The microphone does not work on the iPhone when calling
Iphone Microphone Not Working Fix
What to do if the microphone does not work on the iPhone: simple tips to solve
We recently told what to do if there are problems with the microphone on the smartphone with Android. Today we will talk about similar failures on the iPhone, because this also happens.
If for some reason the interlocutor hears you interruptions or does not hear at all, the recorded videos and audio have poor sound quality, then this means that there are problems with the microphone. Below we will talk how to fix them without looking at the service or closest Apple store. Although sometimes problems can be hardware, let’s first analyze software options.
The latest models such as the iPhone 11, 11 Pro, 11 Pro Max, X, XS Max, XR, 8 and 8Plus are equipped with three microphones. One at the top, one behind and the third below. To check the front and rear microphone, just write down two quick videos using a selfie camera and the main camera, and then listen to the recorded sound.
How to fix iPhone Microphone, No body can hear me on call
To check the lower microphone, open the Voice Memo application on the iPhone and write down the voice note. Play the record and check the sound quality. If the voice is fading or cracking, then the microphone needs to be checked and, possibly, repaired.
The most classic situation. The lattice collected dust and dirt, after which the microphone stopped working normally. You can clean it with a toothbrush or blow it with compressed air. However, in both cases you must be careful. The brush should not be too hard, and the air flow. Excessively strong. This can damage the microphone and the insides of the iPhone.
Bluetooth wireless headphones can be connected by iPhone. Some models do this when they are put on the charging station, which is why the call can automatically redirect to the headset, and not to the speakers and iPhone microphone. The same is true if the device is connected by the information and entertainment system of the car.
In such cases, it is always recommended to manually disconnect the Bluetooth device from the iPhone from the control center.
Another typical problem is cheap or low.Quality covers that simply close the microphone in whole or in part. The solution is simple. Remove the cover and check the sound quality.
IOS by default includes noise reduction to reduce the surrounding background noise with phone calls. Although this works great in most scenarios, the function can ultimately drown out the user’s voice.
To turn off you need to go to the settings special features of audio/video. There you need to turn off the noise.
If the problem is not solved, we move on to the next point.
If there are problems with video calls in applications such as Facetime, Skype or WhatsApp, then you need to check the presence of permits for them. Most likely, the resolution on the microphone for these applications is disabled.
You need to go into the confidentiality of the microphone in the settings. There you need to check which applications have access to the microphone and which ones do not.
For the iPhone X and more new models, this is done as follows:
- Quickly press the volume button and release;
- Quickly press the volume reduction button and release;
- Press and hold the side button;
- On the screen will appear “Spend to turn off”. You need to run a finger without releasing the side button until the Apple logo appears.
For models of the iPhone 8 or more old, the algorithm is as follows:
- Press and hold the Lock/Wake button on the right side of the iPhone;
- Simultaneously press and hold the volume reduction button on the left side
- Hold both buttons until the screen becomes black, and then turns on again and shows the Apple logo.
It is important to note that a hard discharge does not erase the data
If the iPhone microphone still does not work properly after all the steps described above, then you will have to drop the iPhone back to the factory settings. Go to the iPhone settings application, then to the General Reset section and select “Reset all the settings”.
At the moment it is iOS 13.5. Perhaps this will solve problems.
Go to the iPhone settings General software update and download the latest IOS version to your device.
If none of this helped, most likely the microphone is physically broken. The cause may be water, violation of electrical contact, dust and many others. But this is already being decided only in the service.
How to eliminate iPhone 7 problems with its microphone, which has stopped working
Before eliminating the iPhone 7 problems, check and make sure that the microphone is clean. If necessary, clean the microphones with a dry and unused toothbrush to clean the microphone grille in the lower part of your iPhone. Also, if necessary, clean a small black microphone located next to the camera facing. Just put on a toothbrush on microphones. This will lead to the removal of any stuck dirt, pile and dust. In addition, you can clean microphones with compressed air. Just gently spray them away from microphones so as not to damage them. After cleaning, check each microphone to make sure that it works. If not, then continue and eliminate the problems with these step.By.Step guides.
If you have not done this yet, you should restart the iPhone or perform a software reset to update the operating system and clean all minor failures in the internal memory that could cause the problem. This will not lead to the removal of any data and personal information that you saved in the internal storage of your phone, so there is no need to create backup copies. After you configure everything, perform the following actions for soft discharge or rebooting iPhone 7:
- Press and hold the power button for a few seconds until the Slide to Power Off command appears.
- Drag the slider to completely turn off the iPhone. Leave it for 30-1 minutes.
- After the specified time, click and hold the power button until the Apple logo appears.
Read: how to fix your iPhone 7, which cannot access the Internet, but is connected to Wi-Fi (simple steps)
After rebooting, test the microphones on your iPhone 7. You can start work with both front and rear microphones. To do this, try to shoot two videos, one using the front camera, and the other from the rear camera, and then play. If you hear the sound in the video, then the microphone works.
After testing the front and rear microphones, check the lower microphone. To do this, open the “Voice Notes” application, and then press a large red button in the center of the screen to record a new note, and then play it. If you hear the sound from the recorded note, then the lower microphone works. If the microphone check is not passed or you can’t hear the sound from the video you recorded, continue and try the following applicable solutions.
First solution: reboot your iPhone (software reset).
Minor software malfunctions due to the update, due to which the functions of the audio / microphone of your iPhone became somewhat unstable, are usually associated with the software reset or rebooting the device. Therefore, if you have not yet rebooted your iPhone, do this with the following steps:
- Press and hold the power button for a few seconds until the “slide in the off state” hint appears.
- Drag the slider to completely turn off the iPhone.
- After 30 seconds, press and hold the power button until the Apple logo appears.
Wait until your iPhone boots, then try to check the microphone again. Data is not affected in the process, so everything remains untouched.
Iphone microphone does not work. Correction: Disconnect Bluetooth.
If you accidentally have a pair of Bluetooth headphones, such as AirPods actively used with the iPhone, headphones will act as a microphone, and not a built.In microphone in the iPhone. So make sure your wireless headphones are currently not active by turning off Bluetooth.
- Open the settings.
- Click Bluetooth.
- Set the Bluetooth switch to Off (White) position.
If you do not have experience in repair, to eliminate the consequences of mechanical damage and water from water, contact specialists. If it is a matter of pollution of the soundproof or in malfunctions, you can try to cope with bugs and yourself.
Where are the microphones on the iPhone
On iPhones, several microphones are installed at once, which perform a different function:
- Basic. Located at the end of the smartphone from below. In case of its malfunction, the interlocutor does not hear you or hears badly. In addition, the record of the recorder does not work, since it is through this microphone that sound is recorded.
- Upper. Located next to the front camera under the net, in the same place as the speaker. When it breaks down, there is no sound when recording a video on the front camera. This microphone is also used by applications. Therefore, the voice assistant siri may not work.
- Upper rear. As it is not difficult to guess, is located near the back camera. Accordingly, in case of failure, there is no sound when recording a video on the main camera. In addition, this microphone is responsible for noise reduction during the conversation. Therefore, one of the indicators of his failure is the appearance of noise during the conversation that the interlocutor hears.
You can restore your iPhone to factory settings via iTunes. You will need a computer to make this method, as well as a good connection with the Internet. Here are a few steps:
- Make sure your latest ITUNES version has been installed.
- Connect the iPhone to Mac/PC.
- Launch iTunes.
- Click Restore the iPhone in the Consolidated panel.
- Click the restoration button to confirm your action.
- Wait for the process to be completed.
These problems of problems are effective on iPhone 4, iPhone 4s, iPhone 5, iPhone 5 C, iPhone 5s, iPhone 6, iPhone 6 plus, iPhone 6s and 6s Plus, iPhone Se, iPhone 7 and iPhone 7 plus.
If the iPhone does not have a microphone, even if you have tried all the decisions that we have listed above, contact Apple or visit one of the stores.
Replacing the lower loop of the device
None of the generally accepted methods of correction helped and the microphone on the iPhone still does not work? Then, with a probability of 99%, we can say that your phone no longer works or works incorrectly the lower train, the microphone module.
Before starting the repair, it is necessary to select a flat and clean surface on which the device will be versed. Turn off the smartphone. Now make sure that all the necessary tools are available: a suction cup for a case, tweezers, a screwdriver, a plastic blade, a new lower train.
Open the phone case. Two screws are located at the end of the end. Unscrew them. Now you need to place the suction cup below on the display. Take the phone in the hand and, holding the upper part of the screen, pull the sucker to open the case. Using the shoulder blade, Paturate the right and left edges and open the back cover.
Place the display and the back cover at an angle of 90 degrees without disconnecting them. Then we unscrew 4 screws that hold the plug of the motherboard.
Remove the protective panel and disconnect all 4 trains from the board using the shoulder blade.
Now disconnect the panel indicated in the figure:
Eliminate the battery holder and remove the device battery. We unscrew the plug:
Unwind the next 7 screws in the lower part of the case and remove the lower train: