Turn on the BIOS on the Samsung laptop. How to check the performance of the script?

BIOS password reset on the Samsung laptop

There are many options to protect data on a computer or laptop. You can protect files and folders with encryption. sections and discs. Protect your computer with a password using an account and block a laptop using a BIOS password. Most users prefer to add a reliable password to their user accounts so that others can not access the data. The password to enter the Windows system is good ideas, but it cannot prevent you from loading to the entrance screen and use the bypass ways, special programs to find out the password. It is even more important if someone manages to load from the Linux Live CD or Windows loading disk and instantly copy all the data to the external disk.

Since all of the above passwords can be reset and recognized by the workshop, some users prefer to use the bios password. The BIOS password is relatively safe than the user account password, since no one can load from the loading disk or until the Windows system is loaded without entering the correct BIOS password.

Again, the BIOS password can be dropped by deleting the CMOS battery on the motherboard on your computer, but then this is not a simple job, especially on laptops and tablets of the HP, Dell, Acer, Asus, Lenovo, Samsung, Toshiba brand. Therefore, we will analyze how to find out or drop the BIOS password on laptops and tablets, if you forgot it and do not remember. I wonder how it works? A unique master parole is installed in the BIOS from the OEM manufacturer. Using this workshop, you can drop a password and gain access to BIOS.

BIOS password reset

This method should work on most modern laptops and computers. I tried Acer on a laptop and everything worked perfectly.

• Turn on the laptop, computer and enter the BIOS password several times until you are blocked.
• Now you should immediately see the technical code or number, as below in the figure or select Enter Unlock Password. In other versions of BIOS, the code can be indicated in another way (System Disbled [65328] Service Tag [84DN8C9]), but the essence of this does not change.
• Write down all the codes on a sheet or on a mobile phone.
• On your smartphone or another laptop, visit the BIOS password website, enter the code that you saw on the BIOS screen, and then click the Get Password button. Knowing the manufacturer of the laptop, write down the password, if there are several, then write down a few one after another.
• Now go again before entering the password in the BIOS and enter the code that you have already recorded from the site. Next, you can go to the BIOS settings and remove or change the password by entering the same code.

Recently fell in the old 2005 laptop. Benq brand, which is very difficult to find on the Internet and information about it, especially about BIOS. Used one method that helped me.

You need to run the command line, but how to do it if the password is worth? What do you need?

• If you can boot on the desktop, then start the command line on behalf of the administrator.
• You can create a Windows installation flash drive and run CMD.
• You can install freedos on the flash drive itself.

We use the Debug command, which we damage some bytes of the secure control amount of the CMOS region. This is a risky way, but there was no way out and the laptop was not sorry, but everything went well. At the next load, CMOS usually drops its default settings. Do not forget to change the time, date and year, if they fly.

Enter 3 times the wrong password on the laptop.

Get a special service code, 16 characters.

Go to BIOS, drop the password on an empty.

Views: 1,493 Date of publication: 16-05-2016, 18:35

If this article helped you, then you can help in development to our site (any amount is welcome, from 10):

We enter the BIOS on Samsung

The most running keys for entering BIOS on Samsung laptops are F2, F8, F12, Delete, and the most common combinations are FNF2, CTRLF2, FNF8.

This is how the list of the most popular lines and models of Samsung laptops and keys for entering BIOS to them:

• RV513. In the usual configuration to go to BIOS when downloading a computer, you need to clamp f2. Also, in some modifications of this model, instead of F2, Delete can be used instead of F2;
• NP300. This is the most common line of Samsung laptops, which includes several similar models. Most of them are responsible for the BIOS key F2. The exception is only the NP300V5AH, since F10 is used there for the entrance;
• ATIV Book. This series of laptops includes only 3 models. On the ATIV Book 9 Spin and ATIV Book 9 Pro, the BIOS entrance is made using F2, and on the ATIV Book 4 450R5E-X07-using F8.
• NP900x3E. This model uses FNF12 keys combination.

If your laptop or a series of which it belongs is not on the list, then the information about the entrance can be found in the user guide, which goes along with the laptop when buying. If the documentation is not possible, then its electronic version can be viewed on the official website of the manufacturer. To do this, just use the search line. enter the full name of your laptop there and find technical documentation in the results.

You can also use the “poke method”, but usually it takes too much time, since when you press the “wrong” key, the computer will still continue to load, and during the loading time of the OS to try all the keys and their combinations is impossible.

When loading the laptop, it is recommended to pay attention to the inscriptions that appear on the screen. On certain models there you can find a message with the next M “Press (key to enter BIOS) to Run Setup”. If you see this message, then just press the key that is given there and you can enter the BIOS.

Thank the author, share the article on social networks.

The BIOS replaced the new generation of UEFI systems complicated the process of penetration into the holy of saints on laptops. The days have passed in which each user could easily get there, rebooting the computer to press the Delete button. Or, if it did not help, press some other keys from the functional group-F6. F8 or others.

This article will discuss how on modern PC or laptops with modern OSs like Windows 8 or Windows 10 go to BIOS. It seems you have already desperately asking yourself a question. is it possible at all on your laptop? Maybe you have no bios?

Do not be afraid! Now you are easily and simply perform the necessary actions. We will do this with the example of the Samsung NP350V5C laptop with Windows 8 installed on it.

We will also consider how BIOS can be updated, and at the end of the article there is a video on how to configure it before installing Windows 7 or 8 OS.

We divide the BIOS launch process into 2 stages. So, let’s go.

Stage 1: How to go to the boot menu

There are two radically different ways from each other.

The first. using a particularly performed reloading laptop. This is the recommended method. The second is useful for extreme cases if you cannot go into the system to perform the settings of the first method.

Option with proper rebooting

Just draw vertically on the right edge of the screen. until a pop.up menu will appear. You can call it using the keyboard by pressing Win C.

Next, press the parameters item, then “Change of computer parameters”. Then press “update and restoration”.

Far away the incident dragged this option!

Now we click “Restoration” and here it is. the cherished point “Special loading options”. click on “Reloading now”.

Your samsung (or what you have) dutifully restart and find yourself in the boot menu.

Extreme method

I applied this method once when a serious failure occurred on my laptop after updating one of the applications. The laptop hanged at the start and did not want to give out the authorization window. Therefore, I could not go into the system to make a reboot with special parameters.

I needed to do this to restore the system, but if you have the same problem, will help you enter BIOS.

I warn you! This method is possible only in extreme cases when there are no other ways left.

This is done like this (I performed these actions on the production of Samsung production):

• You connect your laptop to the network
• Run the system.
• Disconnect (remove) the battery. the laptop continues to work.
• Disconnect the laptop from the network.
• Waiting for a short time.
• Connect the battery.
• Turn on the network.
• Run by pressing the power button.
• After these actions you will find yourself in the system loading menu.

How to enter the BIOS on a computer running “Eight”?

After the Windows 7 version, many manufacturers decided to disable the ability to enter BIOS when starting a computer. Now the system is loaded differently:

• Pull the mouse cursor into the right side of the monitor and click the “parameters”;
• In the lower part, select “Change of computer parameters”;
• In the next window, we are looking for the subsection of “General”;
• On the right side of the opened menu, we are looking for “special load options”, click “Reloading now”, we agree with a pop.up message about confirmation of the action;
• After rebooting, you will see a special integer in which you can run the shell you are interested in.

BIOS entering Windows 8.one

The procedure in this version is slightly different from the previous one, the user must adhere to the following actions:

• We go into the “parameters” and open the “Changing of the computer parameters”;
• We go to the “Update and Restoration” tab;
• Then you need to press the “Diagnostics” key, then select additional parameters “;
• In the “loading configurations”, click the “built.in UEFI” parameters and reboot the device.

Each bios has its own approach

But perhaps this option will not work. The fact is that Samsung, although he did not win the entire laptop market, but presented a large number of various models on it (NP, R, RC and others), which, in addition to electronic filling, differ in the ways of entering BIOS.

• For example, for the RV 513 line, in addition to F2, it is also possible to test Delete;
• In a slightly numerical series of ATIV Book, there is also an exception to the general rule. Owners of ATIV Book 4 450R5E-X07 should remember the “F8” button.
• In the most common NP 300 Seri, the F2 key is also the main. But in the NP 300V5AH model, F10 should be burned;
• In a more advanced NP900X3E model, you need to press two FNF12 keys at once.

As you can see, a variety of ways can occur. And this is mostly due to the filling of your laptop.

Therefore, in addition to F2, you always need to have in stock such “bios” keys as F8, F12, Delete, or popular key combinations “FNF2”, “CTRLF2” or “FNF8”. But it is better to pay attention to the inscriptions that appear on the monitor during loading. Especially on the following: “Press (key) to run setup”.

Actually, this is and all you need to know for the unhindered BIOS load on the Samsung laptop. I think these simple skills will easily master. And you can handle your PC at a professional level.

Samsung laptop loading from flash drive

If you suddenly wanted Download Samsung laptop from flash drive. then you will try to enter the laptop loading menu using the F10 key when loading and select your connected flash drive there, but nothing will come of it, since first of all, you need to make small changes in the parameters of the BIOS laptop. Turn on the laptop and immediately click F2 when loading, enter the BIOS, go to the Advanced section and set the Fast Bios Mode parameter to the Disabled position.

Then we go to the Boot section. We are interested in the option “Secure Boot”,

We also put it in the Disabled position and click “Enter”

A warning is released about the possibility of loading a laptop with an error.

We agree, click “Enter”. Below is an additional parameter “OS Mode Selection”,

We put it in the position “CMS OS” or “UEFI and LeGacy OS”

And click “Enter”. A warning appears again about the possibility of loading a laptop with an error, “Enter”.

We save the changes made by us in BIOS, click “F10” on the keyboard. To the question “save the changes made and restart?”Click” Enter “. Yes.

The laptop is rebooted, click F10 and get into the boot menu, select the flash drive, the Samsung laptop is loaded from the flash drive.

If you cannot get into the laptop loading menu, then you need to change the priority of the boot device directly in BIOS. We enter the BIOS, go to the Boot section. Further Boot Device Priority option ,

There should be our flash drive here, set it up with the first loading device, then press F10 (save the changed settings) and reboot). After rebooting, your laptop will load from the flash drive.

BIOS entry teams on laptops can be certainly different even one manufacturer. This is due to the fact that various models of motherboard are installed in any of them.

Instructions

When you turn on the laptop, press the PAUSE key to view the text on the screen. Pay attention to the inscription Press F2 to Enter Setup. In return F2, of course, there may certainly be any key or even a combination of several. The most common of them are F1, F2, F8, ESC, F10, F11, F12 and so on. You can also use the selection method. To get out of the pause mode, click Enter.

Look on the Internet information about the motherboard model. In order to find out its marking, open the properties of the computer by pressing the right mouse button at the corresponding point “Start” menu. In the new window that appears, select the “Equipment” tab “.

Open the device manager and find your system board in the list of computer configurations. Rewrite its name, open the browser and execute a request for the rewritten information, while you can add to Enter Setup/BIOS to the search line.

Also, some dilapidated models have information about the computer system payment on a special sticker on which the laptop model is registered, check the rear wall of the computer for the presence of such. Also check the battery compartment by stretching the battery in advance.

Having opened the BIOS program, use the arrow keys to go over the menu items. On the metamoosis of one or another parameter value, the plus and minus buttons are usually programmed, however, everything can depend on the model of the motherboard.

Be extremely attentive, introducing metamososis to the bios parameters, from the fact that this program is responsible for the operation of each content of the laptop. If later there are any difficulties or tasks in the operation of the laptop, restore the initial values ​​using the corresponding command prescribed at the bottom of the BIOS system window.

Modern monitors make it likely to make an image adjustment and other parameters independently, through the control system. The method of metamoosis and adjustment of settings is an engineering menu.

Instructions

Turn on the TV. Click an Info-Menu-Mute-Power step. This combination is suitable for most PDP and LCD TVs. But some models, exclusively with a diagonal up to 23 inches do not respond to this sequence. They have a different combination-MUTE-1-8-2-Power On. It must be noted that all these keys must be pressed stepwise and as rapidly as possible (not more than 1-2 seconds for everything). If it doesn’t work out the first time, try again. A window with a hat “Service menu” appeared in front of you.

Move along the menu with support for control buttons (to the right, left, down, up). In order to prefer an exciting section. click the “OK” button. To enter the upper tier, click the “Menu” button. The design of the engineering menu is changing every year, new platforms and firmware are released, but the main parameters remain unshakable:- Panel on Time- the first line, means “Panel Ecubing”.- Ready. turning on and off DTV tuner (ON and OFF, respectively).- Option Table. does not depend on the entrance and is responsible for general TV settings.- Shop Mode. store mode (ON. Disabled, OFF. enabled).- Dimm Type. information about the matrix that is installed on your model.- Reset. resetting settings.

Make adjustments to the settings. Before doing this, think well whether it is worth it. Having changed some parameter, it is allowed to completely knock down all the settings, later than without the help of the master you will not figure it out.

Savage the settings. If you want to restore typical (factory) settings. run the “Reset” command.

Disconnect the TV in order to leave the engineering menu.

If later the installation adjustments have worsened the image or other catchs appeared, go back to the menu and download typical installations (Reset).

Replacing the motherboard software allows you to improve the effectiveness of the computer and add new probabilities related to its configuration. This process must be performed only later than thorough preparation and reading of necessary instructions.

Instructions

If you have updated the BIOS and want to turn its dilapidated version, then download the necessary firmware. To do this, more cancel the formal site of the manufacturer of the applied motherboard. If you work with a laptop, then visit the developer’s developer’s website website.

BIOS update

Updating BIOS is strongly recommended only from official manufacturers’ sites.

In my case, in the browser you need to go to the Samsung website and enter the full name of the model (written on the bottom of the laptop body): NP350V5C-S1JRU

After pressing the Enter button, a list appears in which we select a item from the category “Built.in software”

Next, leaf through the screen down and find the Update Software, click on it, which leads to download the BIOSUPDATE file.EXE

Since I downloaded it from the official Samsung website, I can safely run it

and update the BIOS laptop:

In my case, the last update has already been established. If you have a new version, you have to press the last button to update the BIOS.

We enter the BIOS on Samsung

The most running keys for entering BIOS on Samsung laptops are F2, F8, F12, Delete, and the most common combinations are FNF2, CTRLF2, FNF8.

This is how the list of the most popular lines and models of Samsung laptops and keys for entering BIOS to them:

• RV513. In the usual configuration to go to BIOS when downloading a computer, you need to clamp f2. Also, in some modifications of this model, instead of F2, Delete can be used instead of F2;
• NP300. This is the most common line of Samsung laptops, which includes several similar models. Most of them are responsible for the BIOS key F2. The exception is only the NP300V5AH, since F10 is used there for the entrance;
• ATIV Book. This series of laptops includes only 3 models. On the ATIV Book 9 Spin and ATIV Book 9 Pro, the BIOS entrance is made using F2, and on the ATIV Book 4 450R5E-X07-using F8.
• NP900x3E. This model uses FNF12 keys combination.

If your laptop or a series of which it belongs is not on the list, then the information about the entrance can be found in the user guide, which goes along with the laptop when buying. If the documentation is not possible, then its electronic version can be viewed on the official website of the manufacturer. To do this, just use the search line. enter the full name of your laptop there and find technical documentation in the results.

You can also use the “poke method”, but usually it takes too much time, since when you press the “wrong” key, the computer will still continue to load, and during the loading time of the OS to try all the keys and their combinations is impossible.

When loading the laptop, it is recommended to pay attention to the inscriptions that appear on the screen. On certain models there you can find a message with the next M “Press (key to enter BIOS) to Run Setup”. If you see this message, then just press the key that is given there and you can enter the BIOS. We are glad that we were able to help you in solving the problem. Describe what you didn’t succeed. Our experts will try to answer as quickly as possible.

Was this article helped you?

Samsung laptops in a niche of sales are not the first or third place, but still many users buy these laptops and actively operate them. However, in order to set in the right order loading wheels on the Samsung laptop to install Windows, for example, you need to go to BIOS. Read more about how this is done in the article.

Keys and their combinations

There are several models of laptopes from Samsung. This includes budget lines and expensive products. For each of them, the manufacturer has its own button for entering BIOS.

The standard key for entering the input and output system is F2 or in extreme cases DEL. To enter the BIOS system on the Samsung laptop, the user will need to do the following:

• Reload the laptop.
• When turning on several times, press the F2 button. A window with the settings of this program will open.
• Now the user will be able to set the time, change the loading wheels or passwords to enter Windows OS.

However, some models do not work standard keys. For example, for the following types of laptopes, the keys for entering the base system will vary:

• on the RV 513 model. except F2. The user should try Del;
• If the user has a non-card ATIV Book 4 450R5E-X07, use the F8 button;
• Budget model NP 300. F2 key;
• But on the Samsung NP300V5AH laptop, you will need to press the F10 key several times.

There are types of laptops where you have to use two keys for entering the computer system system. These include the advanced modification of Samsung NP900x3E. It will need to click on the FNF12 button.

Attention! If not one of the above buttons has approached, then you need to look into the operating manual and find the desired key in it.

In its absence, you need to find out the name of the motherboard and find the operating guide on the Internet for the Internet.

To find out what a motherboard is on a laptop, you need:

• Download program AIDA 64.
• Launch it.
• Click in the left window according to the “System board”.
• Go to Google and register its name in the search line.
• Find a manual to her.

If Windows is installed and the owner of the device wants to simply change the BIOS settings, then you can not use the keys, but immediately go into the system. This is necessary:

• Squeeze the Win C buttons at the same time. Win is a key with the Windows window icon.
• A pop.up menu will open.
• Select “Parameters” in it.
• Climate the left mouse button by “Change of computer parameters”.
• Press “update and recovery”.
• Select “Special loading options”.
• Click “Reload”.
• Now the user will be in the laptop settings system or in BIOS.

How to go and configure the Samsung MP355 laptop BIOS for installing Windows 7 or 8 from a flash drive or disk

Consider what needs to be done to enter and configure the BIOS and the Samsung MP355 laptop for installing the Windows 7 or Windows 8 operating system with USB device (flash drives) or CD/DVD disk.

Flash drive or disk must first be installed in a USB port or CD/DVD drive, respectively.

Turn on the laptop. While turning on the laptop, click the F2 button to get into the BIOS.

In the main BIOS menu, we go to the Boot tab. We go down and select the subparagraph “Secure Boot”. By default there is “Enabled”. Press the “Enter” button. In the window that appears, select the “Disabled” item. See the image below.

A new item will appear on the vertical menu. “OS Mode Selection”. We go to him. The default is the value of “UEFI OS”. Press the “Enter” button. A new window will appear. In it, select the item “UEFI and Legacy OS”. See the image from below.

Return to the main menu BIOS. We go to the Advanced tab. We get down and select the menu item “FAST BIOS MODE”. The default is the value of “Enabled”. Press the “Enter” button. In the window that appears, select the “Disabled” item. Press the “Enter” button. See the image from below.

Return to the main menu BIOS. We go to the menu tab “Exit”. Select in the vertical list the item “Exit Saving Changes”. Press the “Enter” button. In the window that appears. We are convinced that the “Yes” button is active. Press the “Enter” button again.

The laptop will automatically begin to restart. After that, let’s go again at BIOS. The computer will now be able to see the connected device. a flash drive or disk.

Select the Boot menu tab. Next, select the item “Boot Device Priority”. This item is the first on the list. Press the “Enter” button.

Here our actions depend on which device we will be loaded with.

If we load from the disk, then go to the point “Boot Option #1”. Press the “Enter” button. In the window that appears, select CD/DVD drive. Press the “Enter” button. See the image below.

If we load from the flash drive, then in the item “Boot Option #1” we leave an active device of the hard disk.

We go down to the “Hard Drive BBS Priorities” menu item. Press the “Enter” button.

In the next window, select the item “Boot Option #1”. Press the “Enter” button. In a small window that appears, select our flash drive. In our case, it is “Generic Flash Disk 8.07 “. Press the “Enter” button again. See the image from below.

Return to the BIOS main menu, by pressing the Escape button several times. We go to the “Exit” tab.

Press the Enter button twice to save changes in the BIOS settings.

The laptop will automatically begin to restart. After rebooting, a window will appear that will indicate that you can start loading the Windows 7 or Windows 8 operating system from a flash drive or disk.

How to go to BIOS from the Samsung laptop

If you have the question of how to go on the Samsung laptop to BIOS, you should familiarize yourself with the commands for entering. Just keep in mind that they can vary even if the manufacturer is the same. It is easy to explain: in each laptop different options for motherboard are installed. And if you need repairs, then you can read in more detail at the link of TVS-SPB.ru.

How to include BIOS in Samsung

So, turn on the laptop and when turning it on, press on the “PAUSE”. then on the display you can view the text. Find the inscription “Press F3 to Enter Setup”. Where F3 is written, you may have another key. Sometimes this may be a combination of all kinds of keys. Here are the most common options on the Samsung: F1-2, ESC, F8, F10-12 device. Sometimes users have to use the selection method. To leave the pause mode, click on “Enter”.

You can go to the Internet and look for data on your motherboard there. Just how to find out the marking? To do this, go into the properties of the device (you need to press the right button in the “start” point you need). A window will appear, there you need to switch to “equipment”.

Go to the task manager, check out the list of configuration of the device. there should be your system board. Now just remember the name of the board, find information about it on the Internet.

You can take a closer look at the back of your laptop: on some Samsung models a special sticker is pasted there. a model of the laptop itself is spelled out there, and the desired information may be given the right information. You can see the presence of an information sticker on the battery compartment for the same purpose, having previously removed the battery from there.

You managed to go to BIOS? Use arrows there to go to specific menu items. Usually, for changes in certain parameters, the keys are programmed by default and., But again, this may depend on a specific board.

BIOS in the answer for the full operation of the laptop. it is not worthwhile to change the parameters of the program! Therefore, without appropriate knowledge, it is better not to go bios. If the device began to work incorrectly after maintaining the changes made, it is worth restoring the initial values. To do this, just use the corresponding team, it is registered in the window of the BIOS system in its lower part.

As you can see, just start BIOS on your laptop. But to make changes to it is an important point on which your laptop will depend in the future!

How to update BIOS on a laptop?

So, you have a hard drive with an installed OS, you inserted it into your laptop. We start it, the OS should load. Install pre-downloaded drivers on network adapters, connect a laptop to the Internet via Wi-Fi or in a cable.

We launch a program of the BIOS transformation downloaded with off. site. This is what the BIOS update Update window looks like Samsung laptops (against the background. Samsung website, from where everything was swinging):

As you can see in the picture, the current version of the BIOS system coincides with the latest version of the BIOS available for downloading (P09rap firmware). This is because I took a photo after the update.

These versions most likely do not coincide, so, firstly, we are convinced that you are inserted and charged by at least 30% battery, and a network device is connected. Secondly, click the “Update” button.

Next, we do not touch the computer, it will do everything you need, and will go into a reboot. We are waiting for BIOS to upgrade.

So, the progress of the BIOS renewal reached the end, the laptop rebooted. Most likely now the OS will stop loading, but now this is not a problem for us, because BIOS is unlocked! Click when loading F2, change the settings for the we need (turn off the Secure Biot and turn on Legacy CSV) and calmly put any Windows, which we want!

The laptop does not go to BIOS. [decided]

It is possible that the problem when the BIOS does not start when the F2 is pressed, can also be found on other laptops except Samsung. Also, it can occur when replacing a hard drive. Everything is solved by updating BIOS to the latest version. And the BIOS update is not such a difficult procedure as you could verify by reading this article!

The most important thing is that a sudden disconnection of the power does not happen, otherwise we will get a “brick”. Which will have to be revived by analyzing the laptop, falling out the biox microcircuit thermophenes, flashing it through the programmer, and sealing back. This operation, accessible is far from everyone. I will tell you about this in one of the following articles on CompBlog.ru.

Glad if I could help you with my note! There are questions left. write in the Комментарии и мнения владельцев! Do not forget to subscribe to the blog updates, so as not to miss the repair and configure of your computer equipment!