What To Do If Ipad Won’T Turn On

1. Check the cable and charging adapter

First of all, you need to make sure that iPad has not stopped turning on due to battery discharge. Many will be surprised, but often the problem really is that the iPad is completely discharged, but does not charge due to a broken cable or charger.

It’s easy to make sure the problem isn’t with the accessories. Try charging another device, such as an iPhone, using the cable and charging adapter. If charging starts, then the accessories are not damaged and you can proceed to the following methods.

3. Perform a “hard” restart iPad

Let’s start with the simplest way to bring the iPad to life, which is often a lifesaver. It’s not uncommon for iPad to not turn on due to a software error that needs to be reset. This is very easy to do. You need to perform a so-called “hard” reboot.

To do this, on the iPad, you need to simultaneously hold down the Home and Power buttons and hold them until the Apple logo appears on the tablet screen (10-15 seconds).

What To Do If Ipad Won'T Turn On

If the Apple logo appears. Ipad is saved! The tablet will turn on and work as before. If the “hard” reboot did not lead to anything, then you should proceed to the following methods.

Ipad won’t turn on. What should i do? 5 ways to solve the problem

The most effective ways!

Ipad is recognized as the best and most reliable tablet. Even older iPads perform well after years of heavy use. However, iPad may experience crashes, for example, the tablet may stop turning on. What to do if iPad won’t turn on? This manual told about the most efficient and effective ways to solve the problem.

Ipad won’t turn on? All the most effective ways to solve this problem are described below. We recommend that you follow one by one from the first to the last. At one of the stages, your iPad will work again!

4. Enter iPad into recovery mode

The next effective way to solve the problem is to activate Recovery Mode on iPad. Successfully Putting iPad Into Recovery Mode To Bring It Back To Life With iTunes.

In order to enter iPad into recovery mode, follow these steps:

Step 1. Press and hold the Home button on the iPad and connect the tablet to the computer using a USB cable.

Step 2. Continue holding the Home button until the iTunes logo appears on the iPad.

If the iPad reacted and entered recovery mode, you will have the opportunity to restore the tablet to work.

After entering iPad into recovery mode, you need to launch iTunes. As soon as the program starts, it signals that the iPad is found and offers to update or restore the device.

First of all, you need to try to update the iPad, as in this case it will be possible to get rid of the problem without losing data. However, if your iPad has previously been updated to the latest iOS version, then of course it will not be possible to update it.

In this case, all that remains is to select the “Restore” item. After restoring, iPad will start to turn on, but all data on it will be deleted. This method is only recommended if you’ve recently backed up your iPad data.

2. Make sure the iPad connector is not clogged

It is also not uncommon for the iPad to not charge, and at the same time does not turn on, due to the fact that the charging port of the tablet is clogged. This happens most often on old tablets that have been in active use for several years.

Clean the charging port, for example with a toothpick. It is important to proceed with caution and gently pull the accumulated debris out of the connector. In especially advanced cases, a lot of various debris accumulates in the connector, for example, as in the image below:

After cleaning the connector, try charging iPad again. If the iPad does not turn on now, go to the programmatic solutions to the problem.

5. Restore iPad in DFU mode

Ipad won’t turn on despite all the above methods? Fortunately, the most effective way to solve the problem remains. It provides for entering the tablet into DFU mode and restoring its operation using a third-party utility to fix errors for iOS devices.

Ipad won’t turn on. Restore via DFU mode

Step 1. Download the latest dr.Fone utility from the program’s official website.

Step 2. Install dr.Fone and launch the utility. In this case, it is important to close iTunes, as Apple’s program will interfere with the recovery process.

Step 3. In the main window of dr.Fone, select Repair. The utility allows you to fix various errors on iOS devices, including problems due to which the iPad does not turn on or freezes in recovery mode.

Step 4. In the window that opens, click Start to start the iPad discovery process.

Step 5. Since your iPad will not turn on, the program will not detect it until it enters DFU mode. In the next window, the utility will notify you of this. Click the Device is connected but not recognized button.

Step 6. In a new window, the program will ask you to enter iPad into DFU mode. For this:

1. Simultaneously press and hold the Home and Power buttons for 10 seconds.

2. Release the top Power button, but continue to hold the Home button for another 10 seconds. Until the utility detects your iPad.

If you did everything correctly, then your iPad will appear in the utility window:

Note that at this stage, dr.Fone utility has the option to launch an interactive tutorial showing how to properly enter iPad into DFU mode.

Step 7. After successfully entering iPad into DFU mode, click Next.

Step 8. In the new window, click Download to start downloading the latest firmware for your iPad. The utility itself will download the required firmware version for subsequent recovery.

Step 9. After the firmware has finished downloading, it remains to click the Fix Now button to start the recovery process. Make sure that the Retain native data checkbox is checked. This parameter is responsible for saving all data on your device.

If none of the above methods helped, then, unfortunately, we are talking about a breakdown of the iPad. over, the breakdown can be absolutely anything. Only in the service center will help to determine what exactly broke.

Share link

Rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram, VKontakte, Instagram, Facebook, Twitter, Viber, Zen, YouTube.

Black screen, iPhone won’t turn on or respond to buttons

Another common problem. A fully charged iPhone or iPad picked up and turned off. Pressing the power button does not start the machine. Nothing terrible happened, the smartphone automatically went into the so-called “save mode”, this happens if you very rarely restart the device.

If you have an iPhone 2G, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6/6 Plus, iPhone 6s / 6s Plus, iPhone SE or any iPad

To turn on your iPhone or iPad, just press and hold the Power button and the Home button simultaneously for 15-20 seconds, after which the Apple logo will appear on the screen.

Iphone won’t turn on or respond to buttons. What to do?

No need to panic if your iPhone or iPad won’t turn on or respond to buttons when you try to turn it on. There are two ways to quickly bring it into working order, which we will tell you about.

The first two reasons the iPhone won’t turn on are not related to hardware or software glitches. Most likely, the smartphone is simply discharged and needs to be recharged, or it freezes, in which case a forced reboot will help.

If your iPhone or iPad is discharged, connect it to the power adapter and charge it for 15 minutes, then try turning it on without disconnecting from the charger.

If the battery is completely discharged, then sometimes after 5-15 minutes of charging, by pressing the power button, you can see an image with a lightning bolt and an outlet on the screen of a smartphone or tablet. This means that not enough time has passed since charging started. Wait a little more.

On the left is a screenshot of an iOS device that is not connected to charging, on the right. It is charging:

If you have an iPhone 7 or iPhone 7 Plus

The procedure for turning on your iPhone 7 or iPhone 7 Plus is slightly different due to the latter’s Home touch button. Press and hold the Power button and the volume down button on the left for 15-20 seconds, after which the Apple logo will appear on the screen.

It is worth noting the situation with the freezing of a program, when pressing the buttons also does not help. As in the past, a forced restart of the smartphone will help.

The above situations are standard and, as a rule, are resolved elementary. However, if the solutions provided did not work, you are most likely experiencing one of the following problems:

  • The battery or power controller is out of order.
  • Defective adapter or USB cable. Replace the defective charger;
  • Dirty cable connector. Clean the cable connector;
  • Using non-original charging cable. Replace the used cable with the original one or its MFI-analog;
  • Mechanical damage to the charging connector or other mechanical damage to the device. Contact the service center;
  • Defective device. Contact your place of purchase for a warranty replacement.

If, when you turn on the iPhone or iPad, it shows the apple logo on the screen without booting the system, try to force restart the device (described above), and if using it does not bring any result, restore the device using this instruction.

Iphone won’t turn on, black screen. What to do

Iphone won’t turn on? There is a solution.

The iPhone won’t turn on and the apple is burning on it? Or is the screen completely black and the iPhone is unresponsive to button presses? Both of these problems can happen to any iPhone user without dropping the smartphone. About what to do if the iPhone does not turn on were described in this manual. You can solve the problem without going to the service center and the accompanying expenses.

  1. Perform a hard reboot
  2. Connect iPhone to charger
  3. Connect iPhone to iTunes in Recovery Mode
  4. Restore iPhone
  5. If all else fails

Connect iPhone to iTunes in Recovery Mode

If the iPhone does not respond to either charging or hard reset, the smartphone must be put into recovery mode. Here we immediately note that you may not need to directly restore the iPhone. Everything in order.

The first step is to try to get your iPhone back in working order without restoring it. This method has saved thousands of iPhones without erasing data, which implies recovery. Therefore, we strongly recommend that you initially use it.

Step 1.Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Step 2. Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (the power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (the laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo (laptop logo in iOS 13) appears.
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

Step 3. In the iTunes window, click “Eject iPhone”.

Step 4. Restart your iPhone. To do this, simply hold down the Power button (side button). You can also perform a forced reboot using the method described above.

As a result of this operation, your iPhone can turn on and work again as before without the need to restore.

Connect iPhone to charger

Often, the iPhone does not turn on and does not show any signs of life due to the fact that its battery is dead. Connect your smartphone to the charger and leave it connected for an hour.

Here are some important tips to keep in mind:

  • Use original or quality charging accessories. There have been cases in which the iPhone turned off due to a dead battery, but did not charge due to using a broken charging adapter or cable. Be sure to make sure the charger and cable are in working order.
  • Charge iPhone with electricity. Very often, users charge the iPhone from a computer USB port. But due to the old battery in the smartphone and the low power of the connector, charging simply does not occur.
  • Check if the connector is dirty. Sometimes iPhone won’t start charging due to a heavily soiled Lightning connector. Examine the charging port. If it is really dirty, clean it gently, for example with a toothpick.

⚡ How to understand that the iPhone started charging?

If the battery logo with the Lightning cable is on the screen. Iphone does not charge and asks to connect to a charger. If this logo is displayed after you put the iPhone on charge, then the cable or adapter is out of order. Use other charging accessories.

If only the battery is displayed on the screen, then charging is successful. It is worth worrying only if this logo is displayed without changes for more than 30 minutes. In this case, you should also replace the charging adapter and cable.

Perform a hard reboot

The first thing to do if the iPhone does not turn on is to perform its forced (aka “hard”) reboot. It takes the iPhone out of recovery mode, which may have been accidentally turned on, and simply resets software errors on the device.

Force restarting works differently on different iPhone models.

On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (Power button, located on the side or top of the case) at the same time for 15 seconds until the Apple logo appears on the screen.

On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for 15 seconds until the Apple logo appears.

On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then press and hold the side button for 15 seconds until the Apple logo appears.

Restore iPhone via iTunes

If the iPhone does not turn on even after connecting to a computer, then only restoration will help out.

❗ In most cases, recovery involves deleting all data from the device. You can return them only if you have an up-to-date backup.

Step 1.Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Step 2. Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (the power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (the laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo (laptop logo in iOS 13) appears.
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

Step 3. Itunes will inform you about finding iPhone in recovery mode. In the window that opens, select “Update”. Initially, you should choose this option, as it can allow you to return the device to a working state without losing data.

If data lossless recovery is possible, the iPhone update process will start. Wait for it to end. ❗ Never disconnect iPhone from your computer.

Step 4. If the update fails, you should perform a recovery. Re-enter iPhone into recovery mode (step # 2) and select “Recover” in the iTunes window that opens. Wait for the end of the operation.

Updating or restoring will return your iPhone to working condition.

Exclusive IT news, reviews and interviews

  • Home
  • About the author
  • Map
  • Popular
  • Contact
  • Rss

Blogerator.Org. What to do if iPad won’t turn on

If your iPad won’t turn on, try restoring it yourself. You don’t need to disassemble the device and remove the battery.

It’s a tradition to start the morning with a cup of coffee. Owners of iPad and other gadgets from Apple have their own morning rituals. Why waste time if already during your morning coffee you can watch the latest news, check your mail or wander around interesting forums.

With the Apple iPad, it is so convenient that you can only give up this habit when you have really serious problems.

For example, if the ipad won’t turn on. You get used to the quality and stability of Apple products very quickly, and the situation, which is usual for owners of gadgets from other manufacturers, can confuse the owner of the iPad. After all, these devices usually work for months or even years without the need to reboot or reinstall software.

And suddenly. A problem: iPad won’t turn on! What to do? Looking for an iPad service center right away, or trying to reanimate the device on your own? Let’s figure it out!

Pressing the power button multiple times probably won’t help. It is possible that the battery is completely discharged and the charging connection will bring the iPad back to life. But after all, you have probably already tried this option, and it did not help?

So, if the iPad does not turn on, try: simultaneously hold down the power button and the Home button (return to the main menu). You need to keep the buttons pressed for a long time, about 12 seconds. And, most likely, a miracle will happen: first an apple will appear on the screen, and then the loading process will go as if nothing had happened. And after that, your iPad will continue to work stably and smoothly.

By the way, the same recipe will work if the iPhone does not turn on. Please note that during this operation, the device must not be connected to the computer, otherwise the software update process will start. If you forgot to turn off your gadget right away, don’t worry. Calmly turn it off and again hold down the 2 cherished buttons.

Is the iPad working? Perfectly! The question remains: “What was that?” Experts say it’s okay. It’s just a glitch, one of the possible causes of which is an overflow of RAM. A signal to the fact that you need to urgently look for a service to repair the iPad or even buy a new tablet, such a failure is not.

But still, this recipe does not save 100% of cases. If the tablet still does not turn on, you will still have to look for an iPad service center. It’s actually not easy to choose it. If you browse one site after another, it seems that all services are the same.

Meanwhile, the situation with the iPad that does not turn on is an excellent test of the repairmen for honesty. A good service will put information on how to spice up your iPad on its website. Or tell the tablet owner about this easy method for free. If you require money for pressing two buttons, think about whether you should trust these masters with a serious iPad repair, and how much it will cost you.

What to do if iPad stuck on an apple (Apple logo) and won’t turn on?

Sometimes iPads freeze at the Apple logo on startup or restart. Most often this happens due to a failed software update, but sometimes there may be other reasons for this.

We’ll tell you what to do if your iPad, iPad Pro, iPad Air, or iPad mini is stuck on an apple. How to restart iPad if it freezes and other ways.

  • 0: Check if there is a progress bar on the screen
  • 1: Force restart iPad
  • 2: Update iPad via Recovery Mode
  • 3: Reset and restore iPad via DFU mode

0: Check if there is a progress bar on the screen

If there is a progress bar under the apple, your device is either installing a system update or repairing itself. In this case, do nothing and wait for the process to complete.

Connect the tablet to a power source and do not touch it until the process is complete.

If this is a software update, your iPad will automatically restart after installation. You may have iOS auto-update enabled and your tablet decided to download the update now. Do not interrupt downloading.

If there is no progress indicator, then the tablet is really frozen. Follow the steps below to fix it.

1: Force restart iPad

Sometimes force restarting iPad can help. The method depends on the iPad model and year of manufacture. Below we will tell you about all the options.

  • Hard restartiPadPro11 ″ andiPadPro9 ″ (2018 and newer)

Press and release the Volume Up button, then the Volume Down button, and then hold the Power button until iPad Pro restarts.

  • Hard reboot iPad, iPadAir, iPadmini and older iPadPro

Press the Home button and the Power button at the same time until the screen turns off and then the Apple logo appears on it.

In some cases, a forced restart will fix the problem and you will get your tablet in a normal state. If not, go to the next step.

2: Update iPad via Recovery Mode

The next way to solve the problem is by updating through the recovery mode. To do this, you need a Mac or Windows PC with up-to-date iTunes, and a USB cable. The method also depends on the model.

  • Recovery Mode on iPadPro with FaceID
  1. Open iTunes on your computer.
  2. On your tablet, hold down the Power button and the Volume Up button until the shutdown screen appears. Use the slider to turn off iPad Pro.
  3. Now hold down the power button on your iPad Pro and connect it to your computer using a USB cable. Keep holding the button until recovery mode is activated.
  4. Select “Refresh” on the computer screen when the recovery mode notification appears.

The update may take 20 minutes or more. If everything works out, the iPad Pro will update the system and reboot.

You can also try resetting your tablet and then restoring your data from a backup.

  • Recovery mode on any iPad with Home button
  1. Open iTunes on your computer.
  2. Hold down the power button and then turn off the tablet.
  3. Hold the Home button and connect iPad to computer.
  4. Keep holding the button until recovery mode is activated.
  5. Select “Refresh” on the notification on the computer.

Again, you can try resetting your tablet and then restoring your data from a backup if the update doesn’t help.

3: Reset and restore iPad via DFU mode

If the method above did not help you, you can use DFU mode to recover. This will erase all your data from the tablet, but then you can restore it from the copy.

  • Recover iPad, iPad Air, iPad mini, Old iPad Pro
  1. Connect iPad to computer and launch iTunes.
  2. Press the power button and the Home button at the same time and hold them for about 10 seconds.
  3. After 10 seconds, release the power button, but keep holding the Home button for another 5 seconds.
  4. On the computer screen, select Restore iPad.
  • Recovery iPadPro (2018 and newer)
  1. Connect iPad Pro to Computer and Launch iTunes.
  2. Press and release the Volume Up button, then the Volume Down button, and then hold the Power button for 10 seconds.
  3. While continuing to hold the power button, hold down the Volume Down button for another 5 seconds.
  4. Release the power button, but continue to hold the Volume Down button for another 10 seconds.
  5. Select Recovery on the computer screen.

When the tablet is restored, you can set it up as new or restore from a backup.

Fortunately, the problem with hanging on an apple does not occur very often, but now you know how to solve it. Most often, any of the methods above will solve the problem.

Option 2: Reboot

Restarting the tablet helps many users with software failures, as in the process the system is cleared of unnecessary data, thereby preventing further failures and eliminating previous ones. It can be done in different ways, but in our case we will have to use the so-called “hard” reboot. We talked about how to do this in Method 2 of the next article.

What to do if iPad won’t turn on

The problem with turning on the tablet can be caused by several reasons: a breakdown of an internal component or a failure in the system. In the latter case, simple actions that do not require opening the device can help.

Option 1: Charging

The first and most common reason iPad won’t turn on is low battery power. The tablet just turns on for a split second, the Apple logo appears on the screen, then everything goes out. In this case, the low charge icon may not appear, the user will only see a black screen.

The solution is very simple. Connect your iPad to the network using a charger and wait 10-20 minutes. During this time, the battery will be able to consume enough energy to turn it on again. Then start iPad again.

It is important to connect the iPad to the power source only through the “native” charger. If possible, do not use chargers from iPhones and other iPad models, as well as any analogs. They often overheat the tablet and this can cause damage to the tablet itself. In the screenshot below, you can compare what the iPad and iPhone adapters look like.

If, after a 20-minute charge, the iPad still does not turn on, check the functionality of the USB cable and / or outlet. Use them to connect another phone or tablet and see if it charges. If so, move on to other solutions to the problem.

What to do if iPad won’t turn on

Sometimes iPads owners face a problem when the device does not turn on or the apple icon just lights up on the screen. There are several reasons for a possible breakdown, some of which can be solved at home without contacting a service center.

Option 3: restore iPad

The most radical solution to the problem when the iPad is not turned on is to reflash and restore it. In addition, this option is the last one that a user can apply at home.

In a situation with a non-working tablet, only iTunes can help you reset the iPad and set it up as new.

  1. Using a USB cable, connect your iPad to your computer and open iTunes.
  2. Click on the device icon on the top bar.

Press and hold the Power and Home buttons. An apple icon will appear on the screen, which will go out almost immediately.

In the opened iTunes dialog box, click “Restore iPad”. “Restore and Update”. Please note that after flashing the device will have the latest version of iOS installed.

  • After rebooting the device, the system will prompt the user to configure it as a new one or restore data from a backup.
  • Option 4: Fix iOS Errors

    Another way to restore iPad is to use a third-party program that allows you to fix errors on iOS devices and DFU mode. By using this option, the user will not lose important data. In this article, we will look at how to work with dr.Fone.

    1. Connect iPad to computer and open dr.Fone. Close iTunes as it will interfere with recovery.
    2. Click “Repair”.

    Click on “Standard Mode”. This function will allow you to correct some system errors and not delete data from the device. However, the user can take advantage of the advanced mode “Advanced Mode”, where a larger list of problems is eliminated, but all data from the iPad is deleted.

    In the next window, the user will see an inscription that the device is not connected. First we have to put it into DFU mode. Click “Device is connected but not recognized”.

    Press and hold the Power and Home buttons for 10 seconds. Then release the Power button but continue to hold Home for another 10 seconds. Wait for the iPad to be determined by the program.

    In the window that opens, click “Next”. “Download”. “Fix Now”. Make sure the checkbox next to “Retain native data” is checked, which ensures the safety of data on the tablet.