Why the printer does not connect to Wi-Fi. Instructions for connecting the printer to the laptop via Wi-Fi

If the printer began to lose the Wi-Fi network signal

Blitz-giggling in order to find out the cause of the problem and the way to eliminate it showed that in a number of cases it really can be a “symptom” of serious malfunctions, which in home, so to speak, conditions without special knowledge and equipment are unlikely to work out.

Therefore, for starters, here is a link. repair of office equipment in Odessa. there is a convenient chat where at least they will help with preliminary diagnostics.

As for this most preliminary diagnosis, in this particular case, that is, when the printer “does not hold” the connection to Wi-Fi, it begins with standard measures.

• a) just reboot the computer;
• b) update the printer driver;
• and c) check the center of Windows updates for the availability of automatically installed updates that could cause such a problem (sometimes the problem is solved by removing the update).

If not one of the listed measures of the proper effect did not have the following, then we try the following:

#1. connect the printer to the mains directly

that is, without any extension cords, branches, an uninterrupted, “network filter”, etc. (If there are any). It turns out that it may also be that the printer simply does not have enough energy for a normal connection to the Wi-Fi network.

Therefore, this problem is diagnosed and at the same time eliminated by including the device directly in the outlet.

#2. Disconnect the antivirus and firewall Windows

temporarily. Then we check how the printer will work. If Wi-Fi he holds, as expected, then we check the settings of the antivirus and the firewall.

#3. turn off Bluetooth and IPV6

also temporarily. In Windows 10, recall, the Bluetooth module of the computer can be turned off/enabled through the taskbar (if it is a laptop, then it may have a separate button).

IPV6 in different printers turns off in different ways, therefore we are looking for the exact name of the model, then google manual and read how to configure the parameters of the IPV6 of your printer.

#4. start the procedure for checking Windows system files

For this, first we save everything important and close the work programs and then:

• We open the Windows 10 command line on behalf of the system administrator (Windowsr buttons. We write CMD. Click the Ctrl Shift Enter buttons from the keyboard);

• In the command line we introduce SFC /Scannow and click Enter (we wait for the completion of the computer scan procedure, it will take some time);

• After the check is completed, just reboot the computer (press the Start button. “Food”. “Reboot”).

#5. Launch the Windows system recovery procedure

• Again, open the Windows 10 command line on behalf of the administrator of the system;

• In the command line we introduce Dism /Online /Cleanup-Image /Restorehealth and click Enter (we wait for the completion of the computer scan procedure, it will take some time);

• After the check is completed, just reboot the computer (press the Start button. “Food”. “Reboot”).

If even after all the quiet ones it was not possible to identify and eliminate the problem, and the printer is still disconnected from the Wi-Fi network, then you should definitely seek help from a service center (Link see. above ).

The first way. we connect via WPS

This method is suitable for you only if both the printer and the router support WPS technology (Wi-Fi Protected Setup). If so, then follow the following actions:

Using the navigation keys in the printer menu, enter the wireless connection section;

Second way. we use SSID password

A simple way to connect to Wi-Fi, but it works only in one case-if the printing device is equipped with a LCD screen. So you need:

How to open overall access to print?

To open overall access to the printer, first you will have to connect the printing device to the laptop using a regular USB cable.

This method can be useful when it is possible to connect a printer with a home PC using a wired connection. However, it is also necessary to connect a laptop to the network.

After making sure that the printer works through a wired connection, you can start setting it up. To do this, you need to go to the “control panel” through the Start menu and select the “Device and Printers” item.

Now select the available printer from the list of available devices, and then press it with the right mouse key. In the list that opens, click the “Printer properties”.

Here we are only interested in the “Access” tab, and specifically. the item “General access to this printer”. Make sure that a checkmark is installed near it, and in the field below the network name for the printer is set.

After maintaining these settings, you can disconnect the USB cable and check the performance. Go to the “Devices and Printers” again and click “Installation of the printer”. In the window that opens from two available points, you need to select “Add a network, wireless or Bluetooth printer”. After that, a list of all available devices will appear in the window.

It should be noted that the name of the printer on this list will be the way it was assigned during the opening of the general access.

Select it from the list and click “Next”. Now it remains to wait for the completion of the setup and make a test print. Now the device is completely available for all available laptops and computers.

Operating advice

Unfortunately, connecting a regular home printer to a computer or laptop through a wireless connection will not work. The fact is that such simple models do not support this type of connection, so you will have to limit yourself to connecting via a USB port.

Before starting to print any important documents, you need to make sure that the printer is configured. Otherwise, you will have to configure it on your own. In this case, special attention should be paid to retreats from the edges of the sheet, scaling the text, images and other similar parameters.

If you need to print the images that were taken from Internet resources, you need to pay attention to their size. It should be at least 1440×720 pixels, otherwise the picture is not too clear (as if blurry).

Fortunately, the process of printing on a printer connected using a cable or wirelessly does not differ in any way, so for this you just need to press the “Print” button and check the correct display of the future material.

Instructions for connecting a phone to printers of various manufacturers

The best option for printing from the phone is to use the capabilities of the original printer software for mobile devices. It is not difficult to use them, while the consumer receives much extended functionality for remote control by a printing device. You can download the printing application on the phone on the official website of almost every manufacturer. In any case, on the resources of famous brands they definitely have (HP, Canon, Epson, Brother, and T.D.). However, if the manufacturer of your print device has not taken care of creating an appropriate application for printing on a smartphone, then you can use the programs from other developers. The main thing is that the phone and printer support the print on the wireless network.

How to connect a phone to a HP printer

You use a printing device from the American company Hewlett Packard and want to connect it by Wi-Fi to be able to print, then you will need to download the HP Smart application to the smartphone. You will need to print a photo or document from the phone:

• Turn on the HP printer and connect to Wi-Fi according to the instructions;
• connect a smartphone to the same Wi-Fi network;
• install the HP Smart application on the mobile device;
• Open the HP Smart application;
• Select the right file and click “Print”.

The printing device automatically recognizes the document and begins its printing. In addition, HP Smart allows you to track the level of ink/toner in cartridges, as well as monitor the state of All-In-One Printer. You can download the HP Smart application from the official site of the manufacturer, Play Market or App Store.

How to connect Canon printer to the phone

The Printers of the Japanese Canon brand, as well as HP office equipment, have their own printing application on mobile devices. It is called Canon Print. Support for this software is carried out both by devices running Android and iOS. Printing is carried out according to the following principle:

• Turn on the Canon printer
• connect it to a wireless network;
• Install Canon Print on the phone;
• Open Canon Print on the phone;
• Select the file that must be printed;
• Click the “Print” button and wait for the printer initialization.

After the device recognition, the seal will begin in automatic mode. Click to download the Canon Print application, or this can be done in the market of applications of your mobile device.

How to connect a phone to an Epson printer

Another Japanese organized equipment manufacturer took care of creating an Epson IPRINT special application for a mobile phone, which allows not only to print Wi-Fi, but also to monitor the state of the printing device. It works only with those All-In-One Printer, which support the Wi-Fi Direct function. To use it to create an imprint, you will need to make the following:

• turn on the printer and connect it to the wireless network;
• Open the details of the network settings in the printer menu and remember or write out the name and password;
• Connect the phone to the Internet, download and install the Epson IPRINT application;
• Open Epson Iprint and select a connection method;
• select the right device in the list of possible connections;
• synchronize the operation of the printer and smartphone (enter the password).

Now, to print the desired file, open it and select “Print in another application”. In the list that appears, select the Epson IPRINT program. As soon as the application recognizes the document, click on the “print” button, which is in the lower right corner. You can download the Epson Iprint application for Android on Google Play, for Apple in the App Store or on the manufacturer’s official website.

How to connect a Brother printer to the phone

Brother, actively engaged in the production of office equipment, also did not stand aside. For printers and All-in-One Printer their own production, they developed a special IPRINTSCAN, which allows you to print documents straight from mobile devices. To take advantage of this opportunity, you need:

• Turn on the printer and configure its Wi-Fi network connection;
• Open the printer network settings and remember the username and password for further synchronization with the phone;
• Connect the smartphone to the same Wi-Fi network, download and install the Brother IPRINT application&Scan;
• Open the application and perform devices synchronization.

Everything, you can print. The principle of operation is the same as that of the Epson printer application. You can download Brother IPRINTSCAN in any application market or on the official website of the manufacturer.

How to connect a Pantum printer to the phone

The relatively new Pantum office equipment manufacturer (their company has recently turned 10 years old) also provided for its devices the ability to print with a mobile phone. To do this, you will need to perform several simple actions, namely:

• press the Power button and turn on the printer;
• connect the Pantum printer to Wi-Fi;
• install paper (at least 4 sheets) and clamp the “Cancel” button for 5-10 seconds to print the printer status report (relevant for Pantum P2500W, for other devices, the reporting process can be called a combination of other keys, or from the printer menu);
• connect a smartphone to the same Wi-Fi network; or just Pantum for iOS;
• open an application, allow data processing and accept a license agreement;
• scroll through a few pages of demonstration of the Opposites and click on the Experience Immediatly button;
• wait for the resource installation and press the “add printer” button, click “allow”;
• wait until the list of printers is updated and select the required device;
• Wait for the connection with the printer, enter the password from it (you will find the password on the fourth page of the previously printed report, as a rule, this is a set of numbers from 1 to 8), click “Connect” and wait for the re.connection.

Next, select the required file and send it to print by clicking the “Instant Print” button. True, it is not quite instant, you need to wait for about a minute, while the printer recognizes the files and prepares them for printing.

Why does the computer not see a printer with a wired connection

The occurrence of the printer connection error to the network, which is synchronized using a cable, is most often corrected by a simple recovery of the printing device to PC. You can also try to change the port connection port to the computer. Pay attention to the fact that the All-in-One Printer can be in sleep mode. This function also affects the display of your printing device. It even happens that the printer came out of a sleeping state, but this was not programmed to display for any reason. In this situation, it will not prevent the computer and printer to reload the computer.

If a simple reboot and retic did not help, then you need to perform a number of the following actions:

• Turn off the printer and disconnect the cable from the computer;
• Turn on the device again and re-attach the cable to the PC USB port;
• Enter the control panel of the computer operating system;
• Find the section “Devices and printers” there;
• In the menu that opens, select the model of your printer and click on it with the right mouse button (Mouse 2);
• In the context menu, select the “Printer Printer” item;
• when the parameters of the printing device open, go to the Safety tab;
• Put the boxes in the corresponding points of the category “allow”.

It will not yet be superfluous to check which printer is set by default (if several active devices are on the network).

What to do if the computer does not see a printer with a wireless connection

In multifunctional printing devices (click to find out the main types of printers) using a wireless connection, problems with synchronization similar to

wired devices, but in some moments may vary slightly. For example, if the reason for the lack of connection is incorrectly setting up or a malfunction of the Wi-Fi router. Therefore, this product should be checked by the priority case. Also, it will not be superfluous to install whether the printer and a computer (smartphone, tablet, laptop and any other gadget) work in one network). This is especially true for various kinds of mobile devices. After all, it is not rare that the smartphone is connected to one network, and the printer to the second.

Separately, it is worth noting the work of mobile applications for printing. Sometimes it is precisely because of them that the printer is not on the network. Simple reboot, or reinstallation of software usually corrects this problem. In addition, many confuse the possibilities of connecting the printer on a wireless network. Carefully read the instructions for the printing device, perhaps it is synchronized through the Bluetooth channel, and you are trying to do everything using a wireless Wi-Fi network.

If none of the above helped, try to download and reinstall the printer driver. Only pre.completely delete the printer drivers installed earlier. Do not forget to look into the PC OS services and check the operation of the print manager, as well as check the computer for malicious programs.

Attention: if it turns out that you have deteriorated a printer or cartridge, then do not throw them into the trash. Dispose of office equipment and consumables correctly. Here you will learn where to hand over the used cartridges.

What to do if the laptop does not see the printer

If the laptop does not see the printer through Wi-Fi, then the reason is most likely typical mistakes that the user makes. This includes:

The password (SSID is a local network) incorrectly, so the printer cannot connect to it.

• The button for installing communication via WPS is pressed at the wrong time.
• Drivers for the printer are not installed or an inappropriate version has been used.
• The router or laptop is not rebooted after installing the drivers and connecting the printer.
• Not activated Wi-Fi on a router or printer.
• The connected printer is not installed as a default printing device.

All such problems occur due to the inattention of the user and are easily eliminated if you pay attention to it. A little more complicated if you use a non.working cable to connect to a router who does not have obvious traces of damage.

The only way to make sure that it is a problem is to use a similar wire that is guaranteed to work. Find out how to connect a laptop to the printer through the wire quickly and efficiently.

It is also possible that USB port simply does not work in the router. To check its functionality, you can use a flash drive with recorded files, which will be displayed as a device from a network environment. If the port is not a worker, the drive will not be displayed.

A complex type of malfunction that not every user decides-if it is established in the router settings that only certain devices can connect to it, the filtration of which occurs via MAC addresses. In this case, you need to add the printer‘s MAC address to the allowed list. If you are not interested in such excessive safety and you did not make such installations, you can reset the settings through the control menu of the router.

To do this, enter one of the following addresses in the address bar of the browser. 192.168.0.1, 192.016.one.1 or 192.168.2.one. As a rule, the login and password for entering are the same. admin, in lowercase letters. Modern routers usually have a separate menu item. “reset settings” or reset settings.

You will need to configure the router again, but to connect to most providers, this is done in a couple of clicks. In any case, it is faster and easier than “Dance with a tambourine” with the entry of the MAC address for each new device on the network.

What to do if the laptop does not see (does not recognize) the printer

It is worth paying attention to what caused the occurrence of this problem. For example, you just connected the printer, and the portable PC does not want to determine it. Either the printer normally printed from the laptop, and then at some point he stopped recognizing them. Although the factors of the appearance of recognition error and are similar in many criteria, it is worth starting the procedure for identifying the problem a little different methods. Next, we will briefly explain what first of all it is worth paying attention to in one case or another.

The laptop does not see the new printer

If you only connect the printer to the laptop, then for its full operation, the appropriate software should be installed. It is at this stage that many make an error. They forget or do not know that it is necessary not only to connect office equipment to PC, but also to install the driver on it (the conclusion is made on the basis of frequently asked questions by consumers in thematic forums). In addition, many users do not know that for the full operation of the printer, it should be exposed by default as the main. It will also not be superfluous to check whether the printing service on the laptop is included. Well, and the last stroke, you should re.check the connection cable or settings of wireless printing parameters.

The laptop does not see the old printer

If the printing device has worked normally for many years and suddenly ceased to be determined by a laptop, then in this case the start of the check will depend on the main influencing factor. For example, if you cleaned the room, then the first thing you need to check the contact between the printer and laptop (if you connect through a Wi-Fi router, then it should also be inspected). The next step needs to check the updates of the drivers and the operating system of the laptop. Perhaps the developers have released a new software update, so some OS services were temporarily suspended. Well, finally, it will not be superfluous to check the laptop for the presence of viruses. Malicious programs often break the operation of the printer driver.

Attention: when trying to install drivers from an old printer or All-In-One Printer on a laptop, modern antivirus/protective programs can see a potential threat in them and block their work. In fact, everything is fine with the driver (if you downloaded it from an official or proven site, or install it from a complete disk). Therefore, before installing the driver, it is recommended to turn off the antivirus, or immediately add software on the exception.

If there are problems when printing from a mobile device, with articles: “How to connect a printer to the phone” and “How to print from the phone”.

The laptop does not see the printer via USB

By connecting a printer to a USB laptop, you need to understand that many printing devices remember which port they were connected to. Therefore, any manipulations with switching can cause malfunctions in their work. In addition, printers do not strongly complain too long cables. The most optimal USB cord is the one that comes with (± 0.5-1.5 m). Also, office equipment does not complain of connection through various extension cords, USB hubs or adapters. It is better to directly connect the printer to the laptop. In addition, connecting the printer to the laptop, pay attention to the versions of USB ports. Old models of office equipment are clearly not connected to the USB 3 port.0.

The laptop does not see the printer through Wi-Fi

The lack of a printer connection with a laptop connected by a wireless way is mainly due to a malfunction in the software operation. Therefore, the first thing is to check the connection settings for Wi-Fi, as well as the operation of the printer driver and the press service. Failures can also occur due to obsolescence for. Check the driver and the printer microprogram for updates (sometimes, on the contrary, you should roll back before the previous version). In addition, it is worth paying attention to updates for the operating system of a personal computer (especially relevant for modern Windows 10). If the printer or All-in-One Printer is connected to a laptop via Wi-Fi router or adapter, then their performance also needs to be checked.

Printer connection error to the laptop: General recommendations

We talked above what we should pay attention to in a particular situation. Next, we will describe what actions need to be used to solve the problem of recognition of the printer with a laptop system.

Installation, update, reinstalling the printer driver

At first glance, it may seem that it is easy to carry out any procedure with the printer driver. But in practice, it is at this stage that many consumers make frequent mistakes leading to malfunctions in. After all, not always installing drivers from a complete disk is a rational solution. First of all, it is necessary to take into account the compatibility of the driver from the laptop OS. Some software for old office equipment will not work on modern operating systems (for example, Windows 10 or Mac OS 11).

You can solve the problem by installing the driver from the official website of the manufacturer (you can also find the latest Firmware Office equipment there). Visit Web Sit, brand of your print device. Go to the Support tab, find the model of the desired printer and download the current version of the drivers. In addition, when you install the printer driver, carefully read the recommendations. In most cases, you should not first connect the printing device to the laptop. Wait for this item to appear in the installation master. Otherwise the installed driver may not see the printer connection.

Important: if you need to reinstall the printer driver, then you must first correctly delete the already installed version:

• If the driver was installed by a separate program. In Windows 10, you need to open the “Parameters”, then go to the “Appendix” tab. In the list you need to find and delete the necessary software (in other versions it is also done, only through the “control panel”. “The installing and deleting of programms”). Or use a special removal file that is in the folder of the installed on.
• If the driver was installed using Windows OS functions. In “Parameters” or “Management Panels”, find and open “Devices and Printers”. Select the printer that must be removed, call the context menu (usually with the right mouse button), click “Delete” and confirm the action.

In addition, in Windows 10 below you will see the “Property Properties”, click and go to the “Drivers” tab in the window opened. Select and delete the appropriate software.

Default printer selection

Until recently, we ourselves did not understand what the problem could be here. After all, setting the printer by default is the simplest procedure. It is enough to open “Devices and Printers”, select the appropriate printing device and click “Use by default” in the context menu. That’s the whole process of choosing a default printer. However, owners of laptops with Windows 10 OS, this issue was a little less lucky than users of older operating systems. Although it is worth noting that it concerns only inexperienced consumers.

If the laptop with Windows 10 does not see the printer, due to the lack of choice by its device by default, then you need to perform the following actions:

• In the “Start” menu, open the “parameters” (press the button in the form of a gears);
• In the parameters of Windows 10, go to the “Devices” section;
• In the window that opened to the Bluetooth tab and other devices (do not go to the Printer and Scanners tab, it is more difficult to find the desired section through it);
• In the menu “Concomitant Parameters”, you will see the “Devices and Printers” section. open it;
• In the list, find the model of the connected printing device, click on it with the right mouse button to call the context menu, and select the “use by default” item.

Attention: You can open “Devices and Printers” through the “Printers and Scanners” tab, which is quite logical. But to do this is a little more complicated than through the Bluetooth and other devices section. To do this, click on any device from the list and click on the “Management” button. Next, open the “Equipment Properties”, go to the “Parameters” tab and click on the “Folder” button “Device and Printers”.

Inclusion of the service (dispatcher) of the print Windows

Sometimes an error in determining the printer with a laptop can occur due to the disconnected printing service. As a rule, the print manager is always on by default. However, most often the consumer consciously disconnects it to reduce the load on the operation of a personal computer (also the service can be turned off using special programs). To check if the print service is included, perform a few simple actions:

• click with the right mouse button according to the Start menu and select the “execute” function (or click on the keyboard a combination of Winr buttons);
• In the window that opens, enter Services.MSC, opposite the line “open”;
• Click OK and wait for the opening of a list of laptop services;
• In a loaded list, find the “print manager”;
• Click twice in the specified service;
• Select the automatic type of start.up, press the “apply” button and start the service (in some cases, you must immediately enable the print service, and then change the type of launch).

Important: in Windows 10 you can open services a little faster, without entering a special team. Click the Start menu with the right button, select “Computer Management”, go to the “Service and Appendix” tab and open “Services”.

Other ways to eliminate the problem “The laptop does not see the Windows 10 printer”

If none of the above has helped you solve the described connection error, then you can experience luck using the classical means of diagnosis and eliminate the problems of the operating system. In practice, this function very rarely helps to solve the problem, but it is still worth trying. In addition, you can download the diagnostic tool from the printer manufacturer. If the problem is in the printing device, then this software will help to find out, and also provide some tips on its decision. But if nothing helps at all, then you should contact a specialist (and it is better to call it to the house or to the office).

The laptop does not see the printer via USB

Many have bought a printer for a very long time, and you can only connect it with a wired way. Therefore, the first thing you should check the cables and only then move on to the setting of the printer or the operating system. If your printer is connected in another way, then this step can be skipped.

First of all, check how tightly the cable sits in both nests (on the motherboard and in the printer itself). Of course, if you have several suitable wires, then try them all. It is better to inspect them for damage, cliffs, cuts, excesses and so on. By the way, you need to connect the cable directly to the motherboard. It is better not to use USB ports on the front side of the case and not resort to the help of various USB hubs and extensions.

Also check the version of the USB. The most popular options are 2.0 and 3.0. The first has a black color, and the second is blue. It is better to connect old equipment to an earlier audit connector. Especially if you use the old operating system and old iron. It is also desirable to use the cable that came with the printer. It is with it that the device will be completely compatible. And finally, make sure you have a suitable wire. The fact is that many novice users confuse it with Ethernet with a connector due to the fact that they are visually very similar. But do not try to put a cable in the printer to connect the computer to the router, and then ask the question: “Why does the laptop not see the printer through the cord?””

The laptop does not recognize the printer through Wi-Fi

If you use a wireless connection, then most likely a program problem. Very rarely, but it still happens that an integrated Wi-Fi module in the printer is out of order. Diagnosing such a malfunction is quite difficult at home. And start checking the module only if other methods have not helped.

Installation of drivers

For the correct functioning of many devices connected to a computer, drivers are required. This is a special software with which the operating system gets access to the equipment of the equipment (in this case, the printer). Sometimes it happens that the drivers work correctly, and then, as a result of a system failure, they cease to function. over, Windows may not notify the user about the problem. Anyway, herself may not be aware of what is happening.

Causes of problems and their solutions

The first thing is to consider several main reasons why this happens with the technique.

• Malicious programs and applications could well have been installed on your device without notifications. First, download the antivirus with the Play Market and check your phone.
• Over time, not even when using a photo or video camera, the device memory is quickly filled out. In this case, it is not enough for the system processes, which entails a refusal to print or connect to Wi-Fi. Solution. Clean the smartphone of unnecessary photos or applications.
• Check if the mobile phone is included in the modem mode. If so, then turn off this setting.

But it will also be useful to check the installed devices in terms of the availability of wireless communication. It should be understood that in addition to the phone itself, your router and printer are also involved.

They can also be sources of problems.

• First of all, turn off your smartphone completely. Open the back cover and remove the battery. Put it aside for 10–20 minutes. Meanwhile, take the time to the router.
• It should also be turned off for a while from the outlet. After turning on, try connecting a Wi-Fi network from any other device. It can be another phone or laptop. Pay attention to password entering. If it has already been indicated, then see if there is an opportunity to see it. And also it can be indicated in the modem itself or printing from the company providing the Internet service. A special button on the Password router can be dropped on a standard. It is indicated directly on the sticker of the modem case.
• Now we turn on our smartphone and activate the Wi-Fi transmitter in the settings. By default, it could be disconnected by the Android system. If you could not establish the connection, then try to remove this connection completely, and then turn on the search for Wi-Fi networks and will connect. You already know the exact password. How to find out we wrote in a step under the number “2”.
• We are convinced that the printer is successfully connected to the network. This may indicate: the correct operation of the WPS identifier on the case, the availability of the device in the “Locher” with a PC or “laptop”.

It should be understood that not all printers and mobile phones can work directly with each other. For this, they and your Internet equipment should support some specific functions and capabilities. Some routers or modems that you use for such purposes should be stitched in a certain way, programmed or configured.

Alternatives

Additional options for installing a communication between a smartphone and a printer can be a computer or a special mobile application.

• To connect via a PC or laptop, you need a USB cable that can be taken from a charger. After connecting to “PC”, an additional disk will appear. But in fact it is an internal memory or a map of a smartphone. Then we work with files as in the usual conductor “Windows”. Submit documents and photos in the usual algorithm.
• If you use applications, then the best option for these purposes will be the cloud solution of Google Cloud Print, Dropbox or branded applications of printing equipment manufacturers.

How to use such capabilities of modern equipment can be found at the link. We published it at the very beginning of the article.