check the cable integrity. very often it bends precisely at the connection to the plug.

To construct an antenna or amplifier with your own hands you need to know exactly the working scheme of the device. If your antenna is functional, then the following ways can solve the problem of poor picture quality. Otherwise, try to change the room receiver. the internal construction could be defective. Remember that the indoor antenna should be used only for its intended purpose. If it’s a receiver for a TV set, you shouldn’t try to connect it to the radio or other devices. In the apartment room antenna manages to take out even on the roof of the balcony. it is not clear yet, whether there is a result. Try not to expose the device to water and dust. Very soon it can affect the performance of the antenna.

Do not unknowingly use any amplifier for a room antenna: there are models with built-in equipment, and some that simply do not support such a system. You can read more about this feature in the manual to your repeater. If you use a digital set-top box for digital TV, be sure to buy a power supply for the antenna.