Viewsonic TV remote codes. How To Unlock a ViewSonic Projector Using Remote or Control Panel

Gadgets

Xfinity Remote Codes [Complete List Setup Guide]

Are you pairing the Xfinity remote to the TV but the codes listed on the setup page don’t work? Worry not. This article has a comprehensive collection of Xfinity remote codes that should work with all TVs out there.

If you aren’t privy to the remote codes, they are the standard numbers that need to be typed on the TV screen to complete the pairing process.

That out of the way, I shall divide Comcast remote codes into two tables. The first one lists code for all popular TV brands while the other is for all the TV manufacturers.

Popular TV Brands’ Remote Codes

Xfinity Remote Codes [Complete List]

Note: For your convenience, the codes are sorted in alphabetical order. You may also use the search box below to quickly navigate the remote codes for your TV.

viewsonic, remote, codes, unlock, projector, using

If your Xfinity remote won’t work or doesn’t accept any of the remote codes, restart your TV box and try again.

I generally write about cable modems and Wi-Fi routers, but one of my readers who bought an Xfinity-supported modem after reading my post needed help with remote codes that work with Comcast remotes.

To help him, I researched and created a complete list of remote codes for TVs from different brands.

What’s Next?

I shall cover the setup and programming techniques pertaining to every class of Xfinity remote, including the voice-enabled controllers like XR11, XR15, and XR16, with only the first remote controller having the setup button close to the bottom edge, whereas the X15 and X16 not having dedicated setup tabs on them.

I shall also talk about the non-voice remote controllers like XR5, XR2, or anything older and the best ways to pair them with the television set. Finally, I shall discuss the steps to program Xfinity remotes via the ‘My Account’ application.

Note: You can even pair an Xfinity remote to the TV via RF pairing, but I shall FOCUS on programming the device using the TV-specific codes.

How To Program Xfinity XR11 Remote?

Step 1: Turn on the television and also the TV Box that comes with the bundled Xfinity plan.

Step 2: Keep pressing the setup button for at least 5 seconds and wait till the red light atop the remote changes to green.

Step 3: Now press the Xfinity button first to connect the remote to the TV Box and then move forth to set up a manual connection with the TV.

Note: However, to connect to the TV Box, you will need a specific 3-digit code, which is visible on the screen and needs to be typed in using the remote controller.

Step 4: Press the Setup tab for three seconds till it changes color from red to green, as was the case when programming it for the TV box.

Step 5: Once the remote indicator turns green, press the concerned TV code for the given brand on the remote.

Step 6: If the LED flashes green after pressing the code, it means you have fed in the right set of numbers, and the XR11 is now paired with the TV.

How To Program Xfinity XR15 or XR16 Remote?

Step 1: Press the ‘i’ button on the remote and the Xfinity button simultaneously until the LED flashes red to green.

Step 2: Punch in the number visible on the screen as it would then connect the remote to the TV Box first.

Step 3: Once paired, you would be asked if you want to control the TV using the X15 or X16 remote. (For already paired devices)

Step 4: Press the button at the middle of the remote to select.

Step 5: If you are pairing the remote for the first time, press the Xfinity button and the mute button until the LED turns green.

Step 6: Once green, punch in the code for the particular TV, and the remote will be paired and programmed to be able to manage basic TV functions.

Programming Non-Voice Xfinity Remotes (XR2, XR5, or Older)

Note: Once you have paired the non-voice Xfinity remotes to the concerned TV boxes, programming them for the TV is a cakewalk and similar for all of the older non-voice units.

Step 1: Turn on the TV.

Step 2: Hard press the Setup button and wait for the LED to turn green.

Step 3: Once the LED is green, press the code for the given brand and if the code is right, wait for the LED to blink green, two times, consecutively. This means that the non-voice remote is paired to the TV and can be used to control volume, power, and other functions.

Programming Xfinity Remotes using the My Account Application

Step 1: Install the Xfinity My Account application from Play Store or App Store.

Step 2: Open the app, and click on the Television or the Manage TV icon.

viewsonic, remote, codes, unlock, projector, using

Step 3: Next up, select ‘Setup a Remote’ from the list of options.

Step 3: Now, choose the remote model and select continue.

Step 4: Pick TV as your preferred interface and follow the instructions that follow.

Conclusion

If you’ve opted for the Comcast Internet TV in X1 or the high-end Flex plan with internet and a 4K streaming box, you must have received an Xfinity Remote Control that can be programmed to work with the TV at your home.

But you can’t simply take it out and start using it immediately. Because different TVs have disparate settings, you need certain remote codes for your Xfinity remote.

Now that you know your way around the popular Xfinity remote controllers and the diverse array of Comcast remote codes for all the TV brands, you can program these for almost every television by simply keeping the codes handy.

This approach saves you the effort of purchasing a universal remote to manage the television, as any Xfinity TV Box remote can be converted into a fully functional TV control in a few simple steps.

About Kurt Twain

I’m a networking professional with 7 years of experience handling with Internet equipment. I’ve worked closely with various house owners and businesses to help them setup a seamless network at their places.

Reader Interactions

Комментарии и мнения владельцев

impossible de coupler ma télécommande a une TV I-COM DONT LE CODE RÉCUPÉRER PLUS TOT EST 11746. je n’en trouve pas d’autre.

  • Kurt Twain says December 11, 2022 at 10:55 pm

Hé riche VENNES, Je suis désolé pour la réponse tardive. Après vérification, je n’ai pas non plus trouvé de code de télécommande pour TV I-Com.

Footer

Approved Modems is a resource website dedicated to help people like you find the best-rated modems, wireless routers, mesh Wi-Fi systems. Started as a compatible modem list site, it has evolved into a networking hardware resource.

It is a participant in the Amazon Services LLC Associates Program, an affiliate program designed to provide a means for websites to earn fees by advertising and linking to Amazon.com.

How To Unlock a ViewSonic Projector Using Remote or Control Panel?

A projector has several features and functions. Each one is designed for the ease and convenience of the users. But if you are someone who has accidentally changed their projector’s setting and is now wondering hard how to unlock a Viewsonic projector using remote or control panel, then let us inform you have landed on the right web page.

In this article, we are going to share how to unlock a ViewSonic projector using a remote or control panel in simple and easy steps. So, read this article thoroughly and take notes.

How To Unlock a ViewSonic Projector Using Remote or Control Panel?

If all buttons on your projector are locked or your ViewSonic remote control is not working don’t worry, we have got a way out for you. Unlocking your projector’s remote is not a difficult task. It happens quite a lot of times with remote control projectors that the settings get messed up.

In this portion of the article, we are going to share some easy steps that are going to guide you on how to use the projector remote control. So kindly read all the steps carefully as we go through them one by one:

  • First, you will have to locate the keys on the remote control because depending on the model of the projector they might be slightly different.
  • Now once you have a glimpse at all the keys search for the key that has a lock sign on it.
  • Hold and press this button or key for a couple of minutes until you see a pop-up message on your projector’s screen.
  • The message on the screen will ask for confirmation to unlock the projector screen.
  • Select the ‘yes’ option and save the changes.
  • Now the projector remote will be unlocked and you can use the other keys to perform operations.

Before going deep into the article, we recommend you top 3 best Viewsonic projectors of 2022 which can help you with multi-purposes. Just click on them and order the best one.

How Do You Use a Remote Control Projector?

Projectors are fun and easy to use. They vary in size and features but they all can serve the purpose of entertaining you and your audiences. Most of the projectors come with remote control and some projector have remote control apps as well.

However, it’s your choice to use a remote or not. Many people prefer to use one just for their convivence.

So, in the part, we are going to show you have to use a remote-control projector or how to use a projector remote with PowerPoint:

  • First, you need to turn on your projector using the power button.
  • Next, grab that ViewSonic M1 remote and locate the navigating keys usually located at the center of the remote.
  • Press these keys or buttons the contents on the projector screen will get highlighted in blue color. This shows that the remote control is synced with the projector.
  • Now look for the menu key and surf through it to see if any settings need to be selected or change. But be very careful.
  • You can also see the pause and play buttons near the menu’s buttons. You can use these to control videos on the projector.
  • Similarly, there would be volume keys on the remote as well to change sound levels.
  • Use the keys you need to give commands or control operations on the screen.
  • In a very short time, you will get used to using a remote control with the projector.

Can You Control a ViewSonic Monitor With a Remote?

There are different remotes available in the market that can be used with your ViewSonic monitor. However, these remote controls have certain codes so to check if they are compatible you have to see the manual to match ViewSonic remote control code.

To learn how to unlock buttons on ViewSonic TV remote control let’s check out the guide mentioned below:

  • Make sure your ViewSonic monitor is plugged in and powered on before processing.
  • Then you need to program your universal remote for ViewSonic TV with the monitor.
  • To do this use the auto search method this option will find the right code and will link your ViewSonic remote and monitor.
  • Once you are done with programming both devices press the button on the universal projector remote.
  • Hold the button for a couple of seconds until you see the LED light blinking giving you a signal that it is synced with the monitor.
  • Now enter and save the code by clicking monitor in the device options from the settings or menu.
  • Once the code is saved turn off the monitor and now press the power button from the universal projector remote control.
  • If the monitor turns on the code was saved successfully and you can proceed with your operations.

How Do I Connect My ViewSonic Projector To My Phone?

While composing an answer to the question of how I connect my ViewSonic projector to my phone we can think of several ways how it can be possible.

In this portion, we are going to tell you how to connect the ViewSonic projector to the phone with the help of different methods:

Screen Mirroring

You can connect your phone with your ViewSonic projector with the help of screen mirroring through Google Chromecast. To access the ViewSonic m1 plus screen mirroring feature all you have to make sure is that your projector supports an HDMI connection.

Hook up the Chromecast device via the HDMI cable into the projector. Now from the phone settings go to the display settings and chose Chromecast as the option. Do the same on your projector. Now play anything on your phone it will be displayed on the projector’s screen.

Wireless Connection

You will need a Bluetooth connection or a Wi-Fi connection to connect your ViewSonic projector to your phone wirelessly. Make sure to turn on the Bluetooth option on both devices and pair them.

Another way is to use the ViewSonic projector remote app on Android. For this, you have to make sure to download the app and then connect both devices to the same Wi-Fi network for them to sync with each other.

HDMI or MHL Connection

To use this method all you need to have is an HDMI converter compatible with Android or an MHL cable. Hook the adapter or convertor with the Android’s external port and the other end with the projector’s HDMI port. Now play anything on your phone it will be mirrored on the projector screen.

How To Unlock a ViewSonic Projector Using Remote?

A lot of times while going through some normal operations on your projector you might accidentally end up locking it. While unlocking a projector is not a difficult task being unaware of ViewSonic remote control setting 1 can put you in trouble.

  • Locate the button or key having a lock sign on your ViewSonic projector first.
  • Once you know where it presses the key for a couple of seconds.
  • After a few seconds, a message will appear on the screen informing you that the panel keys are unlocked.
  • Now after this confirmation you can operate your projector with the help of your remote control.

How To Unlock a ViewSonic Projector Using Control Panel?

If your ViewSonic remote control is not working or you don’t have access to a universal projector remote. Then don’t worry there is another way out. Your ViewSonic projector might have a control panel located on one of the sides of the body of the projector.

  • To unlock a ViewSonic projector using the control panel locate and press the menu buttons.
  • Now go to the ‘System’ settings and choose the option ‘panel key lock‘.
  • Using the arrow keys navigate throw the options and select the unlock feature.
  • Now press ‘Yes’ to confirm and save the changes.
  • You will be done and ready to use the projector.
viewsonic, remote, codes, unlock, projector, using

Concluding Remarks

ViewSonic is one dynamic company that manufactures one of the best modern projectors and mini projectors available on the market. Their projectors have dynamic and up-to-date features that equip you with a lot of different choices.

It’s common to unlock your projector accidentally while you are in a hurry or press any wrong button. However, you should not panic too much.

In this article, we have shared different ways to guide you on how to unlock a ViewSonic projector using a remote or control panel. We hope this article was of some help. Thanks for reading!

Frequently Asked Questions (FAQs)

How do you use the ViewSonic remote?

To use the ViewSonic projector with a remote you have got two options. First, you can use get yourself an all-in-one projector remote. And second, you can use ViewSonic remote control app. Using the projector remote is the same as using the TV remote. But for the app, you first have to download it and then connect it to the projector via the Wi-Fi feature.

How do I reset my projector remote?

In case your projector remote is not working properly, you have tried changing the batteries but figured out it needs to be rested. Then all you have to do is press the ‘Home’ button on the remote and chose the settings. Now from the settings chose ‘device preference’ and scroll to the ‘reset’ option to choose it. Press enter and that’s all.

Can I use my phone as a remote for my projector?

Yes, you can Definity use your smartphone as a remote instead of the conventional one. All you have to do is download the projector remote control app through the google play store on your phone. Then make sure to sync the app with your projector wirelessly using a Wi-Fi connection. Now give any command to the projector with the app once the Wi-Fi connection is made.

How can I use the projector without a remote?

In case you have lost your projector remote and you are unable to use the projector remote app for iPhone or Android. Then the only and easiest option that you are left with is to use the control panel of the projector. You will find it on the top, sides, or at bottom of your projector.

How do I unlock my projector screen?

If you are in a situation where all buttons on the projector are locked and you want to unlock them. Then you can do so by pressing the enter button on the control panel. Or you can also press the key button on the remote control for a few seconds. Whatever button will you press after a few seconds a message will appear on the screen telling you that the projector screen is unlocked.

Philips Universal Remote Codes List

Remotes significantly simplify life by effortlessly operating all the standard and unique features of your TV. However, it can become quite troublesome when the original TV remote is lost, damaged, or no longer functional. The search for a replacement can be a disaster, especially if you own an older or less common TV model not readily available in your region. This is where the Philips Universal Remote comes in handy.

The ultimate solution to these issues lies in getting yourself a universal remote. The market offers a variety of universal remotes to cater to your needs. In this guide, we will explore how to program a Philips universal remote and provide the essential remote codes required to set it up for specific devices. Keep reading to learn all about the process of setting up your Philips universal remote.

How to Program Philips Universal Remote Control

To program your Philips Universal Remote to control your TV, follow these steps:

  • Power up the TV that you want to control.
  • Ensure that you have fresh batteries installed in your Philips Universal remote.
  • Press and hold the Setup button on the remote. Keep it pressed until you see the indicator light turn red.
  • Press the TV button on the remote. You’ll notice the red light on the remote blink once.
  • Point the universal remote towards your TV and press the power button.
  • The remote will start automatically detecting your TV and program itself. If successful, your TV will switch off, indicating that your remote has been paired.
  • If the remote didn’t find your TV, you will need to use codes.
  • Use the number pad on the Philips Universal Remote to enter the code specific to your TV model.
  • Once you enter the correct code, the indicator on your remote will flash.
  • Confirm this by using the basic buttons such as power, volume, channel, and source buttons on the remote. If your TV responds, then the code has been correctly set up.
  • If your TV doesn’t respond, repeat the steps with another code from the list until you find the right one.

Now, you can browse through the list of codes available for your TV model to program your Philips universal remote successfully.

Philips Universal Remote Codes List

Here is a list of all the codes that will work for different TVs out there. Some brands will have more than one code. In this case, you always have the option to choose codes if one code doesn’t seem to be working for your particular TV.

  • Abex: 0120
  • Admiral: 0603, 0224, 0701
  • Advent: 0219, 0893
  • Adventura: 0019
  • Aiko: 0407
  • Aiwa: 0121, 0221, 0324, 0528
  • Alleron: 0706
  • Amaark: 0603
  • Amtron: 0906
  • Akai: 0112, 0801, 0309
  • Anam National: 0906, 0901, 0104, 0805, 0920
  • AOC: 0002, 0102, 0502, 0003, 0217, 0119, 0320
  • Apex: 0023, 0223, 0123, 0741
  • Archer: 0603
  • Aspect: 0507
  • Audiovox: 0906
  • Axion: 0319, 0793
  • Band and Olufsen: 0620
  • Belcor: 0002
  • BELL AND HOWELL: 0704, 0506, 0601, 0701
  • BENQ: 0709, 0909, 0711
  • Bradford: 0906
  • Broksonic: 0316, 0115, 0626, 0327, 0632, 0041
  • Brokwood: 0002
  • Candle: 0002, 0502, 0019, 00402
  • Capehart: 0119
  • Celera: 0023
  • Celebrity: 0801
  • Centrios: 0518
  • Centurion: 0592
  • Cetronic: 0805
  • Changhong: 0023, 0741
  • Citizen: 0002, 0502, 0906, 0112, 0512, 0520, 0115, 0701, 0402, 0805, 0407
  • Clairtone: 0003
  • Classic: 0023, 0741, 0805
  • CLP: 0008
  • CLP Classic: 0020, 0002, 0006
  • Color Voice: 0602
  • Colortyme: 0002, 0502, 0602
  • Concerto: 0002, 0502
  • Concierge: 0713
  • Contec: 0906, 0802, 0003, 0805
  • Cornea: 0606
  • Craig: 0906, 0805
  • Crosley: 0807
  • Crown: 0906, 0805
  • Curtis Mathes: 0704, 0112, 0614, 0002, 0502, 0601, 0506, 0512, 0437, 0701, 0103
  • CTX: 0603
  • CXC: 0906, 0805
  • DAEWOO: 0614, 0002, 0502, 0611, 0102, 0415, 0905, 0615, 0505, 0826, 0529, 0046, 0609, 0805, 0407, 0303, 0602, 0214, 0403, 0314, 0503
  • Daytron: 0002, 0502
  • DELL: 0522, 0404, 0814
  • Diamond Vision: 0622, 0496, 0810
  • Digistar: 1503, 0118, 0413, 0213, 0318
  • Dimensia: 0704, 0601
  • Disney: 0417
  • Dukane: 0507, 0808
  • Dumont: 0713, 0002
  • Duraband: 0520, 0115, 0317, 0916, 0027, 0447, 0323
  • Dynasty: 0805
  • Elektra: 0701
  • Ekectroband: 0801, 0003
  • Electrohome: 0002, 0502, 0027, 0901, 0803
  • Elite Video: 0321
  • Emerson: 0002, 0502, 0006, 0115, 0506, 0706, 0520, 0906, 0316, 0505, 0614, 0324, 0924, 0626, 0826, 0027, 0327, 0128, 0228, 0632, 0134, 0247, 0605, 0705, 0805, 0703, 0903, 0004, 0519, 0106, 0104, 0304, 0604, 0804, 0005, 0105, 0305
  • Envision: 0002, 0502, 0009
  • Fisher: 0506, 0612, 0428, 0619, 0802
  • Fujitsu: 0321, 0706
  • Funai: 0706, 0520, 0906, 0324, 0247, 0805
  • Futurtec: 0906, 0805
  • Gateway: 0706
  • GE: 0704, 0312, 0018, 0002, 0502, 0006, 0007, 0601, 0835, 0901, 0114, 0103, 0803, 0806, 0310
  • Gibralter: 0713, 0002
  • Goldstar: 0002, 0502, 0102, 0324, 0435, 0802, 0307, 0609, 0217
  • Grundy: 0706, 0906
  • Guestvision: 0721
  • HAIER: 0709, 0223, 0323, 0317
  • HALLMARK: 0002, 0502
  • HARVARD: 0906
  • HITACHI: 0410, 0507, 0815, 0607, 0808, 0002, 0502, 0710, 0802, 0707, 0315, 0515, 0715, 0519, 0324
  • HISENSE: 0908, 0819, 0223
  • ILO: 0421, 1608, 1004, 1903
  • IMA: 0906
  • Infinisty: 0807, 0430
  • Initial: 1608
  • INSIGNIA: 0911, 0520, 0323, 0115, 0914, 0213, 0318, 0247, 0504
  • Integra: 0719
  • INTEQ: 0713
  • Janeil: 0019
  • JBL: 0807
  • JCB: 0801
  • JC Penney: 0704, 0002, 0102, 0502, 0112, 0312, 0512, 0007, 0601, 0310, 0402, 0802, 0103, 0803, 0604, 0806
  • JENSEN: 0002, 0502, 0914
  • JVC: 0607, 0204, 0321, 0508, 0326, 0993, 0802, 0108, 0308, 0715
  • Kawasho: 0002, 0502, 0801
  • Kaypani: 0119
  • KEC: 0805
  • KENWOOD: 0002, 0502
  • KLH: 0023
  • Kloss Novabeam: 0408, 0019
  • Konka: 0906, 0702, 0203, 0306, 0208, 0911, 0842, 0942, 0504
  • KTV: 0906, 0003, 0703, 0805, 0608
  • Kurazai: 0701
  • Lasonic: 0622, 0496
  • LG: 0002, 0606, 0502, 0102, 0324, 0435, 0802, 0307, 0609, 0217
  • LIQUIDVIDEO: 0319, 0418, 0793
  • Lodgenet: 0704, 0821, 0601, 0701
  • Loewe: 0722, 0807
  • LOGIK: 0704, 0601, 0701
  • LUCE: 0107
  • Luxman: 0002, 0502
  • LXI: 0704 ,0002, 0502, 0506, 0807, 0312, 0512, 0601, 0324, 0103
  • MAGNASONIC: 0706
  • MAGNAVOX: 0807, 0002, 0502, 0247, 0919, 0224, 0430, 0402, 0408, 0109, 0715
  • MAJESTIC: 0704, 0601, 0701
  • Marantz: 0807, 0719, 0002, 0502
  • Medion: 0922, 0421, 0417
  • MEGATRON: 0002, 0502, 0507
  • MEI: 0003
  • Memorax: 0002, 0502, 0506, 0706, 0115, 0704, 0601, 0428, 0632, 0701
  • MGA: 0002, 0102, 0502, 0706, 0802, 0803, 0715, 0619
  • Midland: 0704, 0713, 0007, 0312, 0103
  • Minutz: 0806
  • Mitsubishi: 0102, 0716, 0706, 0002, 0502, 0027, 0803, 0715, 0619
  • Monovision: 0205
  • Montgomery Ward: 0704, 0701, 0601
  • Moteva: 0506
  • Motorola: 0603, 0901
  • MTC: 0002, 0102, 0502, 0112, 0512, 0003
  • Multitech: 0906
  • Multivision: 0010
  • Myron Davis: 0822
  • NAD: 0002, 0502, 0512, 0120
  • NEC: 0719, 0002, 0102, 0502, 0901, 0602, 0111, 0715
  • NET TV: 0206, 0014
  • NEXXTECH: 1806, 0318
  • NIKEI: 0805
  • NIKKO: 0002, 0502, 0407
  • Norcent: 0223, 0905, 0207
  • NTC: 0407
  • OLEVIA: 1304
  • ONCOMMAND: 0721
  • ONKING: 0805
  • ONWA: 0906, 0805
  • Optimus: 0618, 0120, 0039, 0739
  • Optoma: 1404
  • Optonica: 0603, 0111
  • ORION: 0713, 0115, 0105
  • Panasonic: 0718, 0416, 0007, 0618, 0807, 0039, 0739, 0345, 0696, 0901, 0608
  • Philco: 0807, 0002, 0102, 0502, 0919, 0408, 0109, 0715, 0901, 0402
  • Philips: 0807, 0022, 0020, 0422, 0122, 0222, 0322, 0002, 0520, 0919, 0521, 0621, 0430, 0247, 0901, 0402, 0408, 0109, 0210, 0310, 0715
  • Philips-MAGNAVOX: 0807, 0022, 0322, 0919, 0224, 0430
  • Pilot: 0002
  • PIONEER: 0120, 0719, 0808, 0002, 0502, 0610, 0519
  • PIVA: 1109
  • Polaroid: 0819, 0918, 0914
  • Portland: 0002, 0102, 0502, 0407, 0415, 0614
  • Precision: 0218
  • PRICE CLUB: 0112
  • Prima: 1503, 0118, 0213, 0318
  • Princeton Graphics: 603 0511
  • PRISM: 0007
  • Proscan: 0704, 0312, 0103, 0601, 0817, 0917
  • Proton: 0820, 0002, 0502, 0910, 0119, 0220
  • Proview: 1104, 1204
  • Pulsar: 0713, 0002
  • Quasar: 0718, 0416, 0007, 0618, 0807, 0039, 0739, 0901, 0608
  • Radio Shack: 0704, 0002, 0406, 0506, 0906, 0618, 0502, 0324, 0835, 0601, 0802, 0705, 0805, 0111
  • RCA: 0704, 0002, 0406, 0007, 0011, 0611, 0811, 0312, 0514, 0720, 0102, 0502, 0601, 0817, 0917, 0835, 0901, 0103, 0803, 0211, 0912, 0114, 0519, 0320, 0420
  • REALISTIC: 0704, 0002, 0406, 0506, 0906, 0618, 0502, 0601, 0324, 0802, 0705, 0805, 0111
  • RHAPSODY: 0003
  • ROKU: 2407, 2014, 0903, 2894, 4395
  • Runco: 0713, 0719, 0712
  • Sampo: 0014, 0206, 0002, 0502, 0119, 0802
  • Samsung: 0112, 0309, 0209, 0512, 0302, 0502, 0002, 0102, 0110, 0818, 0895, 0437, 0802, 0103, 0609, 0012, 0212
  • Samsux: 0502
  • Samtron: 0112
  • SANSUI: 0115, 0632
  • Santeca: 0021
  • Sanyo: 0506, 0311, 0612, 0002, 0428, 0802, 0412, 0619
  • Scotch: 0002, 0502
  • Scott: 0002, 0502, 0706, 0906, 0004, 0105, 0805
  • Sears: 0704, 0807, 0506, 0706, 0112, 0002, 0502, 0312, 0512, 0612, 0520, 0601, 0812, 0509, 0041, 0247, 0802, 0103, 0619
  • Selectron: 1803, 1603, 1703
  • SHARP: 0509, 0913, 0907, 0603, 0002, 0502, 0224, 0228, 0202, 0111, 0813
  • Shogun: 0002
  • Signature: 0704, 0601, 0701, 0903
  • Simpson: 0402
  • SONIC: 0003
  • Sony: 0414, 0902, 0801, 0708, 0639
  • Soundesign: 0002, 0502, 0706, 0906, 0402, 0805
  • Spectravision: 0921
  • Squareview: 0520
  • SSS: 0002, 0906, 0805
  • Starlite: 0906
  • Start Sight: 0008
  • SUPRA: 0002, 0809
  • Superscan: 0812, 0509, 0247
  • Supersonic: 0096
  • Supremacy: 0019
  • SUPREME: 0801
  • SVA: 0223
  • Sylvania: 0807, 0002, 0502, 0115, 0520, 0919, 0324, 0247, 0402, 0408, 0109, 0715, 0717
  • Symphonic: 0906, 0520, 0324, 0247, 0004
  • Syntax: 1304
  • Tandy: 0603
  • Tatung: 0709, 0421, 0901
  • TCL: 6171, 5961, 6031, 6651, 6201, 5771, 2891, 1741
  • Technics: 0007
  • TECHWOOD: 0002, 0502, 0007
  • Teknika: 0704, 0002, 0102, 0502, 0706, 0906, 0112, 0512, 0618, 0601, 0019, 0701, 0402, 0802, 0805, 0407
  • Telecaption: 0313
  • Telerant: 0704, 0601, 0701
  • Tera: 0002, 0220
  • Tevion: 0421
  • TMK: 0002, 0502
  • TOSHIBA: 0517, 0419, 0512, 0613, 0719, 0112, 0506, 0111, 0618, 0627, 0437, 0041, 0094, 0802, 0111, 0313, 0715
  • Trutech: 1504
  • UNIVERSAL: 0806, 0310
  • Victor: 0607
  • Vidtech: 0002, 0102, 0502
  • Viewsonic: 0206, 0808
  • VIKING: 0019
  • VIZIO: 0709
  • WARDS: 0704, 0807, 0002, 0102, 0502, 0706, 0601, 0408, 0109, 0310, 0111, 0513, 0806, 0701, 0402, 0004
  • WESTINGHOUSE: 0915, 0013
  • White WESTINGHOUSE: 0611, 0614, 0415, 0215, 0324, 0529, 0609
  • YAMAHA: 0618, 0002, 0102, 0502
  • ZENITH: 0713, 0502, 0606, 0409, 0710, 0415, 0507, 0714, 0405, 0712, 0015, 0916, 0008, 0002, 0115, 0224, 0324, 0126, 0326, 0826, 0228, 0430, 0632, 0435, 0437, 0903, 0407, 0505, 0701

Conclusion

With this comprehensive guide, you now know how to effortlessly program your Philips Universal Remote control to your TV. Whether you choose the Auto Coding method or manually enter the code for your TV brand, you’re well-equipped to set up the remote.Armed with the provided list of codes and this guide, replacing a lost or damaged TV remote in your house with a Philips Universal Remote is now a simple task.

If you happen to use a code not mentioned in this list, please share the TV brand and code you used. This valuable contribution will help keep the guide up-to-date and reliable for other readers who may be considering purchasing a Philips Universal Remote.

Prerana is a dynamic Columnist and Feature Writer who recently completed her training with TechArena’s internship program. She is now equipped with the skills and knowledge to surpass other sites and blogs in the industry. With a strong desire for excellence, she is ready to work in sync with the Webmaster to excel in her role. Prerana’s dedication, creativity, and determination make her a valuable asset in the realm of journalism, and she is poised to make a significant impact with her exceptional writing and storytelling abilities.

RCA Universal Remote Codes (How To Program)

Published: Nov 1, 2021 by Sarah Mock As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links.

A code is needed to set up your RCA universal remote before you can pair it with your RCA TV, LG TV, Universal TV and other popular brands of TVs. Another code will be needed to pair your RCA remote to your DVD player, DVD combos and blu-ray player.

Here is a list of the universal remote control codes that you will need to properly pair your GE Universal Remote to your electronic devices. For those who are still doing zoom meetings, you will want to snag one of the best zoom backgrounds or grab a few of the zoom backgrounds for kids and teachers.

If you are looking for the GE Universal Remote Codes and programing instructions, I have those for you too.

RCA universal remote has a Code Search button

If your remote has a Code Search button, that is the easiest method to pair devices is by directly entering the device codes.

  • Find the device code for the equipment you want to control. You can find this code in your remote’s manual or use the RCA remote code finder or from the list below.
  • Power on the equipment you want to pair.
  • Press and hold the Code Search button on the remote.
  • While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing. The light on the remote will blink once and then stay steady.
  • Enter the device remote code from Step 1. The light on the remote should turn off.
  • Test the remote. Try several different functions to make sure everything is working. If it is, congrats! If not, proceed to the next set of instructions.

If a code doesn’t work, or you were unable to find one for your device, you can also use the Code Search button to run through all possible RCA universal remote codes until you find one that works.

How do I program my RCA Universal remote for my TV?

  • Find the correct code in the code list in the book that came with the remote or see chart below.
  • Make sure the remote has fresh batteries.
  • Locate your Code in the booklet or see the chart below.
  • Press and hold the TV button and the Power button will illuminate.
  • Continue to hold the TV button while in input the four or five digit code (depending on the remote).
  • Keep holding the TV button and if the POWER button is illuminated you did it correctly! The remote is programmed. If the POWER indicator light blinks four times, you entered the wrong code. Either reenter the code or move onto the next code listed for your TV from the list.

How to program my RCA Universal remote for my Blu-ray DVD Remote Control.

  • Find the code book that came with the remote or see chart below.
  • Make sure the remote has fresh batteries.
  • Locate your Code in the booklet or see the chart below.
  • Press and hold the DVD/Blu-ray button and the Power button will illuminate.
  • Continue to hold the DVD/Blu-ray button while in input the four or five digit code (depending on the remote).
  • Keep holding the DVD/Blu-ray button and if the POWER button is illuminated you did it correctly! The remote is programmed. If the POWER button blinks four times, you entered the wrong code. Either repeat steps by reentering the code or move onto the next code listed for your DVD/Blu-ray from the list.

RCA program codes, an alpahabetical list

You can find this code in your remote’s manual or use the RCA remote code finder or from the list below.

Viewsonic TV remote codes

You can search a remote control code and register it to a desired REMOTE MODE button in the unit’s Setup menu.

After pressing RECEIVER on the remote controller, press SETUP.

With the cursors, select 7. Remote Controller. Remote Mode and press ENTER.

With the cursors, select the REMOTE MODE button for which you want to register a remote control code and press ENTER to display the subcategory selection screen.

With the cursors, select the target subcategory, and then press ENTER to display the brand name input screen.

Select a character with the cursors and press ENTER. Repeat it to enter the first three characters of the brand name.

Select Search with the cursors and press ENTER.

After a search is done, the list of possible brand names is displayed. If the brand name list is not displayed, select Not Listed with the cursors and press ENTER to return to the brand name input screen in step 5.

With the cursors, select the target brand name, and then press ENTER.

When the brand name is specified, the remote control code of the brand and how to register it will be displayed on the TV screen.

Follow the guidance displayed on the TV screen.

If the component can successfully be operated with its registered remote control code, select OK with the cursors and press ENTER.

Only TV remote control codes can be entered for TV.

viewsonic, remote, codes, unlock, projector, using

Program a remote control code in accordance with the input since each button also works as the input selector. (For example, when the CD player is connected to the CD jack, program the remote control code for the CD player to CD)

If the component cannot be operated, select Try Next Code with the cursors and press ENTER to display another code.

Consulting the Remote Control Code List

Find the remote control code in the remote control code list.

Look up the Remote Control Codes for the corresponding remote control code.

The codes in the Remote Control Code List are those known as of the date of publication and may be changed.

The following REMOTE MODE buttons are preprogrammed with remote control codes.BD/DVD: Onkyo Blu-ray Disc/DVD playerCD: Onkyo CD playerSTRM BOX: Apple TV

Only TV remote control codes can be entered for TV.

Program a remote control code in accordance with the input since each button also works as the input selector. (For example, when the CD player is connected to the CD jack, program the remote control code for the CD player to CD)

Press and hold DISPLAY for 3 or more seconds while holding down the REMOTE MODE button to which you want to program the remote control code.

The remote indicator lights in the input mode.

With the number buttons, enter the 5-digit remote control code within 30 seconds.

Programming is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. Try programming again.

Remapping the Colored Buttons

The colored button assignment on the AV receiver’s remote controller can be remapped to match that on the remote controller of the component whose remote control code you programmed to REMOTE MODE. However, you will not be able to remap the colored buttons if Zone 2 is selected.

Hold down the REMOTE MODE button to map and A (Red) simultaneously until the remote indicator lights (about 3 seconds).

Remapping is possible only for codes included in the categories of the Remote Control Code List (DVD player, TV, etc.)

Within 30 seconds, press the colored buttons from left to right, in the order you want to remap.

For example, if the colored buttons on the remote controller of the other component are yellow, green, blue, and red from left to right, press the buttons on the AV receiver’s remote controller in that order.

Programming is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. Try programming again.

Pressing any other button than a colored button cancels the remap operation.

Resetting the REMOTE MODE Buttons

You can reset the remote control code registered in the REMOTE MODE button to its default status. This operation can be executed on a single REMOTE MODE button.

Press and hold Q for 3 or more seconds while holding down the REMOTE MODE button you want to reset.

The remote indicator will light.

Within 30 seconds, press the REMOTE MODE button again.

Resetting is complete when the remote indicator flashes twice.

To reset all the remote controller settings: While holding down RECEIVER, press and hold Q for 3 or more seconds until the remote indicator stays lit. Within 30 seconds, press RECEIVER again. Resetting is complete when the remote indicator flashes twice.