The phone sees headphones but they do not work

The headphone icon on the phone appeared and the speakers do not work. How to remove?

[/HMenu] The headphone icon burns on the phone, but they are not connected? You are not alone, people are faced with this “glitch” quite often. What to do if the phone shows the headset. Consider the common causes of failure. Let’s find out how to remove the headphone icon from the smartphone screen.

• One of the most common reasons is the fall. The blow can lead to a malfunction of the smartphone, which will negatively affect the work of the device.
• The penetration of moisture. If you hit the rain or accidentally spilled liquid. Moisture can also get inside the phone if there is a sharp drop in temperature. For example, the user moved from the cold to heat, a condensate formed on the phone, which could get inside the device, creating various problems.
• Pollution of a standard 3.5 mm connector. For example, dust or dirt was the cause of contact contamination.
• Incorrect extraction of headphones from the nest. In this case, the smartphone can sometimes consider that the headphones are inserted and connected to the phone.

Mechanical problem

If you are in the rain and after turning off the headphones from the network, you still see an annoying icon. The moisture in the connector is to blame. Drops can get deep into the phone and cause a rather serious malfunction. Therefore, when it pours, always put a smartphone in a or a bag with a zipper.The second common case. Dust or extraneous small objects. Baby Bukhankaa, pets wool, dirt, sand. All this falls into the connector, sometimes completely blocking the contact of the cable.Dropped the phone on a hard surface? The consequences are not always due to a cracked screen. The inside of the device is easily damaged, and the connectors can simply stop responding to connected devices.

Software error

• Holding the pressure button pressed, remove the headset plug from the nest;
• Insert and remove the plug several times;
• Reload the device.

The reasons for the malfunction of the headset

When failing of a pair of headphones, the cause may be not only damage in the device itself, but also in the phone. To check this factor, you need to connect the headset to another source. If playing is absent, then the problem with the mobile. Also, if the headphones are not intended for various models, they may simply not coincide with the mobile device connector.

This applies more to old models, since the new Androids and iPhones are more universal, and one pair is suitable for the entire series of phones.

So, if the headphones work from another medium, then the problem with the sound source. The most common reasons are:

• The microcircuit or board is disturbed. Damage can be caused by the fall of the phone from heights;
• The mobile may “not see” the headphones due to the failure of the software;
• Getting into a moisture device;
• The problem of settings in the phone.

Когда звук есть, но он частичный или с помехами, проблема однозначно с гарнитурой. So, only the left or only the right headphone can work. Reproduction can be carried out with impaired collapse of the channels, or there is an extraneous noise and crack. All these factors are usually caused by the following moments:

• The cord is often confused, so there is a high probability of damage;
• The liner grid was clogged;
• The connector was damaged or greatly shook, so there is no contact with the mobile phone.

If there are no mechanical damage, the cause of non.Working headphones may be a marriage in an accessory.

If nothing helped

Situations may arise when none of the above reasons do not work. If nothing helped, then it is worth taking the following steps:

• Try contacting the service where they accept headphones or their checks. If nothing was identified in it, then the problem is most likely in the phone itself;
• You can try to reflash the phone or restore it to factory settings. This hard option works well in rare cases;
• Contact the technical support of the company’s headphones. They can help, as they know their goods better;
• Turn to the store so that the headphones are changed there to a more correct copy.

These steps are the last chance to reanimate headphones and connect them to the phone.

Consider the main questions and answers to them for malfunctions with headphones.

For several years he worked in mobile salons of two large operators. I understand the tariffs well and see all the pitfalls. I love gadgets, especially on Android.

Yes, be sure. The coupon is issued immediately after the purchase of headphones. If the reason is really incorrect work, and not in others, such as an accidental fall, then the store should either return the money for the goods or change it.

Yes, this is possible if the headphone is inserted incorrectly. Magnetic headphones, for example, work only with proper wear. To carry the headset correctly, you need to read the attached instructions.

Yes, there may be an inappropriate version or a clogged memory. Because of these reasons, the headset may not connect at all.

Why wired headphones are not connected to the phone?

In the case of wired devices, the situation changes greatly, since the method of transmitting the signal is different, therefore, the problems differ. Conditionally, they can be divided into 2 categories: software and physical. We will consider both niches separately.

Problems in the work on

Napes are not often connected to the phone due to a software failure. Application conflict, system errors, firmware bugs, applications do not work. All this can lead to the problem with sound. Mostly the problem is eliminated on its own after replacing the application, resetting or flashing the gadget.

What to do if the phone does not see the headphones through the fault of the software part:

• We check the application permits. There are 2 potential culprits: the required privileges were not issued to the audiopreter or they were received by the application that blocks the sound. You should go into the settings of the device and in the section with permissions to see what programs have access to sound management. If there is no player among them, here is the answer to the question. Headphones are determined, but the sound is not transmitted to them.
• We delete temporary files, viruses and change the audiopleor. Initially, it is worth starting CCleaner, which will delete the cache and temporary applications data. Then we can use the free Avast antivirus to clean the system from viruses. Finally, install another Android media player from Google Play.

• We reset the settings of the gadget, this leads to the complete deletion of all user data (except those that are in the memory of flash drives). The smartphone acquires the same state as when the first turned on. You need to go to the recovery mode (clamp the volume and lock button with the phone disconnected). Here you need to select the Hard Reset item.
• Reveal android. This is the last possibility of correction in this angle, which we do not describe in detail here.

Hardware failure

Typically, such problems are difficult to fix, since the case is in the physical condition of the phone or components. Quite often, the phone refuses to connect to headphones due to careless use of a smartphone. Falls, moisture, frequent use of the gadget with dirty hands. All this falls under negligence. The only case when it is possible to quickly and simply restore the performance of the port. It was polluted. An ordinary cotton wool, a needle or a match remove the accumulated garbage well.

Other reasons why the headphones do not work on the phone:

• The headset is incompatible with the phone. Part manufacturers go along the shadow path to increasing sales of their own accessories. They simply change the plus contact and mass. This leads to the fact that only branded headphones work on the smartphone. In this option, most headphones from AliExpress and other stores do not work.
• There is no contact in the port of 3.5 mm. Dirt, dust, sorinka, fragment of wood, glass, etc. Can prevent contact. P. Worst of all, if the problem is caused by water, because this can lead to malfunctions of other components of the smartphone. Can also cause banal damage to the nest. Cleaning, recovery of contacts or port replacement should help.
• Audio.Codes flew away. This is a small microcircuit that converts an analog into a digital signal, and also does the same in the opposite direction. You can check the problem of microcircuits by the fact that not only headphones cease to work, but also: speakers, microphone, communication. If the problem appeared after the fall, most likely the case is in the audio codec.
• Damage to the headset. Often disappears the contact of the wire near the plug. Interruption, severe bend, pressure on the cable can lead to breakdown. You have to change the cord or buy new headphones, at least it is better than repairing the phone.

Wired models

Versed in the reasons why the phone does not see the headphones, it is worth noting that the wires are the most vulnerable place of the headset, because they are subject to constant friction and kink.

However, a problem may lurk in another place:

• It is better to start with the inspection of contacts and audio deposits: due to dirt and oxidation, the sound can be transmitted with interference or not at all to work. To clean contacts, cotton wheels and/or sticks are used, you can moisten them with alcohol; Pets are used less often. You must be careful not to damage the connector and the plug.
• An audio slot of a smartphone can also be faulty, an indirect sign of the problem should be considered a bad fixation of the plug in the nest of the smartphone. Unfortunately, such a malfunction requires repair.
• Check compatibility. The usual audio stroke (mini-jack) is 2.3 and 4-pin, and some smartphones do not see 3 and 4-pin mini-jackies.
• Also, do not forget about the wires. The bare or broken wire may cause why the phone stopped seeing the headphones. As a rule, in this case, they replace part of the wire with a plug using a donor. A wire bought in a store or other working headphones (headset).

But what to do if the phone does not see the headphones even after cleaning the contacts, and the connector and the wires are serviceable? In this case, the problem, most likely, in the microphone, and the audio device will have to be given for repairs or find it a replacement.

Possible reasons

The simplest thing that can be done if the phone does not see Bluetooth headphones is to see if the function of wireless communication is included on the smartphone. If everything works, but the headset still does not connect. Then look for reasons in the technical problems of both devices.

So what to do if Bluetooth headphones are not connected to the phone, how to solve this problem and why it arises? There is an answer!

The synchronization function is turned off automatically if the headset was associated with another smartphone before. For a new connection, hold the turnover button for 10-15 seconds on the headset until the indicator freezes. After that, the problems with the conjugation should not arise.

The same procedure will help when Bluetooth headphones do not connect to the smartphone automatically. In some models of wireless sets, in order to maintain the battery charge, the mating function is constantly disabled.

Now let’s tell you what to do if the phone does not find Bluetooth headphones. In mobile devices, the visibility time of the device may be limited. Here’s how to check it:

Problems in the smartphone

In the case of problems with the gadget after connecting the device to it, the sound is not played and at the same time the icon of connected modules does not appear on the screen. The reason for this may be:

• Contamination and oxidation of contacts in the connector, because of which the system does not recognize the headphones.
• Short circuit.
• Damage to the train.
• The problem with the audio coat.

Blind a flashlight in the port: it can be clogged with dirt, to remove which you need a toothpick or a spray can of compressed air. The latest product will be more effective, given that it usually has a thin tube that allows it to dull dust from hard.To.Reach places.

Such purification eliminates damage to the connector. Well, if there is no spray can, you need to use wooden products, since steel can damage contacts, although they can be dangerous, but to a much lesser extent.

In the case of a breakdown of a loop or port, it is better to contact a service center for replacing parts. If there are clogs and oxidations, try to clean them yourself using a cotton wool slightly moistened with alcohol. Do it extremely carefully so as not to damage the details.

In addition, the case may be in audio codes. This device is a small microcircuit that converts an analog into a digital signal. If it has a defect, then headphones cease to function, as well as a speaker and a microphone. The failure of such a component can occur after a smartphone falling.

Honor phone does not see a wireless headset

In the case of wireless gadgets, software problems more often occur, mainly with the connection. Follow the following points if the Honor phone does not see the headphones:

• Charge all the devices. Sometimes, due to wear of batteries, they discharge faster than they should, and do not get together with the phone.
• Reload both devices.
• Check if the headset is enabled. Usually there is a power button on it, which is responsible simultaneously for the conjugation.
• Check for Bluetooth to work on a smartphone.
• What to do if Honor still does not see headphones? You need to bring the gadgets as close as possible.
• Release the conjugation between the Honor and the headset.
• Go to Bluetooth on a smartphone, find the device and “forget it”. Now make a connection again.
• Sometimes it happens that Bluetooth versions on gadgets are incompatible, so Honor does not see the headset. This should not be, because the versions are backwardly compatible. But periodically such a rare problem arises.

If all these actions did not help to connect the devices, then why are the headphones not connected to the Honor phone? Most likely, there is a breakdown. If you check your device, and it turns out that it works regularly with another smartphone, then the case is in Honor. In another case, you will have to replace the headset.

Now you know what to do if the Honor phone does not find headphones, and does not see them, they are wired or wireless. You can solve this problem. If the headset is faulty, and it needs to be repaired, then this usually does not have a crash from a financial point of view. Better to buy new ones. But in other cases you can restore their work.