Sound does not work on the iPhone writes headphones
How to disable the headphone mode on the iPhone
The “headphones” mode. A standard function on all modern devices, and iPhone models are no exception. When the user connects the headset after 3.5 mm Nest or Lightning connector, this mode is activated and disables the operation of the speakers, redirecting the sound to the headphones. The problem that we will analyze today is a mistake when, with a disconnected headset, the mode continues to work, and external speakers do not reproduce melodies and sounds.
If the “headphones” do not turn off on their own (sometimes the icon continues to burn in the upper line of information (where the battery charge and time), and when changing the volume of the side buttons, “headphones” are written, and not “call”), then this clearly indicates that that the regime or the iPhone itself is faulty. In such cases, the sound disappears, it is impossible to hear the interlocutor on the speakerphone, just like a call or sound of messages, which is poorly affected by the comfortable operation of the device. It is not necessary to contact the service center. As practice shows, repair is possible at home. We will analyze all the possible reasons for this problem, because of which the smartphone hangs in this mode.
The instructions set forth in the article below are suitable for repairing any mobile device from Apple.
Connect and turn off the headphones.
The first thing you should try if your iPhone thinks that the headphones are connected is just to connect and disable them. Perhaps the headphone jack on your iPhone did not recognize when you turned off the headphones for the last time, and still thinks that they are connected. Connection of headphones, and then their shutdown can solve the problem. If this helped, and this situation does not arise with any regularity, consider it a one-time phenomenon and stop worrying.
In the latest IOS versions, you can control where the sound is played: headphones, iPhone, homepod speakers, other external speakers, etc. D. Perhaps the problem of the headphone regime is related to the audio output settings.
To check it:
- Open the control center. On most iPhone, this can be done by running a finger up from the bottom of the screen. On the iPhone X, XS, XS Max and XR, draw a finger down from the upper right angle.
- The further process depends on which version of iOS you use. In iOS 10, run a finger from right to left to open an element of music control. In iOS 11 and above, touch the element of music management in the upper right corner.
- In iOS 10, touch the sound control element at the bottom of the panel. On iOS 11 and above, touch the AirPlay icon, presented in the form of three rings with a triangle.
- In the menu that appears, if the iPhone is available, tap it to send the sound to the built.In speakers of the phone.
Active Bluetooth device
Very often, users forget that a Bluetooth device is connected to the phone (headset or wireless column). Therefore, the problem will be solved if the wireless connection is interrupted.
To do this, open the settings. Select the Bluetooth section.
Another interesting way to clean the connector. Take hair hair dryer, turn on the fan, but first without air heating. Grind the iPhone thoroughly first cold air. If it does not help, then turn on the air heating. But when blowing hot air, be careful, do not grant very much, because it can adversely affect the battery.
Why is your iPhone stuck in headphones mode
If you are stuck in the volume mode of the headphones on your iPhone / iPad / iPod, even after disconnecting headphones or speakers from headphone nest, you may face an annoying error on your iOS devices. This may be due to any conditions below:
16 Easy Ways to Fix iPhone Stuck in Headphones Mode
- One. Disconnect headphones or speakers too fast.
- 2. Disconnect headphones or speakers when your device is busy.
- 3. Using low.Quality or incompatible headphones.
- 4. The problem arising in the headphone jack.
The above methods are available for updating all iOS (iPhone, iPad and iPod) devices to iOS 6/7/8/9.
ALL IPHONES: SPEAKER NOT WORKING / HEADPHONE MODE STUCK / HEADSET MODE STUCK
Why is the sound disappeared on the iPad
Before contacting specialists in the service center, the user may try to restore the sound on the iPad. Below are the main causes of this problem, as well as ways to solve it. We recommend starting with the first and walk on the list until the sound appears again.
The first thing that is recommended to do if the sound disappears is to open the settings of the device and go to the “sounds” section, where to set the desired volume of the speakers. Try to also change the volume with special buttons on the case.
Function “Limiting Limit” and “Mono Audio”
These functions affect sound reproduction in headphones. The first allows you to control the maximum volume for comfortable listening, while the second changes the balance of the right or left channel.
The position of the switch
In some iPad models on the side panel there is a switch that allows you to block the change of orientation of the device and transfer it into a soundless mode. The user should check that the position of the switch is such as in the image below.
“Do not disturb” mode
This mode is designed to limit sound signals for warning, notifications and challenges when the iPad is blocked. Therefore, if the function is turned on, the sound on the tablet will not be reproduced.
Falf of headphones
In some cases, the dynamics of the tablet can work properly, however, when connecting headphones, the sound disappears or becomes very quiet. This problem is solved simply: try connecting other headphones, in the serviceability of which you are sure. If there is no sound anyway, the point is in the iPad itself, not the headset.
You can connect other devices to the iPad using Bluetooth, for example, speakers or wireless headphones. Therefore, the user needs to make sure that at the moment nothing is connected to his tablet and only external speakers work.
Sound problems can occur due to a recent renewal of the system or its failure. In this case, it is necessary to restart the device, holding the “Food” button for a long time.
If this did not help, you can resort to a more radical method: IPAD restoration with a complete discharge, but before that, be sure to create a new backup copy so as not to lose important data. About how to do this, read in our articles.
There is no sound when activating the voice assistant siri
Voice assistants today are gaining more and more popularity. One of these is Siri from Apple. Some users are faced with the lack of a voice command and any sound alert. This is due to the fact that in the position of the tablet down the siri screen does not work. It is enough to turn off this function in the settings.
Go to the tablet settings, then to the “Privacy” section. “Movement and Fitness”.
Symptoms of lack of sound on iPhone
According to our study, the iPhone has different symptoms, no problem with sound.
- One. Iphone will call, but the speaker does not work for anything else. For example, when you were called, the iPhone notified you, but nothing is heard through the speaker.
- 2. There is no sound on the iPhone for calls, music, video or applications. Your iPhone completely turns into a silent device. It doesn’t matter if you listen to music, play movies or call by phone, you will not hear a sound.
- 3. There is no sound in the iPhone, as it is stuck in headphones mode. This problem is often found, since iOS does not detect that you have removed the headphones, especially when using a pair of headphones of the third part.
Falf of headphones
If the sound of speakers works correctly, but when connecting headphones you do not hear anything (or the sound is extremely low.Quality), most likely, in your case, there is a breakdown of the headset itself. Check it is simple: just connect any other headphones to the phone, in the performance of which you are sure. If there is no sound with them, then you can already think about iPhone hardware malfunction.
The following types of breakdowns can be attributed to the hardware malfunction:
If the phone previously fell into snow or water, most likely the speakers will work very quietly or completely stop functioning. In this case, the device should dry well, after which the sound should earn.
In any case, if you suspect a hardware malfunction without proper skills in working with iPhone components, do not try to open the case yourself. Here you should contact the service center, where competent experts will perform full diagnostics and will be able to identify, as a result of which sound stopped working on the phone.
Lack of sound on the iPhone is an unpleasant, but often solved problem. If you have previously encountered such a problem, tell us in the Комментарии и мнения владельцев how it was eliminated.