Tuning Channels on Samsung Digital TV

How to set up digital television on your TV

Tuning Channels on Samsung Digital TV

The advent of digital television has caused a kind of excitement, as digital content has become available to a wide range of users. Recently, it is this direction of television that has been developing very actively, a large number of offices have appeared, which will provide services for connecting and setting up digital television for a fee. The good news is that you can set up digital television on your TV yourself.

So in this article we will take a closer look at all aspects of the setup, both in general and for TVs from specific manufacturers. It is worth noting that there are different types of digital television. All proposed schemes relate to the cable “digit”.

First, consider the general scheme for setting up digital television reception. Depending on the TV model, the sequence of operations and item names may differ slightly. Do not worry, further we will consider the features of customization for specific brands, all points will be illustrated.

Use the remote control to enter the menu of your TV. In the window that appears, select the “Options” item. In order to go directly to the configuration, you must select the item “Auto tuning”. A window should appear on the screen prompting you to select one of the signal sources: cable or antenna. We select the first option, then press the “Start” button.

After the operations carried out, a window should appear in which, as a signal source, select the item “Digital” and then press the “Start” button again.

We are in the final stages of setting up digital television. In the window that appears, we find the item “Search mode”, several options will appear, we need the item “Full”. Click and fill in all the fields with the data indicated below.

Frequency (kHz). 314,000 (314 MHz)

Modulation. 256 QAM.

Transfer rate. 6875 kS / s

Please note that some TVs support network search. This means that you do not need to manually specify the above parameters. Just after selecting the required search mode, press the “Search” button. As you can see, setting up digital television on your TV is quite simple. For those who are confused, read further illustrated instructions.

Setting up digital TV on LG TVs

It is logical to assume that different models of TVs from the manufacturer LG use their own firmware and menu. However, in general, the menus of all TVs have characteristic similarities. Find the “Menu” button on the remote control, press it and a window appears on the screen in which you need to select “Options”.

In the “Options” tab you will see several parameters available for change. In the item “Country” you must specify either Germany or Finland.

After that, you need to go to the “Settings” menu, there select the “Autosearch” item in which specify “Cable” as the connection method.

After the done manipulations, a window should open in which you need to select the “Settings” item and specify all the values ​​as in the figure below.

If you have followed all the instructions correctly, then after the search, the TV will find all available channels, as well as radio stations.

Please note that LG TVs use the automatic channel update function, which resets the existing channel list at regular intervals and starts a new search. For convenience, it is advisable to disable this function. To do this, go to the “Digital cable settings” tab and turn off automatic updates. Thus, setting up digital TV on LG TVs is quite simple. It is enough to show a little care.

Setting up digital television on Philips TVs

So, find the “Menu” button on the remote control and use it to enter the menu of your TV. Next, you need to go to the “Configuration” section.

In the window that appears, click on the “Installation” item, after that a secondary menu will appear on the TV screen, in which you must select the “Channel setup” section. Another submenu will appear, in which we select the item “Automatic. Installations “. If you have completed all the transitions correctly, a message should appear that warns about the upcoming update of the list of all channels. Click “Start”.

Next, select the item “Reinstall channels”.

Go to the “Country” section and choose from the list either Finland or Germany.

Select “Cable” as the connection method.

Before starting the process of searching for channels, go to the “Settings” item and make the settings according to the images below.

Now you have managed to set up digital television on your Philips TV. You can start direct channel search, for this click “Start”.

Setting up digital television on Samsung TVs

Press the “Menu” button on the remote control. The menu of your TV should appear on the screen. We go to the “Channel” section (depicted as a satellite dish). Several tabs will appear on the right, select “Antenna” and select “Cable” as the connection type. Next, you need to go to the “Country” tab and specify the “Other” parameter. In this case, the TV must ask for a pin code. If you did not change it yourself, then enter 0000 (default value).

Go to the “Auto-tuning” tab, select “Cable” as the signal source.

Set all the parameters as in the image below, then click “Search”.

After all operations, your TV will find all available channels.

Setting up digital television on Toshiba TVs

Use the “Menu” button to enter the TV menu and select the Russian menu language.

Find the “DTV Manual Tuning” tab.

Manually enter all parameters as in the image below.

After that, click “OK”, the search for channels will start.

We have analyzed in detail a diagram of how to properly set up digital television on a TV. We backed up all the sequences with images for better perception.

How to find out your TV model and year

Setting up digital channels on Samsung begins with specifying the year of release and the TV model. You can do this in 2 ways: go to the TV menu or look at the label on the back panel.

  • Through the TV menu. Find the “Menu” button on the remote control. Select “Support”. Then, “contact Samsung”. A screen will open with the item “model code”.
  • On the device label. The information is written in the form of a code, where each letter has its own meaning, for example, UE32F6800. The information is decoded as follows:
  • UE. TV type: UE / LE. liquid crystal, PS / PE. plasma.
  • 32. diagonal, varies from 19 to 105 inches.
  • F. year of manufacture, its classification: A. 2008, B. 09, C. 10, D. 11, ES / EH. 12, F / FH. 13, H / HU. 14, J / JU / JS. 15, K / KU / KS. 16, M / MU / Q / LS. 17, N / NU. 2018, S. premium variants of different years.
  • 6800. digital designation of TV modification.

When the model is identified, check if it supports digital signal reception without a special attachment.

How to determine the presence of a tuner

Without an additional set-top box, you can set up a TV with a built-in or external tuner to receive a DVB-T2 signal. The module easily decodes 20 basic channels, which are transferred to digital broadcasting.

You can check if there is such equipment in your TV model on the official Samsung website or in the passport for the TV. On the manufacturer’s resource, it is enough to find the column “technical characteristics”, go to the “Broadcasting system” or “Tuners”, enter the model data and see if the DVB-T2 column has a plus or not. If available, digital TV is available.

What to do if the TV does not see channels when searching

Auto setup for digital TV on Samsung doesn’t always go smoothly. The causes of failures may lie in the antenna, receiver, and the correct connection of the TV to the equipment. To eliminate and restart autosearch, you must:

  • Check if the receiver is connected to the TV correctly. If the connection is incorrect, the TV does not recognize the device and when you press HDMI 1, the information “no signal” will be displayed.
  • Reset receiver settings to factory settings. perform a complete reboot. To do this, go to the menu, find the item “Settings” and “Reset” or “Restore factory settings.” If a password is required, enter 0000, 1111 or 1234.
  • Try reconfiguring or reconnecting the antenna. You can purchase a signal amplifier that will provide a good connection. Consider the location of the house relative to the tower. The further it is, the more the antenna is needed.
Read more:  How To Reset Settings From Samsung

The exact recommendations for advanced digital TV settings on Samsung TV vary by hardware model.

Channel tuning: automatic, manual

General scheme for searching TV programs for receivers:

  • On the console from the console find the “Menu” button, most often it is the Sourc key
  • In the window that opens, press HDMI 1. digital broadcasting will go through it.
  • Find “Autosearch” and click start. The set-top box itself will select the appropriate frequency and save TV programs.

The exact sequence of searching for TV channels depends on the selected model of the receiver or the cellular operator to which you connected to watch digital TV.

How to connect and configure the set-top box

Before setting up digital television on Samsung TVs through a set-top box, you need to assemble and connect the equipment. To do this, do:

  • Check the antenna installation, which should be matched with the attachment. Installation and adjustment instructions are included with the equipment. Cellular operators offer a cable connection through a common wire in the entrance.
  • Select and purchase a suitable receiver. It is selected by the number of additional options. There are options with the ability to record information, media player function, scheduler, TimeShift.
  • Look at the option of connecting the receiver to TV: tulips, HDMI, antenna cable. Get an adapter.
  • Connect the equipment and turn it on. Adjust the 20 basic channels available for free viewing.

If you want to watch more channels, you will have to buy a special CAM module for the receiver with an antenna. Then the number of TV shows will depend on the selected package.

Steps for setting up channels on Smart TV

“Smart TVs” are considered the most modern and high quality models. They adjust automatically depending on the type of signal. Most modern TVs support Smart broadcasting. To clarify the information, you can go to the official website of the manufacturer.

The broadcast quality depends on the speed of the home Internet. Setting up digital television on a Samsung Smart TV follows the steps below:

No additional configuration is required. If the signal and quality of the Internet is poor, there will be interference on all channels.

Features of viewing channels through a set-top box

When choosing a digital set-top box, you should pay attention to the connecting cable connected to the TV. Check out which connectors you have: HDMI 2.0 or 2.1, tulips. Purchase an adapter to connect the set-top box and TV.

Samsung TV varieties

Samsung has been making home appliances since 1930. In 1998, the company introduced the world’s largest LCD TV, measuring 30 inches. Modern models can be divided into 3 options:

  • Models with built-in tuner for DVB-T digital reception
  • External device options.
  • TVs that do not support digital signal need a set-top box.

The digital channels themselves are broadcast via the Internet for Smart TV or via IPTV. Before setting up the equipment, you need to find out if the TV supports DVB-T2, and specify the year of manufacture and model.

During 2019, the broadcasting of analogue channels was turned off. A smooth transition in different regions was given from 1 to 3 months. New TVs did without purchasing set-top boxes, the old ones needed additional equipment. But, despite the duration and smoothness of the transition, not all users have learned how to tune digital channels on Samsung TVs.

How to auto-tune broadcasting on Samsung

You can set up digital television yourself or use the services of a telemaster. The setting is carried out immediately after the first connection. On Samsung TVs, the setup steps are the same. Such actions will not take much time. Even if you’ve never done a TV setup before, it shouldn’t take you more than 10 minutes. If you do everything right, you can enjoy watching channels in good quality.

Configuration can be done automatically or manually. Everything will depend on what year your TV was produced. Newer models have a special tuner that helps you quickly tune your TV. You just need to connect the antenna to the TV. If you have a Samsung TV with the new Smart TV feature, then you can do auto tuning. To do this, follow these steps:

  • We go to the Samsung menu and select “Broadcast”.
  • A window will open, in it you need to select “Auto-tuning”.
  • Click on the “Start” button.
  • Now select the “Full” search mode and start the scanning process.
  • This completes the television setup. Now it remains to wait for the Samsung TV to independently search for available channels and store them in memory.

It so happens that the channels disappear. In this case, you will have to configure special modules that will become available in the TV menu. After setting up all the items, you need to check the quality of the transmitted signal. If the channel has not been activated, you must go through all the steps to configure again.

How to tune digital channels on a Samsung TV

High quality television has long been included in our lives. Almost every house and apartment has a new TV system, and some of the brands of TVs have a Smart function (for example, Samsung).

At the same time, smart technology requires a smart user for itself. Since it will take some skills to set up digital TV. There is nothing difficult in setting up television, but you still need to be very careful and know how to connect a TV to a TV. Many Samsung TV users often ask questions about how to set up TV on a Korean TV.

How to set up Samsung manually

The manual method is used for older Samsung models. To do this, you need to do the following:

  • Select the “Menu” button on the control panel.
  • Now you need to click “Channel”, select “Antenna” and change it to “Cable”.
  • The Country submenu will be available. Here you will need to enter a password, pin code, whatever you want to call. For each TV, it will be different. For example, the code is four zeros. Now you need to put the country of residence. Select “Russia” from the list, if not, then you need to select others or “Eastern Europe”.
  • Now you need to go to the “Cable parameters” section. It is usually found in the main menu. If it is not there, then you need to look in autotuning. In some Samsung models, the developers decided to do just that.
  • After you managed to find the desired section, you need to open it and insert the parameters: beginning. 298000 KHz, ending. 362000 KHz. All other parameters are already there.
  • Now you need to open auto-tuning. If exclusively digital TV is used, then this item must be selected. You can also install analogue channels or digital TV plus analogue. Then click “Next”.
  • Now you need to open the search mode and drive in “Network”. Click on the “Search” button. We are waiting for a few minutes. This is the time for the search and tuning of the necessary channels to end automatically. Then click “OK”.

After the system performs a search, all channels that the cable TV managed to find will be automatically saved. But, only those that you have selected will be shown.

How to tune digital channels on a Samsung TV

Digital TV appeared in our country several years ago. Since then, it has been a frequently used channel connection option. And this is justified. After all, using digital TV, channels do not need to be tuned several times, just one is enough. Also, you do not have to adjust the antenna every time or re-tune the TV. In addition, there is no interference in the form of stripes or snow. Of course, if there is a breakdown on the tower, then there will be no signal and you will not be able to watch your favorite program.

Such a television format as DTV is the most popular among users. You don’t need to call a specialist to connect to free channels, you can do it yourself. The main thing is that the TV supports the DVB-C tuner.

Read more:  Call recording on Samsung s10

Samsung TVs have such tuners. over, both on old models and on new ones, you can make a similar setting. This is what we will talk about in the article.

How to Delete Channels on Samsung TV

If you don’t need a channel, you can delete it. To do this, you need to follow simple steps:

  • You need to open all channels on your Samsung TV.
  • Select the item “Dispatcher”.
  • Now you need to select the channel that is not needed. You can also select multiple channels for deletion at once. To do this, you need to use the yellow button on the control panel.
  • Now we press the “Tools” button, it is located on the remote control. Or you can use the button on the TV screen “Delete”.

After you confirm the actions, the channels will be removed from the list.

If you have a new Samsung TV model, that is, there is a Smart T.V. system, then the channels are deleted as follows:

  • You need to find the button on the Smart Hub remote. It means system hub.
  • You need to click on it. A form with the listed channels will open.
  • At the top right, there is an editing section. It will describe all the steps to remove channels. You should only follow them.

Cable television is the next step in all television. Now you can watch programs and films in very good quality. We tried to tell you in detail about setting up digital TV on a Samsung TV. The setup will differ depending on which Samsung TV you have. Find and configure TV faster and automatically on the new model. On older models, you will have to manually configure it. Anyone can customize the TV on a Samsung TV. You can also edit channels on your TV. You can delete channels that you are not interested in.

Is it possible to watch a number without a prefix

Many modern TVs, in particular those released after 2011, are equipped with a built-in DVB-T2 tuner. In this case, digital channels will be caught without an external set-top box. To understand if there is such an option in a particular TV model, you should refer to the operating instructions. If it is lost, the official website of the company will help, where you can see its specifications by model number.

If the TV does not have this support, you will have to buy an additional set-top box to receive digital TV. It is inexpensive. about 1000 rubles in the basic version, which is suitable for most users.

Algorithm for manual channel tuning

Manual search is used if the automatic search did not satisfy the user for some reason. For example, not all channels were found.

To carry out the operation manually, press the Menu button on the remote control and go to Settings.

  • Select “Channel”. item Antenna, which we change to Cable.
  • In the “Country” submenu, the system will ask for a PIN-code. enter four digits 0. If it is in the list. put Russia, no. others or Eastern Europe.
  • Next, go to the section cable search parameters. If it is not in the main menu, then you need to search in autotuning.
  • Here you need to enter the frequencies manually. For terrestrial digital TV, you can get them on the website rtrs.ru, choosing your location on the map and the nearest repeater. The frequencies of the cable TV providers should be checked with the operator.
  • After that, we start the search, ticking the boxes “Full” and “Digital channels”. When the automation finishes its actions, then all configured channels will appear. To save, press the OK button.

Digital Channel Tuning Methods on Samsung TVs

Modern high-quality digital television has entered our lives. now almost every home has the latest TVs, many of which are equipped with Smart functions. However, smart technology requires certain handling skills: it can be difficult to understand its settings. Often users ask the question: how to tune digital channels on a Samsung TV. The tuning algorithm depends on the TV model.

Auto tuning

The names of the automatic setup items may differ slightly depending on the series. In general, it is carried out as follows.

  • Press the button with the house icon to select Source / TV / OK.
  • Again, by pressing the button with the house icon, go to Settings / Broadcast / OK.
  • After that select Autotuning / Start.
  • You should set the desired type of signal: it can be Antenna or Cable (depending on whether you can catch TV from an antenna or run a cable).
  • If the signal type was set to Cable, you must additionally set the cable search parameters. To do this, in the list of operators offered by the TV, scroll to the end and press Others.
  • Select Digital Channel Search / Full / Scan.

At this stage, the digital TV setup can be considered complete. now the TV will independently search for available channels and store them in memory. If necessary, they can be sorted in the order convenient for the user.

After completing all the settings for digital television, visually check the quality of the transmitted signal. If for some reason the TV channel is not activated. go through all the points again.

Change channel list

After searching in automatic mode, all the channels that cable TV has are saved, but the system will show only those that you have selected.

It is very convenient to delete unnecessary channels. From the OSD menu, you need to call the Settings, the Broadcast section. In the item “Channel change”. Here in the list you can tick unnecessary TV channels and delete them by pressing the Tools button. After the obligatory confirmation of actions, the channels will be deleted.

You can also move channels. In the same menu item, select the desired channel with a tick, and use the Tools button to select the Change item. The channel is moved using the arrows. Finally, click OK.

We have tried to tell you in great detail how to tune digital channels on various Samsung TVs. If the picture quality is mediocre. check the correct connection of the cable from the antenna or its integrity, this will help to improve the TV signal. You can also try choosing a different antenna. For clarity, here’s a video on how to set up digital TV:

Auto tuning

The names of the automatic setup items may differ slightly depending on the series. In general, it is carried out as follows.

  • Press the button with the house icon to select Source / TV / OK.
  • Again, by pressing the button with the house icon, go to Settings / Broadcast / OK.
  • After that select Autotuning / Start.
  • You should set the desired type of signal: it can be Antenna or Cable (depending on whether you can catch TV from an antenna or run a cable).
  • If the signal type was set to Cable, you must additionally set the cable search parameters. To do this, in the list of operators offered by the TV, scroll to the end and press Others.
  • Select Digital Channel Search / Full / Scan.

At this stage, the digital TV setup can be considered complete. now the TV will independently search for available channels and store them in memory. If necessary, they can be sorted in the order convenient for the user.

After completing all the settings for digital television, visually check the quality of the transmitted signal. If for some reason the TV channel is not activated. go through all the points again.

Is it possible to watch a number without a prefix

Many modern TVs, in particular those released after 2011, are equipped with a built-in DVB-T2 tuner. In this case, digital channels will be caught without an external set-top box. To understand if there is such an option in a particular TV model, you should refer to the operating instructions. If it is lost, the official website of the company will help, where you can see its specifications by model number.

If the TV does not have this support, you will have to buy an additional set-top box to receive digital TV. It is inexpensive. about 1000 rubles in the basic version, which is suitable for most users.

Read more:  Installing A Fork Of The Player On The Samsung

Digital Channel Tuning Methods on Samsung TVs

Modern high-quality digital television has entered our lives. now almost every home has the latest TVs, many of which are equipped with Smart functions. However, smart technology requires certain handling skills: it can be difficult to understand its settings. Often users ask the question: how to tune digital channels on a Samsung TV. The tuning algorithm depends on the TV model.

Algorithm for manual channel tuning

Manual search is used if the automatic search did not satisfy the user for some reason. For example, not all channels were found.

To carry out the operation manually, press the Menu button on the remote control and go to Settings.

  • Select “Channel”. item Antenna, which we change to Cable.
  • In the “Country” submenu, the system will ask for a PIN-code. enter four digits 0. If it is in the list. put Russia, no. others or Eastern Europe.
  • Next, go to the section cable search parameters. If it is not in the main menu, then you need to search in autotuning.
  • Here you need to enter the frequencies manually. For terrestrial digital TV, you can get them on the website rtrs.ru, choosing your location on the map and the nearest repeater. The frequencies of the cable TV providers should be checked with the operator.
  • After that, we start the search, ticking the boxes “Full” and “Digital channels“. When the automation finishes its actions, then all configured channels will appear. To save, press the OK button.

Change channel list

After searching in automatic mode, all the channels that cable TV has are saved, but the system will show only those that you have selected.

It is very convenient to delete unnecessary channels. From the OSD menu, you need to call the Settings, the Broadcast section. In the item “Channel change”. Here in the list you can check the boxes of unnecessary TV channels and delete them by pressing the Tools button. After the obligatory confirmation of the actions, the channels will be deleted.

You can also move channels. In the same menu item, select the desired channel with a tick, and using the Tools button select the Change item. The channel is moved using the arrows. Finally, click OK.

We have tried to tell you in great detail how to tune digital channels on various Samsung TVs. If the picture quality is mediocre, check that the cable from the antenna is connected correctly or its integrity, this will help improve the TV signal. You can also try choosing a different antenna. For clarity, here’s a video on how to set up digital TV:

Tuning Samsung TV channels using the remote control

In the article below, we’ll take a closer look at how to tune channels on a Samsung TV. Samsung is a reliable manufacturer of quality equipment. However, the correct setting of the receiver requires some knowledge in order to independently configure the reception of HD channels using the control panel.

How to prepare your TV for channel tuning

You can only fine-tune channels on your Samsung TV if the TV and all of its components are connected correctly. For correct installation of the receiver, the operating instructions must be followed. Below is an example of the correct connection of a Samsung 6 series model:

  • For terrestrial or cable TV.
    Antenna is connected to the socket in the ANT receiver through a special cable with a resistance of 75 Ohm. The user will receive an analog signal.
  • For cable or satellite TV, Blu-ray connection, game console or laptop.
    You will need to connect an HDMI cable to the HDMI jack.
  • For online use and software updates.
    Requires a wireless connection using a regular Wi-Fi router. Any of the Samsung SMART models supports Wi-Fi connectivity. For a wired connection, you need to insert an Internet cable into the LAN port on the back of the TV.
  • To watch paid channels.
    It is required to install CI or CI cards. It is necessary to remove the protective film and turn off the TV, place the adapter in the two holes located next to the COMMON INTERFACE port.

Manual search

You can adjust TV channels in this way on older Samsung E-series TVs. To get the channel pool on older receiver models, you need to know how to manually tune channels on your Samsung TV. To do this, you must follow the following sequence of actions:

  • Press “Menu” on the control panel.
  • Go to the “Channel” tab.
  • Select the item “Antenna” and replace it with “Cable”.
  • Go to the “Country” menu item, enter the password “0000”, select “Russia”. If the country is not on the list. “Eastern Europe”.
  • We follow in the section of the parameters of the cable connection. If there is no such item in the main menu, then you can search for it in automatic settings (on some Samsung TVs such settings are set).
  • Going to the cable parameters, you need to set the parameters: start frequency. 298000 KHz, end frequency. 362000 KHz. The rest of the settings do not need to be changed.
  • Open auto-tuning and select the type of received TV channels (digital, analog, satellite).
  • The search engine opens. Set the “Network” parameter, click “Search”. Automatic channel tuning starts.
  • All found channels will be saved in the general list, but the TV will show only those TV channels that the user selects.
  • Unnecessary ones can be deleted by selecting the corresponding items of the drop-down menu.

Automatic search

Setting up digital channels on a Samsung TV is quite simple and does not require any special training. Even an inexperienced user can install equipment and adjust TV channels, spending about 10 minutes on mastering the instructions. Subject to all the rules for installing and debugging the pool of digital TV channels, the image received on the screen will be of high quality.

On modern models, you do not need to press buttons and manually tune TV channels. Setting up Samsung TV channels using the Smart TV remote control will take a couple of minutes with minimal user effort. The new TV series receive the signal through a special tuner plugged into the antenna connector. Auto tuning is done in a few clicks.

How to set up digital channels on Samsung Smart TV

The newest receiver models receive and display the highest quality TV signal. Almost every recent TV has Smart features. However, many people still cannot figure out the Smart TV parameters on their own. Tuning digital channels on a Samsung TV does not require serious skills. any user can handle.

How to adjust TV channels on Smart TV

Press the “Menu” button on the remote control.

  • Select “Broadcast”.
  • Two windows will open sequentially, in each of which you need to select “Auto-tuning”.
  • Click “Start”, select the search mode. “Full”.
  • The program itself will select the available digital channels into a single list.

If at the end of auto tuning, digital TV channels have poor quality or are not displayed at all, you need to check if the equipment is connected correctly and go through all the points from the very beginning.

These methods are universal for setting up a pool of TV channels on Samsung TVs of different versions. If you have any difficulty, contact Samsung service centers for assistance.