How to Connect a DVD Player to an LG TV

Gadgets

How to connect a DVD to a Samsung Smart TV

There is nothing complicated about connecting a DVD player to a TV. However it is necessary to know some details, otherwise the procedure may take more than one hour.

  • Which sockets can connect a DVD player to your TV
  • Connecting DVD to TV: adapters used
  • Connecting a DVD
  • Connecting a DVD to an old TV
  • Possible problems and solutions
  • tips
  • Checking the Technique’s Functionality
  • Taking care of your DVD player
  • Taking care of the TV screen

How to connect a DVD to an LG TV

The first thing on the mind of everyone who bought a DVD player. How to connect it to the TV and whether you can do it yourself, without resorting to the wizard? LG manufacturers have tried to make this process as simple and intuitive as possible, and all you need to do is follow the instructions. Nevertheless, before you start to connect a DVD player to your LG TV, it is better to have a complete understanding of the settings.

The first thing to do is to carefully examine the back (in some cases the side) panels of both devices for available connectors. These can vary depending on the brand of equipment, models, and age. Here are the most common options:

HDMI connector

The most common variety in today’s models, which allows for the highest quality picture and high data rate. This connector looks like a USB connector, but is thinner and longer. In order to guarantee a distortion-free picture and noise-free sound, the HDMI cable must be model 2.0 and above and labeled High Speed Ethernet.

If you have an LG plasma TV, the manufacturers recommend to prefer this method.

RCA connector

The most common connector for several decades, the second name. “tulip”, because it consists of three jacks of different colors: yellow for picture transmission, red and white. for sound. It is very difficult to make the wrong connection. It is just necessary to insert the plugs into the jacks of the corresponding color.

Scart jack

It is relatively rare, but the quality of information transfer loses only to HDMI-connectors. In order to connect the devices to each other, you need a Scart-RCA cord. The side with the Scart connector, the cord is inserted into the player, and the side with the “tulip” connector. into the TV.

On one side of the component cable are five plugs. These must be connected to the DVD player, following the color coding. Three of them are responsible for the picture, and two. for sound. The video ports are red, green and blue. Audio. red and white. To avoid confusion between the two red plugs, experts recommend to first lay out the wire on any working surface and divide the plugs by function (audio. video), and then already start the connection.

If you have only three colors (red, blue and green) of connectors in your component cable, then they can only send pictures. That means you need an additional wire for audio with red and white plugs.

S-Video

The least preferable of all the above ways to connect your DVD player to your TV. This plug is only for picture transmission. To connect audio, you will need to use an optional RCA cord or 3.5mm jack.

In case you have a standard antenna output on your TV, the solution is an S-video-RF adapter.

Problems that may arise when connecting DVD-player connectors are tightly flush with the TV set LG And their solutions

Despite the supposed simplicity of the connection process, problems occur quite often. Fortunately, they are most often caused by incorrectly connected cables to the connectors and can be easily fixed.

Check the correct connection of cables to connectors and their color matching.

Check if the cables are connected correctly and color coded.

If you have connected a DVD player but it is not detected by your LG TV, there is most likely a problem with the cable. Check for mechanical or other damage, check that the connectors are tight. When connecting, the cord should not be stretched, but should sag a little, otherwise the signal may be transmitted with distortion.

The player does not turn on when it first starts up.

If this is the case, you should contact a service center. You should not solve the problem yourself and moreover disassemble the device. This could lead to its eventual breakdown.

How to connect a DVD player to your Samsung TV

Contributor(s): Travis Boylls. Travis Boyles is an author and editor who writes about technology for wikiHow. Experienced in technical writing, computer technical support, and graphic design. Specializes in Windows, macOS, Android, iOS and Linux. Studied graphic design at Pikes Peak Community College.

Number of views on this article: 24 580.

In this article we will tell you how to connect the DVD player to your Samsung TV. Can do this via HDMI, composite (RCA), component (YPbPr) or S-Video cable. Find out what jacks your TV has first, then buy a DVD or Blu-ray player. To watch video from the player, the TV must be set to receive the appropriate incoming signal.

  • HDMI cable. this is a single thick cable that can be connected to most high-definition televisions (HDTVs). Plug this cable into the “HDMI” jack on the back of the player. The plugs on the HDMI cable follow the shape of the HDMI connectors on the back of your DVD player and TV.
  • Component cable (YPbPr). this cable can transmit high-definition video signals. Each end of this cable has five plugs. the red, green and blue plugs are for video signals and the separate red and white plugs are for audio. Insert each plug into the corresponding colored jack on the back of your DVD player.
  • The composite cable (AV or RCA) is an older cable, so it only supports standard-definition video (SD) signals. Each end of this cable has three plugsthe yellow connector carries video and the red and white plugs carry the audio. Insert each plug into the corresponding colored jack on the back of the DVD player.
  • S-Video is an older cable that only supports standard definition (SD) video signals, but transmits them better than an RCA cable. Each plug of this cable includes 4 pins and a plastic pin. Align the pins of the plug with the S-Video jack holes on the back of the DVD player and plug the cable in. You’ll also need to connect a composite audio cable (insert the red and white plugs into the corresponding RCA jacks) because an S-Video cable does not transmit sound.
  • Most modern televisions do not have an S-Video jack.
  • Some of today’s televisions have the component and composite jacks combined into one port. If you are connecting a composite cable, insert the yellow plug (for video transmission) into the green connector on the back of the TV. [1] X Source of Information

Plug the DVD player into an electrical outlet, then turn it on. Make sure there is a vacant outlet near your TV for your DVD player; if not, use a power strip (T-branch).

Tune your television to the signal from the DVD player. Each connector on the back of the TV comes with its own signal. Press to select the jack on your TV remote control until you reach the jack that your DVD player is plugged into. Most DVD and Blu-ray players have a welcome page that will appear on the screen once you select the appropriate jack.

TV with a built-in player

To turn on the TV with built-in player, you don’t need to use cables or additional equipment. All you need to do is pull out the disc tray, put the movie in, and press the play button. The guide can help figure out how to connect a DVD to your TV. Even older TVs (Samsung, Philips) can be connected to your new player.

After buying a DVD player, it’s logical to ask how to connect your DVD to your TV. Many people might think there is nothing to it. However, as practice shows, problems with the connection arise often. As a result, the process of setting up the player drags on for a whole day.

How to connect a dvd to the tv?

Every owner of a brand new player asks himself a single question. how to connect a DVD to the TV. In fact, this procedure may be somewhat more complicated than it seems at first glance.

But guided by the information below, everyone will find a suitable connection option for themselves, regardless of brand and year of TV and in a short period of time will be able to enjoy videos and favorite movies.

Ways to connect

The first thing to do is to examine the contents of the box of the new player. As a rule, the manufacturer gives the RCA wire, as it is also called “bells”.

It is a cord, where there are pins of different colors at the ends:

  • Yellow is for the picture signal;
  • Red. transmits sound in stereo mode to the right speaker;
  • White. functions the same as the red pin, only in this case, the signal is fed to the left speaker.

Similar connectors have both dvd player and TV, and the corresponding color palette pins.

To make sure you finally have the right connector you can see characteristic inscriptions: next to yellow. video; next to white and red. audio. On televisions, these jacks are often located on the back, side, or front. Now all that’s left to do is make the connection by the corresponding colors, and you can enjoy your favorite video or audio recordings.

If you are lucky, you may find a SCART wire in the box of your new turntable, characterized by a wide connector. The luck in this case is the ease of connection. It is necessary to find the necessary connector on the player and the TV. There will be one on the player, but there are two on the TV: one for incoming signals (marked with an arrow inward) and one for outgoing signals (marked with an arrow outward). Connect the wires, and you’re done.

DVD player can be connected in one more way through S-video output. This method requires a special wire. But keep in mind that if you connect only one such wire, you will be able to set only the video signal, and for audio signal you will need to insert “bell” in the appropriate jacks.

Composite connection scheme is similar to connection “bell”, the only difference is that the connectors are not 3, but 5:

connect, player

Today, even an old TV set can be connected to the player. You will need to buy additional adapters, because the TV and the player do not have the same connectors.

Connecting via HDMI

HDMI cable connection method I would like to single out, as it is designed for modern technology models (LCD, LED and plasma TV models), so it is in high demand. Another thing is that modern appliances, as a rule, are purchased for the best quality of images and sounds, and it is thanks to such a special cable all the desired characteristics can be preserved and transferred to the viewer.

Picture 2. Selecting the signal source in the TV settings.

To connect the TV to the DVD player, it is necessary to follow the following instructions:

  • On the body of the TV, you must find the port, which looks similar to the USB-connector, but only a little longer. It may even be labeled HDMI or HDMI In.port. Picture 1 is sure to keep the confusion at bay.
  • Of course, you must first make sure that the player also has the necessary interface. It is also appropriately named HDMI Out.
  • Now connect the device by inserting each HDMI cable into the correct ports.
  • After that, be sure to check the work done. That is, we insert any disc and turn on the player.
  • It is necessary to specify the source of the signal HDMI port or go into Input mode, depending on the model of TV. As shown in picture 2, select a suitable source.

In addition to the fact that HDMI-cable allows you to connect a DVD player, using it you can connect your TV to your computer, which gives even more opportunities to play on the big screen necessary files in different formats in good quality.

So, regardless of the TV model, the new DVD player can be connected in a suitable way pretty quickly, because there were all kinds of options to achieve the desired result.

Determine the available connectors

    HDMI. The ideal solution, especially if you have a plasma. Ensures the transfer of picture and sound in the highest quality. If you choose this method, be sure to look for a quality connection cable. Cable model 2 is a priority.0 or higher, marked “High speed with Ethernet” and preferably branded products.

It should be noted that all kinds of adapter cables are available now, so there is no hopeless situation. It remains only to choose the most convenient way for you.

Possible problems

Sometimes everything is done right, but the movie doesn’t play, the player doesn’t work, and everything is bad. There are some bugs (not necessarily made by the user). Let’s consider them in detail:

If the player is plugged into a separate outlet, you should in any way (safe for life and health) check the presence of power in it. May be the cause of the player not working. If the device is plugged into an extension cord, you should also check the socket where the power plug is inserted: it is quite possible that this socket in the extension cord/adapter has fallen into disrepair.

You need to make sure that your TV set doesn’t receive the signal from the player on any of the available communication channels. Do not forget about the hidden settings that can suddenly open a big list of other, untested channels.

As already mentioned, you should make sure that the wire between the player and the TV is not stretched. even if it is plugged in, the picture can be so distorted that it is easy to perceive it as real interference.

And in any case you should check if the plug is still in the player/device. It’s quite possible that your dog, cat, child, or even yourself accidentally stepped on the wire and pulled it out of the equipment. It happens sometimes.

Everything fails: plugs, connectors, and wires. It is quite possible that the high humidity caused the burnout of the connector, or during the transportation of the equipment there was an internal breakage, or the cockroaches chewed through the wire (it also happened).

Contact a service center does not hurt if you can not find the cause of a broken DVD-player on their own, or found unsolvable by their own efforts breakage. It is also possible that the player is simply defective. In this case you need to replace it under warranty or buy a new one.

It is not uncommon that the player was taken to a service center for repair, but during the checkup it turned out that its performance is beyond all doubt. In this case you should look for the problem in your TV or other equipment. The easiest way to find the cause of a malfunction in this situation is to call a specialist at home.

After all the necessary actions the DVD player should work properly, and the movie should appear on the screen. When the player stubbornly refuses to work, go over the wiring diagram once again to rule out possible errors. And don’t forget: if the cable type doesn’t suit you, you can always buy an adapter.

Connecting, Connecting to TV, Connecting.9. LG DKS-6100 instruction manual

Attention! The text in this document was recognized automatically. To view the original page, you can use the “Original” mode.

of the connected equipment, there are several

ways to connect the unit. Use one of the connections described below.

For best results with the

If necessary, refer to the instructions on

To get the best sound reproduction quality, connect to the jacks

AUDIO OUT of the unit audio inputs of the amplifier, receiver, stereo or audio/video equipment.

See. To connect to other equipment, see “Connecting to other equipment” on page 17. 9.

Connect the left and right output jacks

AUDIO OUT system with left and right inputs

TV’s audio inputs (A) with the

If your TV supports a high

If you want more clarity, you can increase the resolution of the video picture by connecting the DVD player via

If your TV does not support progressive

sweep, connecting the DVD player through the progressive video output will lead to distorted

television. Set your TV to the correct

headphone jack (on the recording deck) or speaker

Make one of the following connections at

Depending on the capabilities of the available

Connect the VIDEO OUT connector on your DVD player to the

VIDEO IN jacks on the TV attached

Connect the left and right AUDIO OUT jacks

DVD player to the AUDIO LEFT/RIGHT IN jacks

(A) with the included audio cables.

Connect the S-VIDEO OUT jack on the player

DVD with S-VIDEO IN jack on your TV with

using the optional S-Video (S) cable.

Connect the left and right output jacks

AUDIO OUT of the unit to the left and right audio

TV inputs (A) with the included

Connect a component video (Color Stream

Connect the output jacks COMPONENT VIDEO

with the corresponding input jacks on the TV

Using the optional cable Y Pb Pr (C).

Connect the COMPONENT VIDEO OUT/PROGRESSIVE SCAN output jacks on the unit to the corresponding input jacks on the TV with the optional Y Pb Pr (C) cable.

Connect the left and right AUDIO OUT jacks on the device to the corresponding input jacks

audio jacks on the TV (A) using the supplied audio cables.