How to connect av cable to TV

How to connect an HDMI cable to a TV

If you are looking to purchase or have already purchased an HD TV, then you will certainly be faced with the need to choose an HDMI cable. How to connect an HDMI cable to a TV is an interesting question, but first you need to purchase a cable. This is not a very complicated procedure, but you must first familiarize yourself with some of its nuances.

Brief specifications of the HDMI cable

Before connecting an HDMI cable to your TV, it is important to understand their basic characteristics. HDMI is a high definition multimedia interface. There are two types of HDMI cables: HDMI Standard and HDMI High Speed. Using HDMI Standart cables, television receivers of all categories are connected: cable, terrestrial, satellite, including 3D, as well as ordinary non (3D) Blue-Ray players and most HD camcorders. Cables in this category may have different markings, except for High Speed. Game consoles, computers, Blue-Ray 3D players. Game consoles, computers, Blue-Ray 3D players are advisable, but not necessary to connect with a High Speed ​​cable.

One of the main subtleties of choosing a cable is the requirement for its length, which should not exceed 5m, otherwise the image quality may deteriorate sharply. Also, the cable must not be bent. Before purchasing a cable, you need to decide what connectors are on your device. Relatively old models of TVs and other equipment usually have two types of connectors. RCA (otherwise called “tulip”, triple wiring cable) and S-video, a round output with 4 or 9 pins. Newer device models are equipped with an HDMI interface.

To connect the most efficient connection, you need to purchase a cable that, on the one hand, has a connector on the device’s panel, and on the other hand, HDMI. Finding such a cable is quite problematic, and if this fails, you need to use adapters, which can have two or more connectors of different types.

Process for connecting HDMI cable to TV

How to connect HDMI cable to TV? The TV must be turned off before connecting the cable. If the TV device has S-video, then the cable is connected with the S-video connector to the TV, and HDMI to the computer.

It is undesirable to connect an HDMI TV to the DVI connector of a computer. Such a connection will result in a significant reduction in picture and audio quality.

After connecting the TV and computer with an HDMI cable, the TV turns on first, and then the computer. When the operating system is loaded onto the computer, the TV screen flashes, indicating that it is connected to an external source. The TV must be switched to AVI mode, in which the signal will come to it not from an external antenna, but from a computer.

How to connect an HDMI cable to a TV if the TV is connected to a computer with an HDMI cable for the first time? The obligatory procedure is to configure the video card. To do this, you need to find the properties of the video card. When you enter the “Advanced” tab, you will find instructions on how to get a picture of your computer on your TV. In Windows 7, you need to go to the desktop in “Permission”. “Find”. The TV device will be detected in the system and it will remain to mark it as the main monitor. If the definition of the TV did not happen, then you need to enter the properties of the video card again and repeat all the steps again.

In the properties of the video card, it is possible to adjust the resolution, desktop size, adjust the color and other settings.

If you have problems with the image, this can be caused by both the HDMI cable and problems with the connected devices, which is most often caused by a software error.

Installation and connection to modern TVs

In the Dandy prefix, which were supplied to the territory of the USSR by Steepler, there were only two options for displaying the image:

• via AV-out (popularly known as “tulips”);
• via the RF port (antenna cable, after such a connection, it was still necessary to search for the signal on the TV itself).

The RF signal is not recognized by modern televisions at all, since television has been broadcast in digital format for more than 5 years. Therefore, figuring out how to connect the old Dandy to a modern TV, it remains to consider the option using an AV signal.

REFERENCE! Antenna cable connection is allowed via an external signal converter. They can be T2 set-top boxes. After connecting Dandy to the receiver, the latter needs to search for a signal. But the final image quality will be lower than when using AV.

The AV standard is considered obsolete, but it is still found in some modern TVs, for example, Samsung, LG, Philips, DEXP, released before 2017. A feature of the standard is an analog signal. The image is now displayed in “digital”, so a compatible TV must have a digital-to-analog converter (DAC), which manufacturers massively refuse (this makes production cheaper).

So, the easiest way to connect Dendy to a new TV is via an AV cable. The game console has 2 ports for this. VIDEO and AUDIO. If the cable used has 3 tulips, then only 2 of them are connected: yellow (responsible for video) and white or red (stereo sound is transmitted through them, but Dendy only supports mono sound, so there is only one audio input). In the settings of the TV itself, it is recommended to also enable audio output in mono format (otherwise only one speaker plays).

If the new TV does not have an AV input, then the problem can be solved by the following methods:

• Using an adapter. You will need one with an AV input and an output for any compatible port. It can be SCART or RCA-composite (visually. the same tulips, but there are 3 inputs for the video signal).
• Using an external converter. Their input is AV, and the output is HDMI, VGA, DVI or DP (DisplayPort). Such devices have a built-in signal converter from analog to digital and they are quite expensive (from 500 rubles on average).

IMPORTANT! Before connecting the Dendy via HDMI to both the TV, the set-top box and the converter itself, you should completely disconnect from the power supply. Otherwise, you can disable the GPU of the TV.

One more nuance: Dendy is designed to output images in 4: 3 format, while new TVs are produced in 16: 9 format. This may cause the picture to be stretched horizontally on the TV screen. You can get rid of this by setting the signal output to 4: 3 in the TV settings (there will be black bars on the sides of the picture, but the gameplay elements themselves are not curved).

Now on the same Aliexpress, Dendy of modern production is actively sold. They are originally designed to work with new TV and LCD monitors, so they integrate HDMI or DVI output (the converter is inside). When connecting such set-top boxes in the Smart TV settings, you just need to select the correct sweep frequency (1080 p 50 Hz or 720 p 50 Hz). Samsung TV can also enable progressive scan. this will slightly improve the image and reduce pixelation.

How to connect Dandy to an old TV

Most older TVs have an AV output, so you only need a compatible AV cable to connect. Before connecting the dandy to an old TV, you need to switch it to the appropriate video input (usually using the INPUT or Source button on the remote control).

If there is no AV, then an RF cable is used, connected to the TV antenna input. Next, you need to turn on a free channel and search for a signal. This option is suitable even for old black-and-white TVs, but the picture quality will be lower than with an AV connection (lower sharpness, the picture is a little blurry).

How to play Dendy on a modern TV. connection and setup

The Dendy game console is a clone of the Japanese Famicom console, produced from 1983 to 1995 (in America it was called the NES). This set-top box was designed for use with CRT TVs, which were common in the 80s and early 90s. There were no HDMI, VGA, DVI ports at that time. Therefore, it is not so easy to connect Dandy to a modern TV.

How to connect Dandy to a computer monitor

All monitors are designed to work with digital images. They only output analog via VGA or DVI output (corresponding to specification). Therefore, a converter is indispensable. The first step is to clarify what inputs are available in the monitor. It is recommended to use HDMI, if not, VGA. Next. purchase a compatible video signal converter (from AV to HDMI or VGA).

After connecting Dandy to the monitor, you need to manually change the display resolution (through the settings of the monitor itself). It is recommended to select the lowest value, the frequency is 50 or 60 Hz. The game console itself outputs a video signal at a resolution of 256×224 (for the early 90s this was considered acceptable).

So, it is quite possible to connect Dendy to modern TVs, but you may need to use a converter or adapter. Seasoned gamers argue that the best option is to buy an old TV with AV-input, they now cost up to 1000 rubles. There are no problems connecting to them, well, and the very process of the game it gives a certain authenticity. If you have experience with connecting Dendy or similar set-top boxes to new TV, share this experience in the Комментарии и мнения владельцев. Retro gaming is trending right now, so there should be a lot of connoisseurs of old school games.

How to connect NES or Super NES to Smart TV

Instead of relying on emulation software, devices like the 8-bit Nintendo entertainment system (also known as the Famicom) or the 16-bit Super Nintendo (also known as the Super NES / SNES / Super Famicom) can be connected directly to HDTV.

The NES has two options: RF port and AV / RCA port.

• If your TV has an RF port (for connecting to older antennas), you can use it. The NES RF switch plugs into a port next to the console’s power outlet. The RF switch box is designed so that the cable box and console can use the same channel on your TV.
• Need a better picture? Consider replacing the AV cable that comes with later NES consoles. Connect it to the AV output on the NES and to the same inputs on the HDTV. Be sure to connect the red port to the red port and the yellow port to the yellow one. This video illustrates this point.

For the Super Nintendo, the universal S-Video cable is the best option for connecting to your TV. This is also a solution for N64 and GameCube. The unfortunate and annoying checkerboard effect of old composite / RCA connectors makes S-Video a more popular option.

Super Nintendo users with good DIY skills may prefer to use the component video output. This is a red / green / blue (RGB) connection, also known as YUV / YPbPr. Most HDTVs have this cable connection (often using the same RCA ports as composite).

RCA to HDMI adapters

NES and SNES owners can also use adapters that convert the signal so that it can be displayed on an HDTV. These HDMI Converter Adapters work with NES, SNES, GameCube and N64 consoles. They are also very affordable for under 30.

How to connect 8-bit and 16-bit consoles to your HDTV

Do you miss your favorite childhood games? Problems with game emulators on your PC? Can’t get the controller to work? Don’t worry. there is an alternative.

Don’t let your old console languish in a forgotten drawer in your attic or basement. Instead, dust off and download your favorite games.

“But wait,” you say. “What about my new TV? I can’t connect my 8-bit or 16-bit console to a modern HDTV, can I? “

Well, yes, you can Read on to find out how to connect older consoles to your modern TV.

Connect your old Atari 2600 to your TV

Even the popular Atari 2600. the console that may have started the home gaming revolution. can be connected to an HDTV.

To do this, take the supplied RCA cable and connect the female-to-male coaxial adapter. Screw it into the RF connector on the back of your LCD TV or High Definition Plasma TV.

RCA cable is a composite video and mono audio signal ideal for low-fidelity graphics and audio playback on the Atari 2600.

If you cannot find a female to male coaxial adapter, connect the RCA cable to any RF loop-through device. You are looking for a device such as a VCR or DVD recorder. From here, the signal will be sent along the device’s normal route to your HDTV.

By switching channels a little, you’ll find that your Atari 2600 game is ready to play on your Smart TV.

Another console or old home computer?

In general, the way you connect your old game console or home computer to your HDTV remains the same. It doesn’t matter if you have a Super Nintendo console or a Commodore 64 computer.

Make sure you can use an S-Video or AV connection, not RF, and buy a suitable connector.

Note, however, that you may also need a converter; some older devices do not use standard signals (eg Commodore 64). Buying a quality HDTV compatible AV cable will reduce the likelihood of problems.

In addition, if you are using a TV with a SCART connector, a composite-to-SCART adapter may work. Just plug the AV cable into the adapter and then plug it into the SCART jack on your TV. Finally, select the appropriate output on your TV and start playback.

Don’t let the TV start auto-tuning or changing channels on you because it doesn’t like it or can’t receive the signal automatically. You may need to spend some time switching between channels and tuning them, so be persistent!

What older game consoles and computers have in common

You may have an old Nintendo Entertainment System or an Atari console. As different as these consoles are, each one has the same quality. the way you connect them to your TV.

• RF: old style air connection. While this is a workable option, cables will wear out over time, so in most cases they will not provide a reliable image.
• Composite: red, white and yellow cable that is still in use. Red and white. audio channels, yellow. video. These cables are equipped with RCA connectors and are also known as AV cables.

While some consoles only have one or the other, some have two. It is also possible to use adapters, converters and even special cables to view the output from your console on a high definition TV.

Let’s see how to connect popular retro consoles to your modern TV.

How to connect a Sega console to your Smart TV

If you want to connect your old Sega console to a modern TV, you’ll need the right cable again. Each Sega console has its own video output port, which can be confusing. Luckily, you can still find the right TV cable for your console online.

Connecting your TV using a Composite or AV cable

For example, if you own a Sega Genesis (also known as Sega Mega Drive), you will need to find the correct cable for your specific model. Oddly enough, different versions of the Sega Genesis have different video connectors.

Once you have the right cable, you can easily connect it to the composite / AV connectors on your TV.

Is it possible to connect a laptop to a TV without HDMI?

If our laptop doesn’t have HDMI / micro HDMI, it might have DisplayPort. It is usually denoted by the letter D. It transmits image and sound, such as HDMI, to another device. In this case, we can equip a DisplayPort HDMI cable through which we connect the laptop to a TV with HDMI input.

How to connect a component cable to a TV?

How to connect a component cable to a TV

• First, you need to find the component video output (green, blue, and red) and the audio output (white and red).
• Connect cable to video source
• Find component video and audio inputs on your TV
• Connect the free end of the cable to the TV
• Turn on the TV

How to connect laptop to TV via AV cable?

Connect the HDMI cable from the laptop to the same connector on the converter. Connect the audio and video inputs of the TV and the converter with “tulips”. Configure the laptop and TV according to the instructions described above (for VGA). Specify AV or “Analog” as the signal source.

How to connect a cable to a Smart TV?

So, connect the cable between the router and the TV via the Ethernet port and go to the Smart TV menu in the “Network” section and open the “Network Settings” item. After entering the network setup, you will see a message that the network cable is connected. Click the “Start” button to configure your wired network settings.

How to connect dvd to TV via HDMI?

HDMI cable Connect one end of the cable to the HDMI connector on your DVD player. Look for the “HDMI” or “HDMI OUT” label. Connect the other end of the cable to the HDMI jack on your TV.

How to Connect DVD to Old Samsung TV?

To complete the connection, you will need to do the following:

• on the back of the TV we find the required port, it can be signed HDMI In.
• we connect using an HDMI cable.
• in the TV settings, you need to set the signal reception from the HDMI port;
• turn on the equipment and check if the connection is correct.

How to connect an AV receiver to a TV (for example, an Onkyo AV receiver)

Are you finally the owner of a great device like the Onkyo AV Receiver? Well, then, the first thing you get into when you unpack the product is to set up it, choose a location, and connect the AV receiver to your TV, personal computer and / or other devices. And this is quite logical, since it is the receiver that will become the heart, ensuring the smooth operation of the entire “organism” of the acoustic system. Given the importance of this device for the smooth functioning of your audio complex, the issue of connecting it to all components of the system (including the TV) should be treated with due attention. In this article, we will talk about the general principles of connecting this product.

Are you finally the owner of a great device like the Onkyo AV Receiver? Well, then, the first thing you get into when you unpack the product is to set up it, choose a location, and connect the AV receiver to your TV, personal computer and / or other devices. And this is quite logical, since it is the receiver that will become the heart, ensuring the smooth operation of the entire “organism” of the acoustic system. Given the importance of this device for the smooth functioning of your audio complex, the issue of connecting it to all components of the system (including the TV) should be treated with due attention. In this article, we will talk about the general principles of connecting this product.

Connecting an AV Receiver to a TV: Principles You Need to Know

The first principle: use the type of connection that is optimal for your case, the best in terms of the quality of processing, transmission and broadcasting of both audio and video signals. If we talk about the video signal, then here the palm belongs to this type of connection as HDMI. The component method of connection transmits the video signal a little less qualitatively, the composite type of connection is even weaker, and closes this row, which is practically unsuitable for video transmission. the RF connection method. As for the transmission of an audio signal, there are even fewer options: the same HDMI (but not all models of receiving devices support this mode); almost not inferior to it in quality and is a fairly popular digital connection method (connection is made using a “coaxial” wire or optical cable); the third connection method is used a little less often. analog.

The second principle is the principle of making the connection as simple as possible. In other words, the simpler the connection between the components, the better the signal will be. In practice, this means that the communication chain between the components should consist of as few cables as possible. This way you minimize the chance of interference. In addition, if a break occurs somewhere, it will be much easier to determine its location, since you do not need to check each of the many cables (if you connect devices with one wire).

The third principle is probably the easiest to understand, but not always affordable. This principle consists in the use of the highest quality wires and cables used to connect any components to the receiver. Connecting your audio system is not the best item to save money. After all, the quality of the image and sound obtained at the output ultimately depends on the quality of the cables. In addition, it is important to use the shortest possible wires (again to minimize the risk of interference). The shorter the distance that the signal needs to cover, the greater the guarantee that it will be clear and undistorted.

The optimal solution for connecting the receiver to the TV today is to use an HDMI cable. One end of this wire must be inserted into the receiver’s connector (if we connect an Onkyo AV receiver, then this connector must be found on the rear panel of the product). It is labeled HDMI Monitor Out. To the TV, we connect the second plug of the cable by inserting it into the connector labeled HDMI Input.

A nuance: this marking is present only on models with an LCD or plasma screen! If your TV is not equipped with this special input, connect using the component method.

AV connection

Tulip connection is usually used for older TVs that were produced before the HDMI connector. I’ll tell you right away that the picture quality with this connection leaves much to be desired, on some TVs it is even difficult to parse the text that is displayed on the TV. In such cases, we recommend increasing the font to the maximum in the prefix settings. Connection: here is a little more complicated, since on one side there will be a 3.5 (AUX) jack, and on the other there are 3 tulips in yellow, red and white. If your TV has connectors of the same colors. connect, if you have only 2 tulips on your TV, you will have to pick it up “by the scientific poke method” until the image and sound appear.

How to connect a set-top box to a TV

We connect via HDMI cable

The first point is the simplest and most common. Anything you need. this is to connect the set-top box to the TV with an HDMI cable. After that, do not forget to change the signal source on the TV (look for the Input or Source button on the remote control). Although everything here is really very simple, sometimes there are situations when your TV does not see the set-top box in any way. In this case, we recommend trying to connect the set-top box to another TV and check how the set-top box will behave on it. If the launch is successful, then your TV and set-top box are really incompatible. This happens very rarely and there is no specific explanation for this. If you have such a situation, just change your set-top box to a model of another brand or with a different hardware.

method of connecting the set-top box to the TV

Let’s take a look at each of them in detail.

Connecting an Android set-top box to a TV

Very often our clients have the problem of connecting an Android set-top box to a TV. Actually, this article should show the options for connecting your TV box to the TV. Looking ahead, I will say that we have not touched on all connection options, but the 3 most basic.

How to connect via HDMI-AV (RCA) converter

The third is the rarest, but still a good way to solve the problem of connecting a set-top box to an old TV via HDMI. If your set-top box does not have an AV output, and the TV does not have an HDMI connector, then this item is for you. Before connecting, you will need to purchase an HDMI to RCA converter. The cost of this device is about 10-15. Also, do not forget that this adapter is powered by USB, it can be connected directly to the set-top box.

I hope this article was useful to you. Still have questions? Ask them in the Комментарии и мнения владельцев!

How to connect a shoga to a TV

The development of computer technologies affected not only the technical parameters of the “hardware”, the software has undergone significant changes. If we compare with what was on the SEGA, Dandy game consoles at the end of the last and the beginning of this century, now completely different pictures have appeared on the screens. The evolution of software has radically changed the external and internal world of computer games. improved graphics, increased functionality, increased productivity. But real gamers know how it all began, and those clumsy, at first glance, a modern user toys evoke more emotions than the most advanced gaming software.

Antenna cable connection

Do not despair if the AV wire is out of order or lost. In this case, the set-top box can be connected to the TV using an antenna cable. This requires a modulator plug into the AV output located on the SEGA. Then connect the modulator to the TV using an antenna cable, as in diagram 1.

After connecting all the wires in places, you need to turn on the set-top box and start auto search on the TV to find the channel broadcasting from SEGA. After completing the setup, start playing.

Connecting Sega to a modern TV

Sometimes, looking at the same type of modern computer games, there is an irresistible desire to get the SEGA console and try something new, or rather, remember the old one. Only if you try to connect to a modern TV, then be prepared for disappointment. plasmas, LCDs, LEDs are not designed for old Sega, Dandy and Play Station.

Now all television equipment works with a digital signal, and the main working connectors have the appropriate appearance and purpose. At the same time, on old consoles, such as the SEGA Mega Drive 2, there is no sign of a digital connection. They provide wires and connectors for analog connection only. Therefore, in order to remember the past and plunge into the worlds of Super Mario, Mortal Combat and other classic games, you need to act according to proven methods.

Connecting with an AV cable

All modern TVs have analog connectors, you just need to know where to look and how to connect. Also included in the SEGA Mega Drive 2 set-top box is a wire called “tulips”, with the help of which the connection is made. There are several options:

• AV input. There are no problems here. Usually this type of connection is located on the side of the TV, but it can be located at the back and is indicated by INPUT. In any case, it can be recognized by 3 characteristic connectors. yellow, red, white, as in Figure 1. You need to connect based on the color and purpose of the connectors. yellow contacts are for video signal transmission, and white for audio signal in mono mode. It is possible to turn on stereo sound, but for this you need another plug, which is inserted into the red jack and is responsible for the right stereo channel, in which case the white contact group acts as the left channel.
• Component TV input. Many TVs have home theater connectors called AV IN / CPONENT IN. There are usually 5 of them, as in Figure 2, but in some cases a larger number is provided, depending on the TV modification. You should not understand the nuances of each component. To connect Sega, it is enough to find the video input marked as “Y”. the yellow plug is inserted into it, and the audio input L for the white plug.
• SCART input. This convenient contact group unites all video and audio inputs and outputs in one connector, but for such a connection you need an adapter, as in Figure 3. It connects to SEGA according to the same principle as in the case of the AV input. The adapter is simply inserted into the SCART connector, which is usually located on the back of the TV;

IMPORTANT. Remember that each manufacturer of TV equipment uses different algorithms for switching video inputs on their products. Therefore, to determine which input Sega will work on, you need to follow the instructions for the TV or by the selection method.

We connect Sega to a computer monitor

To enjoy the good old games, it is not necessary to connect the set-top box to the TV, you can use a monitor for this purpose. To bring this idea to life, you need a video adapter or TV tuner. You can use the built-in device integrated into the computer, but it is better portable, which transmits the signal through the HDMI jack.

To start new equipment, you need to install drivers and configure new computer software. For the convenience of using the set-top box through a TV tuner, it is recommended to install a special AverTV program. After completing all the settings, connect the SEGA tuner or adapter in the same way as described in the subsection “Connecting with an AV cable”, and start playing your favorite games.

How to connect TV to AV?

Connect your TV to the AV receiver using an HDMI cable. Use “HDMI 1” input on your TV and “HDMI out 1” or “Main” on your AV receiver. This will allow you to view on the TV screen all the necessary settings that are needed to connect the receiver.

How to enable AV mode on a Samsung TV?

In order to switch to AV now, you need to first turn it off from the power button of the TV (without pulling the plug from the outlet) and use the same button to immediately turn it on, then the TV will turn on in the mode we need.

How to connect speakers to a TV through tulips?

To connect the speakers to the TV, you must use a red and white cable. This is a special color coding: white and red “tulips” are used for analog audio (white for mono signal or left channel stereo signal, and red for right channel).

How to connect tulips from a set-top box to a TV?

The connection diagram through the “tulip” is as follows:

• Turn off the TV and receiver from the sockets.
• Plug the connectors on the cables into the jacks where they fit.
• Connect the antenna cable to the set-top box.
• Turn on the TV, go to the menu and select the AV mode.
• Tune channels on a digital set-top box.

How to connect to RCA TV?

Connect the RCA cable (Audio / Video) to the TV-set-top box with RCA Audio / Video IN jacks on the TV.

• TV / AV, a button for switching the TV mode, is also available on the TV remote control.
• AV Video IN (RCA connector), TV video input, usually yellow.
• AV Audio IN Left (RCA jack), audio input, left channel.

How to connect the receiver to a Samsung TV through tulips?

How to connect a digital set-top box to a Samsung TV

• Connect the antenna cable to the input of the receiver (DVB-T2 set-top boxes).
• Connect the video / audio input of the TV using the 3RCA-3RCA cable (tulips), which is included in the package. If your TV has a digital HDMI input, you can use it instead of 3RCA.

How to connect the receiver to a computer?

It’s that simple! Connect your computer with an HDMI cable to any HDMI free output of the receiver, set this input in the receiver settings menu. Accordingly, set up the computer for HDMI. Only with this connection will the receiver be able to “understand” the DSD stream from the source.

How to connect digital TV to an old TV?

The answer to the question of how to connect an old TV to digital TV is quite simple. To do this, you need a set-top box with support for the DVB-T2 standard, for example, a Wifire TV set-top box. It connects to any TV via HDMI or analog output (AV). To operate the device, you need a WI-FI connection to the Internet.

Is it possible to connect a TV to a computer via a receiver?

You can connect the AV receiver to your TV using a standard two-ended HDMI cable, provided the TV has this type of input. The decoder uses an HDMI connector labeled Out, while the TV uses a similar connector labeled In. Simply connect the devices with a cable.

How to output TV audio to home theater speakers?

Another way to transfer sound from TV to an audio system is with an optical cable. To do this, make sure your TV and home theater receiver have an optical connector. The TV must have an OPTICAL OUT jack, and the home theater receiver must have OPTICAL IN.

How to connect the receiver to a DEXP TV?

To connect, just connect the TV directly and then insert the input from the antenna into the set-top box. After that, go to the Audio-Video (AV) mode. If the connection is correct, the device menu should open. In practice, older TVs usually do not have HDMI connectors.

How to connect a receiver to a TV through tulips?

• de-energize the receiver;
• connect the cable to the TV and the tuner, the colors of the jacks must match the color of the tulips;
• connect the antenna wire to the receiver;
• turn on both devices, and select the signal source with the remote control on the TV. this will be “AV”;
• search for channels, save settings.

How to connect the receiver to a TV?

How to connect digital TV using a digital set-top box

• Disconnect the power to the TV.
• Connect the antenna cable to the antenna input of the digital set-top box.
• Plug in the power and turn on the TV.
• Select the required input source in the menu: HDMI, AV, SCART, etc.
• Step 5.

How to connect an AV receiver to a TV via HDMI?

Connect your TV to the AV receiver using an HDMI cable. Use “HDMI 1” input on your TV and “HDMI out 1” or “Main” on your AV receiver. This will allow you to view on the TV screen all the necessary settings that are needed to connect the receiver.

Connecting the receiver Jack-3RCA cable

a) On the back of the receiver you should see the AV connector. It is necessary to connect the Jack-3RCA cable (tulips) to it.

b) After connecting the cable to the receiver, then look for the three RCA (tulip) connectors on the TV. On some models, the connectors are located on one of the side panels, while on others, on the back of the case. Connect wires exactly according to colors!

How to Connect AV to HDMI to get Video Games working on a newer TV

c) Turn on the equipment and enjoy watching.

Connecting the receiver via HDMI cable

a) Find a free HDMI port on your TV. Most modern TVs are equipped with at least one HDMI connector. This connector is commonly referred to as “HDMI”. If the device has multiple ports, each of them will be numbered (for example, HDMI 1, HDMI 2). On some TVs, HDMI connectors can also be found on the front or side panel.

b) Connect one end of the cable to the receiver.

HDMI cable connectors can only be inserted in one direction. Never try to force the cable connector into the connector, as this may damage not only the cable, but also the device itself.

c) Connect the other end of the cable to your TV.

If your TV has multiple HDMI connectors, note the number of the connector you are using.

d) Switch TV to HDMI source. Turn on your TV and satellite receiver. Use the “SOURCE” or “INPUT” button on the TV or remote control to select the HDMI port. You will most likely have to press the button several times before you reach the desired connector. When you switch to the correct signal source, a picture of the device will appear on the screen.

Connecting the receiver 3RCA-3RCA cable (tulips)

a) On the back of the receiver, you should see 3 connectors of different colors, you need to connect an RCA cable (tulips) to it in the same colors.

• Red (provides signal transmission. Designed for the right channel)
• Yellow (activates video signal)
• White (provides audio or mono signal from the left channel)

b) After connecting the cords to the receiver, then look for the three RCA (tulip) connectors on the TV. On some models, the connectors are located on one of the side panels, while on others, on the back of the case. Connect wires exactly according to colors!

c) Now you need to turn on the equipment. It is worth recalling that you will have to use two remote controls. for the TV and for the receiver separately. We turn on the TV with one remote control, and activate the receiver with the other remote control. The readiness should be indicated by a green indicator that lights up on the receiver after it is turned on (or another notification. check the instructions).

How to independently connect the receiver to the TV?

Consider several ways with which cords you can connect the receiver to the TV:

Conclusion.

• You can connect the equipment in all of the above ways. If your TV has an HDMI connector, we advise you to connect through it, as the image will be of high quality. If you have any problems or problems during setup, be sure to let us know! We will be happy to help you cope with this problem.

Connection

In many ways, connecting a TV and PC is similar to a similar process for a projector.

With the devices disconnected from the network, connect the VGA cable to the corresponding port on your TV.

If necessary, connect the wire to the connector on the adapter.
Connect the second VGA plug to the port on the back of the computer.

Note: The required VGA connector can be located both on the motherboard and on the video card.

In both cases, secure the plug firmly with the clips.

After completing the steps, the TV screen will become an additional monitor for your computer, while retaining its original functions.

Connecting a computer to a TV with a VGA cable

Many modern video cards and TVs are equipped with VGA interfaces by default, allowing you to connect these devices without any problems. It is about this type of connection and its subsequent configuration that we will talk about further along the way.

Preparation

If there is no VGA connector on one of the connected devices, you can use a special adapter, the type of which is determined by the presence of other interfaces. One such device, VGA-HDMI, is shown below.

Like many other varieties, you can make your own VGA cable. However, such a wire does not have the simplest structure and without proper knowledge it is better to get a ready-made one.

The only purpose of the VGA interface is to transmit video signals. This type of connection does not allow transferring files or sound.

Based on the above, you will need external speakers connected to your PC.

After completing the selection and purchase of components, you can start connecting.

Connecting PC to TV via VGA

Whatever the steps described by you are not taken to connect the PC to the TV, the main device in any case will be a computer.

Customization

In the case of many TV models, after connection, the video signal may not be transmitted. This is due to incorrect settings on both PC and TV.

On a standard TV remote control, press the button labeled “Input”.

Sometimes, instead of the indicated button, “Source” may be present, by clicking on which you need to select a signal source through the menu.

Some models require adjustment of the video signal source through the TV menu, although quite rarely.

Using the context menu on the desktop, open the “Screen Resolution” window.

Select your TV through the drop-down list.

Set the screen resolution to the most appropriate for you.

Click on the link “Display the image on the second screen” or use the keyboard shortcut “WinP” to open the display settings menu.

Select the appropriate display mode as with the second monitor.

If you are a Windows 10 user, the setup steps are slightly different from other versions of Windows.

This completes the connection and configuration process.

The connection method presented in the article is the simplest, since VGA interfaces are usually equipped not only with PCs and TVs, but also with many laptops. However, the quality of such a connection leaves much to be desired and, if possible, you should use an HDMI cable.

In addition to this article, there are 12387 instructions on the site. Add Lumpics.ru to your bookmarks (CTRLD) and we will definitely be useful to you.

Thank the author, share the article on social networks.

HDMI cable

Via HDMI port. basic and best way. Through HDMI connection, Smart TV set-top box is able to transmit the brightest, richest and clearest picture and display video in the highest resolution that your TV set allows. It is very simple to connect: just plug the HDMI cable, which is included in the bundle of all Smart set-top boxes, into a suitable port of the set-top box and TV. Then, using the TV remote control, select the signal source corresponding to the port to which the Smart TV set-top box is connected. Depending on the brand and model of the TV, this operation can be done with the “Input” or “Source” button. You can also switch through the menu. Typically, in modern TVs, there are several HDMI ports as well as others. AV, scart, TV, and the like. When the Smart set-top box is turned on and connected to the TV, in the TV signal source selection menu, the port to which it is connected will be highlighted or active. When changing the signal source to Smart set-top box. the image of the main desktop of the Smart STB should appear.

Connecting a Smart TV set-top box to a TV

So, you have become the proud owner of a Smart TV Box set-top box. If you have a question: how to connect a Smart TV set-top box to your TV. this article will help with this problem. There are several ways to connect a TV set-top box to your TV, depending on the model of the set-top box itself and the presence of certain ports on the TV. Consider the main and most popular ones.

AV cable

With an AV cable (tulips). This method is used if your TV does not have HDMI ports. The quality and clarity of the picture in this case will be slightly worse than in the first version. But this method is suitable for almost any TV, it is very rare to find TV models without tulip-type inputs. Before connecting the Smart set-top box to the TV via an AV cable, you need to make sure that the selected set-top box model has an AV cable outlet. Since not all Smart boxes have it. If there is. then it is necessary to purchase the cable itself, as a rule, they are not included in the kit. AV cable for Smart set-top boxes is a wire with one connector (3.5 AUX) on one end and three multi-colored tulips on the other. The AUX connector is inserted into the corresponding connector of the set-top box, and the tulips are inserted into the TV connectors of the corresponding color. This is usually enough. But since one of the tulips transmits a picture, and the other two are sound, and the flowers in the cable and the TV do not always match, sometimes you have to select the signal by rearranging the “tulip” connectors in the nests that do not match in color. In this way, you can select the correct image and sound transmission. Naturally, through the TV menu, before connecting, you need to select the signal source responsible for displaying the image from the “tulips”.