Why did a television guide on Samsung stopped working. Channel tuning

TV does not show the program

I quote the previous topic on the pure of its closure.The television guide displays the program that will be in 3 hours.After the flight analysis, it turned out that for the correct operation of the television, you need to correctly choose a time zone that is selected in Samsunge through the “Country” parameter. It was also found that among the pre.installed parameters “country” is England, Austria, Slovenia, Czech Republic, another country, but not. (Strange for TVs produced in the “Other Country” value corresponds to the 0 hour zone (Greenwich) and also gives three hourly displacement of television programs.Tell me, is it possible to somehow correctly set the time zone on the TV or you need to wait until Samsung releases the next patch?tell me there is a solution on this problem

In my opinion, no one closed your topic. Maybe just forgot your username and password?Now on your topic. Most likely, there will be no new firmware for TV series. They have not been since August last year. As for the time adjusted time, then in the TV-series it can already be done in this way.A more convenient way to adjust the time will be ready soon. Pay attention to this post.

Gao_atc wrote: And what model you have what?LE37C530F1W

Aleks-78-78 wrote: LE37C530F1WUPS. S-Series. Here, perhaps, you should wait for updates or use this advice. It can help.

In St. Petersburg, this method did not roll, the receiver found 8 digital channels, but the time still was not correct left.

The specified method on the TVs UE32B7000WW and UE55b7000ww does not work.This firmware is simply not placed. TVs write that there are no files for updating. In general, the firmware is always put with problems with problems, some are put, others are not put and you need to wait for the next, horror. I have two more TVs. Sonyki, so there are never any complaints.Andrew.

Anarcia wrote: the specified method on the TVs UE32B7000WW and UE55b7000ww does not work.This firmware is simply not placed. TVs write that there are no files for updating. Andrew.Most likely this is due to the fact that you have current firmware of older versions (3001 or 3002). You need to roll back the firmware for 3000.G. Try to ask your question here.

Gao_atc wrote: Anarcia wrote: the specified method on the TVs UE32B7000WW and UE55B7000WW does not work.This firmware is simply not placed. TVs write that there are no files for updating. Andrew.Most likely this is due to the fact that you have current firmware of older versions (3001 or 3002). You need to roll back the firmware for 3000.G. Try to ask your question here.I solved the problem, and I learned a lot of interesting things about my TV.Thank you very much for the link.Andrew

Colleagues, TV40ku6300 TV. Updated to the latest version and the television gym stopped showing the schedule of films. What are we doing? time, date, time zone stand correctly.

Try to re.search and save channels

If the user does not work for a television gym on the TV tricolor, then the equipment works incorrectly, and the problem has to be urgently fought until it has grown into serious problems. Even the fact that the mentioned function is practically not used by the subscriber, should not affect his actions. Telegide, which is indicated by its name. a kind of guide for current and future broadcasts. It includes a television program and a short announcement of the program. And its main positive side is the availability. The program is shown on the television screen, and therefore you can get important information at any time.

Why does a telegide not working on a tv tricolor

For the first time, faced with the fact that a television guide disappeared on a tricolor, users need to understand the possible causes of malfunctions. Typically, the receiver does not show the program of the programs of federal and paid channels due to:

• incorrectly set time (sometimes errors are associated with the accidental transition of the device to summer or winter time);
• malfunction of equipment;
• the need to establish an update;
• serious breakdown of technology.

Naturally, to understand the causes of what happened and understand what to do without professional repairs, it is not easy. Therefore, subscribers will have to consistently check all possible sources of trouble. It is advisable to start with the simplest so as not to waste time on complex, but possibly useless actions.

How to turn on a telegide on a TV tricolor

Having sorted out the reasons for the absence of a telegis on the tricolor, you should proceed to the restoration of the function. To enable the program of the program, you will need:

• Open the receiver menu and find a section on time;
• set the right date and exact time;
• save the selected parameters;
• check the result by recruiting the receiver.

If the indicated approach does not help, you should think about resetting settings to the factory level. This universal technique is recommended for almost all errors.

• Open the menu;
• find a subsection with the mention of the basic or factory level;
• make a reset;
• Reload the premium;
• set the starting parameters, including an hour.long belt and time;
• Search for channels.

Samsung TV settings instructions

Many owners of television equipment from Samsung are faced with various kinds of problems in the process of self.setting up basic parameters. Especially when it comes to Smart TV models.

In fact, Samsung TV setting is far from the most difficult process, the main thing is to follow the instructions, and then you can achieve the necessary result, while spending a minimum of free time. Of course, at first it is advisable to study the tips for setting up the TV, this is exactly what will be discussed now.

How to fix a telegis on a TV tricolor

Do not wait for a mistake with a television gym will be decided by itself. If you really need this function, then fulfill all the points of our instructions and the television program will work for each channel. After all, many subscribers are faced with this problem.

Independent setting

If the channels are lost suddenly, and on your part, all the terms of the contract with the tricolortVs are met (there are no debts), the problem can be solved by independent reconfiguration of equipment.

• Make sure that the antenna is installed correctly and nothing interferes with it. it does not stick dirt, snow, etc.D. They did not turn the antenna, did not damage, and all the cables from her to the receiver in working condition without breaks and scuffs.
• Open the infobanner (button F1 or I) to check the signal level that your equipment accepts. Value should be higher than 70 percent.
• If the value is below, try to slowly turn the antenna until the infobanner displays the desired level of admission.
• After that, you can try to restart the receiver in the standard way-turn off, wait 10-20 seconds, and then turn on. Channel recalculation should automatically occur.

If the signal is still more than 70 percent, make sure that nothing interferes with the antenna, after which you can try to start automatic channels:

• Open the menu of your TV, go to “Settings”.
• Select “TV channels”. “automatic mode”.
• Wait until the recalculation procedure is completed.

If after that you still have the channels out of availability, and errors arise, you need to drop the receiver to the factory settings:

• Go to the “menu”.
• Select the “Installation” or “On receiver” item (may vary depending on the receiver model).
• Select the “Factory Installations” item and confirm the reset.

Confirmation of the reset can occur both through the F1 or I button, after which you can press yes, and just by pressing “yes” after the question “you are sure?»The method depends on which model of the receiver you have. Detailed instructions for each model can be found at the link: https: // www.Tricolor.TV/HELP/Technical-SSUS/VOSSTANOVLENIE-SPISKA-KANALOV/.

If the channels are lost due to the fact that you have not updated software, it is recommended to carry out this procedure through connecting to a satellite or to the Internet.

! In the settings, some receivers make users undergo authorization of the antenna again. you will have to choose a region, antenna settings, the name of the provider, etc.D.

At the end of any way, you should wait until the receiver completes the search for channels, and save them.

Ways to solve the problem

To eliminate the problem of the lack of television broadcasting free channels is worth checking the correctness of the cable connection. If everything is attached correctly, then other actions should be performed.

Checking the work correctness of the equipment

To check the functioning of the equipment, it is necessary to reload. Execution scheme:

Having made a restart, the equipment goes into the usual operating mode. If this does not happen, then you need to click on the display of the information channel (should show regularly). In the absence of television broadcasting on the infocanal, you can judge the malfunction of the setting functions. You should begin the stepping step of the settings to the factory (installed by the developer).

Reset receiver to factory settings

The provider recommends using the settings discharge operation in all difficult situations of the television post. When returning to the initial factory installations, the equipment begins to work again in most cases. Scheme for the discharge of mood functions:

It is worth considering that in the case of the end of the paid period of the subscription to the tariff, the basic list of television channels is sent to the end of the entire list. Therefore, they are after 100 channel.

If the actions carried out did not help, it is necessary to check the cable move from the plate to the receiver. And also pay attention to the strength of the plate and its orientation. When identifying a cliff or violation of orientation, to set up a plate and perform a repeated search for television channels.

Software Update

In order to improve the show and protect against unauthorized access, the provider recommends regular software updating. If this operation is not performed in time, then the show of television channels can be stopped. The software update should be carried out when the new system of system support is released so that a further display of channels is available.

Do not turn off the power during the update for.

To update, use the “Updates” item in the receiver menu. The course of the operation implies the inclusion of equipment to prevent partial rewriting files. Random rewriting will lead to a violation of the functioning of the equipment and lack of broadcasting.

Smart card reading error

If there are no rooms, then the device cannot recognize the card used. This is due to the incorrect installation of the card in the cartel, a malfunction of the card receiver itself, the inconsistency of the card located inside with the software used, and the receiver breakdown.

Read more about the problem with Smart card

After checking the correct insert of the card, the ID number should appear. Otherwise, it is necessary to check the operability of the Smart card (on other equipment) or exclude problems in the receiver work.

Data is not confirmed

Data confirmation is required if the user did not do this before. To confirm them, the subscriber can use the services of a personal account on the Tricolor website or make a call to the technical support, where the operator, when indicating the ID number and contact details, will be able to confirm.

Basic channels do not work, information works

If the information channel shows, then the problem of the absence of the television post of basic channels occurs due to the invitement of the subscriber or invisibility of the Smart card. Data confirmation was described above. The visibility of the card is due to the correct installation of it in a working cartel. Information about the solution of the problem that appears due to the impossibility of reading the card was indicated above.

Changing the price for the base package

The company can change the for the packages, which will affect the lack of broadcasting of television channels. for new tariffs are provided for both newly connected subscribers and long.lasting services of the company. Infocanal warns of a change in tariff policy, so the subscriber must pay the required amount to the account in time.

Tricolor cunning (basic channels do not work through the fault of the provider)

The company Tricolor offers subscribers payment of the package provided in parts. If such a payment method is selected, then the components are paid until a certain date. With a lack of funds on the subscriber account, the company does not guarantee the television room of the basic channels.

As well as with unilateral termination of the contract, the user may lose access to viewing basic television channels. After all, the contract states that the provider is not responsible for the correctness of broadcasting free channels.

If all methods are tried, and the problem is not solved, then you should contact Support. The operator will explain what to do in such a situation.

Telegide: This is a digital television program for TV tricolor, given in real time through a satellite. Therefore, sometimes to download data may take up to ten minutes. The error “no data on transmission” is possible ”

, or “on this channel, the program is absent or not yet loaded. All this can lead to failures in the work of the receiver.

First you need to understand the reasons. why the television gym does not work:

• Incorrectly set time at the receiver itself;
• There was a failure in the operation of equipment;
• Outdated firmware or a receiver broke;

Of course you can’t leave equipment in this state, so you need to look for a solution. The simplest solution to the question is to contact a specialist who installed your equipment. In addition, you can try to contact TV TV TRICOLOR specialists by phone of a hot line.

All free channels are completely absent, including federal.

Channels from 1 to 20 are highlighted for the base package of ticolor broadcasting. It is free and accessible by default users. One of the reasons why the first 20 channels for TV tricolor disappeared is the provider’s policy described in the service contract.

Important! If the subscriber buys a card with a limited, usually seven.day, validity period, after it is completed without making money to the Basic broadcasting, it stops. Also, the system does not show free federal channels with unilateral termination of the contract by the company Tricolor.

But the most common reason arises in the user equipment. With improper installation of the card, federal channels always do not work. To make sure that this reason causes problems, it follows:

The input methodology for the desired section of the menu may differ in different models of receivers, but is always set out in the instructions for operating the device. If the prefix writes that the Smart card is not inserted, it should be checked and reinstalled. For this, the receiver is turned off. The carrier is pulled out of the nest, inspected and, if necessary, the contact sites of its chip are cleaned.

The card should be inserted according to the instructions for the equipment. The usual technique. side with the arrow up, in its direction, tightly and until it stops into the nest. Having turned on the receiver, it is worth checking again whether the identification bearer has determined.

Other problems

There are still possible reasons for the violation of the signal from the satellite. In 50% of cases, the reason for the lack of a signal is the converter, or rather its failure. It is often impossible to determine the converter breakdown with the naked eye, this is precisely the problem is the problem. But for security, it is better to have a spare converter, which can always be installed in place of your.

It is better to check the operability of the converter before trying to adjust or complete the antenna setting up, because if the converter turns out to be non.working, all attempts to configure the antenna will be unsuccessful. If you have a spare converter, just dismantle the converter installed in the holder and install the new one, while there is no need to weaken the fixing nuts and knock down the antenna. If there is no possibility for replacing the converter without turning the antenna, weaken the antenna and turn it to replace the converter, and after replacing it, put it by eye, and then resort to smooth scanning of the horizontal and vertical plane.

Why did a television guide on Samsung stopped working

Crap. And I’m tormenting the settings. I thought she was getting somewhat

Valentina Nikolaevna

Max Smirnov

It seems to me- this is for everyone

Alexey, well, what public I am writing? Obviously not in Tambov!

Max Sergeev

Newspaper with TV program now to help us

Why did a television guide on Samsung stopped working

Alexandra, it means that the case is in the TVs themselves, maybe it depends on the manufacturer?

I haven’t been working on LG since yesterday, but yesterday I was picking in the settings. I thought that I was reconfiguring somewhere.

Galina, I probably have not been working for more than a week, not on one, not on the other

I also noticed yesterday that it doesn’t work on LG I wonder why.

Anna, dumb sanctions

Alena, eh how to live further without a television The campaign will have to buy a television program

Anna, by the way, seems to be trifles, but the convenient function is still

Alena, yes but we will tolerate you won’t take us so simple

Anna, this is yeah

Elena, and on Samsung too

Whose TV telly was reset there and stopped working. I already set everything in the Samsung settings and found nothing. Maybe something else can, if something settings to everyone.

Alexander, maybe he will earn someday

Evgenia Turtle

Evgenia, I thought so too, I understand the American TV or what else, but our. Why so?

Evgenia Turta answered Alena

Alyona, ran around the Internet and found such information (if they don’t lie): the problem with the televis is not only in our city, in general in the country in general. It’s not about TVs, but in, Sobsno, Service supplier, t.e. the most digital broadcasting. Someone wrote on a hot fishing line for a trimmer and they answered that preventive work was underway when it ended is not known.

Why did a television guide on Samsung stopped working

May 2022 for digital television viewers, programs of programs on TV screens disappeared.

At first there were messages from the eastern part from Siberia. This affected NTV, Wink and Video and Content Sound was conveyed in normal mode.

It was assumed that the server “service TV” was hacked and this affected the television. Everything touched by Smart television and digital console operators TV.

Instead of program programs, political textual slogans of a provocative nature were transmitted and they concerned well.known events in the country. It could be assumed right away that this all came from the state known to us. “neighbor”. http: // www.Bolshoyvopros.ru/Questions/4014132-Pochemu.?

It feels like we have some suckers, disgrace and what can be said about more serious things in our aye.

Danil Cherkashin

Danil, no, everything is the same (as expected)

On the RTRS channel, I wrote about the lack of a television. Message: in the near future it will be restored. And this nearest is already lasting the fourth week. What kind of armless experts are this and cannot solve the problem? I wrote in and my appeal was sent to the Office for the Volga-Vyatka Region. What can solve the problem in this office. Very big doubts. Patience burst and I even sent a letter to the Kremlin, which was sent to the mincifers so far there are no answers from the consumer supervision and from the Ministry of Construction.

Aleks, of course it is easier to turn off everything, stab with boards, to fight, than to fight hacker hacks!

Aleks, fuck. Of course, the simplest, cut off the function size and head does not hurt. But to fight with attacks, no, that you, not a bar’s thing.

Aleks, here is the next unsubscription of the Minzfra MajiGida: Organization-performer of the message Ministry of Digital Development, Communications and Mass Communications of the Federation

The answer to your message is to show completely. Your message 176407826 television, radio and media dated June 30, 2022. Considered. Department response: Dear Alexander Ivanovich! In connection with your appeal received by the Ministry of Cyphra, we report the absence of additions to the letter of the Ministry of Construction of the Ministry of Construction from 17.06.2022 No. P17-4-13469-og.

All these promises are only a window dressing. Everything is the same as with an emergency increase in the minimum wage. Finally waited for the promised and only 10%, although are galloping more abruptly than bourgeois! Spare parts for example rose in price by 400%.

How to update the receiver for TV tricolor

To get an update on most receivers, you need to follow the following instructions.

• Disconnect, then turn on the receiver.
• Switch the receiver to 333 channel.
• After a minute, a message with an affordable update will appear on the TV screen.
• Confirm the intention to download the update by pressing the OK button.
• The installation of updates will begin.

Depending on the model of the receiver, you need to wait for automatic reboot, or restart it yourself.

Attention!Do not disconnect the receiver power during the installation of the update, this will lead to the flood of its firmware and restore it yourself will not work out on your own.

Why does a telegide not working on a tv tricolor

For the first time, faced with the fact that a television guide disappeared on a tricolor, users need to understand the possible causes of malfunctions. Typically, the receiver does not show the program of the programs of federal and paid channels due to:

• incorrectly set time (sometimes errors are associated with the accidental transition of the device to summer or winter time);
• malfunction of equipment;
• the need to establish an update;
• serious breakdown of technology.

Naturally, to understand the causes of what happened and understand what to do without professional repairs, it is not easy. Therefore, subscribers will have to consistently check all possible sources of trouble. It is advisable to start with the simplest so as not to waste time on complex, but possibly useless actions.

How to turn on a telegide on a TV tricolor

Having sorted out the reasons for the absence of a telegis on the tricolor, you should proceed to the restoration of the function. To enable the program of the program, you will need:

• Open the receiver menu and find a section on time;
• set the right date and exact time;
• save the selected parameters;
• check the result by recruiting the receiver.

If the indicated approach does not help, you should think about resetting settings to the factory level. This universal technique is recommended for almost all errors.

• Open the menu;
• find a subsection with the mention of the basic or factory level;
• make a reset;
• Reload the premium;
• set the starting parameters, including an hour.long belt and time;
• Search for channels.

How to configure a telegis

If the described measures do not help tune a television gig on a tricolor, it remains to check and install updates.

• Visit the official website of the provider;
• Find a section with a description of the receiver used;
• see the current version of the software;
• turn on the receiver;
• Press the “Status” button on the remote control;
• View the established version.

To install updates and restore the program of programs to and foreign channels, enough:

• enable the provider’s information channel (usually 33);
• wait a few minutes of the appearance of the message with the proposal to upgrade;
• start the process and wait for its complete completion (you cannot interrupt).

The function does not require additional preparation for work, so think how to configure it, subscribers will not have to.

Telegide Tricolor TV for today

To see the program program for today and turn on the television guide, just press the same button on the remote control. If this does not help, and the function does not work or a television program has disappeared on individual channels, you should call the contact center. Hot line phone of a satellite operator 88005000123. Consultants will definitely tell you what to do to restore the correct, full.fledged work of the receiver.

1 Comment for “Telegide for Tricolor TV. Instructions for Setting”

Help, ATP! I sat without a program for more than a year))

To get an update on most receivers, you need to follow the following instructions.

• Disconnect, then turn on the receiver.
• Switch the receiver to 333 channel.
• After a minute, a message with an affordable update will appear on the TV screen.
• Confirm the intention to download the update by pressing the OK button.
• The installation of updates will begin.

Depending on the model of the receiver, you need to wait for automatic reboot, or restart it yourself.

Attention! Do not disconnect the receiver power during the installation of the update, this will lead to the flood of its firmware and restore it yourself will not work out on your own.