The problem has not turned on on your PC. Testing of RAM planks

“An error has arisen on your PC and it must be reloaded” (Windows 10)

Our article will tell you about a critical error when downloading Windows 10. “A problem has arisen on your PC and it must be reloaded”. You will learn about the main reasons for this problem, as well as about all possible ways to solve this problem.

In the Windows 10 operating system, the Microsoft Corporation updated the critical error screen (blue death screen). Now the PC does not go into reboot, a second after demonstrating an error message, and asks the user permission for the corresponding operation and indicates a specific error code. Thanks to this, the PC user can familiarize himself with the cause of the malfunction and even quickly find the method of eliminating the problem.

Reboot PC

If this screen appeared for the first time when working with PC or turning on, then first we recommend waiting for the end of the procedure (progress as a percentage on the screen). Then the computer will restart again. If the problem is associated with minor temporal failures, then the performance of the device will be restored.

After the text in Russian, the state code is indicated, which was usually used to identify the cause when the usual BSOD appears on Windows 7 or the older version of the OS. You can rewrite it and use the search engine. Solutions on part of such errors can be found on our website.

If the failure during Windows 10

In cases where it is possible to enter the entrance, and the flights occur during work, you need to try simpler methods without the risk of losing important information. As a rule, in such situations, the BSOD source may be as follows:

It is logical that to solve the problem it will be necessary to eliminate possible reasons, which means that the procedure will look something like this.

AdWCleaner delete loaders capable of breaking the system

SFC /Scannow is an effective team in Windows 10

In addition, it is advisable to recall when the problem was first discovered. It is likely that the blue screen began to appear after installing or launching any application. In this case, it is necessary to reinstall it, and if the error is saved, then contact the support of the software manufacturer.

If you have completed all cleaning and restoration, and the problem remains, then you need to localize its source. To do this, I advise using a simple BluescreenView utility. Here are a visual instruction for its use and detection of the causes.

The problem arose on your PC due to iron

If the steps described above did not help, then, most likely, the problem in the hardware. In most cases, users cannot start the operating room even in safe mode or reinstall the system. Often the causes of the problem are:

Keep in mind before touching the components, it is advisable to perform checks using the following utilities: “Memtest86” or “HDD Regenerator”.

To start this software, you need to create a boot flash drive. If there were no errors as a result of checking, then the probability that the reason lies in RAM or HDD is extremely small. Be sure to pay attention to the operation of the cooling system and the heating force in the processor.

We check the components as follows.

What kind of error is this?

“A problem has arisen on your PC and it must be reloaded” is a message that the user receives due to critical failures in Windows 10. An error arises for various reasons and can be a single bug or constant problem.

Unlike previous versions of Windows, in the 10-ke on the blue screen, a QR code is also displayed, which includes a direct link to the Microsoft page containing a description of the problem and possible solutions to its solution. Thanks to this, if a person who has encountered a corresponding problem has a modern smartphone, he can quickly learn about the malfunction that has arisen and solve it.

Checking the file system

So, the usual reboot did not help, and the blue screen still appears. If you cannot even download the operating system due to this error, you need to go into safe mode. To do this, when turning on, press F8 and select the appropriate item.

If you select the “Elimination of Computer Criminal Control” items, then the recovery environment will open where you can start the system rollback procedure, diagnosis, open the command line and so on. Use this option if the safe mode refuses to boot.

In ordinary, safe modes and the recovery environment, you can use the command line. With its help, it is necessary to scan the file system. Launch the utility on behalf of the administrator and enter the SFC /Scannow command. Wait for the end of the analysis. Found problems will be eliminated automatically. After that, reboot the PC, but already in normal mode. If the blue screen is associated with problems on the system section, then this procedure should correct the situation.

Automatic recovery only after completion of work, after rebooting Windows 10 works

One of the common options is the preparation of automatic recovery, the diagnosis of the Windows 10 computer and subsequent stages show themselves only after completion of the work when you turn on the computer or laptop, and pressing the “Reloading now” button or a simple reboot solves the problem. The option is also possible when the appearance of the problem depends on how long the computer has been in the off state or whether it turned out from the outlet.

In the above cases, the following solutions to the problem can help:

(the fastest method and necessary if the problem occurs on PC after turning off the outlet, and not turn it off you are not ready).
• Manually install the chipset and power management drivers, and for Intel are also Intel Me (Management Engine Interface) drivers from the official website of the laptop or motherboard, even if they are not the latest on the official website.
• For PC when the Fast Launch function is turned on. do not disconnect the computer from the mains.

The essence in this case boils down to the fact that Windows 10, with the default, “quick start” function and the completion of the work does not turn off “completely”, but goes into a kind of gibernation. If the chipset drivers are incorrectly operating and power control (and there are frequent cases when such incorrect work is caused by the automatically installed Windows 10 drivers, despite their compatibility), as well as with a complete loss of power (for example, turned off the PC out of the outlet), re.restoration from this gibberna can lead to malfunctions and automatic restoration.

Windows 10 stuck on a computer diagnosis

Before starting work on corrections, perform Hard boot. Turn off the computer, remove the battery and alternating current adapter. Connect them again, then press and hold the power button for 20 seconds and see if it will load normally. If this does not help, read on

Then you will have to turn off the computer and upload Windows 10 in safe mode. Then you can make these corrections to derive Windows 10 from a hung screen diagnosis of your PC or preparation for automatic restoration.

• Launch system files and Dism.
• Run Chkdsk.
• Disconnect automatic recovery.
• Use the installation media to download and restore your system.

1] Launch the checking system files and DISM

Launch CMD on behalf of the administrator and then execute the next command to start the systems for checking system files:

Reload the system after scanning completion.

Now, to correct the damaged image of the Windows system using DISM, open the command line (Admin) and enter the next three commands sequentially and one after another and click Enter:

Let these DISM commands start and then reboot the computer and see.

Launch the command line on behalf of the administrator and execute the next command to run Chkdsk. and then click Enter.

He will either start checking errors and correct them, or request a reloading system. Click Y. To plan a disk check for the next restart of the system.

3] Disable automatic recovery

In case of a problem related to the system disc, the automatic recovery window at starting is open automatically during loading. If you think that you are in such a situation, you can disable automatic recovery when downloading. In safe mode, you need to open the command line and execute the next command:

4] Use the installation media to load and restore the system.

You can use Windows loading media to install and restore your system.

• Create a installation media of the same version of the OS installed on the computer.
• When you reach the Windows installation screen, click the link to restore the computer.
• Disconnecting after the repair is completed.
• Then turn on the computer to check if Windows can load correctly.

If this is not so, that is, a few more suggestions that you can look at:

Preparation of automatic recovery Windows 10

Unfortunately, the results of the work of the auto.contamination function are not always positive. Damage or absence of backups themselves and critically important system files, hard disk errors, a lack of space on a system volume can lead to the impossibility of completing the procedure or to fix it. Consider one of these scenarios in which the preparation of automatic recovery in Windows 10 freezes, while the user sees only a black screen with a message about the preparation.

How to fix damage to files and file system

The reason for the “eternal” preparation for restoration may be damage to the disk structure, usually a specific sector in which the file recovery is recorded for the implementation of the file recovery procedure. Checking the file system and the integrity of the system components with the Chkdsk and SFC /Scannow commands could identify and eliminate the problem, but what to do if the preparation of automatic recovery of Windows 10 does not end? There is only one solution here-download a computer from a installation or rescue disk, for example, Winpe 10-8 Sergei Strelec and perform the necessary restoration work.

So, having set the loading from an external medium in the BIOS, download the computer from the installation disk with Windows and when the window of the wizard appears on the screen, click “Next”, and then “Restoration of the System”. After we find ourselves in the Winpe environment, select the search and elimination of malfunctions → Command line. Now you need to find out the letters of the sections, for which the NOTEPAD command immediately in the console, and when the notebook opens, click Ctrl S and determine the letter of the system volume in the conductor window opened. Having received the letter, in this example it is D. Follow the following command:

If errors are found during the audit, the check will need to be repeated, but already using arguments, like this: like this:

After finishing the analysis of the disk and the file system, perform the check for damage to the system files with the following command:

Note: Restoration using the SFC tool can be effective if only the WinsXS component storage remains intact. However, you can connect to the PC of a similar working version of Windows, only for this you will have to unpack the WIM- or ESD-image, copying its contents on a separate flash drive, which will then be connected to a problem computer.

Errors or bugs in update. what to do

If you see a black screen with the text “Preparation of automatic Windows recovery” after the next update, most likely, the problem is caused precisely by installing the update. In this case, the update must be removed using the same loading disk. By loading a computer from it and going on the recovery environment as shown above, go to the search and elimination section → Delete updates and select one of two options:

• Delete the last correction. This is usually a patch produced by Microsoft to solve a specific problem.
• Delete the last update. This option should be chosen if you want to cancel the previous major update.

Upon completion of the update removal, we load the computer in the usual mode and watch how Windows behaves.

Correct the register damage and other errors

If there is a suspicion that the procedure has stopped at the stage of preparation for automated recovery due to damage to the registry, try to carry out the rollback to the recovery point, choosing a system of OS in the boot environment menu and follow the instructions of the master. However, this method does not guarantee success if the shadow copies themselves are damaged by the damaged. In rare cases, an error may indicate a problem with the bootloader, it can be excluded by selecting “Restoration” in the loading environment menu during the loading environment menu.

Restoring the system from the image

It is believed that the best option for restoring the system’s performance after a message is issued that the computer is launched incorrectly (Windows 10 is used or any other version) is the restoration of the previously recorded image of the system.

Not everyone, however, think about such things in advance, however, the process of bringing Windows in this case in this case is the fastest and simple.

Checking the file system

So, the usual reboot did not help, and the blue screen still appears. If you cannot even download the operating system due to this error, you need to go into safe mode. To do this, when turning on, press [KNOPKA] F8 [/KNOPKA] and select the appropriate item.

If you select the “Elimination of Computer Criminal Control” items, then the recovery environment will open where you can start the system rollback procedure, diagnosis, open the command line and so on. Use this option if the safe mode refuses to boot.

In ordinary, safe modes and the recovery environment, you can use the command line. With its help, it is necessary to scan the file system. Launch the utility on behalf of the administrator and enter the command [Knopka] SFC /Scannow [ /KNOPKA]. Wait for the end of the analysis. Found problems will be eliminated automatically. After that, reboot the PC, but already in normal mode. If the blue screen is associated with problems on the system section, then this procedure should correct the situation.

Verification of antivirus software

The next step is to remove malicious. Viruses in the form of files or programs can cause damage to the operating system and personal data of the user. Perhaps, after their activities, Windows will still have to be restored, but first you need to remove the threat. Therefore, first scan the entire computer using your standard antivirus. If you do not use protective software, then install one of the free programs (Kaspersky Free, 360 Total Security and the like).

Then you should check the computer using an autonomous utility to remove threats that the antivirus is not able to detect. Dr.Web Cureit!, AdWCleaner and similar applications will help you eliminate the remaining viruses from the hard drive.

Web programming specialist and computer systems. PHP/HTML/CSS editor OS-Shelper.ru.

Do not forget to open the “Device Manager” and check the equipment. There should be no unidentified devices or positions with an exclamation mark in the list of devices. Also turn off the entire periphery and try to start the PC again.

What kind of error is this?

“The problem has arisen on your PC and it must be reloaded”

Unlike previous versions of Windows, in the 10-ke on the blue screen, a QR code is also displayed, which includes a direct link to the Microsoft page containing a description of the problem and possible solutions to its solution. Thanks to this, if a person who has encountered a corresponding problem has a modern smartphone, he can quickly learn about the malfunction that has arisen and solve it.

Scenario 2: The computer is launched incorrectly

If there is a blue screen error “A problem arose on your PC and it must be reloaded”, and after it there is a reboot and a message appears to restore “Your computer is launched”, then the script for you.

Когда появляется окно автоматического восстановления, то нажмите на кнопку «Дополнительные параметры«, чтобы попасть в них.

In additional parameters, you will have the opportunity to “delete updates” if the blue screen began to appear after updating Windows 10. By choosing “restoration at loading”, the PE environment will correct errors in the boot sector if they are. You can also click on the “system restoration” and select a point a couple of days/hours ago, which will allow you to roll back the system to working condition. In addition, you can start commanding the line to fix the sectors on the disk, check RAM and system files, as described in script 1 (2.3.4).

What causes this error?

If you asked me what causes this mistake, I would ask: “Sorry. I dont know”. But please do not disappoint. You can still probably fix this one of the methods described in this publication.

This is actually a common blue screen error. When your computer cannot work properly due to some problems, Windows continues to fail and you get a blue screen. Blue screen errors can be caused by many problems. But most of them have the same reasons.

According to Microsoft, 70 percent of the blue screen errors are caused by a third.party driver code. and 10 percent are caused by problems with equipment. Below you will learn about methods that eliminate the most common causes.

In addition to the message “your computer has a problem, you need to be rebooted”, you can also see a message error message on the screen, such as Driver_irql_not_less_or_equal, Bad Pool Header. At the bottom of the article, you can find the relevant articles on the correction of specific codes of the stop-losit.

What kind of error is this?

“A problem has arisen on your PC and it must be reloaded” is a message that the user receives due to critical failures in Windows 10. An error arises for various reasons and can be a single bug or constant problem.

Unlike previous versions of Windows, in the 10-ke on the blue screen, a QR code is also displayed, which includes a direct link to the Microsoft page containing a description of the problem and possible solutions to its solution. Thanks to this, if a person who has encountered a corresponding problem has a modern smartphone, he can quickly learn about the malfunction that has arisen and solve it.

How to fix the problem

In most cases, a simple reboot of the computer helps to get rid of the blue screen of death. It can be performed in several ways:

• click on the “Reset” button on the system unit (suitable for desktops);
• A hard way. pull out the cord (for desktops);
• hold for 3-5 seconds Power button (for desktops and laptops);
• A hard way. remove the battery (for laptops).

If the system has successfully loaded and after the day of using a critical error no longer appeared, then most likely it was an isolated case and no other measures need to be taken.

What to do if the blue death screen occurs again

The causes of a critical error “There is a problem on your PC” can be a lot. Its appearance may be associated with both technical malfunctions of iron and the software part of the OS.

If you have errors like “Critical Process Died” (a failure in the work important for the functioning of the Service system) or “Kernel_Security_check_filure” (error for checking the safety/integrity of the OSC), then fix them in most cases is easy. These are the two most common bugs.

For this, first of all, you should check the system with antivirus. You can use the built.in Windows 10 or install another, but after disconnecting the first.

Step two: run the recovery of the system to the last points. To return the OS to an earlier state:

• click on “wins”;
• enter the “recovery of the system” and launch the application;
• follow the instructions that the program will offer;
• From the table, choose a date for which there were no errors.

The problem has arisen on your PC and it must be reloaded: causes and solutions

If when starting a computer on your screen, a BSOD arose (blue death screen) with a message that a problem has arisen on your PC, and it must be reloaded, this indicates that the system to prevent data loss due to failure.Libo component carried out an emergency reboot or shutdown. However, this is not a reason to worry. Sometimes such an error is the result of a one.time system failure and after rebooting you can continue to work. But if BSOD occurs often, then you need to solve the problem.

The causes of the error on your PC have a problem and it must be reloaded

The blue death screen with the message that “a problem has arisen on PC and it must be reloaded” may appear for the following reasons:

These are not the only reasons why this BSOD may appear, and therefore it is worth performing a full diagnosis of PC.

Methods of correcting error when a problem arose on the PC and it needs to be reloaded

Before solving this problem, it is worth noting that there are several options for the development of the problem:

First of all, you need to try to launch PC in safe mode. To do this, while loading the system, you need to press the F8 and choose a launch with command line support or with access to the network. If the PC loads the desktop, then press the start button, clamp the Shift key and click on the keyboard “Turning off” and “reboot”.

When using the last option on Windows 10, you will get on the screen of additional parameters. Here you need to choose the right option.

If in a safe mode the system loaded without BSODA, then you need to try updating the drivers, turn off the antivirus and check the system for the presence of malicious.

IMPORTANT! If you updated the driver of the driver before the appearance of the BSOD or installed a program that has access to the software, it is worth rolling the drivers and delete software.

If this action did not help get rid of the error, then you need to try to check Windows 10 for the integrity of system files. To do this, run the command line with the rights of the administrator and enter SFC /Scannow.

If the system has discovered violations, then the utility will correct them, if not, then it is worth starting the recovery of the system. To do this, click “Winr” and introduce “rstrui.exe “.

If after the system rollback the problem has not disappeared, then you need to start software diagnostics.

RAM check can be performed using the Windows standard utility. However, it is little effective. We recommend downloading and starting the Memtest86 program, which after rebooting PC will scan the RAM for errors.

If everything is in order with RAM, then make sure that the antivirus does not block system files and install all updates for your version of Windows 10.