What to do if you hear music through headphones. What to do if you don’t hear a voice…

There is no sound in headphones on the phone: 10 tips to those who have disappeared

In general, the phone, judging by statistics, is much more reliable in terms of sound than PC (this is in Windows-either the wrong sound card is chosen, then something is connected, then in BIOS something is wrong, etc.P.). However, not a single trouble.free gadget has yet been created.

In this small note, I decided to collect 10 most popular tips and recommendations that help with “low blood” to solve the problem of lack of sound in headphones on the phone. I do not claim the truth in the last instance, but the trifle below is covered by most of the reasons for the current problem. So that.

If you still have any sound, but it is bad or too quiet, I recommend that you familiarize yourself with this instead of this note:

1) poor sound in Bluetooth headphones: it is interrupted, there are delays, light hiss, etc.D.

2) how to increase the volume on the phone (Android). Too quiet sound

How to return the “missing” sound in headphones: what to pay attention to

The first recommendation is banal and simple. try to restart the phone and check the sound settings. Perhaps some kind of “quiet” mode in the parameters of the phone is turned on.

If you have wireless Bluetooth graters-keep in mind that sometimes they turn off (“fall asleep”). Try them to open./ON., so that they establish the connection again. In many cases it helps!

Besides. Look at the volume level directly in the application that your mp3 file reproduces, or radio, or something else.

If you have wired headphones. pay attention to the condition of the wire, especially near the plug

Very often in this place due to constant excesses-there is a break in copper veins, and contact becomes not stable. If you slightly move the wire (in this place). perhaps you will have a sound for a moment (then the reason is obvious) !

In any case, it is recommended to double.check the headphones on another (obviously serviceable) phone/PC/laptop.

Pay attention to the audio line, whether something has got into it? Often, dust, scruffy pieces of threads (from the in which you wear), and pr. trash.

To clean it, the following can be recommended:

• Take the usual toothpick and wrap its end with cotton wool;
• then moisten it in alcohol;
• After that, carefully insert a toothpick into the audio connector and make several rotational movements;
• As a rule, all dust and garbage settled on cotton wool. By the way, if after the first cleaning it was dirty. The procedure should be repeated.

On the upper panel, when connecting the plug from the headphones, the corresponding icon should light up. over, in 98% of cases, regardless of whether the headphones or wire themselves are working: the main thing is that the audio connector and the plug are in order.

If this does not happen, it is highly likely that the audio connector is faulty and it needs to be replaced.

If we are talking about wireless headphones, check if they are charged (usually when they turn on, the light indicator lights up).

By the way, new headphones always usually go discharged “to zero” (for security purposes).

To help!

One wireless headphone does not work, it stopped playing the sound. https: // ocomp.info/ne-rab-besprovodnoy-naushnik.HTML

Is the headset enabled. Pay attention to the indicator

When using a headset, which previously auto, has been gathered to another phone via Bluetooth, can lead to the fact that the mating function will be disconnected immediately after turning on the devices.

Try to run the conjugation manually: click the power button until the indicator begins to blink with blue-red color.

Check in the phone settings. Whether Bluetooth is turned on, and whether the headphones are visible in the list of connected devices (relevant for a wireless headset).

In general, I would recommend the following:

• Remove Bluetooth from the list of devices: headphones, microphones, etc. gadgets that you previously connected to the phone;
• After, turn off the work of Bluetooth in the phone settings;
• Reload the device;
• Then turn on the Bluetooth again and perform the association procedure with headphones.

Settings. Connection of the device. Bluetooth

If you use adapters to connect headphones, pay close attention to them.

Not all of them are back-composed, and come up to all phone models. On the same Xiaomi, one often has to face the “chips” from the manufacturer, the devices of which are required by “native” adapters and adapters.

It will not be too superfluous to try to connect a deliberately serviceable headset to the phone (moreover, if you have previously stopped working, you should try wireless/and vice versa //-).

The main thing is to find out here: will the headset work with another integer work. If all “OK”. then it can stop on it. Well, you can order a headset for cheap in Chinese online stores, links below.

In case of infection of the phone with viruses, the appearance of critical systemic errors, glitches, etc. “Good”. it is worth trying to drop the device to factory settings (it is important: in this case, the contacts and files from the phone’s memory will be erased and removed. make them backup in advance).

To help!

How to reset Android settings to factory [Hard Reset] (T.e. Delete all data from the phone, tablet).

If you managed to somehow solve the issue differently. Let you know in the Комментарии и мнения владельцев (thank you in advance).

Why are my headphones connected to the outlet, but the sound comes from the speakers?

Windows programs, mobile applications, games. Everything is free, in our closed telegram channel. Subscribe 🙂

Possible reasons for this problem can be as follows:

• Perhaps you have incorrectly connected headphones. Therefore, make sure that there is no weakened connection and your headphones are correctly connected.
• The problem can be caused by faulty headphones. So, make sure that the headphones work by checking them on another device.
• If the sound comes from speakers even with connected headphones, it is likely that you have established speakers as an audio device by default. If the script is applicable, you can solve the problem by installing the headphones as an audio device by default.
• It can also be caused by damaged or outdated audio/headphones. Therefore, you must make sure that you have the latest versions of the drivers for audio/headphones to solve this problem.

How to disable the sound from speakers with connected headphones?

To eliminate the problem, you should make sure that the connection is absent and the headphones are in working condition. In addition, run a means of eliminating the sound problems, install the headphones as an audio device by default or update audiorauders.

Here are the methods that you can try if you have connected headphones, but the sound is played from the speakers:

• Make sure you have connected the headphones correctly.
• Check the headphones with another device.
• Reload the computer.
• Install headphones as a default audio device.
• Make sure your latest versions of audio/headphones are installed.
• Launch a means of eliminating the sound of sound.

1) Make sure you have connected the headphones correctly

The first thing you should do is make sure that the headphones are connected to the computer. So, check the presence of a weak connection, and then try to reproduce the audio file. You can turn off the headphones from the system, and then connect them again to PC. If the problem is fixed, your headphones were connected incorrectly. If the problem is not a poor connection, go to the next potential correction to solve the problem.

2) Check your headphones on another device.

In addition to the above method, you should also make sure that your headphones are not faulty. To do this, connect the headphones to another device, for example, a mobile phone or laptop, and see if it works properly. If the headphones do not work with another device, most likely your headphones are damaged, and you need to replace them with new.

If your headphones work with some other device, go to the next potential correction to solve the problem.

3) reboot the computer

After you make sure that the problem is not in headphones, try to restart the computer. Often all you need to do is reloading to solve the problem. If the problem is caused by a temporary failure on your PC, this method should help you.

This will clean your RAM and will launch your computer in a clean and fresh state. So, just reboot the system, and then try connecting the headphones and see if they work normal.

4) Install the headphones as an audio device by default.

You must also make sure that your headphones are installed as a default audio device in your system. This problem is most likely if you have chosen the speaker as a default audio device output. So, you need to check and install headphones as a default audio device to solve the problem. Here’s how to do it:

• Firstly, click the sound icon on the taskbar with the right mouse button, and then select the “sound settings” parameter.
• Now scroll down and click “Additional sound settings”.
• In the window that appears, go to the playback tab.
• Then make sure that your headphones are selected as an audio device by default. If not, click on the headphone with the right button and select the parameter “install as a default device”.
• Finally, press the OK button to save changes.

Now try to reproduce the audio file on your PC, and then check if the problem is solved.

5) Make sure your audio / headphones are updated.

Problem problems on PC are often associated with damaged, faulty or outdated audio.divers. So, if you are faced with a problem due to damaged audio, you can solve the problem by updating the drivers of audio and headphones.

Now there may be several options for updating audio/headphones in Windows 11/10. First way: you can manually update audioraiters using the device manager or “Settings” application. If you use USB or wireless headphones, the driver requires proper work. So, make sure your system has this particular driver.

You can also visit the official website of the manufacturer of your device to get the latest versions of the drivers. You can even use Realtek High Definition Audio Manager if you have Realtek HD Audio drivers.

If you want to automatically update the audio.radiopriers without looking at too many options and without completing the Internet, use a free tool for updating the drivers. Just download and install it, and it will automatically find and update your sound, as well as other drivers.

After updating the audio/headphones, reboot the computer and connect the headphones. See if the problem has been solved. If not, try the following potential correction to solve the problem.

6) Launch a means of eliminating the sound of sound

Windows provides a built.in means of eliminating no sounds with sound that can detect and eliminate the problems associated with sound on your computer. So, if nothing works, try to launch a means of eliminating the sound of the sound provided by Windows.

He should be able to determine the exact cause of the problem, and then offer the correct corrections to solve the problem. Here’s how you can launch a means of eliminating the sound of sound in Windows:

• First, open the “Settings” application using the Win I hot key.
• Then go to the System section. Elimination of problems.
• After that, you need to click on the option “Other means of elimination of malfunctions” to find a means of eliminating the sound with the sound.
• Now find a means of eliminating a malfunction with the reproduction of audio among other means of eliminating problems, and then click the “Perform” button located next to the removal of malfunctions with the sound reproduction.
• Now Windows will begin to find problems with sound in your system, and then display problems with the sound you are dealing with. Along with this, Windows will also offer solutions to eliminate problems. You can apply the most suitable correction and wait for the completion of the process.
• Finally, try to reproduce the audio file and see if your headphones work normally.

What to do if you do not hear the voice in the headphones on the phone

First of all, you need to recall whether moisture fell into the headphone jack, as well as carefully examine the headset itself. If there are cable breaks or wiring depart from the shank, then everything is simple here: you need to go to the store for a new set. In the event that water got into the jack connector, contacting the service center, where faulty components will be replaced.

If the voice in the headphones disappeared unexpectedly at the time of listening to the video or audio, a hardware failure may occur. Reload the device. If no options have helped, you will have to correctly configure the audio production parameters:

• Go to the settings through the main menu.
• In the list find the item “Sound”.
• Scroll the page down and press “audio effects”.
• Activate the item “Audio Headphones”.
• In the point “Type of headphones” select the used set.
• Deactivate the 3D-Audio option to avoid interference and muffled sound.

On the smartphone, we recommend that you disconnect the vocal assistants “Siri” (iPhone), Google Assistant (Android) or Alice (Yandex Browser). Virtual assistants often work in the background and can dramat the main sound in headphones.

Sounds with sound in wireless headphones on a computer and phone

If there is a lack of voice or a muffled sound, the case is in the Bluetooth profile. Only paired devices using the same connection profile can correctly exchange data.

When connecting to a computer, laptop or phone, the HSP profile (the main interaction protocols) is activated, and A2DP (transmission of stereo signal) is deactivated. By default, they should work together. To fix the failure on a stationary computer, you need to find another audio output on the front or rear panel.

On the laptop you need to change the recording settings:

The sound in the headphones will immediately restore. What is the reason for such the work of some wireless sets is unknown. Pay attention, if you activate the microphone again, then the problems will return. We recommend buying a separate microphone, for example, USB.

On smartphones, the problem is fixed even easier:

With the conjugation of devices, synchronization will not be carried out, thereby excluded software problems with the sound. Thanks to this, the volume adjustment is performed independently.

If there is no voice in headphones, first of all, you need to check the integrity of the cable itself from Jack to the tail. In the absence of visible malfunctions, you can adjust the recording and playback parameters, but sometimes the microphone becomes the cause of the problems. Most of the breakdowns can be eliminated with your own hands without contacting the service.

Sounds with sound in wireless headphones on a computer and phone

If there is a lack of voice or a muffled sound, the case is in the Bluetooth profile. Only paired devices using the same connection profile can correctly exchange data.

When connecting to a computer, laptop or phone, the HSP profile (the main interaction protocols) is activated, and A2DP (transmission of stereo signal) is deactivated. By default, they should work together. To fix the failure on a stationary computer, you need to find another audio output on the front or rear panel.

On the laptop you need to change the recording settings:

The sound in the headphones will immediately restore. What is the reason for such the work of some wireless sets is unknown. Pay attention, if you activate the microphone again, then the problems will return. We recommend buying a separate microphone, for example, USB.

On smartphones, the problem is fixed even easier:

With the conjugation of devices, synchronization will not be carried out, thereby excluded software problems with the sound. Thanks to this, the volume adjustment is performed independently.

If there is no voice in headphones, first of all, you need to check the integrity of the cable itself from Jack to the tail. In the absence of visible malfunctions, you can adjust the recording and playback parameters, but sometimes the microphone becomes the cause of the problems. Most of the breakdowns can be eliminated with your own hands without contacting the service.

And finally!

Waiting is one of the ways to eliminate the problem. Yes, you have to wait a day or even two. There is a chance that the malfunction will disappear by itself. It sounds fantastic? Believe me, this happens.

Nothing helped? We’ll have to turn to service employees for help, who with the help of special equipment diagnose a defect, perform high.quality cleaning, eliminate the defect if the speaker does not work on the phone when talking.

I hear myself in headphones through a microphone

Connect the headphones to another device. It often happens that the accessory connected to the computer gives an erroneous sound, and when connecting to the phone, the problem disappears.

Connect another equipment to the PC connector (columns, etc. D.).

The procedure for incorrect work of the headset:

• We try to change the settings, for this we pass the control panel along the way. equipment and sound (sound). playback. On the last tab, select the headphones and press the properties. levels. button balance. On the left channel we set 50, with the right side we will have to experiment at different levels until you reach the optimal sound of the voice.
• You can set the value of the left part 100, right. 0. According to users, this method has helped many to restore normal sound.

As an option, in the section Properties go to the additional features section and turn off all the effects in the window if they are activated.

In the case of a cable break for independent repair, knowledge of the basics of soldering is necessary.

The device will help determine the place of cable damage. The wire can most often be wrapped around the headphones or next to the plug

Carefully clean these areas and check for integrity. Then eliminate the problem

If problems with the accessory are not found, let’s start with the audio entrance to the PC:

• We examine the nest, when the extraneous inclusions are detected, carefully remove the pollution.
• Mechanical damage to the contact part will require port replacement. It can also be fixed on its own with the help of soldering, eliminating the places of cliffs on the tracks.
• In some cases, the plug can hang out in the connector. Make sure the connection density, in case of poor contact, purchase an adapter.

We proceed to checking the software part:

We check the relevance and performance of the drivers. Start. control panel. sound, activate the device manager. In the window that opens, we open the point of sound, video and gaming devices. We look if there is an exclamation mark next to the desired device. Using PKM, select in the context menu “Update Drivers”.

The “Karaoke” tool can be found and disabled if the properties are in the section using the improvement tab. If there is an activated point in it, the vote suppression, remove the flag.

The Windows Sonic option (voluminous sound) is turned off into the track, use PKM on the speaker image and select a spatial sound (turn off).

If a problem arose on a smartphone, we act according to the scheme:

If you recently installed a new utility for sound (for example, an amplifier), then we try in stages (depending on the result) methodology:

In our article, we set out in detail the possible reasons for the lack of voice in the headphones and ways to eliminate problems. We hope that the material helped you solve this issue.

What to do if you hear music through headphones

And I don’t play any headphones at all, or rather, it plays only as a pipe, which can be. and I did not want new ones, I don’t want to ((((

Aigul Saparova: Management Panel-Zvuk-Svyarovy-Urenniki-Headphones.Balance levels, just configure the balance between sound and voice) Thank you!)

Panel exercise. Sounds. Properties of dynamics. Improvements. Remove the checkmark that will help you. I was helped by removing the box from the point “Suppression of the voice”

Whoever has no words in the songs, everything is corny simple, a headset or through what you listen to music does not reproduce stereo. You have a channel (track) with a minus, the kapa lies on another channel. Output: put an application where there is a switch to mono. By the way, it’s easy to check whether the trouble is, download Totalcommander Open the muses. The file through it and the equalizer has a runner of disconnecting one of the “ear”, move, a voice appeared? In the settings of the phone itself, you can also find stereo/mono. If the device itself without the use of a minijack does not play a voice, then look for an application with switching to a mono mode.

If a PC is like a trab, look at the minijack plug, stereo or mono, if mono, turn off one of the channels. Photos of mono and stereo jacks watch in search engines, I will not bother with your mobile.

Svetlana, yes, you are right to the end you do not need to put the headphones! My big headphones broke down and the same trouble with them! But, it will be a sound only from the left channel. Mono-sound, without stereo! It seems that nothing, but it is stronger to listen to your favorite music, watch movies and videos in the spinning of volumetric stereo-sound!) If the headphones are not quite new. Perhaps they broke and need to be repaired, or buy new. You can check. Connect the headphones to another device (phone, player, tablet, computer) and see how they work. If in all cases it is bad. exactly broke. And if the phone is good and on other devices. bad, so the headphones are suitable only for the phone (maybe this is a headset).

If the headphones sound incorrectly. The voices of the performers are poorly audible, or there is no voice at all, but there is only music (and not all) and backing vocals. No need to put the headphones to the end! My big headphones broke down and the same trouble with them! But, it will be a sound only from the left channel. Mono-sound, without stereo! It seems that nothing, but it is stronger to listen to your favorite music, watch movies and videos in the spinning of volumetric stereo-sound!) If the headphones are not quite new. Perhaps they broke and need to be repaired, or buy new. You can check. connect headphones to another device (phone, player, tablet, computer) and listen to how they work. If in all cases it is bad. exactly broke. And if the phone is good, and other devices are bad, then the headphones are suitable only for the phone (maybe this is a headset). There is also a way: in the Audio settings in PC change the sound path. not two channels (stereo), but one, either left or right. Only this method will not help when playing sound on the Internet. You can’t choose an audio channel there, so the first method is better. All success!

Merry, but if my headphones in the computer can be perfectly audible, and only the music is heard on the phone as if echo and there are almost no words, like a minus, and when you insert everything normally.

Why do everyone hear my sounds in Discord

The fact that the sounds of the game are heard in the discord is a frequent problem. Before proceeding with its decision, it is worth understanding the possible reasons, find out the circumstances of the malfunction:

• Cheap equipment. Often interlocutors hear sounds in headphones, this is due to the acquisition of inexpensive equipment. If no solution to the problem solves the problem, it is more likely to go for new, more expensive headphones;
• Stereo mixer. Certain games have a function-to block the sound in the discord, because of this, the interlocutor hears not only the voice of a friend, but also sounds;
• The problem of drivers;
• The sound can be broadcast through the headset connected to the wrong connector.

Reasons associated with audibility, a lot. However, the common are listed, those whose decisions will help to make sure that the discord does not hear my sound.

What to do to turn off your sounds in the discord

When friends hear sounds, even with a microphone turned off, this is unpleasant for both sides. No one excludes the option of equipment malfunction-this option is taken into account the first thing, turn off the headphones, set them through the discord settings, PC, check the performance on another computer, whether the same problem is repeated through another device, another input, check the work of the stereo mickester. Banal option. first restart the computer to make sure that you do not need to resort to the problem globally, climbing into settings.

Checking the stereomiksher

The inclusion of a stereo miksher has no value for games, a discord, as it transfers the input signal to the output. Therefore, the first thing is to start turning it off.

Winr hot keys are used to turn off the stereo miksher. Take “Control” in the line. The user opens the “control panel”, find “sound” in the window that appears (to find it, you need to change viewing to large icons). Open “Record”. Under all devices, choose a stereo-miksher by pressing it with the right mouse button. “Disable” if he was not disconnected by default.

Next-disconnect the stereo miksher in the discord. Enable the “user settings”, “Voice and Video”. It is necessary to compare the devices, or leave standard settings, having previously checked that the “input device” is an installed (used) microphone, “output device”. headphones, speakers.

After the actions made, make a test call to a friend, check if the sounds of the game, computer can be heard. If not, the problem was in the mixer, yes. to correct further.

Checking the quality of the headset

As mentioned above, cheap headphones infrequently, but cause such a problem. It can be in different things, but, as a rule, the sound can be heard because of the cheap material that transfers vibrations what the user hears in a microphone. Inexpensive headphones tend to transmit sound from headphones to microphone. The problem of cheap equipment is not subject to solution. only the purchase of better headphones will save the situation.

Therefore, the first thing that is always worth thinking about when buying a headset is about its quality, checking friends, acquaintances, lastly about the price. Of course, no one offers the purchase of headphones for 10,000, but also for 100 good to find it is not something difficult. it is simply impossible.

We remove the extension cords

People, as a rule, connect all the necessary wires directly to the system unit. At this time, the headset can be connected to the keyboard. In this regard, the keyboard assumes a certain role. the extension cord. Infrequently, but when the connection is made poorly, with poor soldering, the wires are next to each other, this can cause great audibility of intra.game sounds, systemic.

To check if the problem is related to this, you need to disconnect every extension cord, a panel located in front of the block. To avoid deadly shock, it is necessary to turn off the system unit from the power supply, clamping the shutdown button. Thus, in the block there will be no current remains, which will make the shutdown safer. Connect each connector to the back panel.

After making steps, the audibility of the sounds should be disconnected. If the problem remains, the case is not in the system unit, but the computer software.

Testing on other headphones

The best way to check, the problem in the headphones themselves or the software is to take another headset that had no problems, freezes, and repetitions of sounds during conversations. It is not necessary to bite to buy a new one, it is enough to borrow from friends, relatives, friends for a while, for a few minutes.

It is enough to connect new headphones to the rear panel of the system unit, be sure to the right connectors designed for headphones, or to third.party devices. Conduct a test dialogue, if the sound is in order. the problem was the device, if not. in drivers, reinstalling, the complete removal of which must be carried out.

Democal removal

Microsoft provides good software that controls the sound. Problems may arise with Realtek drivers, if all other steps did not help, you need to remove them in order to conduct a small “experiment”. Removing drivers is a simple matter. After they are destroyed, you need to wait a bit before Windows sets the sound panel. After action, conduct a test dialogue that finds out whether the method has worked.

When removing Realtek drivers, the front panel of the system unit becomes inactive. To return the panel to action, you need to download the latest drivers updates. The installation of official sites that will not be able to bring the virus, Trojan is required.

Realtek settings

Users who need connectors in the front of the system unit, need to install again, configure Realtek drivers. Download from the official site, go to “playback devices”, go to the levels, turn off the sound of the input device (microphone), click on the dynamics for persuasiveness in the sound disconnecting. Next. go to the settings of the device, change the places of marks, controlling the audibility of sounds in discord. Turn on the panel on the systems on AC97 if it is from old series.

Any chip that “improves” sound quality, for example, the lack of echo, other things, turn off. The default function is the default. turn on. After such steps, some settings, try again.

The decisions provided will help to correct the made error, improve the work of the microphone, sound quality, voice chats. Computer sounds are an evil problem, but it happens among users. The solution is simple, even newcomers can make settings.