How to record music from a computer to a cassette. Use Sound Recorder on your PC with Windows

Effective ways of transferring and recording cassettes

For most music lovers of the 80s and 90s, the audio cassette was a dominant musical format that provides us with an affordable musical environment for the distribution and recording of songs. Many people, I think, still store various cassettes for precious memory. However, at present, people prefer to listen to music from portable iPod, iPhone or other MP3 players, and not with uncomfortable cassette tape recorders or outdated player.

Your collection of audio cassettes can be of great importance. The question arises: how to save and transfer audio content from a cassette to a computer for better savings? In fact, why not rely on an authoritative cassette tape recorder for recording a cassette in MP3 or other audio formats so you can enjoy the audio content on PC with Windows / Mac or a portable device. Which cassette tape recorder is best suited for capture and conversion of audio cassettes into a computer without loss of quality? You can study this article and find the best answer.

Collect the necessary equipment before recording on the cassette

A computer with an accessible sound card. Check the computer and make sure that your sound card has an affordable Line in (usually blue) nest and recent versions of drivers.

Cassette deck. Apply a tape recorder to play your cassette. The audio source should have at least the RCA Line Out nests or the Stereo-Mini-Radiolers for headphones. Clean the audio drive and a clamping video. Remove the residual moisture by rewinding the cassette forward and backward, and guarantee smooth reproduction.

Audio cables. One end of your cable should be stereo-mini. With the connector that you use on the audio source, the other end should be either RCA or stereo-mini. To achieve the best results, use a cable with gilded nests.

How to record an audio cassette on a computer

If you have saved tape cassettes with a recording of your own children’s voice, do not let them disappear. Rewrite them to the computer, and you will save these sounds forever not only for yourself, but also for descendants.

Buy any cassette tape recorder. In some electronics stores, tape recorders are sold today to lose audio cassettes. If you do not find such a device on sale, contact Internet ages. When purchasing a tape recorder or tape recorder there, make sure that the device is working. Cassette player is also suitable.

Keep in mind that most sound cards are equipped only with monophonic microphone inputs, so the stereononic tape recorder will not give an additional winner. To connect to the sound card, use a monophonic 3.5-mm plug or a stereo, in which the contact of the right channel is connected to the total. This plug can in no case be included in other sound card nests. To connect to the tape recorder, depending on its design, use either a stereo-chronic 3.5-mm plug, which interconnect the contacts of the left and right channels, or a din type plug, which has a medium-sized, and to remove general contact, and to remove signal. either both right or left pins (depending on the year of release of the tape recorder) connected together. Connect the total wires of the computer and tape recorder directly, and apply the signal itself through a non.polar capacitor to 0.2 μF. Perhaps the release of the tape recorder will have to be made in order to avoid distortion by a resistor for 1 kOhm. Connecting with de.energized equipment.

Run the Miksher Program on the computer (its name depends on the OS). Turn on the microphone input and adjust its sensitivity. Keep in mind that if the tape recorder is equipped with not a DIN connector, but a modern 3.5 mm connector, the loudspeaker will be turned off when connecting the plug, and the volume control of the tape recorder itself will additionally affect the signal level. If the tape recorder has a DIN type connector, the speaker does not turn off, and the level of the output signal is constant.

If there is no Audacy program on the computer, download and install it. Launch playback on the tape recorder, and on the computer. Record. When the rewriting is completed, export the result to the usual mp3 format.

How to record music from a computer to a cassette

How and where you can record songs on audio cassettes?I have an audio radio tape recorder in my car. Maybe someone has cassettes that can give or sell. Thanks in advance.8 (926) 310-45-55

Max, I also have more than 500 Japanese cassettes with records and without. I can record qualitatively anything you want.

In any recording studio, even a semi.basement is a good Japanese. We write with the guys toko on the caskets. We still do not play so well that this nightmare is digging. But at the expense of how to write down at home? Well, there is a familiar kulibin, he rebooted in his tape recorder, led out from his ears so that directly to the receiver of computer columns to connect a mazh and write.It’s not so difficult. The internet has many thematic articles on the direct signal recording from the computer to the tape.

Can. To do this, you need to connect to muses. the center with a cassette of some DVD player, turn on the player that reproduces sounds with DVD through muses.center, and while the music sounds on DVD, insert a cassette and record sounds with DVD.

Max, new (in packaging) audio cassettes, including collectible. Vinil’s entry on any medium. Sale of vintage equipment and apparatuses of the High End class, accessories for them. Possible repair and maintenance of equipment.

I have all sound sources in stock.Cool equipment (REK).TASCAM, Denon, Sony, Yamaha.There was a desire to take an analog apparatus.In the vastness, he took from the collection in perfect condition the Deco Pioneer 6.From the torrent took Flac (CD) I met all the cream of a worthy pop genre.Made a master.disk.Brought all tracks to the general level and dynamics.And made a copy on the type 3 tape.Fe-Cr.Pre.calibrated Super Auto Ble HD.comrades were simply surprised by the quality of the recorded material!In pauses, there is absolutely no working tape noise.And the sound turned out to be so transparent and pleasantly perceived by my old hearing aid.Conclusion.Analogue to take place in the modern world of sound.George (pensioner).Own workshop studio!

How to record music from a computer to a cassette

Depends on the expected quality and the possibility/impossibility of refinement. The linear entrance to the device is apparently not. Therefore, either option 1. Pornographic, but without surgery in general. We buy FM transmitter, broadcast on an empty FM frequency, write from radio to the cassette. But this must be borne in mind that the signal will be distorted by passing through the FM tractor, etc. That is, far from genuine. However, the device itself is initially clearly the quality of the record has far from professional cassette deeds, purely everyday. So maybe a lot and you will not lose.

Option 2. Refinement-post-outs inside according to the scheme where the linear signal walks, we are wearing it with a wire with Jack 3.5, write directly with PC. BUT. The device is just beautiful very, not the most frequent, I would not recommend it for such a recording to duck it.

The best option seems to me just find another device, which can already be recorded in a linear entrance.

Ill, this is a sound output and not the entrance) recording in the opposite direction (from PC to the cassette). Through access to the headphones is impossible.

Evgenij, I read somewhere that, through a double jack, and the entrance for headphones and microphones can be recorded, such as you include music on the PC and put the cassette in the tape recorder, thereby including the recording on it

Ill, in addition to the FM transmitter, I still remembered there is such a device. Adapter cassette. It is inexpensive. If the initial goal is directly written with this device with PC sound. then insert the adapter into the first decree, write the second. as if from cassett to the cassette. But in general, all this is not very serious 🙂 It is better to find a device under a recording with a line input)

Evgenij, I also use it similar in my Zhiguli, but at Aliexpress they are more often found with mono-heads, be careful when buying

Vladimir, well, if 1) write a music style of such as Eurodens and so on (initially completely electronic) and 2) source are good. That is why not? And so in general yes. There is some flaw in this process, it is better when the recording is certainly original, without such schemes. But there are all kinds of tasks 🙂

Vladimir, Roman, “Subtry, like a dog, a look, like an eagle”??)) Audiophiles lifted with your snobbery)) You listen only to TechDas Air Force One Premium and the layers of the first press? Other below your dignity?

Vladimir, why will it be the quality of shit if you write with hires? Your vinyl is also printed from the number. Dire Straits album. Brothers in Arms was recorded completely on the number. So what? Then replicated on cassettes, discs and vinyl. The quality has suffered?

How to record music from a tape recorder to a computer

Many have music or other material on audio cassettes, which must be translated into a modern digital format. For example, I would like to listen to a rare album of the old group on its MP3 player, and on the disks it was not published. If you still have something to reproduce the film, then writing music from a tape recorder to a computer will not be at all difficult.

Prepare an audio cable type “minijack-minijack”, that is, such as the headphones for the player or computer. You can buy it in any computer technique store and it costs inexpensively.

Connect the cable in the headphone jack on the tape recorder on one side. Connect the other end of the cable to the linear entrance of the computer sound card. Most often it is a connector on the rear wall of PC, marked in blue. This rule applies to both built.in and external sound cards, so just connect the cable to the blue nest.

Launch the built.in sound recording program. In all versions of the Windows operating system there is an application through which you can record sound, including music from a tape recorder to a computer. Press the Start button and dial in the lower line, which indicates “Find programs and files”, the word “sound recording”. A link to the desired program will appear in the top line. Press the left mouse button at this link and you will see the sound module window. This applies to users of modern Windows 7 and Vista operating systems.

If you use Windows XP, actions will be different. Click the Start button, then the “All Programs” menu and select the “Standard” submenu. Pull the mouse pointer to the “Entertainment” program and click the “Sound Recording” item with the left button. In any case, you will receive a window to make sound, with a signal viewing window and a button to start recording.

Press the playback button on your tape recorder or music center. In the window of the recording module, you will see that the signal is received and ready to record. Click the button with a red circle to start recording. Press the same button again to stop the sound recording procedure. A window with a proposal to save changes in the sound file will open. Press the yes button and set the name to save the file, then press the “Save” button. You can process and improve the resulting file in any program with sound.

You can use the GRACE TAPE2USB device. Having bought this miracle of technology, you will receive a cassette player that connects to a USB-cable computer. Insert the cassette, connect with the computer, install the Audacy program to work with sound (it includes) and click Play on the device panel. This is a very simple and convenient tool to record music from a tape recorder to a computer, but it costs about 100.

How to rewrite an audio cassette to a computer

Our experienced team of editors and researchers who checked it for accuracy and completeness participated in the creation of this article.

Wikihow content managers team carefully monitors the work of editors to guarantee compliance with each article with our high quality standards.

The number of sources used in this article: 10. You will find their list at the bottom of the page.

The number of views of this article: 104 128.

From this article you will learn how to postpone an audio recording from a cassette tape recorder (deck) to a computer running Windows or MacOS. After you connect the tape recorder to the microphone (or linear) input of the computer via the corresponding cable, use the Audacy (Windows) or QuickTime (Mac) program to record audio from cassettes.

Study the cassette posting procedure. To record an audio cassette on a computer, you need to connect a cassette tape recorder to a microphone (or linear) input of the computer, and then configure the computer to record only a linear audio signal. This will not allow the computer to record extraneous sounds (for example, background noise), allowing you to get a pure high.quality record of the cassette. [1] X Source of Information

• Almost all cassette tape recorders have 3.5 mm headphones, so to connect it to the computer, it will be enough to find a standard 3.5 mm cable.
• Some cassette decks have unbalanced linear outputs. They can be recognized by red and white ports. For them you will need a RCA-3.5 mm cable.
• Dear cassette tape recorders can have balanced linear outputs with two 3-pin XLR-F connectors or balanced 1/4 “telephone nests. For them you will need to buy an adapter that is suitable for both a 3.5 mm computer connector and the outputs of a tape recorder.
• On desktop computers, this nest can usually be found on the rear or front panel of the computer.
• In laptops, a mono entrance and output are usually installed. Therefore, although this is a nest and can be used to transmit sound from a tape recorder, it cannot be recorded in stereo mode.
• 3.5 mm.connect one 3.5 mm end (no matter what) the cable to the 3.5 mm line of the linear exit (not for headphones) of the cassette deck.
• Unbalanced. Connect the red RCA cable to the red connector, and the RCA white cable to the white connector.
• Balanced. Connect the cables XLR or 1/4 “to the corresponding connectors on the tape recorder.
• Linear entrance on computers with separate ports for microphone and headphones is usually marked with pink color.
• If you use an adapter, connect a 3.5 mm cable to a free connector on it.

Make sure all the cables are sitting tightly in the nests. Loosely sitting cables can lead to a decrease in quality during the recording process, so make sure that the cables are securely fixed both on the side of the computer and on the side of the cassette deck. When you configure all the connections, you can proceed with the audio record from the tape recorder.

• Go to the following address in the browser: https: // www.AudaticityTeam.org/Download/.
• Click on Audacy for Windows.
• Click on a link for loading the installer Audacy X.X.X (where x is the current version of the program).
• Double.click on the uploaded file of the installer.
• Follow installation instructions.

How to rewrite an audio cassette to a computer

Our experienced team of editors and researchers who checked it for accuracy and completeness participated in the creation of this article.

Wikihow content managers team carefully monitors the work of editors to guarantee compliance with each article with our high quality standards.

The number of sources used in this article: 10. You will find their list at the bottom of the page.

The number of views of this article: 104 128.

From this article you will learn how to postpone an audio recording from a cassette tape recorder (deck) to a computer running Windows or MacOS. After you connect the tape recorder to the microphone (or linear) input of the computer via the corresponding cable, use the Audacy (Windows) or QuickTime (Mac) program to record audio from cassettes.

Study the cassette posting procedure. To record an audio cassette on a computer, you need to connect a cassette tape recorder to a microphone (or linear) input of the computer, and then configure the computer to record only a linear audio signal. This will not allow the computer to record extraneous sounds (for example, background noise), allowing you to get a pure high.quality record of the cassette. [1] X Source of Information

• Almost all cassette tape recorders have 3.5 mm headphones, so to connect it to the computer, it will be enough to find a standard 3.5 mm cable.
• Some cassette decks have unbalanced linear outputs. They can be recognized by red and white ports. For them you will need a RCA-3.5 mm cable.
• Dear cassette tape recorders can have balanced linear outputs with two 3-pin XLR-F connectors or balanced 1/4 “telephone nests. For them you will need to buy an adapter that is suitable for both a 3.5 mm computer connector and the outputs of a tape recorder.
• On desktop computers, this nest can usually be found on the rear or front panel of the computer.
• In laptops, a mono entrance and output are usually installed. Therefore, although this is a nest and can be used to transmit sound from a tape recorder, it cannot be recorded in stereo mode.

• 3.5 mm.connect one 3.5 mm end (no matter what) the cable to the 3.5 mm line of the linear exit (not for headphones) of the cassette deck.
• Unbalanced. Connect the red RCA cable to the red connector, and the RCA white cable to the white connector.
• Balanced. Connect the cables XLR or 1/4 “to the corresponding connectors on the tape recorder.
• Linear entrance on computers with separate ports for microphone and headphones is usually marked with pink color.
• If you use an adapter, connect a 3.5 mm cable to a free connector on it.

Make sure all the cables are sitting tightly in the nests. Loosely sitting cables can lead to a decrease in quality during the recording process, so make sure that the cables are securely fixed both on the side of the computer and on the side of the cassette deck. When you configure all the connections, you can proceed with the audio record from the tape recorder.

• Go to the following address in the browser: https: // www.AudaticityTeam.org/Download/.
• Click on Audacy for Windows.
• Click on a link for loading the installer Audacy X.X.X (where x is the current version of the program).
• Double.click on the uploaded file of the installer.
• Follow installation instructions.

How to rewrite from audio cassettes to a computer

Records on an audio cassette can be transmitted from a tape recorder to a computer. To do this, use the stereo cable with a mini-separation and a program for audio recordings, for example, Plus! Analog Recorder or Audacy.

Connect one end of the cable stereo into the headphone jack on the cassette tape recorder, and the other into the microphone connector on the computer. Insert the audio cassette into the tape recorder.

Open the Plus program! ANALOG RECORDER. Press the Next button (“Next”) when a greeting page appears on the screen. After detecting sound devices, press the Next button again.

Go to the Record Your Music (“Music Recording”) Plus program! ANALOG RECORDER. Click the Record button (“Record”), and then click the playback button on the cassette tape recorder. Press the Stop button (“Stop”) at the end of the recording.

Go to the Review and Name Your Tracks page. Enter the name of the composition and name of the Contractor. Then press the Next button (“Next”).

Go to the Save Music Tracks to this Location (“Save music tracks in this place”). Select any of the options that you want to apply to the audio file. Press the Next button to save the sound track.

In order to rewrite music from audio cassettes to a computer using the Audacy program, download and install it. Double.click the Audacy icon on the desktop to open the program.

Click the Record button (“Record”) (icon with a red point) in Audaticity. Then click the playback button on a cassette tape recorder. Wait for the audio cassette to finish to the end. Press the Stop button (“Stop”) (icon with a yellow square) in Audacy to stop the recording. Press the stop button on a cassette tape recorder.

In the “File” menu, select Export as MP3 (“Export to MP3”). Enter the name for the audio file, and then click the Save button (“save”) to complete the transmission process.

What is better to record music for audio cassettes?

Vinily is very cool, simply unimaginably, but for a student, it’s expensive. And here I recall audio cassettes, of course the sound is not like that, but the romance of the oldest times climbs from these magnetic ribbons. And here is my question, what model of the cassette deck can be taken and it is desirable that it would be vintage, at least to constantly buy spare parts and go to the elderly with a miracle of hands, I do not want.

You can’t buy a good cassette deck for a cheap, although if it is needed only for “type, it’s cool”, then you can buy a cassette for 1000 rubles. from newlyweds from the secondary market. But, again, the question arises here that you will listen to it and where to get pure cassettes, and they cost decent money good quality? And then, rewrite records from pirate copies to these cassettes MR3? There is no sense in this!

The only way to maintain the authenticity of the analogue sound on the cassette decrees is to make a record from the vinyl records of the release of 70-80 years, even before the digital era of sound recording. But, for this you need a good vinyl player and phono.corrector. And in this situation of cassette will be the fifth wheel in the system, t.to. The sound will be much better if you listen directly to Vinil.

and what does it mean not to buy cheap good decau?yes, of course, the dragon is not to buy cheaply.But for example, for 15 thousand you can buy a good two.toned decree.And even cheaper.

I’m afraid this will not work, but rather vice versa. Cassette decks in terms of design, mechanics are more complicated than even a very serious CD drive. And age will make itself felt in any case. This is the first moment. Further: the demand for good decks, both domestic and professional, for more than a year is very high and the price tag is usually impressive. As well as the price of good cassettes. Therefore, everything in general will come out very not cheap. for good decks, such as Nakamichi, Aiwa, Sony, Teac can easily vary within 500-1500 excluding delivery. And delivery will also cost, as the news of good decks can be 10 and 15 kg.

We go further, there is an interesting segment, such as professional portable cassette. But again, Sony WM-D6 (not the best option), or TC-D5 (this is already more interesting) in working condition can easily cost the same 500. Just portable cassette players of good class today also in price, 200-300. easily.

And the cassettes, if decent, will also cost up at all conditionally.

I sell two.tonval thera 5000 for 12 thousand. Denon 800 for 12 thousand. Very good deck for little money.There is almost new 610 pioneer for 22 thousand.In the box and with manual.

By price. everything is relative. Will join the cassettes even allow the device for 2-3t.R Technics RS-TR 474. But the cassettes themselves. The topic is separate. I buy new ones for this decree in stores for 30-50r. and quite satisfactory (given the price). And to rewrite vinyl, I already use old stocks for chromium.

Now two-tonval decks with manual calibration can be found for 10-12 thousand.What is the meaning in technician 474 or even 575.Who needs a two.cassericial with an accelerated entry?The whole meaning of the deck is lost.

especially 575 where both decks are writing. In general, the technician did not really write. Sonya is better, not to mention the pioneer

Technics 575 Beautiful and very reliable devices.In general, all video pirates and audiopirates made their business on Matsushita products.Pioneers and Jress Merli like flies.Sonya too.

Yes, if you write. then on the coils. But it is even more expensive. Although the topic with copies with master-tuning and entries with rare primresses is now in demand. The truth is here again everything rests on the technique and the original records themselves.

I think for romance or in my case for nostalgia on the Internet you can find everything. It is clear that the vinyl or good sd loss is. The sound is mostly better, although some high.quality recordings on the cassettes sound better than individual disk sd, but it is not even the superiority of the carriers. Therefore, now I have in working condition AKAI GX-69, Onkyo Ta-RW255, Vega 120.122, note 220. The truth is not enough to listen or record, but I still get somewhere 1-2 days a month. So look for the spaciousness of int is better some kind of single.cassette, three.headed. without reverse, if you plan to record from high.quality carriers. And the cassettes are chrome. metal. If they do not represent a collection rarity, you can take 200-300 r in packaging.

Orel-101. Licked from some Japanese, head of the canon head. A little finalization you can bring the device to a new level of recording and playback. In Vegi 120-122, Hall sensors fly to “Hurray”. In 122 the design is abominated, and in 120 the processor can easily perish. 2nd class can not even be considered.

And vinyl. It’s not so expensive. A lot of good music on Vinil can be found with friends, acquaintances, neighbors who were music lover in their youth, and, as a rule, give records for free or for symbolic money. If you are not chasing a “company”, then everything is real. I have an overlap of 30 records, and I all cost dollars in 45. The player can also be taken by “ours”, 0 or 1st class. Mine cost me a modernization of 35, 45 on a new head. True, inexpensive?

And write to the cassettes where? With vinyl? So take out vinyl and turntable to write down. Then it is better to blame and listen. Digit? And the meaning?

Orel-101, worked long ago in good, according to the Councils of Office standards, the tract is 10 years old. Well, now, for 20 years it has been a box (something has broken). And there is no desire to nostalgia, the collection of cassettes (normal sleepers, records from vinyls and compacts at once) gave stupid things, but I do not regret it at all. I left a dozen beloved, and whether they are lying when I listen.

In general 1 to vinyl, and cheaper and more sincerity 🙂

Orel is complete guamno.I remember they wrote on them in the early 90s. If Made of the in the South Suveny, then Yauza 220.

I don’t know where this rumor came from about Yauza 220, I heard from a competent like a person. In fact, the car is frankly so.so, the sound is worse than the lighthouse 232, there are generic disadvantages of the cassette receiver (even in the journal Radio there was an article on how to fix it yourself). Deco does not know anything interesting, for example, how to look for pauses in Vega 120. I remember that in 1988, I bought veg 120, I stood a long line, I got it, on the way back with a purchase I saw Yauza 220 on the window. lies and no one takes. I think that says it all.

Yauza 220 The most reliable of all Soviet devices.There is Japanese mechanics.The only problem in it is the burning segments of the indicators.The decks of RAPR were made on the same mechanics. But there were very few of them.After 220 they did 221.There were constant problems with winding. And what’s the use of your veg, if it did not work onomol.Vega was generally very unreliable.and amplifiers and vinyls and deck.They had a good radio.Here she worked.