Wireless headphones Xiaomi Mi how to use

Instructions in Russian I7 TWS

User Manual Bluetooth Stereo Earbuds with Mic I7 TWS

How many times can Xiaomi Mi AirDots be recharged using the portable charging case?

The operating time of Xiaomi earbuds is 4 hours, while the charger can charge the earbuds twice, so the total battery life of the earbuds can reach 12 hours.

Pairing Xiaomi Mi AirDots with your device via Bluetooth

Disable Bluetooth on your smartphone.

Place both Xiaomi AirDots earbuds in the charger.

Remove both earbuds from the charger case and simultaneously press and hold their touchpads located on the outside of each earbud on the left and right earbuds at the same time. The white indicators will light up. synchronization of headphones with each other. After that, only the right earbud will start flashing. this means that the earbuds are available for pairing with your device.

Turn on Bluetooth on your smartphone. Mi AirDots BASIC_R will appear in the list of visible devices. Pair with this device

If the connection fails, return the earbuds to the charger and repeat the above steps.

After the first connection, the earbuds will be automatically connected to the last paired device (Bluetooth must be on). If automatic connection fails, use manual mode.

It is possible to connect the headphones separately and use them as a Bluetooth headset on different devices. In this case, Mi AirDots BASIC_R or Mi AirDots BASIC_L, respectively, will be displayed in the list of paired Bluetooth devices, depending on the connected headphone. The method of connecting the headphones one at a time is the same as described above, but only hold the touchpad of one of the headphones during pairing.

Frequently asked Questions

Is the charging case equipped with a magnetic headphone holder?

Yes. When the earbuds are inserted into the cells of the portable charging case, they are magnetized to prevent accidental dropping of the earbuds.

Bluetooth stereo headphones with microphone Xiaomi Mi AirDots

Please read the operating instructions before using them and save them in case you have any questions about servicing the device. Xiaomi Mi AirDots are wireless headphones with microphone. Continuous work time up to 4 hours.

A warning When removing the Xiaomi AirDots Bluetooth headset from the charger, it will automatically turn on and automatically connect to the previously paired device. When you put the headphones back into the cells of the charging case, the headset automatically turns off and the charging process starts.

Off state: press and hold the touch pad for 1 second to turn on the headset; On state: press and hold the touchpad for 5 seconds to turn off the headset.

JBL HARMAN T450BT manual

JBL T450BT Bluetooth Stereo Headset User Manual

Step-by-step guide to connect Xiaomi Mi sports bluetooth headset to smartphone

What to do if Xiaomi does not see the headphones

Most often, the error lies in the software. For example, after system updates, this is quite common. Then you should roll back to the previous version or reset to factory settings.

If there are problems with the wiring, then it is worth checking and thoroughly cleaning the connectors. And also pay attention to the serviceability of the wire and the contacts themselves.

In most cases, the headphones will not connect if the setting is incorrectly made by the user. So please read each point of the manual carefully before contacting the service center.

General terms of use

After the first connection to a Xiaomi smartphone, pairing occurs automatically. The device detects the headset by itself, and the playback of audio files starts immediately. But Bluetooth, of course, must be activated in advance on the phone.

Solving common problems

Got a high-quality headset, follow the instructions clearly, but have certain problems with the headphones? Don’t worry, problems can be easily resolved by reading our tips and tricks.

comparison table

Bluetooth headset Wired headset
Benefits: Flaws: Benefits: Flaws:
Mobility. Your movements are not constrained. No need to carry your phone with you everywhere.

You need a power source. Bluetooth headsets drain pretty quickly. Don’t worry about charging. You can listen to music and chat without time limit. The presence of wires. With active activities, wires are a big hindrance, you also need to carry your phone with you. Compactness. Take a closer look at the excellent minimalist Xiaomi AirDots headphones. This is a great budget alternative to expensive gadgets from Apple. Intricate connection. It may take a while to sync the earbuds to your phone for the first time. Beginners are often confused with the sequence of actions. Just a connection. Pairing is as simple as possible: just plug the wire into the USB connector. and you’re done. Broken wires. If the headset is used for a long time, the cable may break, break or crack. Additional funds will be needed to replace it. Interesting design. and more wireless models with completely different looks are entering the modern market. Price. A high-quality headset with the latest features comes at a premium. Availability. For several thousand you can buy excellent headphones with basic functionality. Outdated models. Gradually, wired designs are still fading into the background, supplanted by modern Bluetooth gadgets. Can’t decide on the choice of headphones? Then take a look at a great alternative: wired headphones with Bluetooth connectivity.

Headphone sound is too loud or quiet

We talked about how to increase the volume in headphones on Xiaomi phones in our separate article. A huge number of different methods are presented there, as well as a video instruction and answers to your questions.

wireless, headphones, xiaomi

Don’t know how to connect a Bluetooth headset to Xiaomi? This is done very simply:

First you need to turn on the bluetooth headset (headphones) that you want to sync with your Xiaomi.

We activate bluetooth on the smartphone. To do this, open the notification curtain with a swipe down from the top edge of the screen and find the corresponding icon.

You can also enable it by going to Bluetooth Settings.

Next, you need to go to the list of available devices. To do this, in the notification curtain, press and hold your finger on the Bluetooth icon. You can also go to the list through the settings. In our case, we connected JBL headphones. they were displayed in the list of devices for connection. We tap on them to synchronize with a smartphone.

The device may then ask you for a pairing password. It is usually found in the instruction manual for your device. Also, when connected, you can give the headset access to the contacts list and call log (optional). Click “Accept” and you’re done. the headset is connected.

In the same way, any other Bluetooth devices are connected: keyboards, joysticks, and so on.

Xiaomi Mi bluetooth wireless headphones how to connect

However, despite all the advantages of these headphones, it can be difficult to connect them to a smartphone for the first time. This is because many phones perceive this Xiaomi Mi bluetooth headset as a set of Chinese characters.

In order to avoid problems when connecting the headphones for the first time, it is advisable to do this at home, where there are no other Bluetooth devices. Then nothing will prevent a successful connection.

All about charging Redmi AirDots

To charge the earbuds, you need to place them in a plastic case. Each of the earbuds has its own socket. It will not work to insert the headphones into the case by swapping the right and left positions. As soon as the “ears” are in place, the red indicators will light up. When charging is complete, the LEDs will change color to white.

It will take 1.5-2 hours to fully charge the dots in the case. It may be that on the left earpiece the indicator is white, but on the right it is still red. This is a normal situation, because the right “dots” in a pair is the main one, it discharges faster and needs more time to charge.

The case, since it is a charger, has a built-in battery, and it also needs to be charged. For this, the case has a mini-USB port, into which the corresponding cable is inserted. This cable is not included in the package, so you will have to purchase it separately.

The case also has a status indicator. When charging is required, it turns red, after fully charged (this process takes 2 hours), the color changes to white and the indicator turns off quickly.

Sometimes one or both earbuds cannot be charged. The reason may be trivial. the case battery is discharged. In this case, after being placed in the case, the headphones are not disconnected from the phone, pairing remains even if the case cover is closed. The second reason is the lack of contact between the earphone and the charging pad in the case. Check if you have removed the film from the dots, and also find out why the earphone does not sit completely in its socket. Perhaps the ear cushion or something else is interfering with this. Remove the ear pads and try inserting the headphones into the case without them. The charging problem can be resolved immediately. Then you will have to find new, more suitable silicone tips.

First Steps to Establishing a Smartphone Connection

Step 1. Take both earbuds out of the charging case, they will automatically turn on immediately.

Step 2. Turn on the Bluetooth module on your smartphone. The search starts for nearby wireless devices. The line “Redmi AirDots_R” should appear in the list of found devices. This is the right earpiece, you need to start the connection with it, the left one will connect automatically.

  • If you put the earbuds back in the case, the red indicator will light up. Redmi AirDots will automatically disconnect from the phone.
  • If you take the headphones out of the case again, the white indicator will light up. AirDots will automatically reconnect to the smartphone.

You can connect “dots” via Bluetooth not only to a phone, but also to a PC and a laptop.

It often happens that when pairing, problems arise or after a while one of the headphones begins to lose connection, the sound appears and disappears in it. In any case, you will need to reset the connection. pairing and connecting to a mobile device.

AirDots control with multi-function button

The physical button on each of the earbuds can perform multiple functions.

  • Answer / end / reject incoming call
  • when a call comes in, tap the multifunction button once to answer the call;
  • during a phone call, press the multifunction button to end the connection;
  • when an unwanted call comes in, you can reset it by long pressing the multifunction button.
  • Play / Pause Music

When you are listening to music and want to pause or restart playback, you can perform this control by pressing the multifunction button.

When the headphones are in standby mode, press the multifunction button twice to call the digital assistant.

The phone must support the voice control function, the quick start mode (“wake up” the device) must be activated in the phone settings.

Xiaomi Redmi AirDots support voice control via Xiaoai, Siri and Google Assistant.

Redmi AirDots has support for third-party chat apps and voice input for iOS. Android devices use the built-in microphone by default, through which voice commands and responses from the digital assistant are sent.

Xiaomi Redmi AirDots headphones do not have a volume control function, this setting must be done on a smartphone. By the way, you can use the voice assistant to adjust the sound volume.

Operating instructions for Xiaomi Redmi AirDots wireless headphones

The era of mobile electronics continues to evolve. Today, wireless headphones have deservedly gained great popularity among users. Among the abundance of TWS headphone models on the market, products under the Xiaomi / Redmi brand stand out. It would not be an exaggeration to say that Redmi AirDots are a worthy alternative to expensive “earbuds” produced by Apple, Sony, Samsung and other manufacturers. In some countries they are marketed under the name Mi True Wireless Earbuds Basic, but the model is actually the same.

It is important to remember that great demand has led to the fact that in the same China, clones of Redmi AirDots are produced in large quantities. They are sold at a low price, and the quality of such accessories does not stand up to criticism. Be careful if you are going to buy headphones from Xiaomi for yourself or someone else as a gift.

Below we give detailed instructions for those who have just bought Air Dots, in which we will tell you how to use them.

How to Reset Pairing Redmi AirDots?

Step 1. Hold the multifunction button for 15 seconds until the indicator flashes red and white three times alternately, and then turns off. This will mean that the device was reset successfully.

Step 2. In the list of Bluetooth connections on your smartphone, find the entry “Redmi AirDots_R” and delete it. Then complete the connection reset procedure.

What’s in the box?

New Redmi Airdots are packed in a small oblong box made of blue cardboard. The box contains:

  • Charging case.
  • Headphones (in case) with M-size ear pads.
  • Interchangeable ear pads in sizes “S” and “L”.
  • Instruction manual in Chinese. Instructions in Russian are not included.

We recommend charging the case and wireless headphones before using for the first time. Remove the films from the case and from the contacts on the inserts (there can be only one of them).

Redmi AirDots Headset Control Apps

Also in the application you can see information about the battery consumption. In general, this application is more suitable for Xiaomi headphone models with touch controls (AirDots Pro, AirDots Youth Edition). Only one thing works on Redmi AirDots. viewing information about the battery, you will not be able to program the buttons. There is another application for this called MacroDroid.

MacroDroid can be found on Google Play, it only works on Android phones. Unfortunately, there is no version of this app for iOS.

  • Open the application.
  • Create a new macro (red square with “plus”. “Add macro”).
  • For a trigger, select the media button: “Data input” “Media button” “Long press”. Check “Long press”, because if you select “Double press”, switching tracks will not work.
  • Open the “Actions” menu, then “Media” “Media control” “Emulate the media button” “Next”. Here you select your application from which you listen to music (Yandex Music, Google Play Music, VLC, YouTube, etc.).
  • Then goes to the section “Restrictions”. “Communication” Bluetooth status “Device connected”. Choose “Redmi AirDots_R”.
  • Save the macro.

That’s all. Button setup is complete, headphones can be used.

Problems connecting to the phone

Despite the simplicity of the connection, an unprepared user may encounter some problems. Almost always, the situation is resolved after performing simple actions, which are described in detail below.

If Xiaomi wireless headphones do not connect to the phone, then most likely the problem lies not in the headset itself, but in a system error of the smartphone. We suggest that you familiarize yourself with the main options for eliminating the failure:

  • Try restarting your smartphone after turning off Bluetooth. As practice shows, after such an action, many errors disappear for an unknown reason.
  • Temporarily disconnect the headphones by holding your finger on the touch or mechanical button for 4-5 seconds. Please note that it is necessary not only to put the headset into standby mode, but to turn it off completely.
  • Try connecting the wireless headphones to another smartphone. If the task is feasible, then the problem is definitely in the phone.

What you can definitely ignore when looking for a solution to a problem is the Bluetooth version. If the headphones work with Bluetooth 5.0, and the phone only supports Bluetooth 4.0, then there can be no barriers to connection. Limitations can only be imposed on the uninterrupted range of the headset.

How to set up Xiaomi wireless headphones

Before you start connecting your Xiaomi headphones to your phone, you need to make sure the headset is fully charged. To do this, just look at the color of the indicator located on each of the headphones. Usually, if the LED blinks blue, then the battery is fully charged, if red. on the contrary, it is discharged.

Xiaomi produces many varieties of wireless earbuds: Redmi AirDots, Mi True Wireless Earbuds, Mi Collar and Mi Sport. You can also find other species that will differ from the previous version by the PRO postscript. Depending on the model of the headset, the principle of connection and configuration may differ, therefore, first with the instructions supplied with the kit. But, as a rule, to connect Xiaomi wireless headphones to the phone, you need to do the following:

  • We turn on the headphones by pressing the touch or mechanical button.
  • After that, press the button again and hold it until a sound signal appears, indicating that it is ready to connect.
  • Go to phone settings and turn on Bluetooth.
  • We are waiting for the device to appear in the list of available devices. If nothing appears, then you can click on the “Update” button. Also check that the blue light on each earbud is flashing.
  • Click on the headphone model in the list and wait for pairing. In the window that appears on the screen, select “Accept”.

Now, when you turn on Bluetooth, the wireless headphones will automatically connect to your phone. To cancel permanent pairing, you need to do the following:

  • Click on the name of the headset in the list of connected devices.
  • On the page that opens, click on the “Unpair” button.

In order for the headphones to appear in the list again, you need to do the connection steps again.

One earphone does not work

The second most common problem is that the sound is heard in only one of the headphones. This is most often caused by the battery of one of the wireless headphones being completely discharged. You can understand this by the indicator: if it is blue, then everything is in order, and if it is red, then the headset is discharged.

Also, it cannot be ruled out that the headphones cannot pair with each other. This is usually due to a system error, but mechanical failures also occur. To fix the problem, you need to do the following:

  • Turn off each of the headphones completely by long pressing the touch panel. The indicator lights should flash red. Press the button on the headset again and wait for about 30-50 seconds. After the appearance of two quick flashes, we stop pressing and just wait until the indicators stop burning altogether.
  • We put the headphones in the charging case for 5 seconds, and then we take them out at the same time. After such manipulation, the headphones should pair with each other.
  • We are trying to connect the headset to the smartphone. If it is detected by the smartphone as two different devices, then first of all we connect to the right earpiece. If successful, click on the button on the left earphone.

There is also another way to pair each of the earbuds:

  • We put the headphones in the case and check that they are fully charged.
  • We take out one of the headphones, and it doesn’t matter right or left.
  • We expect the headset to turn on automatically, and then turn it off with a long press (30-50 seconds).
  • Click on the touch panel until a red indicator appears.
  • We take out the second earpiece and do the same. The most important thing is to follow a strict sequence.
  • We put the headset back into the case. Each earphone should have a red LED on.

After following these steps, the headphones should work together without any problem.

How to connect Xiaomi wireless headphones to your phone

Xiaomi is engaged in the production of a large number of gadgets, ranging from smartphones to smart sneakers. Recently, the manufacturer has been actively engaged in the manufacture of wireless headphones, which are already very popular among users.

After buying a new headset, many people are wondering how to connect Xiaomi wireless earbuds to the phone. In fact, there is nothing difficult about this, and the entire initial setup will take a few minutes. Now we will tell you in detail about the connection sequence, and also consider possible problems.

Charging problems

Charging problems with Xiaomi wireless earbuds are quite common and can be dealt with at home in most cases. The main causes and options for resolving the failure can be found below:

Thus, you can connect Xiaomi wireless headphones to your phone in a few minutes. And it doesn’t matter what operating system is installed on your smartphone. The headset works correctly with both iPhone and Android devices.

How to use Xiaomi Haylou GT1 Pro TWS headphones

Double-tap the left earbud In music playback mode, double-tap the left earbud to skip to the previous track

Double tap right earbud Skip to next track

Touching both earbuds at the same time Play / pause during music playback

Double-tapping both earbuds Answering an incoming call / ending a call

Touching the headphones for 1 second Rejecting an incoming call

Triple-tap the left earphone Activate the voice assistant (in standby mode)

Triple-tap the right earbud Activate Game Mode (Ultra-Low Lag)

Activating the voice assistant

To activate the voice assistant, double-tap the touchpad.

Note: It is required that the device supports the functions of voice assistant and activation in standby mode.

How to use Xiaomi Haylou GT5 headphones

Play music. Insert the earphones into your ears or touch the left / right earbuds once. Pause. Remove the earbuds from your ears or touch the left / right earbuds once. Previous track. double tap the left earbud Next track. double-tap the right earpiece Answer call / Hang up. double-tap the earpiece. Reject the call. keep the earbud pressed for 1 sec. Voice assistant. three times tap the left earbud to turn on / off game mode. tap the right earbud three times.

Answering a second call and switching between calls

When a call comes in, tap the touchpad to answer the call. When there is an incoming call from the second mowing line, tap the touchpad again to switch to a new incoming call.

To switch between lines, double-tap the touchpad.

Switching Microphones of Smartphone and TWS Headphones Xiaomi Mi AirDots

To change the microphone, touch and hold the touch panel for 1 second.

How to use Xiaomi Haylou GT3 Bluetooth headphones

Next track Double-tap the right Haylou GT3 to play the next track.

Previous track Double-tap the left earbud to play the previous track.

Play / Pause Tap any earbud to play or pause music.

Reject call Press for 1 s to reject incoming call.

Voice assistant To call the voice assistant, tap the earphone three times

Review of Xiaomi Mi True Wireless Earphones 2 Basic

First, you need to immediately make it clear that the monitored headphones are a cheaper version of the Mi True Wireless Earphones 2, announced earlier this year. They lack support for the LHDC codec, which is the only difference from the older model. Also, the gadget in question is known under a different name in China. Mi AirDots 2 SE. Actually, now that the main points for distinguishing the novelty from other devices with a similar name and appearance have been sounded, we can proceed to the review.

The Xiaomi Mi TWS 2 Basic charging case is slightly larger than we are used to seeing in devices of this class, it has an unusual shape and opening mechanism. However, the case is lightweight and fits comfortably in most s. You may be limited only in using the coin on jeans, which they often like to use for storing a headphone case.

When you open the case, in front of you are in-ear headphones, they are completely similar in appearance to those in the Mi TWS 2 case. The shape resembles that of Apple Airpods, but the rod itself with the microphone removed is somewhat thicker. If before that you wore the same Airpods, then you will have to get used to these headphones, but the addiction will pass quickly. It is worth remembering that the headphones cost only 40 euros and we will continue to remember this throughout the review.

And yet the perfect news is that these are in-ear headphones, not vacuum plugs, so they will fit most ears. Supports earplug detection. playback stops automatically.

If you have a suitable Xiaomi smartphone with the latest firmware version, then connecting Mi TWS 2 Basic is as easy as connecting Airpods to an iPhone. In the sense that as soon as you open the lid of the case next to your smartphone, a plate appears on the display with the charge of the case and headphones and a connection proposal. That’s all, no need to go into the settings, select the Bluetooth item and connect the devices each time.

However, there is no place for panic, even if your smartphone is not from Xiaomi. The headphones can be easily connected with another smartphone, unless there is a nice connection plate with animation on the display.

One interesting thing: there is a tiny white LED not only on the case, but also on each earbud. It flashes when pairing or low battery.

The case has a built-in 410 mAh battery, which is enough for four full charges of both earbuds. The case is charged via the USB Type-C port, there is a cable in the kit. Fully charging the case takes about 90 minutes.

The maximum charging power is 5W (5V / 1A), so charging can be done either from an outlet or from a laptop. Charging will complete successfully even from the old 2.5W ports, but it will take longer.

The charging of the headphones in the case is carried out through the contacts that are at the ends of the rods of each of the headphones. Headphones in the case are attached to magnets, their “refueling” begins immediately after taking a position. Tests have shown that 5-7 minutes of additional charging is enough for the headphones to work for another hour. It takes about 30-40 minutes to fully charge each earbud.

Mi TWS 2 Basic supports touch control on both earbuds. Double tapping works like Play / Pause / Answer / End a call or call the voice assistant. Each earbud has three sensory zones (top, middle and bottom). Each one performs its own actions. Gestures with these zones work as expected. The only thing you need to get used to pressing and holding in the right place. We are not talking about weeks of getting used to it, a couple of days is enough.

Unfortunately, there is no way you can reconfigure the locations of the gestures, you will have to remember how Xiaomi itself implemented it.

Sound quality is, of course, one of the most important qualities of a headphone. Well, here Mi TWS 2 Basic is unlikely to surprise and their sound quality is easiest to describe with the last word of their name (Basic. simple). They sound usually, the depth of the sound is almost not felt, the high ones are also not in shock. However, the vocals seemed great and this is the last thing you expect from headphones for 40 euros.

Despite the 14.2-mm driver, the headphones sound exactly no better than the same Apple Airpods. No, we are not saying that they sound terrible, but when compared ear to ear, these headphones from Xiaomi show that they lack sound quality. However, all this is absolutely irrelevant if you are used to using such headphones for watching movies or listening to podcasts.

Well, if you start comparing with other headphones on the market in this price range, it turns out that few people can give the user a better experience. Another important benefit is the cancellation of conversation noise (both microphones work). The interlocutor hears and easily understands what you are talking about in these headphones.

Обзор беспроводных наушников Xiaomi Mi True Wireless Earbuds Basic (Redmi AirDots). Global version

The promised range of the Mi TWS 2 Basic is 10 meters. Xiaomi did not deceive, and at a distance of 10 meters without walls, the headphones continued to work as expected. The distance is halved if there are two walls between the smartphone and the headphones.

Xiaomi promises 5 hours of battery life for each earbud when playing music at 50% volume. Under some circumstances, the earbuds may even last a little longer. In our test, fully charged headphones played music at 65% volume for exactly 5 hours, after which they had 10% battery left.

Making calls with headphones drains them as expected. If you want to use them as a headset, then the best option would be to use them one at a time, first one, and after discharging the other. Then the total time of use will stretch up to 7 hours (3.5 hours for each earphone).

For those 40 euros that these headphones cost, the user will receive moderately good sound, excellent signal quality and good noise reduction during telephone conversations. Audiophiles and bass aficionados are passing by, these headphones won’t be able to meet their needs.

Mi TWS 2 Basic is ideal as a headset or headphones for listening to podcasts / watching YouTube or movies. The relatively low price makes them suitable even for training in the gym.

Design

Xiaomi did not come up with something new and released Mi True Wireless Earphones Lite in exactly the same design as the Pro version. The delivery set did not receive any changes either: a case, headphones, a manual, a cable and a set of ear pads.

The Mi True Wireless Earphones Lite case is made of white matte plastic. On its right side there is a single function key, on the bottom there is a Type-C charging port, and on the front side there is a light indicator. The lid of the case, like the headphones inside, is fixed with magnets. Everything is kept confidently, nothing will fall out arbitrarily.

The Xiaomi earbuds are made of the same plastic as the case and have a vacuum construction. A touch key is hidden under the metal platforms. Also, each earphone is equipped with 2 microphones.

Mi True Wireless Earphones Lite sit confidently in your ears, and presence sensors on the inside help them automatically start playback and pause music when you remove the wireless headphones. This function works quickly and accurately.

There are no questions about the volume reserve, but when listening to music, there is not enough bass and volume. The sound is flat, so you have to play around with the equalizer settings for a more comfortable sound.

The headphones use Bluetooth 5.0 to connect to the phone. The signal is really more stable compared to the Pro version, which used version 4.2. It also had a positive effect on energy efficiency.

How to connect an audio device to a smartphone read here.

The headphones support audio codecs such as AAC and SBC. The set is small, but it will be enough for standard use. Headphone touch pads perform a range of standard functions: pause / play, call control and assistant call.

Also, wireless headphones can be used as a headset, even alone. The interlocutor will hear well, but at maximum volume, due to the design feature, he will also hear himself.

The battery life is 4 hours. And with a charging case, this time increases to 16 hours. A worthy indicator. And the universal USB Type-C connector allows you to quickly recharge wherever you are.

Review of Xiaomi Mi True Wireless Earphones Lite

The new model of Xiaomi wireless headphones is a continuation of the beloved Mi AirDots Pro. Despite the presence of the word Lite in the name, the headphones have gained improved performance and become more affordable. Reviewing Mi True Wireless Earphones Lite today.

Xiaomi Mi True Wireless Earphones Lite will be a good friend for wireless music lovers. Large autonomy and small form factor make it possible to always have them with you. Comfortable fit and built-in microphones ensure comfortable use even after extended use.

Manual Xiaomi Mi True Wireless Earbuds Basic

From the document you will learn: device overview, wearing, charging, turning on and off, using one and two headphones, factory reset, overview of functions, safety measures and warnings.

How to set up, use and tips:

How to charge. Page Use the cable to charge the charging case. Indication: low charge. the indicator flashes in red every 3 seconds; charged. the indicator of the charging case is white.

How to turn on. Page 2 ways: 1. automatically turn on when you take it out of the charging case; 2.press and hold the touch pad for 1 second until the indicator turns white.

[Tutorial Review] Redmi AirDots (a.k.a. Mi True Wireless Earbuds Basic)

How to connect. The page You can sync both 1 earphone and 2:

  • Using 2 headphones: Remove both headphones from the case at the same time and they will automatically connect to the smartphone, if it does not work the first time, repeat the action several times. Did not help? Manual connection: Turn off Bluetooth on the smartphone, and manually turn on both headphones, the indicators flash briefly in white, and on the right earphone, the indicator slowly flashes white after pairing between the headphones. And now turn on Bluetooth on your smartphone.
  • Use 1 earphone: To do this, take out only one earphone from the case, preferably the right one (the left one takes a long time to connect). On your smartphone, select “… Earbuds _R” or “… Earbuds _L” and sync. If done manually, the principle is the same as with two headphones.

How to turn off. The Disconnect page can be done in 2 ways: 1. put them in the charging case; 2.press and hold the touch pad for 5 seconds, wait for the red indicator light.

How to embed. Page To make it comfortable to wear and not fall out, follow the recommendations on page 2. Gently insert the wireless earbud and make sure it does not fall out, shake your head to be sure, and align so that the microphone is open and turned towards your mouth (when talking on the phone).

Support for Mi True Wireless Earbuds Basic

Mi True Wireless Earbuds Basic (Redmi AirDots Global version). budget wireless earbuds from Xiaomi. Juicy sound for modest money.

On the current page you will learn how to use Mi True Wireless Earbuds Basic, how to charge, how to connect, how to disconnect, how to wear correctly, etc. Navigation:

How to download the application manual

The Mi True Wireless Earbuds Basic TWSEJ04LS user manual is easy to download from our website. On the current page find the picture “Download”, click on it. A PDF file will open in a new tab in your internet browser, which you can save to your device or read online. The document is very easy to download, for free.

Super, now you know how to use Mi True Wireless Earbuds Basic. The instruction in Russian is optimized and compressed as much as possible for easy reading on all popular devices. Easy to download in 1 click, no registration required.