Sound doesn’t work on iPad

No sound on iPad: what to do?

Sound problems. a common problem even among iOS users. What to do if audio goes missing on iPad? Often this situation can arise as a result of some kind of software failure.

Fix Speaker Problem on iPad Pro (6 Ways) | iPad No Sound Problem Solved

In addition, it is quite possible that there is no sound due to the carelessness of the owner of the device.

Common causes of the problem

sound, doesn, work, ipad

If sound does not work on our iOS tablet in any of the applications, you should first check the volume level.

  • In the event that the problem persists, and we recently updated the system, it is highly likely that this new firmware was the cause of the problems.
  • Sometimes the problem may even lie in the automatic screen rotation lock button. It’s worth taking a closer look at this side switch. If the red light is on, it means there is no sound in the whole system.
  • Another common cause of problems is software failure. It is recommended to check the default settings. So, in the “Music” menu there is an option that is responsible for setting the limits of the sound level.

It is possible that such a restriction just needs to be removed.

  • Sometimes the mode may be set to monaural. Disable the latter through the “Universal Access” in the basic settings of the tablet.
  • If you have not yet managed to understand the cause of the problems, you should perform a regular reboot of the device. We press the on-off button and “Home” at the same time.
  • A more radical way is to roll back the tablet settings to the factory state. You can reset them through the menu. It should be borne in mind that returning to the factory state means not only resetting all settings, but also deleting important data.
  • It is recommended that you take care of backing up your information in advance.

    A simple solution

    If we try to listen to music through headphones, but after removing them, the sound from the speakers disappears, you should do the following:.

    iPad Sound And Microphone Problem And Fix, How To Fix Audio Issue on iPhone or iPad

    • We turn on the playback of any audio file in headphones.
    • Now we hold down the volume switch in the direction of increasing and at the same time remove the headphone plug.
    • After that, the sound should become louder. By the way, sometimes problems also arise due to blockages and moisture ingress.
    • It is recommended to inspect the speaker grilles for contamination.

    If the problem has not been fixed, it is possible that the failure is not software, but of a different nature. Out of the unpleasant: the speaker may fail, the board may be damaged, and so on.

    In this case, it is worth contacting the service center with the tablet. And even more so, do not hesitate with this if the sound disappeared after falling or getting liquid on the surface of the gadget.

    System crash

    Sound problems can occur due to a recent system update or a system crash. In this case, you need to restart the device by holding the “Power” button for a long time.

    If this does not help, you can resort to a more radical method: restore iPad with a full reset, but before that, be sure to create a new backup so as not to lose important data. Read about how to do this in our articles.

    Sound problems. changing settings

    Of course, there are situations when the sound on the iPad has disappeared. This happens suddenly, and, as users themselves observe, there is nothing to be done about it: the volume rocker does not help to return the previous level.

    In such a situation, the main thing is not to panic. First of all, you need to configure the iPad, for this you need to go to the corresponding menu tab. There is an item “Basic” (meaning settings), in this submenu we find the checkbox “Mute”. This item was created in order to block any sounds from your computer in the right situations. Accordingly, it can be the reason for the absence of sound.

    Checking the headphones

    Of course, the described techniques cannot be a panacea and the only solution for all possible situations. Each device is unique, including your iPad. Photos of all models are the same, it’s true, but all tablets are used in different ways and with different intensities.

    Therefore, in order to say specifically what is the reason for the lack of sound from you, you need to carry out a mini-diagnosis of your gadget. precisely, it is necessary to determine when there is no sound on the device, as well as whether melodies are played in the headphones.

    The thing is that the iPad can make sounds thanks to the speakers, while the headset, which connects to the tablet with wires, itself plays the role of those very devices that play music. If there is sound in the headphones, then the problem may be in the speakers.

    Switch position

    On some iPad models, there is a switch on the side panel that allows you to lock the device from changing orientation and put it in silent mode. The user should check that the position of the switch is as shown in the image below.

    Sound does not work on iPad what to do

    Watching movies, listening to music and even banal message notifications in various messengers are accompanied by special sound effects, including calls from other people. But what to do if suddenly all sounds disappeared on iPad?

    Why did I lose sound on iPad

    Before contacting the specialists in the service center, the user can try to restore the sound on the iPad himself. Below are the main causes of this problem, as well as how to solve it. We recommend starting with the first one and going through the list until the sound reappears.

    The first thing that is recommended to do if the sound is lost is to open the device settings and go to the “Sounds” section, where you can set the desired speaker volume. Try also to change the volume with special buttons on the case.

    Sound doesn‘t work on iPad. What to do?

    Sound problems Sound is not working on iPad. What to do? Both tablets and smartphones are the most common. Only 30% of breakdowns occur due to a software glitch or malfunction. The reason for the remaining 70%. damage in the speaker itself For readers who have encountered a similar problem below, we provide a list of actions that will help fix the problem on your iPad.

    Sound disappeared on iPad, typical reasons

    There may be several reasons for this problem on your gadget:

    • Malfunctions in the dynamics itself;
    • Liquid entering the body;
    • Mechanical damage caused by impact
    • The firmware has flown;
    • Plug in the ear canal;
    • Inoperative system board.
    • Speaker issues on iPad causing audio to drop out

    Since the sound on any device is reproduced through the speaker, first of all, it is necessary to check it. If you have come to the conclusion that the root of the problem lies precisely in the dynamics, you should not be upset prematurely and “bury” your device. You can get it repaired at your nearest Apple service center.

    In the iPad, a separate microcircuit is responsible for the sound. If it is deformed by impact or flooded with liquid, the sound may disappear. This problem is eliminated, as well as the previous one in the service center.

    In the event that there is no sound on the device in running applications, this problem may be caused by a failure in the firmware, it is also worth making sure that the volume in the options of the application itself is not at a minimum.

    It happens that the damage has touched the printed circuit board. Perhaps this reason is the most deplorable, because it can be determined only with a full diagnosis of your iPad.

    When the sound on your device has not completely disappeared, but simply sounds very quiet at maximum settings, this means that your device has a clogged ear canal. Cleaning it will bring back the volume and sound quality.

    Tips from the professionals of the service NOUT-911

    Turning to the service center for advice, we received several important parting words about “what to do. when the sound does not work on the iPad ”and the ability to reduce the cost of iPad repair:

    In a situation where you spill any liquid on your gadget, you must first turn it off and wipe it dry, in no case connect the iPad to the charger. Use the services of the service center as soon as possible; 2. If, as a result of a fall on the tablet, the sound from the speaker disappeared, but it still works in the headphones, this is a sign of mechanical damage, which can only be dealt with by specialists.

    Bring back iPad sound with your own hands

    If you do not find similarities with yours in the above symptoms and causes of the problem, you can fix the iPad yourself. To do this, follow the instructions:

    We check the software, if the version is outdated, update the firmware; 2. It is necessary to check the volume control buttons; 3. We check the side switch, by default it serves as a “lever” to lock the screen rotation, but when configured, it can also put the iPad in silent mode.

    If it is in such a position that you see a red dot, then most likely the device is simply muted.

    Trying to fix the problem ourselves

    If there is no sound on iPad 1, 2, 3, 4. restart the device. Such a simple manipulation often restores the functionality of applications and eliminates the breakdown.

    • disable “Mute”: the function can block the sound playback;
    • change the position of the side switch. it not only turns off the “Auto-rotate screen”, but also does not play sound on the iPad when the red dot is visible;
    • connect “Volume Limit”. this can be done in the settings in the “General” section;
    • deactivate “Mono Audio”.
    • reset all settings. one of the options to help restore sound in the device if the problem arose after downloading the update.

    If the above manipulations did not change the situation and there is still no audibility on the tablet, then the correct decision would be to contact the SC.

    Note. When trying to fix the problem on your own, as a rule, the situation only gets worse. In the future, this complicates the repair and makes it more expensive.

    No sound in video

    A common problem if you watch movies in a non-native format. It is connected with the lack of support for some codecs. Play a video on iPad that was shot on the same tablet for verification. This must be done on a standard player. If there is sound in it, but not in the downloaded movie, then these are, for sure, codecs. The solution may be to download another player, format converter, download a codec pack into an already installed player.

    Check the mute button

    Earlier iPad versions have an extra button just above the volume key. This button is for turning off the sound. Switch it to a different position and check the sound on iPad.

    You can also check your tablet settings to make sure that you have not activated the option due to which the sound on the iPad does not work. To do this, go to the menu “Settings” “General” “Switch on the side panel” “Mute”.

    If this option is selected on your iPad, then the button above the volume key is responsible for mute. You can select the “Orientation Lock” option so that the button does not mute, but flips the screen.

    If the sound is quiet through the headphones

    You may have volume limiting enabled:

    If the slider does not work, then you have the restriction enabled:

    Settings-General-Restrictions-Volume Limitations. You need to put on “Allow changes”.

    If the entrance is clogged

    As I said before, if you like to carry your iPhone in your pants or if you are a girl, then the entrance of your phone can be clogged with small particles of debris in your purse. I already had this. To check if this is the case, follow these steps:

    • Bring your gadget up to a light and check all the inputs to see if they are clogged.
    • If the entrances are clogged, try cleaning them gently with a paper clip.

    To prevent the paperclip from damaging the contacts of your iPhone or iPad (2, 3, 4), you can wrap the paperclip in cotton wool or a cloth.

    Check Control Center

    Also turn on your tablet, and make sure you have sound turned on in the control center. This means that the bell icon should not be crossed out with a red line. If it is still crossed out, then click on it once to make sound on the iPad.

    Check volume key

    First, you should check the most obvious reasons why audio isn’t working on iPad. Make sure you haven’t accidentally muted the sound. This happens quite often if several family members are using the same tablet. Press the volume up / down key and check the sound on the tablet.

    Check the mute button

    Earlier iPad versions have an extra button just above the volume key. This button is for turning off the sound. Switch it to a different position and check the sound on iPad.

    You can also check your tablet settings to make sure that you have not activated the option due to which the sound on the iPad does not work. To do this, go to the menu “Settings” “General” “Switch on the side panel” “Mute”.

    If this option is selected on your iPad, then the button above the volume key is responsible for mute. You can select the “Orientation Lock” option so that the button does not mute, but flips the screen.

    Why doesn‘t sound work on iPad

    Many users are complaining that the sound is not working on the iPad. This can happen to anyone, regardless of the tablet model. However, we have found that iPad audio may drop out immediately after iOS update if you are using an older iPad model. Anyway, this is a rather unpleasant situation that needs to be corrected.

    Let’s take a look at a few solutions to help you if audio isn’t working on iPad.

    Soft reset iPad

    Quite often, a simple reboot of the tablet helps with the problem when the sound on the iPad is not working. Press and hold the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple logo appears, then release the buttons (ignore the red slider). Sound should return to iPad after soft reset.

    If the soft reset does not work, then you need to perform a hard reset, or a factory reset.

    Factory reset

    Attention: hard reset deletes all personal data from the tablet, so before performing it, you must create a backup copy of the data.

    First, connect your iPad to your computer and create a backup in iTunes.

    After creating a backup, go to the “Settings” menu on your iPad.

    Click on “General” and scroll down to the “Reset” option.

    Click on “Reset”, and when prompted, click on the warning messages.

    Note: It is recommended that you plug your iPad into a power source during a factory reset.

    These four easy solutions should help if audio isn’t working on iPad.

    Checking the headphones

    Of course, the described techniques cannot be a panacea and the only solution for all possible situations. Each device is unique, including your iPad. Photos of all models are the same, it’s true, but all tablets are used in different ways and with different intensities.

    Therefore, in order to say specifically what is the reason for the lack of sound from you, you need to carry out a mini-diagnosis of your gadget. precisely, it is necessary to determine when there is no sound on the device, as well as whether melodies are played in the headphones.

    The thing is that the iPad can make sounds thanks to the speakers, while the headset, which connects to the tablet with wires, itself plays the role of those very devices that play music. If there is sound in the headphones, then the problem may be in the speakers.

    Missing audio in video

    There are situations when the audio on the iPad is missing when playing videos. Everything develops as follows: when playing music, everything is fine, but if you start a video. problems begin, there is no sound. In this case, the above two methods will not work, no matter how hard you try. It’s all about the codecs, which are responsible for the normal playback of audio tracks that come with the video file. It may well be that before such a problem happened, you carried out a software update, due to which the codecs were knocked down.

    To normalize the device and return sound to your favorite movies, it will be enough to install a new video player. One of those in the first positions in the AppStore will do. They are, as a rule, the most popular, and therefore the most proven programs that are used by millions of users. Roughly speaking, you can trust such applications and count on their quality work.

    Lever problem

    Another reason for the loss of sound on the iPad may be the toggle button on the side panel that has been moved to the appropriate position. The thing is that on the device you can change the layout of the buttons, namely their meaning. As for this lever, it is able, for example, to mute the sound, activate the transmission of mobile data and perform other actions.

    If on your computer, this button is responsible for sound, then moving it to the off position may be the answer to the question of why the iPad has lost sound. Again, fixing this issue is very simple. return the lever to its normal position.

    Sound problems. change settings

    Of course, there are situations when the sound on the iPad has disappeared. This happens suddenly, and, as users themselves observe, there is nothing to be done about it: the volume rocker does not help to return the previous level.

    In such a situation, the main thing. do not panic. First of all, you need to configure the iPad, for this you need to go to the corresponding menu tab. There is an item “Basic” (meaning settings), in this submenu we find the checkbox “Mute”. This item was created in order to block any sounds from your computer in the right situations. Accordingly, it can be the reason for the absence of sound.

    I lost sound on my iPad. what to do? How to get sound back on a tablet

    Active users of tablet computers constantly use the sound playback function on their device. It is understandable, sound effects in games, music in various applications and, of course, tracks in films and TV shows. all this has become an integral part of a device such as the iPad, a photo of which is in the article.

    Other situations

    Of course, speaking of all sorts of situations that the owners of tablet computers can get into, it is impossible to form specific solutions to all problems, including accurately answering the question of why the sound on the iPad disappeared. The above are basic techniques that anyone can use without resorting to anything unique. No special knowledge and skills are required for this either. After performing the simple operations suggested in this article, you can return the sound to your tablet or understand why the music does not play.

    If nothing helped and you cannot say why the sound on the iPad disappeared, then try to remember the last time your device sounded. You need to understand what events or situations separated the period when everything was functioning normally, and the state in which the tablet does not reproduce any sounds. For example, maybe you dropped your tablet or moisture could get into it. All this can cause mechanical damage to the reproducing elements, which will lead to the absence of sound.

    If something of the above really took place, then you will not be able to return the sound to the tablet on your own. Probably, for this it will be necessary to replace some part, which is impossible to do at home, without skills and appropriate equipment. Therefore, just take your device and carry it to the service center, where you will be provided with qualified assistance. Experts will diagnose the iPad, identify the problem and solve it.

    System crash

    Sound problems can occur due to a recent system update or a system crash. In this case, you need to restart the device by holding the “Power” button for a long time.

    If this does not help, you can resort to a more radical method: restore iPad with a full reset, but before that, be sure to create a new backup so as not to lose important data. Read about how to do this in our articles.

    Switch position

    On some iPad models, there is a switch on the side panel that allows you to lock the device from changing orientation and put it in silent mode. The user should check that the position of the switch is as shown in the image below.

    Why did I lose sound on iPad

    Before contacting the specialists in the service center, the user can try to restore the sound on the iPad himself. Below are the main causes of this problem, as well as how to solve it. We recommend starting with the first one and going through the list until the sound reappears.

    The first thing that is recommended to do if the sound is lost is to open the device settings and go to the “Sounds” section, where you can set the desired speaker volume. Try also to change the volume with special buttons on the case.

    No sound when activating the Siri voice assistant

    Voice assistants are gaining more and more popularity today. One of these is Apple’s Siri. Some users are faced with a lack of response to a voice command and any sound alerts. This is because Siri does not work when the tablet is screen-down. It is enough to disable this function in the settings.

      Go to the tablet settings, then to the section “Privacy”. “Movement and fitness”.

    Deactivate the “Fitness tracking” function, thereby the voice assistant will always work, regardless of the position of the device.

    Do Not Disturb Mode

    This mode is designed to limit the sounds for alerts, notifications, and calls when iPad is locked. Therefore, if the function is turned on, the sound on the tablet will not be played.

    Go to the “Do not disturb” section and change the position of the toggle switch to the left.

    Volume Limit and Mono Audio

    These functions affect the sound reproduction in the headphones. The first allows you to control the maximum volume for comfortable listening, while the second changes the balance of the right or left channel.

    Open the section “Music”. “Volume Limit”.

    Slide the switch all the way to the right and check if there is sound.

    Scroll down the list and find the “Mono Audio” item. Turn off the function by sliding the toggle switch to the left.

    Headphone malfunction

    In some cases, the tablet speakers may work properly, but the sound drops out or becomes very quiet when headphones are connected. This problem can be solved simply: try connecting other headphones that you are sure are working properly. If there is still no sound, it’s the iPad itself, not the headset.

    Connected devices

    You can connect other devices to the iPad using Bluetooth, for example, speakers or wireless headphones. Therefore, the user needs to make sure that at the moment nothing is connected to his tablet and only external speakers are working.

    Go to the Bluetooth section and slide the switch to the left. Now check if the speakers are working.