Xiaomi redmi note 4 does not turn on

Xiaomi Redmi note 7 shut down and won’t turn on. Solution

xiaomi, redmi, note, does, turn

Xiaomi Mi 8 turned off and won’t turn on

The method that helped to restore the work of Xiaomi Redmi note 4

Xiaomi smartphones have software installed. which, if it fails, prevents the device from turning on.

Software problems if Xiaomi Redmi note 4 has turned off and won’t turn on:

  • Failure of the operating system installed in the smartphone.
  • Installing TWRP.
  • If the smartphone turns off while installing the operating system or other software.
  • Resetting all machine settings.

To solve such problems, it is possible to perform a complete reboot of the phone. To do this, use the power button of the device and hold it for about 10 seconds. The smartphone will vibrate and the screen will turn on. Sign up for Apple repair, phone firmware, by our specialists, at low prices, now click here for repair!

Express repair of your Xiaomi

Why the power button does not work on Xiaomi Redmi NOTE 4?

If you notice that the Power button in Xiaomi does not work correctly, you need to identify the cause of the malfunction and fix it.

  • Reboot your phone

If the power button on the Xiaomi Redmi NOTE 4 phone does not work, the problem is often temporary, and currently the power button does not work due to a minor malfunction. When you notice that the power button is not working on your phone, you need to restart your phone from scratch. If it has a removable battery, it will take a few seconds. Then press the power button to see if it works or not.

In another scenario, if the button doesn’t work at all and your phone has a non-removable battery, just discharge the phone before turning it off. Another way. connect it to a PC, from where you can instruct the phone to reboot through recovery mode or, if available, directly through the “Power OFF” option, if available.

  • Checking for debris

Debris such as dust particles, the smallest piece of paper, or anything stuck between the button and the conductive plate underneath is preventing the button from working properly. You can press a button or grab a vacuum cleaner to suck up anything that might get stuck between the buttons, however I don’t recommend removing the button and then putting it back in, this can be fatal. Take a sharp piece of paper or something sharp and thin enough to pass between the buttons to draw out dust particles. Rough handling can damage the equipment itself, therefore precautions are required. It is not recommended to use this method without experience. For the complete safety of your Xiaomi phone, it is recommended that you take your phone to a service center for phone repair.

  • Choosing third party apps as an alternative

Volume button to unlock

This is one of the software alternatives that you can use to replace the physical power button under certain conditions. Once you download and install it, it will allow you to customize its settings. To lock your phone, simply drag the notification bar down and press the on / off button. To unlock your phone, tap the screen and it will come to life again. What else? You can customize the options available in the app to perform various functions using on-screen buttons, touches, gestures, and more.

It is an intuitive application that allows the user to use the proximity sensor located next to the front camera. Allows you to automatically turn off and on your phone with one touch. It can detect the presence and time of power-on delay, thus avoiding accidental power-on. You can customize it for all Xiaomi devices as it is a universally compatible Android app. It only takes up 5MB of RAM, making it lightweight and fast enough.

Proximity sensors are an alternative to using the physical power button. The Proximity Actions app works on the same principle as these sensors, which can monitor the phone’s gesture behavior. You can configure it on Xiaomi Redmi NOTE 4 devices in case the power button is not working, which will allow you to use gestures to turn the phone on or off. This will completely replace the Power button. There are many other settings available that you can customize according to your account, such as separate delay times for locking and unlocking your phone, and turning your phone on and off with gestures or touches. The app is lightweight so it won’t use more memory than just a few MB, it makes it simple, fast and reliable.

It doesn’t matter if your power button on Xiaomi Redmi NOTE 4 phone is not working or you don’t want to press this button when you lock or unlock the screen, you can use alternatives to do the same with ease. Gravity Screen uses an accelerometer sensor that detects movement and keeps the phone off when it detects any obstacle, such as whether it is in a or stored at a desk, etc. As soon as the user picks it up, it turns on the power automatically without even making any necessary gestures.

  • Visit Xiaomi Service Center

No doubt the power button is important because you can’t keep your phone on at all times. The Power button has its pros and cons, making it an important aspect of smartphone hardware and therefore needs fixing. If you like to press the actual button on top of a timely function to lock and unlock or restart your phone, you can try the first two methods, but what if it fails, what can you do to get rid of it?

Well, the answer. just go to the service center, report that the power button of the Xiaomi Redmi NOTE 4 phone does not work. Technicians will handle the problem and deliver your phone with a fixed or replaced button at minimal cost within 3-4 business days, depending on which country you live in. It is recommended that you contact an authorized center as it retains the warranty provided by the smartphone manufacturer, which covers certain aspects and costs of damage or leakage during the warranty period. This means that if the problem with the Xiaomi power button does not work in the covered warranty list, you will fix it even for free. over, if you plan to keep the warranty period unchanged, you will have to report any problem to an authorized center if you do not want to cancel it.

Probable causes

The first question that every user of the problem device is trying to figure out for himself is why the phone stopped turning on and does not respond to pressing the power button. The main options are:

  • the battery has sat down;
  • the system is frozen;
  • the power button itself has broken;
  • something is wrong with the firmware;
  • the module, a separate component (for example, a battery) is not working correctly;
  • water got inside the phone;
  • the device fell from a height, got scratches, dents, other mechanical defects.

That is, there are situations when it will be easy to cope on your own, in the rest you will have to buy a new phone or go to a service for comprehensive diagnostics and repairs. Remember, after which the smartphone stopped working correctly. perhaps it was recently updated, fell on the ground or a tile.

An almost new device purchased from an unverified location is highly likely to be buggy due to poor quality or because it is fake. Firmware, programs, loops can be faulty, that is, there are many probable reasons.

other methods

If your Xiaomi phone does not turn on, try this algorithm. The circuit is simple, efficient, and usually works. It helps to return the phone to working condition in half of the cases:

  • Put your smartphone to charge. Probably, the black screen is a consequence of a complete discharge, and the situation will be corrected without unnecessary complicated actions. Charge for at least an hour, start up by holding down the power button for a few seconds and holding it.
  • If all else fails, check the charger. it might be a problem and need a replacement. An easy way to test is to plug in another device and see if it works or not. When only the red indicator button is blinking, simultaneously hold down the volume controls, wait for the vibration to appear and hold down Power.
  • Another scheme of action is to remove the back cover, get out the battery. If the battery is removable, everything is simple, if not, hold down the power button and hold it for up to 30 seconds. It does not always help, but often. when problems arose as a result of a software failure.
  • The next step is to start Recovery mode by holding Power and the volume higher. When the picture appears on the screen, remove your finger from the main power key while continuing to hold the volume up. Next, specify the language, tap the shutdown, reboot by pressing Reboot. The smartphone will have to turn on if it is serviceable and there are no problems with the firmware. Sometimes such a glitch with the hardware is not associated. the phones turn off even with a normal battery charge, refusing to work when turned on with Power.
  • When all the actions have been done, but the power has not occurred, reset the data in the Recovery menu. The information will be deleted, but the smartphone will most likely not work. Make backups first. To reset, select Wipe Reset, then Wipe all data and tap Yes.
  • If the device turns on, the screen is on, but the download does not proceed further, or the phone turns off immediately, a flashing will help. Try reinstalling the software yourself using Mi Flash Pro. After a successful update, the smartphone should work without failures and lags. But situations, on the contrary, are not uncommon. old functions disappear or fail, the device slows down a lot. With beta tests, such troubles are not uncommon, the firmware rollback almost always helps to solve the problem.

Sometimes Xiaomi, when turning on, restarting, hangs on the corporate logo. In most cases, the state is interrupted by simultaneously holding down the volume up / down and power buttons. After the start of vibration, the buttons must be released immediately.

Freeze device

This includes various kinds of glitches after flashing or a sudden shutdown. If you are sure that the device has enough power to start, but pressing the Power key does nothing, try starting the device in Recovery mode. To do this, simultaneously press the volume up key and Power, holding them for a while.

If an image appears on the screen, consider half the job done. You can try removing your fingers from the buttons. If the smartphone boots up, most likely it was a banal glitch. If not and the screensaver is constantly hanging, restart it (press Power and hold until reboot), then do the same, but as soon as the picture appears, remove your finger from the power button, but hold the volume up key. This will launch Recovery Mode.

Then. Power Off to turn off the device. Alternatively, you can select Reboot to reboot.

In any case, after that the smartphone should boot up. If this does not happen, while the recovery menu is loaded, you can try to reset the data. Yes, all information on the device, alas, will be deleted, but there is a chance to revive the smartphone. To do this, after selecting English, click Wipe Reset.

Confirm the deletion of all data by selecting Yes.

Wait for the system to be restored to its original state and select Reboot.

You can try to recover, for which use the instructions from the w3bsit3-dns.com forum specifically for your Xiaomi smartphone.

First aid measures

Let’s see what to do if Xiaomi phone won’t turn on. The procedure depends largely on what preceded the breakdown.

A software glitch has occurred

If the smartphone “freezes” when the screen is inactive and does not turn off, temporarily remove the battery. This often helps, but the problem is that most modern smartphones have a monolithic design. that is, the battery will not work.

Hold down the power key for 10 seconds. if everything is fine with the firmware, the phone will vibrate, then start the operating system. Software failures often occur against the background of a flashing done by a non-professional. So do not risk the device and do not break it with inept actions. Not confident in your abilities. contact the service center.

You can risk reanimating the device in case of a software glitch by simultaneously holding down the power and volume down buttons. If everything goes as it should, the Fastboot mode will load. a splash screen will appear on the screen. From Fastboot, through the “power” button, do the usual boot of the operating system. If there is no response, we can talk about the damage of the firmware files (a flashing is done). Sometimes it helps to rollback the firmware, which is possible with and without ROOT rights. Since there are different options, you will choose the best one for yourself. Manipulations are not easy, questions may arise. Methods:

  • Install the old MIUI firmware with the previously locked bootloader. from a technical point of view, it is almost impossible to perform the operation. Requires a wipe of information via Recovery, with a locked bootloader, the mode does not turn on.
  • On Developer firmware, rollbacks are possible, and version restrictions are not provided. these can be developer, global, spare Chinese versions. What you should definitely not do is jump from global to developer.
  • Downloading new firmware to the phone during the next update via the Recovery software is also possible. Turn on the Install update zip item in working mode, download the firmware and make a Reboot. As a rule, these actions are enough.

Remember. if you have questions, it is better to ask them on the forum or contact the service, but do not break your smartphone. Self-repair recoveries can be very expensive.

Mechanical problems, moisture ingress into the device

In such cases, we can recommend contacting the service center for help. Few can solve such problems on their own.

Even a smartphone as good as Xiaomi Redmi Note 4X has drawbacks. For example, some of its owners complain that from time to time the phone refuses to turn on.

Most often, the Xiaomi Redmi Note 4X phone does not turn on after unsuccessful flashing. This usually applies to the transitions from MIUI China to MIUI Global, as well as situations when the so-called “custom” are installed (that is, graphic shells released by non-Xiaomi).

To successfully complete the installation of the “non-native” firmware and successfully turn on the phone, you must flash in accordance with the following recommendations:

  • Charge your smartphone 100%. As a rule, it is recommended to charge the device at 50%, but a full charge is the more reliable option;
  • Check that the drivers are installed specifically for your version of the Redmi Note 4X processor, as it can be either with a MediaTek or Snapdragon chip;
  • Check if the USB cable is secure. Testing consists not only in the connection, but also in the reliability of the wire, since at the slightest movement, faulty cables immediately interrupt the connection between the phone and the PC, and therefore disrupt the firmware process;
  • Restart your computer and disable your antivirus software. The latter often block important components of utilities for firmware, so it is worth temporarily deactivating them.

Sometimes Redmi Note 4x will not turn on even after updating the firmware using standard in-system methods. In such cases, the malfunction is eliminated with a little trick:

  • Hold down the combination of the power and volume down buttons (on some models, a long press of one power button is enough);
  • Wait for the Fastboot screen to appear (with the MIUI logo);
  • Press the power button and hold until a slight vibration appears.

Power button does not work

Yes, it also happens: the smartphone has turned off, but you cannot turn it on, because the Power key does not work. But in fact, Android has something provided for such cases. Take the charger, connect your smartphone to it, hold down the volume up key, plug the charger into an outlet. If the screen turns on, fine, after that the recovery menu will be loaded. In it, select English, and then. Reboot.

The smartphone will be restarted in normal mode.

Repair from 0 to 300 rubles

  • the charger plug is out of order
  • USB cable problems.

In this case, the phone is badly discharged and the fact that it is charging does not change the matter. Try using a different charger, or you can visit us at 28 Komsomolsky Prospect, in the Frunzenskaya metro building. We will put your Xiaomi Redmi Note 4 on charge and, if things go well, you can purchase a new USB adapter or USB cable from us.

Also, the phone may not turn on due to the fact that it is heavily discharged. In this case, you have to keep the device on charge for a long time. it needs to replenish the overused resource. How long it takes to recharge before it turns on depends on the mains supply. For example, a 3.7v socket will fill up the missing energy faster than a 3.1v socket. On average, Xiaomi Redmi Note 4 comes to life within a few hours, but it may take up to several days.

Xiaomi Redmi Note 4 does not turn on

Repair for 1900 rubles

It happens that the battery is discharged to zero and will not return to work without a special electrical impulse. But this requires special equipment. In addition, there is an opinion that a battery “resurrected” by an impulse will still not work for a long time. Therefore, it makes sense to simply replace it. Replacing the battery will cost 1900 rubles.

It is difficult to diagnose such problems at home. and why? We offer you free diagnostics, regardless of whether you leave your phone with us for repairs, or pick up.

Diagnostics and repairs are carried out on special equipment, so we can guarantee high quality and speed of work.

How to fix Redmi Note 4 Not Turning On After Dropping from !!!

Repairs for 1300

The charging connector may wear out, become loose in the device, or stop charging the phone for other reasons. Its replacement will cost 1,500 rubles.

Repair for 1500

On and off button. erased from the inside, because of which it ceases to reach for the start of the on / off mechanism of the device.

By brands:

All are inclusive of work and spare parts

Name of service Cost, rub Timing, min Warranty, days
Replacing the USB adapter From 300 five 90
Replacing the USB cable From 200 five 90
Replacing the charging connector 1300 From 50 90
Replacing the power button 1500 From 40 90
Battery replacement 1900 From 50 90

Separate price

The saddest reason a phone might not turn on is because the fundamentals of any phone break down. motherboard (printed circuit board). Such repair depends on many factors: the policy of suppliers, the phone itself, the amount of its memory, etc.

Express repair of your Xiaomi

Xiaomi Redmi NOTE 4 won’t turn on or charge.

There are many reasons why Xiaomi won’t turn on or charge. Most often, a malfunction of an actively used device occurs as a result of a broken charging connector due to active use. As a rule, a part cannot be repaired, but immediately requires replacement with a new component.

Xiaomi does not charge more often for the following reasons:

a large amount of moisture got into the device, which negatively affected the operation of the connectors; periodic mechanical damage leads to deformation of the socket. As a result, the plug enters the connector with an offset, or it is completely impossible to insert it; bent contact pads; dirt or dust has entered; if foreign objects get in, fragile parts that cannot be restored are damaged; assembly defect.

If the Xiaomi phone does not charge, you should not rush and immediately start disassembling. It is preliminarily recommended to conduct an independent diagnosis. It is important to note that a connector malfunction is rarely agreed to be repaired under warranty. In practice, most often, experts establish mechanical damage and other causes associated with improper operation of the device.

The charging socket can break for many reasons. First of all, it is worth remembering whether the phone fell or received serious blows that could lead to a breakdown. Malfunctions can also occur if the cord is abruptly pulled out of the device. If Xiaomi Redmi NOTE 4 does not turn on and does not charge, it is recommended to carry out a number of diagnostic measures in advance:

inspect the phone for integrity, try to make a connection using a USB cable to a computer or other power supply. If charging has gone, then the problem is a malfunction of the adapter; if possible, disassemble the phone, remove the battery, wipe all contacts and outputs. Inspect for faulty contacts. Next, you need to put the phone back together and check the charging operation again; conduct an external inspection of the connector for broken or bent contacts, possible ingress of third-party objects or a large amount of moisture.

If a malfunction was identified during the check, in this case, you can proceed to the preparatory measures for repair.

Any replacement or repair or equipment is impossible without the use of special tools, therefore it is recommended to prepare the following:

a set with screwdrivers or one Phillips; a scalpel for stripping the remaining glue from the wires; tweezers for fixing wires; soldering iron; plastic spatula; glasses for magnification.

To make it easier to work, you can use an additional holder for a fragile motherboard.

Xiaomi charging connector replacement

If Xiaomi does not turn on or charge, you can proceed to the next replacement instructions:

remove the SIM card tray. Using a screwdriver, unscrew the screws on the sides of the power connector; proceed to removing the rear housing cover. In order not to cause serious mechanical damage to the cable and buttons, perform this action with the utmost care and use a plastic spatula as a tool. Since the fingerprint sensor is on the surface of the screen, the back cover is easy to remove; disconnect the loop from the battery; in the lower part of the case there is an additional board for the system connector, microphone and antenna, covered with a special cover for the speaker; the additional board is removed by unscrewing the screws securing the speaker module. Use a Phillips screwdriver as a tool; disconnect the board-to-board ribbon cable and antenna cable. Take tweezers and pull out the board; Install a new connector and secure it with the plastic clips. It is important to ensure that the connector is installed without changing the angle or inclination; connect the battery loop back; check the operation of the connector. To do this, just connect the phone to the charger and check if the indicator appears; Since the adhesive around the entire perimeter of the smartphone is not suitable for reuse, you need to take a scalpel or other metal object for cleaning, and then apply a new compound. This will create the tightness of the structure; reassemble in reverse order.

Once the device is fully assembled, it is recommended to re-operate by plugging in the USB power cord. Also, after reassembly, it is worth checking the normal operation of the speaker and microphone.

What to do if urgent repair of Xiaomi Redmi NOTE 4 is impossible

Sometimes there are situations when a person does not have enough time to immediately carry out repairs. In this case, there is a temporary solution to the current situation. The process consists in finding the optimal position of the USB wire, at which the failed contacts will begin to charge the battery.

The procedure is carried out in the following sequence: the plug is inserted into the broken socket, and the adapter must be connected to the mains supply; press the smartphone with a heavy book or other objects to fix its position; gradually and smoothly move the plug until an indicator appears indicating charging. It is important to perform all actions gradually, so as not to cause even greater damage or short circuit of contacts; as soon as the position is found, it remains to fix the wire in this position with a heavy object.

However, such a solution is only a temporary way out. In order not to harm the further operation of the device, it is recommended to replace it as soon as possible.

If the device has a removable battery, then a universal charger can be used, but its cost is much higher and it is not suitable for cast phones. Therefore, the alternative may not be used in every case. Failure of the charging connector is a fairly common problem in modern smartphones and not only for Xiaomi. This is due to the fragile design of this element, therefore, if handled carelessly, it becomes unusable. You can replace it yourself, just follow the instructions above.

Freeze device

This includes various kinds of glitches after flashing or a sudden shutdown. If you are sure that the device has enough power to start, but pressing the Power key does nothing, try starting the device in Recovery mode. To do this, simultaneously press the volume up key and Power, holding them for a while.

If an image appears on the screen, consider half the job done. You can try removing your fingers from the buttons. If the smartphone boots up, most likely it was a banal glitch. If not and the screensaver is constantly hanging, restart it (press Power and hold until reboot), then do the same, but as soon as the picture appears, remove your finger from the power button, but hold the volume up key. This will launch Recovery Mode.

Then. Power Off to turn off the device. Alternatively, you can select Reboot to reboot.

In any case, after that the smartphone should boot up. If this does not happen, while the recovery menu is loaded, you can try to reset the data. Yes, all information on the device, alas, will be deleted, but there is a chance to revive the smartphone. To do this, after selecting English, click Wipe Reset.

Confirm the deletion of all data by selecting Yes.

Wait for the system to be restored to its original state and select Reboot.

You can try to recover, for which use the instructions from the w3bsit3-dns.com forum specifically for your Xiaomi smartphone.

Why Xiaomi does not turn on and what to do?

One day, the Xiaomi smartphone may stop turning on. If you believe the users, this happens under various circumstances: after updating, after discharging, after charging, sometimes the device simply turns off for no apparent reason and does not turn on, hangs on the screen saver Also, the device often signals a problem with a white or red indicator. What is the reason, what to do in such cases? Let’s figure it out.

Power button does not work

Yes, it also happens: the smartphone has turned off, but you cannot turn it on, because the Power key does not work. But in fact, Android has something provided for such cases. Take the charger, connect your smartphone to it, hold down the volume up key, plug the charger into an outlet. If the screen turns on, fine, after that the recovery menu will be loaded. In it, select English, and then. Reboot.

The smartphone will be restarted in normal mode.

Complete discharge of the device

Sometimes the smartphone is completely discharged, which can be indicated by a red light. When you press the power key, of course, nothing happens, since the device simply does not have enough energy to start. There is only one way out. put the smartphone on charge and charge for a while, along the way trying to turn it on.

There is one point: if the charger or USB cable is damaged, the smartphone will not charge. Therefore, it is advisable to be exactly confident in their performance.

Another nuance: hold the power button for about 20-30 seconds, this also sometimes allows you to revive the device.

Mechanical problems, moisture ingress into the device

In such cases, we can recommend contacting the service center for help. Few can solve such problems on their own.

What to do if Xiaomi Redmi Note 4x phone does not turn on?

In this article, we will tell you what to do if the Xiaomi Redmi Note 4x phone does not turn on. As a rule, such a problem does not mean a hardware failure at all. in most cases, the failure can be eliminated without resorting to the services of a service center.

Most often, Xiaomi Redmi Note 4X does not turn on after unsuccessful firmware. This usually applies to the transitions from MIUI China to MIUI Global, as well as situations when the so-called “custom” are installed (that is, graphic shells released by non-Xiaomi).

Sometimes Redmi Note 4x does not turn on even after updating the firmware using standard in-system methods.

Tips for Correct Firmware

So that after flashing there are no problems with turning on Xiaomi, flashing your smartphone taking into account the following recommendations:

Ремонт Xiaomi Redmi Note 4 не включается / repairs does not turn on

  • Charge your smartphone 100%. As a rule, it is recommended to charge the device at 50%, but a full charge is the more reliable option;
  • Check that the drivers are installed specifically for your version of the Redmi Note 4X processor, as it can be either with a MediaTek or Snapdragon chip;
  • Check if the USB cable is secure. Testing consists not only in the connection, but also in the reliability of the wire, since at the slightest movement, faulty cables immediately interrupt the connection between the phone and the PC, and therefore disrupt the firmware process;
  • Restart your computer and disable your antivirus software. The latter often block important components of utilities for firmware, so it is worth temporarily deactivating them.

How to turn on Xiaomi?

In such cases, the malfunction is eliminated with a little trick:

  • Hold down the combination of the power and volume down buttons (on some models, a long press of one power button is enough);
  • Wait for the Fastboot screen to appear (with the MIUI logo);
  • Press the power button and hold until a slight vibration appears.

What other reasons could there be?

The smartphone may not turn on even when exposed to low temperatures (for example, when talking for a long time in the cold). In this case, you will need to carry out the procedure with Fastboot, discussed above, pre-warming the device in a warm room.

It is worth saying that this method is universal, therefore it can be suitable for various situations. If neither flashing nor manipulating Fastboot mode helps, it is recommended to contact the service center, since the problem most likely lies in a hardware malfunction of the Redmi Note 4x.