What to do if iPad freezes

Table of Contents

iPad freezes and does not respond to any actions, how to get iPad out of freeze

What to do if the iPad is frozen and does not respond to any actions, how to restart the tablet and get it out of the freeze. The problem of hard freezing is faced not only by iPad users, but also by owners of other devices.

Many people want to know why the iPad freezes. There can be many possible reasons for the freezing of the iPad, for example, lack of RAM due to the fact that many applications are open on the device at the same time. There may also be errors in the operation of the operating system due to the constant operation of the tablet without rebooting. Like a computer, the iPad is a high-tech device that runs a huge number of programs and applications. Timely restarting iPad helps restore normal operation of the device, closes unused programs and applications, freeing up RAM and eliminating errors in the system. Apple has developed several reboot methods for its devices, which we have indicated below.

The first way is how to get iPad out of freeze. Press and hold on the iPad the “Power” button (this is the on / off button) of the tablet. Hold down the “Power” button for about 4.5 seconds or a little longer after which you will see a button for swipe on the screen. Usually there is a large one with the inscription “Turn off”, turn off by swiping the button and the tablet should turn off. To turn it on, press the “Power” button (on / off button). If this option does not allow you to restart a frozen iPad, then see below the second method on how to restart a frozen iPad.

Attention. Everything that you do with your tablet or other device, you do voluntarily at your own peril and risk! Good luck.

The second method, a reboot, is done if the iPad is frozen and does not respond to any actions and the first soft restart method does not work. Simultaneously press and hold the following two buttons on the tablet. the “Home” button (home button in the center at the bottom) and the “Power” button (the on / off button is usually on the top end). We hold down both buttons for about 7 or 10 seconds, after which the iPad screen will go out, if after that the iPhone does not turn on automatically, then press the “Power” button. If it doesn’t work, then try holding the buttons down longer.

How does a malfunction manifest

If, in general, we analyze the complaints of different users regarding the tablet freezing, they can be reduced to the following situations:

  • there is no response to actions (pressing keys or touching the screen of the device);
  • there is no tablet reaction when switching to the Home screen;
  • long delay in sleep mode;
  • I cannot turn off the device.

iPad frozen. what to do?

Almost every owner of a popular “apple” product has encountered several times with malfunctions in the operation of his device. The answer to the question of what to do if the iPad is frozen is usually searched for on the World Wide Web. In fact, the way out of the problem will be quite different: it all depends on what specific reason the iPad is frozen for. The most common cases will be discussed below.

Shutdown problem

When iPad is frozen and won’t turn off, the best thing to do is to restart your device. This action is performed in the following way: hold down the “Sleep / Wake” key until the red slider appears on the screen. When you slide your finger on the slider, the device turns off.

You can turn on the tablet in the same way, but before the company logo appears.

Reboot with an open application

Few know how to restart the iPad if it freezes when opening a certain program: first of all, you need to forcefully terminate the open application. This is done in the following way: you need to press and hold the “Sleep / Wake” position until the red turn off sign appears, then remove your finger from the key.

You can also try the following:

  • Press and hold the Home and Power keys simultaneously for about six seconds.
  • If the Home screen still does not appear, you will need to restart your tablet.
  • If the user has encountered a hang when using this application more than once, it is better to uninstall the program, and then reinstall it from the “Purchased” section of the App Store.
  • If the program stores important information, you must create a backup copy of it before deleting it.

The problem at the boot stage of the OS

If the iPad freezes on an apple, then the main causes of the problem are most often interruptions in the OS update process, illiterate installation of applications, or moisture getting inside the tablet. The troubleshooting steps will be the same as described above.

Update problem

If iPad freezes while updating, you need to get rid of the current software version and try to install the previous one. To do this, you need a cable and a computer with iTunes already loaded on it.

    Connect your tablet to your computer with a cable.

Launch iTunes on the user’s computer.

  • Hold down the keys “Home” and “Power on”.
  • Wait for iPad to turn on, turn off and back on.
  • At the moment of restarting, move your finger from “Turn on”, but at the same time hold down “Home”.
  • Select the required program to download in the App Store.
  • Move your finger from the Home key after connecting to the program.
  • Wait until the installation of the required software is completed.
  • At the end, when the application asks you to choose update or restore, select the second option.
  • As you can see, the answer to the question of how to turn off the iPad if it freezes is in most cases quite simple and does not require special skills.

    iPad freezes. What to do?

    I only had this problem once. the iPad froze and I didn’t know what to do. Therefore, I am writing detailed instructions on what to do if the iPad freezes.

    So, your iPad is not responding to key presses and touch screen taps, or iPad does not go to the home screen or wakes up from sleep mode, does not turn off. These and many more similar problems are related to freezing problems.

    iPad Freezes. What To Do? Instructions

    Problem 1. If one program stops responding or freezes, try closing it forcibly by following these steps.

    Press and hold the Sleep / Wake button until the red slider appears. When it appears, release the Sleep / Wake button. 2. Don’t try to drag the red slider, instead press and hold the Home button for six seconds. 3. If the device does not go to the Home screen, please refer to the reboot procedure below.

    Problem 2: If iPad is unresponsive, or if certain controls are not working as expected, try restarting your device by following these steps.

    To turn off the device, press and hold the Sleep / Wake button until a red slider appears. 2. Slide your finger across this slider to turn off iPad. 3. To turn on iPad, press and hold the Sleep / Wake button until the Apple logo appears.

    Problem 3. If iPad is unresponsive, but there is an image on the screen, try resetting the device. 1. Press and hold the Sleep / Wake and Home buttons at the same time for at least ten seconds.

    Problem 4: If the iPad is still blank, make sure the battery is sufficiently charged to turn on the device. 1. Connect iPad to the 10W USB Power Adapter using the dock to USB cable. 2. Charge iPad for at least 10 minutes, then try starting it. 3. If a red battery icon is displayed on the screen, continue charging the device until it can start up normally.

    If the above steps did not solve the problem (the screen is still missing or the Apple logo is constantly displayed), try restoring it using iTunes. 1. Connect iPad to your computer and open iTunes. 2. If your iPad appears in iTunes, select it and click Recover in the Summary pane. 3. If the iPad does not appear in iTunes, try to force iPad into recovery mode.

    Now you know what to do if your iPad freezes.

    iPad freezes. What to do ?: 497 Комментарии и мнения владельцев

    What happens to the content if the ipad is reset by pressing the “sleep” and “home” buttons at the same time?

    Reboot to “revive

    So, your iPad is frozen. What to do? The first solution to the problem is to reboot the device. A simple restart of the iPad is usually sufficient to fix this problem. This is a good way to clear the gadget’s memory, which is used for active applications, as well as close programs that are causing problems. In this case, all downloaded information is saved in full. To restart iPad, hold down the Sleep / Wake button at the top of the device and the round Home button at the bottom at the same time. After a few seconds, the tablet will automatically turn off, and then the Apple logo will appear on the screen and a new download.

    If the iPad freezes inappropriately, what to do?

    One of the most annoying problems that can happen with an iPad is freezing at the most inopportune moment. It is especially annoying when it happens all the time. Fortunately, this is often easy to fix. One of the reasons the iPad freezes is when multiple applications that are incompatible with each other are downloading at the same time. In addition, this problem often occurs due to corruption of the device memory.

    Read more:  How to activate iPad via iTunes

    The iPad is frozen. What to do if restarting doesn’t help?

    Another way to get the device working. uninstall the incompatible or problematic application that is causing the problem. If you’ve restarted your iPad and it still keeps freezing, it’s best to reinstall some programs.

    Delete the application by pressing your finger on its icon and holding it until a cross appears in the upper right corner. After clicking on this button (X) it will be uninstalled. This method helps if iPad is frozen when turned on for the first time.

    After that, you can easily install the program again by downloading it again from the AppStore. Your account has a tab called “purchased” which contains all of your previously downloaded applications.

    However, please note that all data saved in the program will be deleted. If you really need the information stored in it, do not forget to back up.

    The iPad is frozen. What to do if nothing worked?

    If you are still having problems with the device constantly freezing, it is best to restore the iPad to factory settings, and then load your applications from the backup, syncing the gadget with iTunes. This will lead to the fact that all information will be completely deleted from the tablet, and you will have to start using it from scratch.

    You can restore a device to its factory defaults by going to iTunes and choosing iPad from the list of devices, and then clicking on the “Restore” button. The system will prompt you to make a backup copy of the contents of your device, and you must do this. Then follow the program prompts of the app and reset all settings.

    Reasons for the failure

    Most often, in such a situation, the tablet completely ceases to respond to touching the screen with fingers and pressing buttons.

    In addition, there may be a long delay when the iPad wakes up from sleep mode, or the device may not turn on at all. The way to solve the problem in this case directly depends on the cause and nature of the malfunction.

    Often, the tablet may freeze at the moment when we open this or that application. In such a situation, it will need to be forcibly closed.

    Hold down the power button (usually located at the top right or side) until a red slider appears. Now press and hold the “Home” key for 6 seconds.

    If the home screen is still not displayed, you will need to go to a hard reboot (described below).

    And by the way, if a similar situation occurs with a specific program all the time, it is advisable to reinstall it, or even look for a new application in the App Store, made not so “crooked”.

    IPad freezes: why it happened and what to do

    Like any electronic gadget, the “apple” tablet is prone to periodic crashes and malfunctions. If the iPad is frozen, we do not always know what to do.

    Fortunately, in most cases, the problem is easy to fix, and as quickly as possible. First, it is worth deciding what exactly the failure is.

    Some practical tips

    • If the tablet does not respond at all to our touches, it is worth trying to restart it.
    • Turn it off by holding down the power button.
    • We turn on the gadget in the same way, before the logo appears. This is a standard procedure known as a normal device reboot.
    • Suppose there is a picture on the screen.

    We simultaneously hold down the power button (“Power”) and “Home” for at least 10 seconds. In most cases, such a hard reboot helps.

  • If there is no image on the tablet screen at all, it is worth checking if the gadget is charged.
  • In the event that everything is in order with the battery charge, it is possible that a failure occurred at the time of the system update, a software failure, and so on.
  • The radical ways to solve such problems include rolling back user settings, updating the firmware using iTunes and contacting the service center.

    Note that in many cases, problems arise precisely when updating the system. In such a situation, you can try to do the following.

    • We connect the iPad to the computer and open the iTunes application.
    • We hold down the power button and “Home”.
    • After re-enabling the gadget, remove your finger from “Power”, continuing to hold down “Home”.
    • As soon as the connection is made, release the button and wait for the installation of the necessary software.
    • Choosing recovery.

    Check the cable and charging adapter

    First of all, you need to make sure that the iPad has stopped turning on, not due to a low battery. Many will be surprised, but often the problem is really that the iPad is completely discharged, but does not charge due to a broken cable or charger.

    Making sure the problem isn’t with the accessories is pretty easy. Try charging another device, such as an iPhone, using the cable and charging adapter. If charging starts, then the accessories are not damaged and you can proceed to the following methods.

    Hang on update

    If the iPad freezes during the update, then there is no reason to panic. your device is very far from the “brick” state. You just need to try turning off your tablet, putting it into recovery mode, and connecting it to your computer to update the software again. If you tried to reflash the device with some kind of “left” firmware, give up further attempts and install the official firmware. this way you will get rid of problems with the tablet and restore its functionality.

    Sometimes the installation of updates ends in fatal failures, which cannot be eliminated at home. In this case, you should take the iPad to the nearest service center, where experienced specialists will take care of its restoration.

    Sometimes iPads freeze at the Apple logo on startup or restart. Most often this happens due to an unsuccessful software update, but sometimes there may be other reasons for this.

    We’ll tell you what to do if your iPad, iPad Pro, iPad Air, or iPad mini is stuck on an apple. How to restart iPad if it freezes and other ways.

    Hard reset iPad

    Let’s start with the simplest way to bring the iPad back to life, which is often a lifesaver. It’s not uncommon for iPad to not turn on due to a software error that needs to be reset. It is very easy to do this. you need to perform a so-called “hard” reboot.

    To do this, on the iPad, you need to simultaneously hold down the Home and Power buttons and hold them until the Apple logo appears on the tablet screen (10-15 seconds).

    If the Apple logo appears. iPad is saved! The tablet will turn on and work as before. If the “hard” reboot did not lead to anything, then you should proceed to the following methods.

    Check if there is a progress bar on the screen

    If there is a progress bar under the apple, your device is either installing a system update or repairing itself. In this case, do nothing and wait for the process to complete.

    Connect the tablet to a power source and do not touch it until the process is complete.

    If this is a software update, your iPad will automatically reboot after installation. You may have iOS auto-update enabled and your tablet decided to download the update now. Do not interrupt its download.

    If there is no progress indicator, then the tablet is really frozen. Follow the steps below to fix it.

    Removing a pending task

    iPad Freezes And Won’t Turn Off. What To Do With A Rebellious Device? If we were talking about a regular computer with the Windows operating system, then we would have called the task manager and removed the hanging task from execution. In the case of the iPad, we do not have a convenient task manager, so they can be removed in a different way:

    ipad, freezes
    • We hold down the power button and hold it for 10 seconds;
    • We are waiting for the appearance of the red stripe;
    • Press and hold the Home button for a few seconds.

    The result of this simple procedure for closing a hung application. the desktop will appear on the screen.

    If you notice that freezes occur only in certain applications, try reinstalling them again or search for software similar in functionality.

    Reset and restore iPad via DFU mode

    If the method above did not help you, you can use the DFU mode for recovery. This will erase all your data from the tablet, but then you can restore it from the copy.

    • Recover iPad, iPad Air, iPad mini, Old iPad Pro
    • Connect iPad to Computer and Launch iTunes.
    • Simultaneously hold down the power button and the Home button and hold them for about 10 seconds.
    • After 10 seconds, release the power button, but continue to hold the Home button for another 5 seconds.
    • On the computer screen, select Restore iPad.
    • Recovery iPadPro (2018 and newer)
    • Connect iPad Pro to Computer and Launch iTunes.
    • Press and release the Volume Up button, then the Volume Down button, and then hold the Power button for 10 seconds.
    • Continuing to hold the power button, hold down the Volume Down button for another 5 seconds.
    • Release the power button, but continue to hold the Volume Down button for another 10 seconds.
    • Select Recovery on the computer screen.

    When the tablet is restored, you can set it up as new or restore from a backup.

    Fortunately, the problem with hanging on an apple does not occur very often, but now you know how to solve it. Most often, one of the methods above solves the problem.

    Don’t miss the Apple news. subscribe to our Telegram channel, as well as to the YouTube channel.

    iPad is recognized as the best and most reliable tablet. Even older iPads perform well after years of heavy use. However, iPad may experience crashes, for example, the tablet may stop turning on. What to do if iPad won’t turn on? In this manual, we talked about the most efficient and effective ways to solve the problem.

    iPad won’t turn on? All the most effective ways to solve this problem are described below. We recommend that you follow one by one from the first to the last. at one of the stages, your iPad will work again!

    IPad freezes and does not turn on what to do

    Electronic devices often fail, causing some inconvenience to their owners. The problem is related to errors in software and malfunctions of electronic modules. As a result, smart electronics hang, losing functionality. IPad freezes. what to do? This is not the most serious problem, and there are many tools available to solve it. How to bring a suddenly dangling device back to life?

    Force termination of a process

    If the iPad freezes when launching the application, does not respond to touches, the program itself does not turn off, then you should not take radical steps like restarting the device. First, try to force quit the hung process:

    • Double click on the Home button to bring up a list of running applications.
    • Swipe up the program that is frozen.
    Read more:  Error 4013 When Restoring Ipad

    If the application does not swipe away because the screen does not respond to swipes and taps, then use another way to force the program to close. What do we have to do:

    • Hold down the power button and hold until the “Turn off” window appears.
    • Release the power button and hold down the Home key for 5 seconds.

    If these steps do not help bring the iPad to life, then you will have to use other methods. in particular, restart.

    IPad freezes what to do: return to work

    “If iPad freezes, what should I do to make it work again?”. such a question arises from the owners of Apple tablets, who suddenly realize that they are also not immune from the unstable operation of the device. In all fairness, this kind of problem is very rare for the iPad. However, it may still freeze when launching the application, updating or enabling.

    iPhone turns on and off immediately: how to restore a smartphone

    Re-flashing the device

    If the iPad is frozen on an apple, won’t turn off or turn on, then even a hard restart won’t fix the problem. In this case, you need to restore the device through iTunes. But before proceeding with the recovery, make sure that you have a backup copy of your data, as during the operation, all information from the iPad will be erased.

    Once the backup is ready, you can start restoring your device. First, try running it in Recovery Mode:

    iTunes will independently find and start downloading the required firmware version. You can speed up the recovery process if you first download the firmware to your computer. To select it, click on the “Restore” button, after holding down the Shift key.

    recover iPad user data via iTunes

    If recovery fails in Recovery Mode, put your tablet in DFU mode.

    • Connect iPad to computer running iTunes.
    • Hold down the Power and Home keys for 10 seconds.
    • Release the power key and hold Home until the following message appears in iTunes: The recovery process in DFU is the same as in Recovery Mode: you need to click “Restore” and wait for the latest version of iOS to download and install.

    Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

    Disconnecting iPhone during a call: finding and fixing the cause

    Standard reboot of the tablet

    If you just need to reboot your apple tablet, for example, if it starts to slow down, then for this it is enough to hold down the power off button until the slider with the inscription “Turn off” appears on the monitor. All that remains is to make one swipe of your finger and the device will turn off.

    It is worth noting that it is necessary to turn off the iPad regularly so that it does not freeze at the most inopportune time and function normally. The fact is that during such a procedure, the RAM of the gadget is cleared, which can become clogged during the operation of the device.

    How to restart iPad if it is frozen

    If you experience any problems, the iPad is often sufficient to simply reboot. But when freezing, it may not respond to normal restart, touches and other key presses.

    A forced reboot will help, which is quite simple:

    • hold down and hold the “Power on” and “Home” buttons to turn off the frozen device;
    • we are waiting for the new launch and the appearance of the start screen saver.

    If the problem persists, repeat this procedure, then contact the repair shop.

    Note! The reboot time for each specific case can range from 2 to 30 seconds. After that, the device will be ready for use again and the information on it will be completely saved. This process is the same for iPad 2 and other Apple devices.

    We should also mention the tablet freezing due to mechanical damage.

    The most common of them are:

    • moisture ingress on the device;
    • overheating or hypothermia;
    • dust penetration into its body;
    • bumps, tablet drop.

    If after that there are problems with the operation of the iPad, then you should pay attention to several points:

    • if moisture gets on the device, it must be removed immediately using a soft cloth, sponge or dry napkins;

    Important! A hairdryer is also suitable for this, but it is very important not to use heating modes. this can lead to overheating and subsequent damage to the device. You can remove moisture from it only with cold air and very carefully.

    Local network and Internet access point. Review in the article, setting up a local network via a WI-FI router

    Mikrotik. quick configuration of the RB951G-2HnD access point. details here.

    Step-by-step configuration of the D-LINK DIR 620 router for Beeline. Read more.

    • try not to leave the iPad in the sun for a long time and only carry it in a bag, protecting it from the elements;
    • timely clean the tablet from dust, on your own or by contacting a service center;
    • after a fall, if errors continue to appear again and again, we recommend that you seek professional help.

    Attention! It is recommended to disassemble the tablet on your own only if you already have similar experience.

    So, we have considered all the most common reasons that can lead to a freeze tablet. In many of the above cases, the problem that has arisen can be easily solved at home, but when the failure is not software, but hardware in nature, the best solution would be to contact a specialist.

    Previous: Hard Drive Heats Up

    Next: Windows 7 Blue Screen

    What is the difference between “soft” and “hard” reboots?

    Both types of reboot are designed to turn off the phone and then turn it on automatically. As such, there is no difference between them, the only thing that distinguishes them is the way of activation. It is also worth noting some important nuances:

    • “Soft” reboot is mainly used in cases of minor jams in the smartphone. This method helps to close all background applications and stop their excessive resource consumption. Generally speaking. a great way to free up the RAM of the device.
    • “Hard” is a forced restart of the iPhone X, which is different in that the device is completely turned off. This is how it is possible to eliminate the most serious malfunctions in work, when any attempts to interact with the device turn out to be a failure.

    Depending on the severity of the situation, one or another method of “restarting” the smartphone is chosen.

    “Hard” restart iPhone 8, X if the screen is frozen

    The unusual method of activating a function is at first difficult. But, it is only worth doing this operation a few times, as even such a time-consuming method becomes clear and accessible.

    • Quickly press and immediately release the volume up button
    • In the same way, press and release the volume down button
    • Press and hold the button on the opposite side of the device until the Apple logo appears on the screen
    • Enter a password if required

    In such a slightly convoluted method, a complete reboot of the iPhone X and the latest Apple devices is carried out.

    “Soft” restart iPhone X, 8, 7, 6, SE, iPad

    On all iPad models, the power button is located on top of the case. Starting with the “sixth” iPhone in smartphones, it has moved from the top to the side. Therefore, depending on the model of your device, you need to grip the power button located either on the top or on the side. In general, the method of “soft” phone reboot is carried out in the following way:

    • Hold down “power” for a few seconds and wait for the slider to appear on the screen
    • Swipe left on the “Slide to Power Off” slide
    • After turning off the smartphone, press the “power” again to turn it on again.
    • Enter a password if required

    You will be able to do these actions if the touchscreen of the device responds to user actions. If it doesn’t, then resort to the forced hard restart described above.

    Reboot iPhone 7, Plus with two buttons

    The 7 was in fact the first device in Apple’s product line to doomed the tactile Home button, which has become more of an operating system than a structural component of a smartphone. The innovation led to minor problems, namely the fact that in the event of a software failure of the OS, it also refused to work correctly, preventing the activation of a “hard” reboot. For such cases, the engineers of the Cupertin Corporation developed the following algorithm of actions:

    • On the right side of the phone, hold down the power off button
    • Press the volume down button on the left side at the same time
    • Wait for the apple logo to appear
    • Enter a password if prompted by the system

    We are smoothly moving from complex to simple. Now let’s look at the instructions for restarting the “sixth” iPhone and earlier versions.

    What to do if iPhone 6, 6S, SE, 5S, 5, 4S, 4 freezes

    A forced reboot of these iPhone models will not cause difficulties, perhaps, even for the most novice users and owners of “apple” products. If the picture on the display of your smartphone is frozen, the touchscreen has ceased to function fully, it’s time to “force” the device to “unload” its RAM.

    • Hold the Home and Power buttons at the same time
    • Hold until the Apple logo appears on the screen
    • Release the two buttons and wait for the iPhone to turn on again
    • If required by the system. enter your password

    By doing these simple steps, you can easily solve most of the software problems that, albeit rarely, but arise when using the “six” and early versions of the line of Apple smartphones.

    Why do a factory reset on iPhone

    Hard reset often helps with the following problems:

    3 Methods to Fix a Frozen iPad #2

    • iPhone won’t turn on;
    • spontaneously reboots;
    • iPhone is frozen. The screen is white (red). There is no information on it.

    Option

    Currently, there are a couple of main ways to reboot the tablet if it freezes, namely:

    • standard reboot;
    • hard way.

    In general, the simplest restart method is used when it is necessary to restart Android devices:

    • pressing the power key and holding it until the gadget is completely turned off;
    • turning on the tablet with the same button.

    If the tablet slows down, then it is worth resetting the factory settings, not forgetting that all information will be deleted in this case and therefore it is advisable to make a backup in advance.

    Check if there is a progress bar on the screen

    If there is a progress bar under the apple, your device is either installing a system update or repairing itself. In this case, do nothing and wait for the process to complete.

    Connect the tablet to a power source and do not touch it until the process is complete.

    If this is a software update, your iPad will automatically reboot after installation. You may have iOS auto-update enabled and your tablet decided to download the update now. Do not interrupt its download.

    Read more:  How To Install Apps On Ipad 1

    If there is no progress indicator, then the tablet is really frozen. Follow the steps below to fix it.

    Refresh iPad via Recovery Mode

    The next way to solve the problem is by updating through the recovery mode. To do this, you need a Mac or Windows PC with up-to-date iTunes and a USB cable. The method also depends on the model.

    • Recovery Mode on iPadPro withFaceID
    • Open iTunes on your computer.
    • On your tablet, hold down the Power button and the Volume Up button until the shutdown screen appears. Use the slider to disable iPad Pro.
    • Now hold down the power button on your iPad Pro and connect it to your computer using a USB cable. Keep holding the button until recovery mode is activated.
    • Select “Refresh” on the computer screen when the recovery mode notification appears.

    The update may take 20 minutes or more. If everything works out, the iPad Pro will update the system and reboot.

    You can also try resetting your tablet and then restoring your data from a backup.

    • Recovery mode on any iPad with Home button
    • Open iTunes on your computer.
    • Hold down the power button and then turn off the tablet.
    • Hold the Home button and connect your iPad to your computer.
    • Keep holding the button until recovery mode is activated.
    • Select “Refresh” on the notification on the computer.

    Again, you can try resetting your tablet and then restoring your data from a backup if the update doesn’t help.

    What to do if iPad stuck on an apple (Apple logo) and won’t turn on?

    Sometimes iPads freeze at the Apple logo on startup or restart. Most often this happens due to an unsuccessful software update, but sometimes there may be other reasons for this.

    We’ll tell you what to do if your iPad, iPad Pro, iPad Air, or iPad mini is stuck on an apple. How to restart iPad if it freezes and other ways.

    Force restart iPad

    Sometimes force restarting iPad can help. The method depends on the iPad model and year of manufacture. Below we will tell you about all the options.

    • Hard reset iPadPro11 ″ and iPadPro9 ″ (2018 and newer)

    Press and release the Volume Up button, then the Volume Down button, and then hold down the Power button until iPad Pro restarts.

    • Hard Restart iPad, iPad Air, iPadmini, and older iPad Pros

    Press the Home button and the Power button at the same time until the screen turns off and then the Apple logo appears on it.

    In some cases, a forced reboot will fix the problem and you will get your tablet in a normal state. If not, go to the next step.

    Reset and restore iPad via DFU mode

    If the method above did not help you, you can use the DFU mode for recovery. This will erase all your data from the tablet, but then you can restore it from the copy.

    • Recover iPad, iPad Air, iPad mini, Old iPad Pro
    • Connect iPad to Computer and Launch iTunes.
    • Simultaneously hold down the power button and the Home button and hold them for about 10 seconds.
    • After 10 seconds, release the power button, but continue to hold the Home button for another 5 seconds.
    • On the computer screen, select Restore iPad.
    • Recovery iPadPro (2018 and newer)
    • Connect iPad Pro to Computer and Launch iTunes.
    • Press and release the Volume Up button, then the Volume Down button, and then hold the Power button for 10 seconds.
    • Continuing to hold the power button, hold down the Volume Down button for another 5 seconds.
    • Release the power button, but continue to hold the Volume Down button for another 10 seconds.
    • Select Recovery on the computer screen.

    When the tablet is restored, you can set it up as new or restore from a backup.

    Fortunately, the problem with hanging on an apple does not occur very often, but now you know how to solve it. Most often, one of the methods above solves the problem.

    White screen

    It also happens that the tablet is interrupted by the appearance of a white screen. The reasons for this phenomenon can be hidden in both software and hardware failures.

    To get rid of this problem will help:

    • Shutting down iPad by holding the Home and Sleep buttons for about 10 seconds;
    • the so-called “hard reset”. pressing the “Home” button on the front of the device and the “Power” button on the top.

    Important! You must hold down the buttons until the tablet completely reboots, until the screen saver with an apple appears on the screen. Device data is not deleted during a forced restart.

    When updating

    If the iPad freezes during the update process, then to restore its functionality, you will need to uninstall the current software version and return the one that was installed before it.

    For this we need:

    • use a cable to connect the tablet to a computer with the latest version of iTunes installed;
    • launch the application;
    • simultaneously hold the buttons “Home” and “Power on”;
    • the device will turn on and then restart again;
    • wait for the reboot and remove your finger from the power button while holding “Home”;
    ipad, freezes

    Important! Be careful not to disconnect cables or power to the tablet during the update process. Even if the process ends successfully, the device may not have the files necessary for it to work correctly. In the future, this can lead to serious problems and the need to reinstall the OS.

    When factory reset

    The hang is most often caused by internal tablet errors. What if one of them appeared right during the update or firmware of the device? The tablet is frozen and does not respond?

    There may be several problems in this case:

    • software error;
    • problem with the firmware file;
    • failure of the update process.

    Faced with one of them, you should understand that they are serious enough and in the future can lead to errors in the operation of the device. The solution can be flashing and re-updating.

    Attention! To avoid such problems, it is recommended to use a known working firmware file and not interrupt the tablet update process.

    Freezing can occur due to many factors and its “treatment” will also depend on the individual case. Next, we will consider the most common of them and offer options for getting rid of this annoying failure.

    When turned on on an apple

    Another common mistake is when the device hangs on an apple. the startup screen saver.

    The most likely reasons for this behavior iPad can be considered:

    • failure during update;
    • incorrect installation of one or more applications;

    In this case, it is recommended:

    • redo the update;
    • remove the applications causing the conflict;
    • reinstall the OS using a proven firmware;
    • remove contaminants or take the device for repair.

    Freezes reasons and solutions

    Each of the cases when the device freezes is different.

    In general, several categories of problems can be distinguished:

    • lack of response to key presses or interaction with the sensor;
    • inability to get to the “Home” screen;
    • ipad freezes and does not turn off in sleep mode;
    • the gadget does not respond to attempts to disable it;
    • freezing when updating or resetting settings;
    • the appearance of a white screen.

    For these failures, the ways to get rid of them will also be different. Below we will tell you more about this.

    What to do if iPad freezes?

    Almost every second inhabitant of the planet knows about the existence of the legendary “apple” tablet iPad. The iPad is the standard of tablet building, improved from generation to generation by Cupertino developers and is one of the best tablets on the market in recent years. Undoubtedly, competitors in the face of Samsung, Asus, Lenovo and other companies are not asleep, but so far they have not managed to create something more perfect and high-quality than the Apple iPad. And quality, as you know, plays a huge role for the user. True, regardless of the manufacturer, the technique has one unpleasant property. “freeze” at the most inopportune moment. At the same time, the tablet does not respond to touches of the touch screen and does not respond to pressing soft keys. Alas, the problem of “device freezing” has not spared the “apple” devices either. What to do if iPad freezes?

    Most often, active tablet users face this problem. After all, software failures occur when the device’s processor does not have time to process the tasks assigned to it. Hangs tend to manifest themselves in games and when working with resource-intensive applications. Depending on what caused the crash, there are several ways to fix the freeze problem.

    If the iPad is frozen on any program and does not respond to touching the display, then hold down the power (on / off) button and hold it until the “Turn off” message appears. Release the power key and hold down the Home button located under the screen. After 5 seconds, the application will close and you will be able to access the desktop.

    iPad freezes and refuses to turn on after reboot? You probably forgot to charge your tablet in time. Plug the charger into your iPad and leave it to “recharge”. After a couple of hours, try turning on the tablet again.

    In the case when the Apple iPad does not even respond to the Home button, you will need to restart the frozen tablet with a simple keyboard shortcut: simultaneously hold down “Home” and the power button of the device for 10 seconds until the device turns off and automatically reboots.

    serious is the problem when the iPad is frozen on the apple. In such cases, one keyboard shortcut will not solve the software failure. Connect your iPad to your computer and launch iTunes. Wait for “iTunes” to find your tablet, and then click the “Restore” button.

    Sometimes problems can arise in the work of the official Apple program. If iTunes does not see your tablet, then first make sure that the cable is intact and that the USB port is working. Then update iTunes to the latest version and try to restore iPad again.

    Has the tablet freezing problem become permanent? It’s time to think about cleaning the device from extraneous trash in the form of a huge number of games and applications. Remember that at least 512 megabytes of memory must remain in your tablet to work properly. And keep in mind that you are not holding a full-fledged computer, but just a tablet from the world’s largest IT company.

    iPad Screen Is Frozen Or Stops Responding, Fix Touchscreen That Keeps Freezing on iPhone or iPad

    Don’t be “friends” with your computer and are afraid to send your iPad to the next world? In this case, it is better to entrust it to professionals. your friends who are familiar with the IT sphere firsthand, or specialists from service centers. On top of that, we recommend watching a video on how to unlock your iPad in easily accessible ways: