ZTE Blade phone does not turn on what to do

What to do if the phone does not turn on this. Why does the ZTE phone do not download (not turned on). How to restart the hovering phone even with a fixed battery

After I used the phone of ZTE, I came across some problems, my smartphone did not turn on and the sensor itself pressed, I decided to give these troubles and I will tell you about it in the article. ZTE is one of the most famous telephone and telecommunication equipment in China. However, in the international market, the smartphones of this manufacturer have received recognition from a huge number of users. But, despite such popularity and the fact that the quality of components of mobile devices in the Middle Kingdom is trying to improve every year, the problem of low.Grade assembly remains relevant.

blade, phone, does, turn

ZTE Blade A320 wont boot up

This is what the ZTE smartphone looks like in a disassembled state. Here, a power connector is repaired here, due to the problems with which the smartphone refuses to charge and, accordingly, turn on.

As a result, about 20% of users who have acquired this device complain about the bad operation of the battery and problems with the recharge of a smartphone. Others write about ZTE software errors. Such malfunctions are held for this device, not without a trace and, ultimately, turn it into the so.Called “brick”. That is, into a smartphone that refuses to work at all. Therefore, the article will consider the reasons why the ZTE phone is not included, and the main ways to solve this problem will be dismantled.

What are the reasons for the refusal of the phone zTE

All problems, in general, with any computers (electronic computing machine), can conditionally be divided into two categories.

    Hardware. Failure of certain components;

This also applies to ZTE. In more detail, the main hardware reasons why this smartphone model stops working is related:

  • With failure of the power connector or power controller. This problem is present in many ZTE smartphones, but it is especially pronounced in the budget models of this phone;
  • In addition, the devices of this company have another unpleasant feature. A high probability of overheating;
  • Falling or entering water can also turn into a fatal failure in the functioning of the smartphone.
  • A critical system of the system when updating the firmware (software) version of the smartphone;
  • A viral attack, the result of which is the damage to the system files responsible for downloading and working on the phone.

Therefore, below will be listed the main ways to solve the problem of turning on the phone ZTE.

Hard-RESET is the only, today, programmatic way to bring the phone into working condition if it refuses to turn on altogether. We will talk about this method below.

How to fix the problem of turning on the phone ZTE

So, there is the following effective way to independently solve this issue to include ZTE smartphone. It is based on the so.Called “Hard Reset”, that is, the complete removal of all user data on the smartphone, as well as the discharge of all settings on it to factory. This procedure helps to fix a huge number of programmatic errors, so you should try to use this method. For its implementation on the ZTE smartphone, you need:

This is how one of the ZTE models looks in a disassembled state. Here you can see how you can remove the battery from the ZTE phone.

This is the user control panel of a smartphone. To clean all the data and reset the device settings, click on Wipe Data/Factory Reset (you need to click on the power button to confirm the choice)

User data purification window. Here we must click on “Yes- Delete All User Data”

The final window “Hard Reset”, which is similar to the starting. After the procedure for resetting the smartphone settings to factory and removing all the data, select the “Reboot System Now” item to reboot the device.

Before this procedure, do not forget to make backup copies of the files contained on the flash card and transfer them to another device. Hard Reset involves removing absolutely everything that was contained on the phone, including the list of saved telephone contacts, the history of calls, SMS and another.

See How to open LOCKED Android phone ZTE Reset. How to reset ZTE Phone to Factory Settings Easy Fix

The method described above is the only one to date if the problem of turning on the ZTE phone arose as a result of a fatal software error. Correction of hardware errors is best entrusted to a specialist. However, if you want to try to eliminate this problem, then you will be useful for you, the guides of various breakdowns leading to the refusal of the smartphone and the methods of eliminating them:

The reasons for the breakdown and why it turns on, but does not load

️️️️ If Android is not loaded on the phone or tablet when it is turned on, or the smartphone on Android starts, but does not go further than the logo screensaver, then the reasons for this may be as follows:

  • Errors when firming the device. These include the installation of inappropriate or damaged assembly, violation of the firmware, nutrition failure and other factors.
  • Lack of memory. The system may not start or due to lack of memory. The decision may be the removal of extra data.
  • Incompatibility with a memory card. If the smartphone turns on, but does not load to the end, try to remove the memory card and try to re.Start the system.
  • Hardware problems that occur after a blow, fall, fluid, exposure to extreme temperature.
  • Damage to the power button or its train, which “closes” the phone and it goes into a cyclic reboot, loading to the logo and then in a circle. We encounter this periodically and can only be diagnosed in the service center.

Before trying to eliminate the problem of Android, it is necessary to understand why the system does not load.

Second phase. Restarting the system.

Hard reset to factory settings. The thing is universal, but if the list of contacts or some data on your ZTE is very important for you, I recommend contacting the ZTE service center, where experienced specialists will be able to help you and avoid loss of information.

To conduct this operation, you need to start the smartphone by simultaneously squeezing the keys of sound changes and the power button. Depending on the firmware of your ZTE, try several combinations: sound, sound., Both keys of the sound change The inclusion key in any of them is necessary by default.

Next, just select Reboot in the menu that appears.

It was not possible to call the menu or the phone does not want to respond to any buttons at all. It means a mechanical question and you need to contact the specialists of the repair service, since most likely you need to replace the components, and it is better to entrust this process so as not to cause even more damage to the device.

The method described above is the only one to date if the problem of turning on the ZTE phone arose as a result of a fatal software error. Correction of hardware errors is best entrusted to a specialist. However, if you want to try to eliminate this problem, then you will be useful for you, the guides of various breakdowns leading to the refusal of the smartphone and the methods of eliminating them:

At some point, your ZTE smartphone, despite the legendary reliability of the brand, may let you down and just do not turn on, stopping even responding to the keys. What to do in this case and how to return the performance to your mobile device? This article is devoted to this topic.

Of course, you can immediately contact the service center, but I recommend that you carry out several procedures that will not take much time from you, but at the same time they will be able to reanimate the phone without the help of third.Party specialists.

First, we immediately divide the possible reasons into two global sections. Mechanical and software. You can try to solve the software part on your own. It is more and more complicated if mechanical damage has occurred: pollution of the device, the consequences of contact with water or a simple fall on a solid surface All this may require a mandatory contact at the service center. We will be optimists and first try to figure out what an inexperienced user can do without the use of a soldering iron.

Initial tests. Battery level and battery performance.

The simplest thing you can do. Extract the battery of 10 seconds and put it back.

If this, technically, turns out to be difficult, but you have a set of small caliber screwdrivers and a hair dryer at hand. You can still carry out this procedure, the main thing is to keep in mind that in models where there is no fast replacement of batteries, it can be attached to bilateral tape and its extraction will require additional heating with warm air. Take your time when using it, it is better to spend an extra ten minutes than to melt some important component and go bankrupt to replace it.

An important point. Bloating of the battery definitely says about the need to replace it. Do not try to operate the device with such a technical problem, this can lead to a sad consequence. But, I must say that the ZTE smartphones, a similar situation is extremely rare

If the phone still does not start, try to turn on the device when directly connecting to the power grid with the extracted battery (since its breakdown may not be obvious).

If all these actions did not lead to the desired result, we will move on to the second point, but you must understand that this will entail a loss of data, if you have not previously saved them on the card or did not make a backup in the cloud service.

Charging is broken

Of course, it is necessary to check the operability of the charger itself, its malfunction is also a common reason for why ZTE Blade L2 does not turn on. It’s easy to check, you need another charging, and if the current has gone, then your charger should be replaced immediately.

blade, phone, does, turn

It also happens that the smartphone does not turn on, because it is simply not turned off, but depends. In this case, the battery excavation for a few seconds can help. This can revive your device. Of course, the gadget can have a structure with a non.Butraea, but then the smartphone should have a small hole for forced shutdown or rebooting.

You are looking for a way to make your ZTE faster? You want to clear all the data on ZTE before selling it to someone else? This is what you need is ZTE settings reset. What is it? The factory reboot is an operation that deleys all the data (including settings, applications, calendars, images, etc. D.) On ZTE Blade and returns the default settings that make your device as if it comes directly from the manufacturer. When you need to perform such an operation? When you need your ZTE to work faster when there are some difficulties in the operation of the operating system. Here’s how to make a ZTE reset.

Soft factory reset and hard factory reset are two methods that you can use for the factory reset of your ZTE, and return the phone setting up so, it will be like new. Perhaps you want to drop protection from the phone, because you forgot the screen lock password. Or do you want to restore factory settings using a hard discharge of phone. Before rebooting ZMAX 2, I suggest you first try to make a soft reset ZTE. Wallpaper on Android.

Easy soft reset of ZTE ZMAX 2. Follow the following steps:

Click “Settings” “Privacy”.

Touch the phone. Check, delete the SD card if you want to remove the memory card.

Wait a few seconds, your phone will be automatically rebooted and ZTE reset will be completed. If you see that your problem is still not fixed, you can try to perform a hard reset of ZTE phone.

ZTE BLADE A6 does not turn on

Modern smartphones, even with the most careful handling, can fail. Often they arise due to violations in the operation of the operating room, however, mechanical damage can make themselves felt. If the phone does not turn on, then you do not need to rush to contact the repair. Before you should perform several simple and safe actions that can help reanimate your favorite gadget.

blade, phone, does, turn

Why is ZTE BLADE A6 not turn on

There are many reasons for violation of the stable operation of the device. Often problems arise against the background of everyday use. According to the masters and representatives of the manufacturers of the devices, the failures when turning on can be associated with the following events:

  • After updating the operating room, any system files were installed with errors;
  • The device stopped loading due to viruses that got with applications installed not from the Play Market;
  • After falling onto the hard surface, the display or battery train disconnected;
  • The USB connector was clogged or, due to moisture getting on the contacts, small, but harmful spots of rust appeared.

It is worth noting immediately: to cope with mechanical damage yourself is not easy. During the home repairs, you can involuntarily break any compounds, thereby making a smartphone with a non-combination. If the proposed methods do not give a positive result, then it is recommended to contact a proven SC for diagnosis and repair.

Forced restarting ZTE BLADE A6

First, consider several methods related to recovery through the recovery mode. It will turn into it if the gadget is charged by more than 15%. At the same time, by connecting the charger, you can verify the integrity of the screen and the operability of the USB-separation.

So, if the phone responded to connect the charging, displayed the battery replenishment process, then after reaching a suitable level, you can proceed to such manipulations:

  • Squeeze the power buttons and volume buttons at the same time. Keep them so you should do not vibrate the phone. The bootable screensaver will appear and vibration will follow it, then the power button can be released. Important: sometimes a combination with a volume reduction button is triggered, not an increase.
  • In the menu that opens, select “Reboot to System” (in some versions. “Reboot System Now”).

The device should immediately go to the reboot, which will follow the standard loading Android. By the way, if the gadget is not charged, it is recommended to try other USB cables and charger devices. It is possible that the problem lies precisely in them, and the phone simply discharged.

Reset to factory settings

After the actions described above, several options for the development of events are possible. In addition to the usual rebooting and turning on, the phone may turn off or hang back on the screensaver. You should not be too upset because of this, because the manipulations done helped to verify the performance of a number of important functions and systems.

Rebooting through the recovery is an option suitable for situations in which the firmware received minor failures that were eliminated by themselves. If the violation in the operating room is much more serious (for example, after firmware with errors), then you will have to reset to the factory parameters. It is important to consider: with such actions, all files are deleted from the device’s memory, including photos, videos and music.

The device should go for a reboot. It can continue much longer than usual (up to 10-15 minutes), after which you will have to perform the initial setting.

Additional methods

What to do if the methods described above did not help? The gadget unexpectedly turned off, stopped responding to the pressing of the power button or charged. With a high probability the problem lies in mechanical damage. If earlier he fell or hit the water, then it makes sense to contact the service center for diagnosis. Another probable reason is the failure of the battery. The main feature is a quick category from 100 to 0 percent until the malfunction is detected. For smartphones with removable batteries, you can try to buy a similar one and just replace. If the case is whole, then without intervention of masters you can’t do without.

Charging is broken

Of course, it is necessary to check the operability of the charger itself, its malfunction is also a common reason for why ZTE Blade L2 does not turn on. It’s easy to check, you need another charging, and if the current has gone, then your charger should be replaced immediately.

It also happens that the smartphone does not turn on, because it is simply not turned off, but depends. In this case, the battery excavation for a few seconds can help. This can revive your device. Of course, the gadget can have a structure with a non.Butraea, but then the smartphone should have a small hole for forced shutdown or rebooting.

If your smartphone turns on the screen, but does not launch the operating system, perhaps a software failure has violated the structure of the OS or the system file is damaged. In this case, the settings are reset to factory.