WAP Mikrotik reset to factory. Mikrotik reset by closing contacts on the board

Mikrotik settings reset: reset the password in a general way

Hi! Another article will not be in places not easy for such a basic operation. Let’s talk about resetting to the factory settings of Mikrotik routers. Why so much noise from the threshold? Please read at least the first section for general education. Practic lovers immediately look for your model.

If you have a question or addition, write in the Комментарии и мнения владельцев. In addition, Mikrotik devices are rich in different ways of reset-if you have something especially, which is not in this article, I also ask you to write!

Introduction. you can skip

The idea of ​​such a large article is that Mikrotik routers, although they are released for a wide audience, but their functionality is slightly higher than the average. A simple layman may not understand some points. Here the integration is not for housewives, and the setting can be done through the program, and the discharge with a screwdriver. in short, such megays for admin on vacation.

Mikrotik reset here can also be performed in standard ways, but they are a little more complicated:

• Through the settings. it will not be so easy to find, but to enter and even more so. But we will try.
• Through the button. let’s see that the buttons here are also not standard.
• Through the closure. we do not apply this to other models at all, but here everything is possible.

About this plan and let’s go. So if you have already planned to drop it for sure, maybe something stopped working, forgot your password, they wanted to set it up again or just have fun-let’s already do it!

WAP Mikrotik reset to factory

Reset can be carried out in several ways:

• Disconnect the power of the router;
• Press and hold the Reset button;
• Turn on the power of the router;
• Wait for the ACT indicator blinking and release the Reset button.
• Disconnect the power of the router,
• Close the contact platform with a metal screwdriver and hold the closed,
• Turn on the power of the network device,
• Wait until the ACT LED indicator does not start blinking (a few seconds),
• Remove the contact platform to clean the configuration.
• Disconnect the power of the router;
• Close jumper with a metal jumper;
• Turn on the power of the router;
• Wait for the configuration to reset and remove the jumper.

To reset passwords and settings of the Routeros operating system installed on the X86 computer, it is necessary to load from the installation disk from Routeros. When a window with the choice of packages appears, press I and answer n to the question do you want to keep old configuration? Confirm the reset by pressing Y.

Select the Quick Set menu (this field is open by default). On the right in the System field click the “Reset Configuration” button.

Keep-Users: Do not delete users and their passwords; No-defaults: Do not upload the configuration by defending, to reset all the settings; Skip-Backup: Do not automatically backup configuration before reset; RUN-AFTER-RESET: Indicate the name of the Export file, which will be completed after resetting the settings.

To work the latest function in the router, a folder with the name “Flash” should be created, the Export file should be stored in this folder.

You can connect to the Mikrotik routers using various services (SSH, Telnet). With their help, you can also easily reset Mikrotik settings, just enter the System Reset-Configuration command and press Enter, when confirming confirmation of reset, press Y. In the same method, you can drop by connecting through the console by COM-Com, RJ-45-Com cable (depending on the model) and using, for example, Hyperterminal, to connect.

Netinstall is used to reinstall Routeros when it is damaged, incorrectly installed or unknown password for access. 1) Download Netinstall from the official website http: // www.Mikrotik.COM/Download; 2) Write a static IP address to the computer, for example 192.168.88.254; 3) Connect Ethernet with a cable router via ETH1 port with a computer using a switch or directly. 4) Launch the Netinstall application. Press the Net Booting button, put a box of Boot Server Enabled and enter the IP address from the same subnet where the computer is located, for example 192.168.88.200, his Netinstall will temporarily appoint a router. Any firewall/firewall on the computer should be disconnected. 5) When the power is turned off the RESET button, when you keep it on the power supply and continuing to keep it on, wait about half a minute until a new device appears in the NetinStall program in the list of devices. 6) In Packages, press the Browse button and specify the directory with the firmware. In the list of devices (Routers/Drives), select the router, in the bottom in the list, put a checkmark on the firmware that you need to download in the router and press the Install button. The firmware is customized to the router and the status will write Waiting for Reboot, after which the Reboot button will be instead of the Install button, and it is necessary to click it. The router will load with a new firmware. If there are any problems with the loading of the router, you can try to drop it on standard settings by holding the Reset button, or if there is a display, select the Restore Settings and enter the standard PIN-code 1234. Or restore through NetinStall with a shot “Keep Old Configuration” and indicating below your “configure script”.

As a conclusion, it is worth saying that after resetting the settings, if no-defaults tick was pressed, our router will load with this window:

Description of this script for each model can be found in wiki.Mikrotik. By pressing the Remove Configuration key, we will delete all the settings of this script, leaving a “naked” router. Show Script key shows directly the script itself, which was applied. OK key saves the changes made by this script.

It is also worth saying if the firmware of the router was installed via Netinstall and the script indicated as the initial configuration was assigned, the reset team performs this script after the settings cutter. To replace it, you will have to re.fill the firmware through NetinStall, not noting your initial configuration scenario.

PC360

You are here PC360 »Settings for» Mikrotik RB951UI-2HND and RB750GR3-Spit in factory settings.

The reasons for resetting the router to factory settings can be different and each has its own. Most often, the password is not suitable, in second place are many non.working settings in which it is difficult to understand and easier to configure everything from the beginning.

When the discharge is performed, the configuration of the settings returns to the form, as when the first turned on. Consider the procedure for the example of the example of the two most popular routers in our LVS: RB951UI-2HND and RB750GR3. Many other Mikrotik models have about the same discharge principle.

You can master the Mikrotik using the online quis “Mikrotik equipment Settings”. The course contains all the topics that are studied on the official MTCNA course. The author of the course is the official coach Mikrotik. It is suitable for those who have been working with microtics for a long time, and those who still haven’t held them in their hands. The course includes 162 video tutorials, 45 laboratory work, questions for self.testing and abstract.

Mikrotik RB750GR3. Reset with the Reset button.

Turn off the power, pulling the connector from the router or the power supply from the outlet.

Click the internal res (reset) discharge, as in the photo and serve power.

3.We continue to hold the button another 10 seg.

-USR will start blinking. let go of the presset button;

That’s all. The router is dropped to the factory configuration.

Mikrotik RB951UI-2HND-Reset with the Reset button.

The sequence of actions is exactly the same as in the previous router.

Disconnect the power by pulling the power connector from the router or the power supply from the outlet.

Click the internal RES button and serve power.

We continue to hold the button another 7-10 nets.

-когда ACT начнет мигать, отпускаем нажатие кнопки RES;

-An incomprehensible and single signal will sound;

The router is dropped to the factory configuration.

For Mikrotik RB951UI-2HND there is another way of hardware reset. On the bottom of the case there is a hole in which two contact sites are visible.

Close the contacts in the hole on the lower part of the case with a screwdriver and supply power.

3.We continue to hold the button another 7-10 nets.

-When the ACT starts to flash, we remove the screwdriver;

-An incomprehensible and single signal will sound;

The router is dropped to the factory configuration.

Mikrotik RB750GR3, RB951UI-2HND software reset.

If there is access to the Mikrotik settings, the configuration can be reset software. For both routers, reset is carried out the same.

We connect via Winbox, then System Reset Configuration.

You can drop the settings through the command line of the terminal.

Open New Terminal and copy the line into it:

The system will report that this is a dangerous effect. We confirm by pressing Y. The settings will be reset.

After resetting during the first connection, a report appears about the default configuration.

If you press the Remove Configuration button, then all of the above settings will be removed. When repeated connection without settings, you can only enter the router at the MAC address.

Connection to the router after reset to factory settings.

Mikrotik RB750GR3, RB951UI-2HND and many other connection principle of about the same.

We connect to Mikrotik via Winbox.

-select Mac or IP (if you press the MAC address, the “Connect to” field will be Mac, if you click on the IP address, IP will appear in the “Connect to” field);

If after reset Mikrotik does not connect, it does not display on the Neighbors tab insert LAN wire into 2-5 connectors.

If the default settings were removed, then the IP address will be 0.0.0.0 and can be connected only by MAC address.

You can master the Mikrotik using the online quis “Mikrotik equipment Settings”. The course contains all the topics that are studied on the official MTCNA course. The author of the course is the official coach Mikrotik. It is suitable for those who have been working with microtics for a long time, and those who still haven’t held them in their hands. The course includes 162 video tutorials, 45 laboratory work, questions for self.testing and abstract.

Mikrotik settings reset using a terminal connection.

You can connect to the Mikrotik routers using various services (SSH, Telnet). With their help, you can also easily reset Mikrotik settings, just enter the System Reset-Configuration command and press Enter, when confirming confirmation of reset, press Y.

Here’s an example of how this is done in the router terminal.

It is necessary to take into account that by resetting the settings you can no longer connect to the network device.

Conclusion.

Regardless of the method of resetting the settings when connecting to Mikrotik, you will see the next window.

By pressing the “Remove Configuration” button, you delete all the settings of the router (including factory), I do not recommend such total cleaning, often just drop it to factory settings, for this, click the “OK” button.

WAP Mikrotik reset to factory

Good day readers of my blog! Today we consider the topic of resetting the settings if the password from the router is lost. In the wireless routers of the SXT series, the reset button is located under the device cover. But this is not enough to know. If you are looking for a Mikrotik reset algorithm for factory settings, then you probably already realized that this is done not like in other routers for SOHO. I will not even upload screenshots through the router menu. If you have a Mikrotik password, then the default settings are the way to reset: System/Reset Cofiguration.

For those who do not want to spend their expensive time studying this manual, we offer our paid help.

In some routers, the reset button is drowned in the case:

In some, this is not a button at all, but two contact sites that need to be closed with a screwdriver:

How to reset Mikrotik router to factory settings?

To get started, while the Internet is still working better download the WinBox router control utility

She can immediately look at which IP of the current router and its indifier. When resetting, it will most likely change. It is convenient after each reset attempt to try to go to an admin login without a password.

How to reset Mikrotik settings

There are several ways to reset the settings in Mikrotik devices and they depend on the Routerboard model itself. So, reset the password itself and the Mikrotik Routerboard settings will help you with the Reset button or a special hole on the payment of your device.

How to reset Mikrotik settings using the Reset button

Most Routerboard devices have a Reset button.

In order to reset the Mikrotik configuration to the factory settings, you need to perform several actions:

• Disconnect the power of the router;
• Press and hold the Reset button;
• We turn on the power of the router;
• We wait for the ACT indicator to blink and release the clamped reset button.

After resetting the router, you can go into the settings under the usual name of the user, or rather Admin, and also without password.

It is important that if you do not release the Reset button in time and hold it until the time when the ACT indicator will no longer flash, then the router will go to the Netinstall mode, or rather the Routeros OS mode for reinstalling

Special opening for Mikrotik reset

Each modern Routerboard is equipped with a special opening for resetting settings. But the owners of a number of Mikrotik models will have to open the case to reset the settings. This is the only way to use a hole. But other models of the microtics devices have a special hole on the case, which will allow you to reach the discharge on the board.

And so, in order to reset the configuration of the microtics using a special hole on the board, you need to do the following:

• Disconnect the power of the router;
• Close a hole for resetting any ordinary metal screwdriver;
• turn on the power of the router;
• We are waiting for the configuration to reset and remove the screwdriver.

And again, after reset, it will be possible to go into the settings using the standard name of the Admin user and also without a password.

How on old models with the help of Jamper to reset Mikrotik

The drawing demonstrates the location of Jamper during the reset of settings in the old Routerboard model. As an example RB133C.

To reset the settings in the old Mikrotik model, you need these actions:

• Disconnect the power of the router;
• Cut the jumpper with a metal jumper;
• turn on the power of the router;
• We are waiting for the configuration reset and remove the jumper.

Resetting the router settings will allow you to go into the settings for the standard name of the Admin user and again without a password.

It is important not to forget to remove the jumper subsequently resetting the settings. Since the device will completely reset each time during the reboot.

How to reset Routeros, which is installed on x86

In order to reset the password and settings of OS Routeros, which are installed on computers X86, you need to load from the installation disk where the Routeros is located. At that moment, when a window with the choice of packages is displayed, press I and answer the letter N to the question that sounds like this “do you want to keep old configuration?””. Make confirmation of the reset by clicking on Y.

Hardware reset procedure

And now I will describe the hardware reset procedure itself, but with all the details. There is nothing special to do with software. they poked it on points, and everything will work. There are nuances here. So, we do by steps:

• Turn off the router. turn off from power.
• Press and hold the Reset button (or close the contacts).
• Serve power, turn on the router. We are convinced that the power indicator has caught fire.
• We are waiting for it to stop blinking. let the discharge button.
• We get a sound notification. the discharge has been made, hardware self.test has been completed.
• We are waiting further. To a double signal. completion of program testing.
• All! Default settings are returned, you can start the basic settings.

All models are slightly different from each other. And still come across without sound indication. So try to navigate the flashing of indicators!

The main indicator. ACT. on the front panel. When pressing it begins to blink. If you let go right away, then the settings will simply be dropped. If you wait, while it stops blinking, all Routeros will be reinstalled. Relevant for internal indicators.

Password reset and configuration button “Reset

Note: If you hold the Reset reset button pressed until the indicator stops flashing, and only then release the button, then instead of resetting the configuration, the NetinStall mode will be launched for reinforcing Routeros.

How to reset Mikrotik router to factory settings

In Mikrotik routers, resetting to factory settings can be performed in three methods:

• Program. To reset Mikrotik configuration in this way, you need to go to the device, for this you need to know the user’s login and password with full rights.
• Hardware. Used if you forgot the password and cannot go to the router. Physical access to equipment will be required.
• Software-hardware. It is performed using the proprietary utility Mikrotik Netintall. This method is used in the most emergency cases and is understood in detail in a separate article.

Resetting a microtics configuration using software tools

To do this, with the help of a Winbox or console graphic utility (Putty program), go the administrator’s account accounting for the router settings. And perform the actions described below.

Mikrotik reset via Winbox

We run Winbox, go: Quick Set = Reset Configuration = Yes.

• Keep User Configuration. If you want to save the previous accounting data for entering the router, then activate this parameter, otherwise the account of the default account will be used;
• Caps Mode. Search for Capsman server
• No Default Configuration. Activating this item, the settings will be discharged without saving the factory configuration. Mikrotik equipment will only be possible through the MAC device;
• Do not backup. by default before resetting Mikrotik settings, a backup copy of the configuration is created. If you mark this item with a box, then this function will not be applied.
• RUN AFTER Reset. start the script after reset. Usually this parameter is used to restore the configuration using RSC file. You can learn more about this from the article: Mikrotik: Configuration Export.

After clicking on the button, the current system parameters will be reset and the installation of the factory configuration “by default”.

Reset of microtics using a console

To discharge Mikrotik to factory settings from the command line, you need:

/System Reset-Configuration [Caps-Mode =] [Keep-Users =] [No-defaults =] [Run-After-RESET = Script_NAME] [SKIP-BACKUPUP =]. By default, the additional parameters of the team are assigned the value of “no”. If you want to discharge to a clean configuration without settings, then the value must be indicated obviously. How to do this is shown below:

Hardware reset procedure

And now I will describe the hardware reset procedure itself, but with all the details. There is nothing special to do with software. they poked it on points, and everything will work. There are nuances here. So, we do by steps:

• Turn off the router. turn off from power.
• Press and hold the Reset button (or close the contacts).
• Serve power, turn on the router. We are convinced that the power indicator has caught fire.
• We are waiting for it to stop blinking. let the discharge button.
• We get a sound notification. the discharge has been made, hardware self.test has been completed.
• We are waiting further. To a double signal. completion of program testing.
• All! Default settings are returned, you can start the basic settings.

All models are slightly different from each other. And still come across without sound indication. So try to navigate the flashing of indicators!

The main indicator. ACT. on the front panel. When pressing it begins to blink. If you let go right away, then the settings will simply be dropped. If you wait, while it stops blinking, all Routeros will be reinstalled. Relevant for internal indicators.

Connection after reset

There is nothing special here, we will connect the same.

Standard address after reset with the button. 192.168.88.one. If you connect via a web-intake: login-admin, standard password (Password Field)-without password.

After closing, the address is not issued and displayed in Winbox as 0.0.0.0. We calmly go to it through Winbox at the MAC address and set up.

That’s the whole science. If that. Комментарии и мнения владельцев are waiting for you below. Successful conquest of these miracles!