How to refuel a Canon paint printer. Cartridges XL

How to refue the cartridge of the jet printer Canon

The cartridge is a special container designed to maintain paint. If you use the printer every day, then naturally the paint ends too fast. In such situations there are two options for choosing:

We can either purchase a new container for ourselves, which is not so cheap, or try to refuel your container on your own. Few people can afford such a risk as buying a new container, and therefore we will talk about the second solution, and this is an independent refueling. With every year, depending on how our favorite modern office equipment is developing, the requirements of customers are growing, and besides this, there are more and more those questions that we want to know about its maintenance. Statistics show that much of the number of questions on the topic of Canon printers on how the container filling procedure is performed. That is why this article will tell you about how to refuel a laser canon cartridge yourself.

A jet printer is an inexpensive option for home use. Such equipment copes well with the seal of photos and excellent with the text. The disadvantage of the jet printers is the print speed. slow. To learn how to refuel the cartridge yourself, it is necessary to clarify the exact name of the model. To know what ink should be purchased to fill the cartridge tank. Before refueling the Canon Canon cartridge yourself, you should buy in a specialized store the corresponding models of the ink device, so that at the first signs that the ink ends, perform the procedure. In addition, it may be required: a pharmacy syringe; latex gloves; stationery knife; newspapers.

The most important stage is the selection of high.quality ink. The user instructions and the printer packaging indicate the models of built.in cartridges. It is for them that you must buy paint. Unfortunately, there is no ink from the producer of the printers, so do not skimp on good paint, otherwise you will get a bad print, dried nozzles and a faulty printer.

How to refuel a jet printer Canon

When you prepare the necessary items, you can start organizing a workplace. To do this, cover the countertop with unnecessary newspapers or paper so that excess ink does not spoil the surface. Wearing gloves, you can start refueling the cartridge, filling each syringe with paint of a certain color. We go to the gas station. Remove cartridges from the carriage, pulling for a special, plastic tip or by pressing the fixer button. Study the tank. On the back you will see a sticker that closes the gas stations, carefully remove it, but do not throw it away! Typically, there are ready.made holes for refueling in the cartridges, but if they are not found, then make neat punctures with a needle in the corresponding recesses. The next step is to extract consumables containers. In the All-In-on Printer manufacturer Canon, the removal of a cartridge for refueling it can occur in different ways. In some models, the carriage with containers is extended automatically, and in some you should press the key and at the same time pull the special ledge under the lid that hides the carriage. After taking out the consumables, you can independently refuel them if you remove the sticker with the help of a stationery knife. Having discovered special openings of the air intake under the sticker, expand them. To do this, it will be possible to apply a hot shelot or drill. This is necessary that additional pressure is not created inside the tank. Next, you can proceed to the procedure of the cartridge refueling itself. Before filling the Canon laser cartridge yourself, you should carefully study the location of the flowers. As a rule, there are only one hole on the containers of black cartridges, and there are three of them on the tanks of color cartridges (red, yellow, blue). Therefore, carefully inspect the cartridge tank to introduce colors according to their location. The color cartridge should be seasoned with especially carefully and following the strict sequence: 1. one. yellow; 2. 2. red paint; 3. 3. Blue. How to refuel a jet cartridge Canon yourself

When refueling the Canon cartridge, enter the needle filled with ink syringe at an angle of 45 and only 2/3. Excess paints protruding to the edges must be pumped back into the syringe. After the process of refueling the cartridge, the sticker is mounted in place, and containers are installed in the device. Now the cartridge is ready for operation. Below is a useful and interesting video, which will make the processing process even easier and more understandable: it is more difficult to control with models without cork. If you came across this particular miracle of technology, then you should suffer pretty much. The smallest evil will be a puncture of the bunker, where a toner is stored, which can be done with the help of a soldering iron, drill or scalpel. Be very careful and choose a place for a hole distant from all kinds of chips and chips. Then insert a funnel into the hole and pour the powder. Or disassemble the cartridge until you find the gap for refueling. Unfortunately, in the second option, a photocell is not excluded and the printer is out of order.

Refueling technology

You can check the quality of the independent cartridge yourself with two methods.

• Physical. Cleaned paper towels on the table. With a light pressure, attach each cartridge to them alternately. A clear black print should remain on the towel. From CL-441 there will be a print at the same time three colors.
• Program.After refueling, you can print a duz test and snot. To do this, go to the “Start”, select “Management”-“Equipment and Sound”-“Devices and Printers”. In the list that opens, find the desired printer and click on it with the right mouse button. In the menu, select “Printer properties”. In the “Service” tab, start a sopel check. After the audit end, evaluate the print quality. If necessary, run simple or deep cleaning on the same tab.

Blocking print

After refueling the cartridge and installation in place, the printer may stop printing, in parallel it will be given a message about the insufficient level of ink. This situation is characteristic of the first refueling. To turn off the notification, find the “Cancel” or “Stop” button on the printer case, click and hold for 20-30 s. After, release the button and try to print the page.

Initially, in printing devices, manufacturers install starting re.refueling cartridges with incomplete ink loading. This is specially done so that the user will soon buy new consumables.

Re.refueling cartridge with intensive use will not last long. To make the consumables for longer, you can buy an analogue with increased capacity. 440xl, 441xl.

They are placed twice as much dye than in starting models. Black paint is poured with 15-20 ml, and color-6-8 ml. With proper operation, enlarged analogues can “survive” several dozen gas stations.

Instructions for refueling cartridges Canon PG-40, CL-41 PG-510, CL-511, PG-512, CL-513 for printers Canon Pixma MP140, MP190, MP210, MP220, MP240, MP250, MP260, MP270, MP280, MP450. MP460, IP1200, IP1300, IP1600, IP1700, IP1800, IP1900, IP2200, IP2500

Attention. An empty cartridge must be re.referred immediately after it has ended or after a small amount of time (several days, week). A long simple printer with empty cartridges will lead to the drying of the ink on the printing element of the cartridge, which will lead to a noticeable deterioration in the quality of the print. In addition, such cartridges cannot be reused.

And of course, the Canon cartridges themselves, which we will refuel.

It is better to start learning to refill cartridges from a black cartridge, t.to. It is easier in design (one color) and you will have more chances to get a positive result.

PG-37, PG-40, PG-50 cartridges: these cartridges are outwardly identical, differ only in capacity, PG-37 of the lowest capacity, PG-40 of the average, PG-50 of a large capacity, refueling process we will analyze the example of the PG-37 cartridge:

Under the label you will see air holes and a special system of air channels.

To refuel the cartridge, it is necessary to expand the air holes, for example by a drill with a diameter of about 1-1.5 mm, an awl, a screwdriver or any other sharp object or a tool at hand, in the place of the red point, as shown in the figure.

Recommendation: To expand the gas station, do not use the needle that you plan to refuel the cartridge in the future, so as not to break or score it with plastic.

Try that plastic chips do not get into the cartridge when drilling. If all the same chips hit, then this is not very scary, t.to. Inside the cartridge there is a special sponge holding ink, as well as the filter protecting the print head.

About 10-12 ml of ink goes to one refueling of the black cartridge.

We take a syringe with a capacity of 10 ml, pick up about 10 ml into it, carefully insert the syringe needle into the hole until you feel that the needle rested on the sponge that is located inside the cartridge, passes half the sponge and slowly introduce the ink. The needle can be inserted all the way, not afraid to pierce the cartridge, in the figure the red line shows to which the sponge is located, which holds ink.

If you poured too much ink and they began to spill out of the expanded air opening, it’s not scary, just pump them back into the syringe and wipe the cartridge with a napkin.

After we have done this procedure, we take the cartridge for the upper part and easily shake down, if ink appeared on the print head, we repeat the procedure and pull a little more ink, do this until a drop on the print head appears after shaking the print. If the drop is no longer formed, then we check the mark that leaves the cartridge on the napkin. We lean the cartridge by the printing head against the napkin, and look that the fingerprint clearly coincides with the size of the print element in length. The print should be even, without gaps. If the gaps still take place, then I advise you to turn the cartridge with a print head up and drip a green “Mr. Muscle” on them, wait for the moment the “muscle” is absorbed into the print head and try to make an imprint on the napkin again, if there is no result, then repeat the procedure repeatedly.

That’s all, the cartridge is filled, it remains only to glue the label back and install the cartridge in the printer.

Attention! If you use adhesive tape instead of label, you should not seal all the air channels completely, you need to leave at least a small part of the air track open otherwise, there may be problems with printing.

After installing the cartridge in the printer, if necessary, turn off the monitoring control control of the ink levels, print the dozen checking page and clean the print head.

With cartridges 0 and 0, the processing process is exactly the same, the only difference is that they have more sponge, accordingly, they will keep ink more.

CL-38, CL-41, CL-51 cartridge: since we already know how to refuel black cartridges for these printers and All-in-One Printer, it will not be difficult for us to refuel color cartridges CL-38, CL-41, CL- 51.

For cartridges PG-510, PG-512, PG-37, PG-40, PG-50, CL-511, CL-513, CL-38, CL-41 The following color scheme is relevant:

The location of the colors in the cartridges Canon CL-511, CL-513, CL-38, CL-41

Color diagram of cartridges PG-510, PG-512, PG-37, PG-40, PG-50, CL-511, CL-513, CL-38, CL-41

The only difference in the gas station is that you will have to fill in ink not in one camera, but in three different cameras of different colors of ink. Now the most important thing is not to confuse them. The figure shows where and what color to fill in ink. I also ask you to pay attention to the fact that ink would be poured in moderation, and they do not flow from all sides. We do everything exactly as for a black cartridge only for each color separately. Pour 4 into each camera 4. 6 ml. See that after refueling from below, ink does not flow from the print head.

The figure shows in which place to make holes for refueling the photo of the Canon cartridge and what ink to fill in which holes, we will not describe in more detail the refueling process since everything is described above.

PG-510, PG-512 cartridges: For new printer models, Canon came up with a new design, their refinements affected not only the appearance of the printers, but also the cartridges that use these printers. The figure shows cartridge 10 (PG-510), it differs in appearance from the PG-37 cartridge, but the processing process is exactly the same. PG-512 cartridge is equivalent to the PG-40 cartridge, it has a sponge more volume than PG-510.

Instructions for refueling cartridges Canon PG-40, CL-41 PG-510, CL-511, PG-512, CL-513 for printers Canon Pixma MP140, MP190, MP210, MP220, MP240, MP250, MP260, MP270, MP280, MP450. MP460, IP1200, IP1300, IP1600, IP1700, IP1800, IP1900, IP2200, IP2500

Attention. An empty cartridge must be re.referred immediately after it has ended or after a small amount of time (several days, week). A long simple printer with empty cartridges will lead to the drying of the ink on the printing element of the cartridge, which will lead to a noticeable deterioration in the quality of the print. In addition, such cartridges cannot be reused.

And of course, the Canon cartridges themselves, which we will refuel.

It is better to start learning to refill cartridges from a black cartridge, t.to. It is easier in design (one color) and you will have more chances to get a positive result.

PG-37, PG-40, PG-50 cartridges: these cartridges are outwardly identical, differ only in capacity, PG-37 of the lowest capacity, PG-40 of the average, PG-50 of a large capacity, refueling process we will analyze the example of the PG-37 cartridge:

Under the label you will see air holes and a special system of air channels.

To refuel the cartridge, it is necessary to expand the air holes, for example by a drill with a diameter of about 1-1.5 mm, an awl, a screwdriver or any other sharp object or a tool at hand, in the place of the red point, as shown in the figure.

Recommendation: To expand the gas station, do not use the needle that you plan to refuel the cartridge in the future, so as not to break or score it with plastic.

Try that plastic chips do not get into the cartridge when drilling. If all the same chips hit, then this is not very scary, t.to. Inside the cartridge there is a special sponge holding ink, as well as the filter protecting the print head.

About 10-12 ml of ink goes to one refueling of the black cartridge.

We take a syringe with a capacity of 10 ml, pick up about 10 ml into it, carefully insert the syringe needle into the hole until you feel that the needle rested on the sponge that is located inside the cartridge, passes half the sponge and slowly introduce the ink. The needle can be inserted all the way, not afraid to pierce the cartridge, in the figure the red line shows to which the sponge is located, which holds ink.

If you poured too much ink and they began to spill out of the expanded air opening, it’s not scary, just pump them back into the syringe and wipe the cartridge with a napkin.

After we have done this procedure, we take the cartridge for the upper part and easily shake down, if ink appeared on the print head, we repeat the procedure and pull a little more ink, do this until a drop on the print head appears after shaking the print. If the drop is no longer formed, then we check the mark that leaves the cartridge on the napkin. We lean the cartridge by the printing head against the napkin, and look that the fingerprint clearly coincides with the size of the print element in length. The print should be even, without gaps. If the gaps still take place, then I advise you to turn the cartridge with a print head up and drip a green “Mr. Muscle” on them, wait for the moment the “muscle” is absorbed into the print head and try to make an imprint on the napkin again, if there is no result, then repeat the procedure repeatedly.

That’s all, the cartridge is filled, it remains only to glue the label back and install the cartridge in the printer.

Attention! If you use adhesive tape instead of label, you should not seal all the air channels completely, you need to leave at least a small part of the air track open otherwise, there may be problems with printing.

After installing the cartridge in the printer, if necessary, turn off the monitoring control control of the ink levels, print the dozen checking page and clean the print head.

With cartridges 0 and 0, the processing process is exactly the same, the only difference is that they have more sponge, accordingly, they will keep ink more.

CL-38, CL-41, CL-51 cartridge: since we already know how to refuel black cartridges for these printers and All-in-One Printer, it will not be difficult for us to refuel color cartridges CL-38, CL-41, CL- 51.

For cartridges PG-510, PG-512, PG-37, PG-40, PG-50, CL-511, CL-513, CL-38, CL-41 The following color scheme is relevant:

The location of the colors in the cartridges Canon CL-511, CL-513, CL-38, CL-41

Color diagram of cartridges PG-510, PG-512, PG-37, PG-40, PG-50, CL-511, CL-513, CL-38, CL-41

The only difference in the gas station is that you will have to fill in ink not in one camera, but in three different cameras of different colors of ink. Now the most important thing is not to confuse them. The figure shows where and what color to fill in ink. I also ask you to pay attention to the fact that ink would be poured in moderation, and they do not flow from all sides. We do everything exactly as for a black cartridge only for each color separately. Pour 4 into each camera 4. 6 ml. See that after refueling from below, ink does not flow from the print head.

The figure shows in which place to make holes for refueling the photo of the Canon cartridge and what ink to fill in which holes, we will not describe in more detail the refueling process since everything is described above.

PG-510, PG-512 cartridges: For new printer models, Canon came up with a new design, their refinements affected not only the appearance of the printers, but also the cartridges that use these printers. The figure shows cartridge 10 (PG-510), it differs in appearance from the PG-37 cartridge, but the processing process is exactly the same. PG-512 cartridge is equivalent to the PG-40 cartridge, it has a sponge more volume than PG-510.

How to tuck paint in Canon printer

Inkjet printers, despite some obsolescence, are still very popular. An important role in this is played by the opportunity to refuel cartridges on your own. Every time the paint ends, filling the cartridge with ink, and not buying a new one, you can save a lot of money. You can buy a bottle of ink, which is enough for a fairly long time. You can also save on printing photos. You can buy several bottles of colored ink and print the photos yourself.

The process of refueling cartridges will be considered on the example of the Canon printer. When you purchase ink for the printer, pay attention to whether there are printer models for which ink are designed, your model. You need to buy ink for your model, otherwise the printing of files will be incorrectly.

Turn on the computer. After the operating system is loaded, press the power button on the printer. Wait a few seconds while it starts. Then open the printer cover, after which the carriage with printing heads will begin to shift. Wait for it to stop. When the print head is in a static position, remove the cartridge from the nest. To do this, just pull it on yourself lightly.

In the place where you will refuel the cartridge, lay several newspapers so as not to stain anything. For this procedure, you will need a syringe and needle. Syringe capacity does not play a role. Type in a syringe about 5 ml. Ink. Take the cartridge from the print heads to you. Enter the needle in the print head. No need to introduce hard. The main thing is to press a little. Now, gradually, using a syringe, enter the ink into the cartridge.

If you refuel a colored cartridge, then, accordingly, you need to enter several ink colors there there. Each print head has its own color, according to which you need to introduce paint. After the cartridge is filled with ink, install it back in the compartment. To do this, just insert the cartridge into the connector and press a little until the click is heard. The sound of a click means that the cartridge is fixed. Close the printer cover.

Open the printer software and reset an ink level sensor. If this is not done, then the system will incorrectly display the remains of ink in the cartridge and will not be able to issue notifications about the low level of ink.

How to refuel Canon Printer

Sometimes it happens that our Canon printer suddenly stops typing or, we notice that although it prints, he does it with strange problems, and we see that our document after the press was somehow “transparent?

In such cases, you should either change the cartridge to a new one, or season it again, with a new ink. If you need to try to refuel the cartridge not in the service center, but yourself, then of course, in the end you can save money by about 70% cheaper than if you bought a new cartridge. In fact, every self.respecting company that is engaged in the production of printers should only be created cartridges that are designed for specific printer models. Canon’s desire to facilitate the work of those users who want to refuel cartridges at home. The last printers are made in such a way that it is enough to change the inkwell, or the inkwell and the printer head, and this is not any particular complexity. If nothing came out after these steps, it means that it’s time to update your printer and go buy a new one, as it turns out that the old one is already spoiled.

The Canon printer has a special sponge to hold the ink, and thanks to this convenience there is no need to make the complete tightness of the cartridge. There are several types of printers, and each of them needs to be filled in different ways, depending on the functionality and structure of the printer. After buying a printer, its cartridges will be enough for 20-30 A4 A4-color printing sheets, then the paint will end and you have to either buy new cartridges or refill the old ones. Two cartridges are used in color printers of the Canon MP210 type: color and black. The color cartridge costs like a 1/3 part of the total printer, so refueling it is much cheaper than buying a new. I will tell you how to fill in ink in Canon cartridge. But the same method is suitable for most similar cartridges.

How to refuel the Canon printer in jet yourself

Raise the printer cover to gain access to cartridges, the printer should be included in the network at this time. Cartridges are attached on a moving platform, so wait until this platform will take a place for servicing cartridges. On the printer there are stickers with English letters “b and“ c, in translation they mean: b. (Black) black. C. (color) color. Under these letters are cartridges, respectively, black and color. Pull a little down to yourself for protruding arches on the cartridge, and it will jump out. Insert the cartridge back very carefully, it should easily lathe in its former place. After extracting from the printer, remove the sticker from the top cover of the cartridge. Under the sticker on the black cartridge there will be a small recess in the form of a circle, and there will be three on the color of them. In the center of these circles, you need to drill holes with a diameter of about 1 millimeter. If there is no drill, then carefully do them with a knife or sharp cutter. Try to ensure that chips and other garbage do not get inside! How to refuel the printer Canon with black paint is already clear, but the colored cartridge has three holes and pour different colors into everything. The main thing is not to confuse colors, otherwise the cartridge will have to completely disassemble and rinse.

On my cartridge, I even scribbled where to pour a bunch of paint, and how to season the Canon printer. Upper hole. red ink, lower left. blue, lower right. yellow. Now a few words about the ink themselves. They are sold in syringes and banks, it is better to buy in banks, they are enough for a long time. For refueling, you will need medical syringes for 10 milliliters. For each color, use a separate syringe! In a black paint cartridge, you can safely pour up to 10 milliliters. When refueling, the needle needle should easily enter the hole of the cartridge, because air will come out of it. Insert the needle into the hole by 1 centimeter and start pouring the paint, do not be afraid to spoil anything inside, there is a sponge that absorbs the paint, you can even stick the needle a little into this sponge.

For a more clear presentation of a color cartridge device, I took a picture in a disassembled form. Inside the cartridge is divided into three compartments. Pour 3-4 milliliters of colored ink in each compartment. Always try to neatly refill cartridges, use napkins, ink are very caustic, they can hold out for several days on their hands, they will wash them from the fabric in general. Before filling colored ink, make sure that you are correcting them correctly, do not confuse colors, otherwise you will not be able to understand how to refuel ink in the Canon printer. If you confuse the ink, then either buy a new cartridge, or disassemble it and rinse it in distilled water. After the process of replacing the ink in the Canon cartridge end, always seal the holes with tape or sticky tape. Before returning the cartridge to the printer, wipe the dry nozzle with a dry cloth, from which a couple of drops of paint can leak out (in the photo of the nozzle from above), do not crush much! Also try to never touch the electrical contacts on the cartridge wall! That’s all, use cartridges and printer carefully, follow the cleanliness!

How to refuel toner Canon

The main profit to manufacturers of Canon printers, however, as other manufacturers of such office equipment, they bring sales not by the printers themselves, but by cartridges to them. over, sometimes for Canon cartridges reach 40% of the cost of basic printer models. What to do if you are forced to print a lot? There is a way out of this situation. You can try to refuel the cartridge yourself.

Prepare for refueling cartridzhazdaing a large package or newspaper so as not to stain the surface of the table. Dress old clothes that will not sorry to stain with toner.

Put the Canon cartridge on the table with a photo bank up so that four cartridge clips are directed at you.

Pend each of the four plastic latches alternately, helping yourself with a flat screwdriver. Start with medium clips. Insert a screwdriver under the latch. Click on the latch with your finger, pushing it forward. Turn the screwdriver at the same time and unfasten the clip. Try to do it carefully so as not to break the latches.

Find one more clip located next to the stirrer drive and, using the screwdriver as a lever, slightly lift the upper half of the cartridge.

Find the latch on the end of the cartridge where the plastic tank of the drum is located, insert a screwdriver under the clip and turn a little. At the same time, try to disconnect the halves of the cartridge with your fingers.

Divide the cartridge into two parts. Take the upper half of the cartridge. Roll a piece of paper and stick it between a magnetic shaft and a cleaning knife. Take the magnetic shaft and carefully inspect. If it has ring stripes. Clean it again with the help of paper.

Take the lower half of the cartridge and pull out the charge roller without pulling the skull of the video. Put the drum curtain and turn the cartridge sharply. Tap a screwdriver on top of it so that the whole development is spilled out.

Take a rag and carefully wipe the place under the charge of the charge and the toner hopper. If possible, use a vacuum cleaner to clean the cartridge.

Insert the charge video. In this case, it is recommended to first insert the side with a metallic contact, so as not to accidentally bend the contact.

Combine the halves of the cartridge. Sharply click on the cartridge simultaneously on the right and left side and snap it.

How to refuel Canon inkwell

PC users who have a full set of peripheral devices, including the printer, sooner or later faced that the paint in the original cartridges ends. What to do next, because, as a rule, buying new cartridges for Canon printers is expensive? Yes, and if you have forbid and buy these cartridges, then with active printing there will be enough of them for a short time. In this regard, the question arises: “Or you can refuel the canon ink on your own?””.

Spread a newspaper folded in several layers, lay a napkin from a gas station on top of it. this is the protection table in the case of ink.

From the set, take out a bottle with ink of the desired color and a syringe with a needle. Also prepare an elastic band-amor, thanks to which the inkwell will stand straight, and a special cardboard strip for closing holes of a different color on the inkwell (it is needed if a multi-color ink is refuel).

Remove the ink from the printer and install it so that the output holes are located at the upper part. For the stability of the inkwell, put an elastic band under it. Cover with a cardboard strip of the inkwell section, which will not yet refuel.

Open the bottle of paint and type two milliliters of paint from it with a syringe (if you refuel in an inkwell with black paint, then type four milliliters). Please note that ink should enter the syringe without air plugs, so move the piston of the syringe smoothly.

In one hand holding a syringe filled with paint, and holding the inkwell with the other, perform it refueling. To do this, place the needle of the syringe above the hole (however, it should not touch the hole itself) and slowly bury the ink. Before dripping the next drop of paint, make sure that the previous drop was completely absorbed. After half the ink is introduced, take a break for a minute for a minute, leaving the inkwell on the table in a horizontal position. Then continue to refuel the inkwell, and wipe the remaining paint with a napkin.

Wash with water a syringe and a needle used from paint residues. Then dial the next color and do a similar procedure. So refill until you fill the inkwells with the desired paint.

Gently take the refueling inkwell (do not squeeze it) and install it in the printer. Then print the test pages.

How to act after refueling

If the seasoned cartridge is perceived by the printer as empty, make a 15-20-second click on the button on the equipment housing. The button can have a red triangle icon and subscribe Cancel or Stop.

Notifications about the absence of paint will disappear, and the printer continue to print. It is necessary to zero in this way as many times as there are cartridges (in our case 2). Only after that the seal will resume completely and notifications will cease to come. Knocking is carried out only after the first refueling.

• Pigment ink InkTec C5050-100MB-1 bank (100 ml);
• InkTec C5051. 3 pcs 100 ml;
• cartridge holder for comfortable refueling and cleaning. 2 pcs.;
• A syringe with a needle for refueling through a standard hole. 4 pcs. (10 ml each);
• syringe. 4 pcs. (1 ml);
• medium.sized gloves. 2 pairs;
• Instructions with illustrations. 1 pc.

Additionally, you can buy a special stand for refueling, then you do not need to cover the table with paper and newspapers.