How to disassemble Samsung TV remote

Samsung

Dismantling the Samsung TV remote

To open the Samsung Smart TV Remote, turn it over and slide the back cover down towards the indicators.

If you slide the back of the puller towards the indicators, a small gap appears on the front of the remote control.

Open gap makes it easy to grip the back cover so you can remove it.

Removing the back cover reveals the battery compartment, which usually contains the necessary fasteners. A Phillips screwdriver will help you remove all the screws and unscrew the case. It is advisable to take a special jar or a small container for the screws so as not to lose them.

disassemble, samsung, remote

The rest of the remote is held by plastic clips, but it can be glued, pay attention to this point.

On the right side of the console, when facing up, there are two large areas for opening from the outside. These large clip opening areas are located on the right side of the console only. If the manufacturer did not use special glue, then you can carefully slide a plastic card around the perimeter of the device and pry off the case to start separating the case seam through the large clamping areas.

Once the case is open, you can see the top and the keyboard with a rubber membrane. Then disconnect the microcircuit, but it is not recommended to unscrew the sensor from it.

It is advisable to wipe the area from the remote keyboard with alcohol, like the keyboard, which will get rid of sticking buttons and pressing will become smoother.

To remove the PCB from the case, use a flat head screwdriver or knife to gently pry up the bottom of the PCB on both sides near the battery compartment area.

Close inspection reveals two small holes on the board. These holes are for the two MEMS microphones in the remote control.

The LED is also located next to one of the microphone holes.

The top of the remote housing has an acoustic spacer for the top microphone. The rubber membrane keypad is used as an acoustic pad for the bottom microphone.

Turning our attention to the back of the PCB, we can look at the components that make the console work. There are a number of discrete parts, transistors, and power supply integrated circuits. For example, a universal electronic remote control with voice control and Wi-Fi Direct UE878NMEG, consists of:

  • Wi-Fi chip, Knowles SiSonic microphone and infrared LED.
  • After cleaning and repair work, you can assemble the remote control, observing the reverse order.

HOW TO DISASSEMBLE A SAMSUNG TV REMOTE CONTROL

Features of disassembling the TV remote control

It should be noted right away that there are no significant differences when disassembling remotes from different brands, since they have a similar design. Often, remote control devices are distinguished from each other only by the size and location of the buttons.

Therefore, further we will consider the general principle of disassembling the remote control, which will suit most models. However, it is recommended to carry out only cleaning on your own, since repair requires certain knowledge regarding the functioning of microcircuits, which may differ in different devices.

  • small Phillips screwdriver;
  • knife or flat screwdriver;
  • a plastic card.

Possible malfunctions and their elimination

If the TV stops responding to the remote control, the first step is to check the connection to make sure which of the two devices is causing the problem.

  • First of all, you should check the connection of the equipment to the power source. If the TV plug is connected and the current is supplied to the outlet, but the TV does not turn on, check the wire itself, it so happens that the cable from the TV to the plug is frayed, bent, etc.
  • If both the plug and the cable are in order, and there is current in the outlet, and the TV does not want to turn on, then try to start it using the button, which is located on the body of the equipment itself. If the equipment does not respond, then it is worth sounding the alarm and checking the performance of the TV itself.
  • In the case when, when turned on with the button on the panel, the TV works as if nothing had happened, and does not want to respond to the remote control, then the question arises of why this happened. Most likely, in this case, the problem is specifically in the remote control.

The most common reasons for the breakdown of the remote control are

  • Mechanical damage Most often, it is found in families where there are small children who can drown the remote control in the bathroom, bucket. Or throw the remote control at the wall. In such a situation, only a complete replacement of the remote control can help, and it is recommended to remove the new one away from children.
  • Batteries. Typically, TV remote controls are powered by batteries that go into a separate compartment. And to restore the device’s performance, it will be enough to replace the batteries with new ones.
  • Scheme. The circuit can hide various breakdowns, including loose contacts and ending with more serious malfunctions. The most popular chip in use today is Adam24P20G.
  • Quartz remote control device.
  • Buttons. Sometimes there is a thinning of the special gasket between the buttons and the circuit.

Most of the problems can be noticed in the early stages, paying attention to the appearance of the device. For example, the body of the remote control may be melted or cracked, which already indicates possible problems that in the future can lead to a complete failure of the device. However, some breakdowns can still be eliminated if they are detected in time.

If you know the cause of the breakdown, the device can be reanimated if done on time.

Some malfunctions can be dealt with on your own. For example, if the power supply is insufficient, the batteries must be replaced. No soldering or disassembly required.

  • Remove the control panel cover;
  • Remove the batteries;
  • Insert new.

If there is a bad reaction of the buttons to pressing, you will have to check the integrity of the gasket located between the buttons and the microcircuit.

If there are any cracks on the case, it is recommended to replace the remote control with a new one, or use materials at hand to fix the case and prevent further cracking.

But not in all situations you can cope on your own and then you will need the help of a specialist.

How to properly disassemble Samsung TV remote

It often happens that the remote control stops working, sometimes insignificant reasons lead to this, for example, the buttons get stuck, in this case it is enough to disassemble the device and fix the problem.

Therefore, for every TV owner, it is important to know how to disassemble the Samsung TV remote control.

Connecting and configuring the remote control

After you have disassembled and reassembled the remote control, you will need to reconnect it to the TV.

After inserting the batteries, observing the polarity and closing the cover. Then find in the instructions how the first connection is made. Different models are activated by different keyboard shortcuts. But usually you need to set the play and return keys, holding until the corresponding icon appears on the screen.

This will mean that the devices have successfully connected with each other. For modern universal remotes, no special setting is required, it is important to know only the purpose of each button.

Owners of modern Samsung TVs with Smart Touch Control may find it difficult to get used to using the new system.

Disassembly Samsung Smart TV Remote Control

The remote control is equipped with a hydrosensor, and Smart TV can be controlled when it moves in space.

The body of such a device has few buttons, since its entire functional part is concentrated on the touchpad, which is located in the center.

So, for example, when you move your fingers, you navigate through the menu, and the touchpad on the panel can call the cursor.

You can select an item from the list by touching the touchpad. Some models have keyboard mappings to help speed up searches.

But even taking into account all the functionality of touch-sensitive remote controls, users prefer to use universal push-button analogs, because they are cheaper and more familiar to operate at a price.

What is a remote control?

One Remote Control. It’s a universal remote control, but it’s not a regular device. Remember when we just mentioned all those super devices, set-top boxes, Blu-ray players and game consoles that you can find at home these days? The problem is that these devices do not have a single standard method of remote communication. Infrared, Bluetooth and Wi-Fi signals are transmitted across your living room through various remote controls that independently control these peripherals. One Remote Control takes care of it all like a universal remote control with a difference. It’s small, of course, but it’s also a powerful and elegant solution to the problem of seamlessly controlling all these different devices connected to your quantum dot TV.

Connecting and configuring the remote control

After you have disassembled and reassembled the remote control, you will need to reconnect it to the TV.

After inserting the batteries, observing the polarity and closing the cover. Then find in the instructions how the first connection is made. Different models are activated by different keyboard shortcuts. But usually you need to set the play and return keys, holding until the corresponding icon appears on the screen.

This will mean that the devices have successfully connected with each other. For modern universal remotes, no special setting is required, it is important to know only the purpose of each button.

Owners of modern Samsung TVs with Smart Touch Control may find it difficult to get used to using the new system.

The remote control is equipped with a hydrosensor, and Smart TV can be controlled when it moves in space.

The body of such a device has few buttons, since its entire functional part is concentrated on the touchpad, which is located in the center.

So, for example, when you move your fingers, you navigate through the menu, and the touchpad on the panel can call the cursor.

You can select an item from the list by touching the touchpad. Some models have keyboard mappings to help speed up searches.

But even taking into account all the functionality of touch-sensitive remote controls, users prefer to use universal push-button analogs, because they are cheaper and more familiar to operate at a price.

From not very smart to really smart remote in 60 years

there are almost as many as televisions themselves. If you have relatives familiar with the leading television technology of the 1950s, they may just remember the first (but finicky) wired TV remotes that could trip your pets or kids. In addition, there were remotes that worked fine if you pointed them correctly at the sensor. Over time, more and more devices connected to the TV became more and more popular. Your grandparents may never have had the need or desire to connect a new device to their then “newfangled” TV, but you or one of your tech-savvy friends have probably connected at least one such device to the TV that you currently knew. After taking a few twists and turns on the road to television technology, we have a new standard: a single remote control and automatic detection. In short, One Remote Control and Auto Detection make it easy to watch your favorite shows on a Samsung Smart TV, and we’re confident that once you experience it yourself, you’ll wonder how you’ve ever lived without it.

First, what is automatic detection?

Televisions that can be found in most homes now have a variety of connected entertainment devices such as over-the-top devices, set-top boxes, Blu-ray players, and game consoles. Managing relationships can be tricky. But automatic detection makes it easier to find connected devices. Have you ever connected multiple HDMI devices to your TV just to not understand which device is on which HDMI channel? Are you familiar with scrolling through the TV / AV input selection menu when trying to locate your DVD player? Are you ready to give up? This is not necessary, as automatic detection solves these problems. It knows more about your different devices than you expect. When a device is connected through one of the HDMI ports of the Quantum Dot TV, the auto-detect function automatically finds it and displays the device name. No longer wondering which gaming device you have: HDMI1 or 2.

Samsung TV blog. QLED TV | Frame | Premium UHD TV

Reboot the TV

Turn off the power of the TV. Unplug the power cord carefully from the power outlet that connects to the TV. This will turn off the TV and reset any problems that could cause the remote control to malfunction. After 5 minutes, reconnect the TV’s power cord to the wall outlet. Check if you can turn the TV back on with the remote control. If the TV turns on, the problem is solved. If the TV remote does not turn on the TV, press the small power button on the TV itself to turn it back on. Try the TV remote again by checking the volume buttons. Does the volume of the TV change? If not see below

If this problem has just begun, make sure you have installed the batteries correctly in the remote control. Make sure that newly installed batteries are not depleted or discharged. Always use the same brand and type of batteries for better performance.

Replacing the remote control battery fixes the problem

Required tools

Simple tools will help you to disassemble the Samsung TV remote control. It should be remembered that such work is carried out in order to clean the device. If more complex problems arise at the microcircuit level, then you should contact a specialist. So, for disassembly you will need:

  • small Phillips screwdriver, for screws;
  • not a sharp knife.

These simple items will help you easily disassemble the remote control. You should also know that the remotes of modern technology, for example, such as LG or Sony, are not very different from each other, like Philips. The principle of connecting the elements is approximately the same, and the repair is limited only to cleaning the elements so that the buttons do not get stuck.

Useful Tips

Attention! Before starting the process, you need to watch video instructions on the Internet, on the topic “how to disassemble the Samsung Smart TV remote control”.

Nowadays, Samsung Smart TV remote control is an indispensable product. For a long time, Samsung has been producing remote controls to work with a large number of products. Some of them are universal and fit several types of devices. To buy such a device, you need to decide on a list of characteristics that you want to get for a certain cost. The more expensive the remote control, the better its performance.

Malfunctions and their elimination

If you purchased a device and it does not function, the first step is to follow these steps:

  • Read the instruction manual carefully;
  • Make sure the device is compatible with this TV model;
  • Disconnect the batteries and put them back;
  • Remove the power plug from the outlet, wait a couple of minutes, plug it back in and turn on the TV.

The disadvantage of Samsung Smart Touch remote control devices is that repairs are not carried out in official service centers. The cost of the original remote control sometimes reaches a third of the cost of the entire TV set. Therefore, most users try to repair the remote themselves. A common problem is the gradual increase in the rate of discharge of the batteries, and in the end, the remote does not work at all even with new batteries. This is facilitated by the malfunction of the capacitors at the positive input. To solve the problem, you can simply remove them, but this does not guarantee the safety of use, however, without them, the remote control will begin to function normally.

How to disassemble

To clean the remote control, or fix the parts that have come off, it is necessary to be able to properly disassemble and assemble it. For this you need:

  • we find small screws in the case, we twist them with a small Phillips screwdriver;
  • since the sashes are most likely glued together, you need to act carefully and without haste;
  • the glued gap is cut with a knife so as not to damage anything, after that we remove the cover;
  • after removing the cover, unscrew the microcircuit, thus, the entire device is disassembled.

So you can disassemble the Samsung remote control in a short time. It does not require much effort and cost, now it is open for home renovation. For us, this is an important component of further repair.

Remote control settings

Samsung Smart Controls are touch-sensitive devices that allow you to control TVs from a distance. They are bundled with Samsung TVs that have the Smart TV function and were released after 2012. He is able to control not only the TV, but also the set-top box that is connected to it. It can also be used as a Blue-Ray player control device. It has a voice control function with which you can increase or decrease the sound and perform other actions without touching the remote control.

This remote has a touchpad

The main advantage of this remote control is the touch-sensitive touchpad located on the front side and occupying 40% of the area. It allows you to easily configure the TV, comfortably navigate the TV menu and in the browser. Touch panel provides maximum comfort and ease of operation.

Repairs

The remote control is actually very fragile, and only people who have experience in repairing various microcircuits need to repair it. The first step is to determine if your model of device can be repaired at all. The phone camera can help you determine if an infrared signal is being emitted from the remote control. If there is no such signal, then the device does not function and it is necessary to replace it or repair it.

Attention! Only a person who has experience in the field of electronics can restore the functionality of the old remote control on his own. If you do not understand this type of technique, then it is better to contact a specialist!

In most cases, the problem is that various keys on the remote control stick or partially do not work. This can be caused by a malfunction of the graphite deposition, which performs the function of a conductor. To restore performance, you must perform the following steps:

  • Parse the remote control according to the instructions;
  • Cut the aluminum foil into small square pieces;
  • Then you need to stick these pieces to the contact surface;
  • Assemble the remote control in the reverse order.

Remote Control for Samsung TV

The remote control plays a very important role in watching TV. With its help, all operations are carried out: setting channels, image and sound, enabling various functions and many others. The TV can be controlled using the original remote control, or a universal device.

In this article, you will learn how to disassemble the remote.

Connection

Synchronizing the universal control panel is easy enough. Each manufacturer provides instructions for such remote controls, which must be read before connecting the device. This type of remote control is used by people who do not like standard devices. The user chooses a universal device independently, depending on the preferences of the appearance, price and functional equipment. Instructions on how to bind the remote control to the TV are supplied with the device itself.

How to disassemble the remote

Experienced craftsmen advise not to carry out repair work to people who have not previously had experience in repairing microcircuits. In such cases, it is easier to contact a service center, where they will carry out a high-quality repair of equipment for a fee. If you start repairing the remote control yourself and spoil it, the cost of buying a new product can be much more expensive than repairing it at a service center.

First you need to look at the instructions on the Internet on how to disassemble the Samsung TV remote control. To disassemble the remote control, you need a small curly screwdriver and a plastic card. First of all, you need to inspect the body for the presence of bolts. Most often they are located in the battery compartment. Since they are small in size, you can unscrew them with a small screwdriver. In order to get to the remote control microcircuit, you need to gently press on the surface of the case, and hold the plastic card between the two main parts of the remote control. Be careful not to damage the edges of the remote control.

REPAIRING A SAMSUNG TV REMOTE CONTROL(complementary)Cómo reparar el control remoto de Samsung

After you have removed the front panel with buttons, you need to disconnect the spring located in the battery compartment. After that, you can inspect the microcircuit. If this part is burned out, then it is necessary to purchase a new remote control, and not a separate microcircuit. Also, the masters do not advise to disconnect the sensors from the microcircuit.

There is a variant of remote controls, which are fixed using special glue. If it is present, but the analysis needs to be done very carefully. This type of remote control can be opened with a flat screwdriver or a mild kitchen knife. We install the remote control in a horizontal position and, using the selected tool, which is inserted between the two main parts of the remote control, we produce ajar cases. This procedure must be carried out around the perimeter of the entire building. After you have opened the remote control and fixed the malfunction, you must also use special glue to close the remote control. Important! It is necessary to apply the glue evenly, since small gaps can cause dust and moisture to enter the device, which in the future may affect its performance.

To repair the touchscreen remote control, you must use an appropriately sized screwdriver. You also need to disconnect the touch sensor located below the keyboard. Dismantling of the screen is carried out with increased accuracy in order to avoid damage to the connecting cables. However, manufacturers and craftsmen strongly advise, if a remote control of this type fails, contact specialized service centers.

On the phone

Samsung TVs from the N, M, Q, LS, K, J and F series are equipped with Screen Mirroring. It allows you to establish a connection between your phone and your TV. This function provides mirroring of the smartphone screen to the TV, and also makes it possible to control some TV functions using a mobile phone.

Settings

Regular push-button remote controls that come with Samsung TV do not require any special setup. The instruction for operating the buttons is attached along with other documents to the TV. Since 2012, TVs have been equipped with Samsung Smart Controls. It provides control of the TV, as well as the set-top boxes that are connected to it. This remote control is also equipped with a voice control system and automatic locking. You should be attentive to the last function and immediately read the instructions on how to unlock the Samsung TV remote control.

When you turn on the TV for the first time, the Samsung TV should be paired and configured automatically. Please note that the device needs to be charged. If there is no automatic connection, you need to hold down the two buttons located to the right and left of the “Play” button for 3 seconds. Then follow the application in the book and configure the TV.

Universal remote controls require special setup. When buying a device of this type, the seller must give you an application for connecting the remote control. There are a large number of universal devices for controlling TV, as a result, there are also many ways to set up the connection. We’ll look at two main options.

The first method is available if the keys of the main TV manufacturers are present on the remote control. You need to select the “Samsung” key and the remote control should quickly connect to the TV. It should be noted that it is necessary to turn off extraneous digital devices located near the TV in order to avoid any interference. At the moment of pressing the button with the TV brand, it is necessary that the TV is turned on, and the remote control is directed to the front panel of the screen. You must hold down this key for several minutes until some action occurs on the TV screen.

Second way. You can set up the connection by following the instructions for the remote control, which should be in the box of the device. On it you will find a large number of numbers. these are codes. They are required to pair the remote control with the TV. To start tuning, install the batteries in a special compartment of the device and press any keys. The indicator light located at the top will give certain signals when you press the keys. After that, find in the instructions the necessary numbers corresponding to the firm of your TV. The next step is to point the remote control at the TV and long press the power key. After a while, the lamp should light up, after which you should enter the digital value of the corresponding code. After that, the remote control should be paired.

How to choose a remote control for your Samsung TV

There are several options for selecting a remote control for Samsung TV:

In this video, you will learn more about this remote control:

Cleaning

To completely clean the remote control from dust, it is required to remove the buttons from the front panel, which is carried out by pressing the buttons on the push side. Cleaning must be done to avoid sticky keys in the future. The instruments for this operation are wipes and alcohol.

These numbers are necessary for pairing and setting up universal remote controls with various devices. DVD players and TVs. Each brand and each type of device corresponds to a certain digital combination, which is indicated in the instruction manual of the remote control.