Sony Speaker Does Not See Bluetooth

Wireless speakers

Choose a few more products to compare

Sony collaborated to improve the sound quality of compressed MP3 files.

Equipment tuned for powerful bass.

Built-in Wi-Fi enables fast file sharing with laptop or other devices.

Convenient short-range wireless connectivity between phones, laptops, headphones, etc.

NFC system allows devices to quickly exchange data.

No need to buy AA or AAA batteries, use the battery over and over again; charger included.

  • High quality sound with X-Balanced Speaker Unit and tweeter
  • Incredible 3D sound with LIVE SOUND mode
  • Linear Light / Tweeter Light / Speaker Light
  • High quality sound with X-Balanced Speaker Unit and tweeter
  • Incredible 3D sound with LIVE SOUND mode
  • Linear Light / Tweeter Light / Speaker Light
  • IP67 water and dust resistant
  • High sound quality thanks to the X-Balanced Speaker Unit
  • Rugged construction with shock protection
  • IP67 water and dust resistant
  • High sound quality thanks to the X-Balanced Speaker Unit
  • Rugged construction with shock protection
  • Compact, lightweight and portable system
  • High sound quality thanks to the X-Balanced Speaker Unit
  • IP67 water and dust resistant
  • Compact, lightweight and portable system
  • High sound quality thanks to the X-Balanced Speaker Unit
  • IP67 water and dust resistant
  • EXTRA BASS ™ for deep, energetic sound
  • Portable and up to 16 hours of battery life
  • IP67 water and dust resistant
  • EXTRA BASS ™ for deep, energetic sound
  • Portable and up to 16 hours of battery life
  • IP67 water and dust resistant
  • Widely dispersed sound with outdoor party mode
  • Reliable battery and wireless connectivity
  • Waterproof top panel
  • Widely dispersed sound with outdoor party mode
  • Reliable battery and wireless connectivity
  • Waterproof top panel
  • Experience unique 3D sound with LIVE SOUND mode
  • Linear Light / Speaker Light / Flashing Strobe
  • IP67 waterproof and dustproof
  • Experience unique 3D sound with LIVE SOUND mode
  • Linear Light / Speaker Light / Flashing Strobe
  • IP67 waterproof and dustproof
  • Experience unique 3D sound with LIVE SOUND mode
  • Linear light / flashing strobe
  • IP67 waterproof and dustproof
  • Experience unique 3D sound with LIVE SOUND mode
  • Linear light / flashing strobe
  • IP67 waterproof and dustproof
  • Experience unique 3D sound with LIVE SOUND mode
  • Linear illumination
  • IP67 waterproof and dustproof
  • Experience unique 3D sound with LIVE SOUND mode
  • Linear illumination
  • IP67 waterproof and dustproof
  • EXTRA BASS ™ for deep, energetic sound
  • Compact and lightweight speaker system weighing about 160 g
  • Convenient and reliable in use thanks to the waterproof design
  • EXTRA BASS ™ for deep, energetic sound
  • Compact and lightweight speaker system weighing about 160 g
  • Convenient and reliable in use thanks to the waterproof design
  • EXTRA BASS ™ for deep, energetic sound
  • Portable and up to 16 hours of battery life
  • Reliable protection against water
  • EXTRA BASS ™ for deep, energetic sound
  • Portable and up to 16 hours of battery life
  • Reliable protection against water
  • High-resolution audio playback
  • Wi-Fi and Bluetooth® streaming with NFC ™ connection
  • Broadcast Music To Multiple Rooms With Sony | Music Center
  • High-resolution audio playback
  • Wi-Fi and Bluetooth® streaming with NFC ™ connection
  • Broadcast Music To Multiple Rooms With Sony | Music Center
  • Wi-Fi and Bluetooth® streaming with NFC ™ connection
  • Broadcast Music To Multiple Rooms With Sony | Music Center
  • 2-way speaker and two passive radiators for rich sound
  • Wi-Fi and Bluetooth® streaming with NFC ™ connection
  • Broadcast Music To Multiple Rooms With Sony | Music Center
  • 2-way speaker and two passive radiators for rich sound
  • High-Resolution Audio for Amazing Sound
  • High quality Bluetooth® audio with LDAC technology
  • Sony | Music Center: Music in all rooms of your home
  • High-Resolution Audio for Amazing Sound
  • High quality Bluetooth® audio with LDAC technology
  • Sony | Music Center: Music in all rooms of your home
  1. 1 Product descriptions and specifications are subject to change without notice and brought to the attention of consumers in accordance with the requirements of applicable law.

Read us on Vkontakte

Like it on Facebook

Follow us on Twitter

Subscribe to our YouTube channel

Follow us on Instagram

Our site is not optimized to work with your browser. We recommend downloading and installing the latest version of one of the following browsers:

Our site is not optimized to work with your browser. There may be a new version of your browser available

The speaker does not connect via Bluetooth to the laptop

Surround sound lovers are constantly trying to improve their home playback systems. This is understandable. Your favorite movie on a laptop is more pleasant to watch with high-quality soundtrack. For this purpose, any external sound production device, for example, a wireless speaker, can easily cope. The case is small. How to connect it to a computer?

How to connect a Bluetooth speaker to a laptop

First, you should check if your laptop has a Bluetooth module. It is very easy to do this:

  1. On the keyboard, you must simultaneously press “Win” and “R”.
  2. In the line of the Run window, type the command “devmgmt.Msc” and press the “OK” key to open the “Device Manager”.

If the “Bluetooth” section is not in the list, you must open the “View” menu at the top of the window and check the box next to “Show hidden devices”. After that, the device will probably appear.

After we have found out that working with bluetooth is possible, turn it on. To do this, open the side panel (on Windows 8 and 10), which is located in the lower right corner, where we activate Bluetooth by pressing. If you are working in Windows 7, then on the bottom toolbar open the “curtain” (“checkmark” on the right next to the date and time), find among others the bluetooth icon, right-click on it and turn it on. Of course, this tray icon may not be present. In a similar situation, go to the “Control Panel”, and then open the “Network and Sharing Center”. At the bottom left there is an item “Change adapter parameters”. Open it. Further:

  • Right-click on “Bluetooth Network Connection” and select “Properties”;
  • In the window that opens, click “Bluetooth” and turn on the network with the switch of the same name.
Read more:  How to Connect Bluetooth to Phone

So, everything is ready: the wireless data transfer on your laptop is active, it remains only to achieve pairing with the speaker.

We turn on the speaker itself and bluetooth on it (either there should be a button with the wireless module icon, or you need to hold down the on / off button and hold it for a while). When Bluetooth is activated, the indicator on the device will flash.

Now all setup will take place on the laptop. In the system tray (“shutter” in the lower right corner), find the desired icon, right-click on it and select “Add device” from the list. After the module finds the column, we establish a connection. You can do it according to another algorithm:

  • Open “Settings” (gear icon in “Start”);
  • Open the “Devices” tab and select “Bluetooth and other devices” in the list on the left;
  • If the desired name is not in the lists, then click on “” at the top;
  • Wait for the search to complete, select the column name and connect.

Why the laptop does not see the bluetooth speaker

What if everything is connected, but the device remains invisible? Let’s figure it out.

Most likely the problem is in outdated drivers. The fix is ​​very easy:

  • You need to open the “Device Manager” (at the beginning of the article it was said about how to do this);
  • Go to the “Bluetooth” section;
  • Check if there is a yellow triangle with an exclamation mark next to the name of the installed module. If there is one, then we start updating;
  • Download the latest version of the required driver from the official support site of your laptop and install it.

After that, the problem should go away.

If it’s not about the drivers, then it’s worth checking one more nuance. In the “Settings” when setting up the connection, the checkboxes “Allow Bluetooth devices to find this computer” and “Show Bluetooth icon in the notification area” should be checked. Windows 10 users need to go to “Other Bluetooth Settings” (see the list on the right).

Done! Now your laptop will find devices in the access zone and will be able to connect to them without any problems.

Bluetooth problems in laptop

If all of the above troubleshooting options did not help you, then the error is much deeper than usual. Perhaps it lies in a factory defect or incorrect assembly of the laptop, and therefore the laptop does not see the bluetooth speaker. To fix it, you will have to take the device to a repair service.

However, such an outcome of events is unlikely. This communication technology is firmly rooted in the stuffing of every technological product. Bluetooth operating standards are so reliable that it’s hard to imagine why they might fail.

Driver update

In a situation where even with a wireless connection connected, a connection between a laptop and a bluetooth speaker is not established, you will have to update the drivers. You can do this manually through the control panel of your computer, laptop.

Follow these steps step by step:

  • Press the key combination “Win R”.
  • In the window that appears, write “Device Manager”.
  • Open the relevant section in the search results.
  • Find the Bluetooth speaker inside and go to the device options.
  • Then select “Update driver”.

Thus, the system itself will find on the Internet and install the official drivers for the wireless adapter and the device will continue to work. This method is suitable for owners of operating systems Windows 7, Windows 8 and 8.1, Windows 10.

Bluetooth device status

If you are sure of the consistency of the portable speaker, check the bluetooth technology on your computer. To do this, turn on the wireless adapter built inside the laptop.

For Windows, the following instruction is suitable:

  1. To check and turn on Bluetooth, go to the start menu.
  2. Go to the setting through the “Devices” tab and from there to the “Bluetooth” item.
  3. Then enable or reconnect the technology on the computer.

Some laptops have a dedicated power button with a bluetooth icon. By holding down this button and the special function key Fn, you turn on the corresponding equipment on your laptop or PC. A bluetooth beacon on the laptop panel will signal this to you.

The laptop does not see the bluetooth speaker

Listening to music through a Bluetooth speaker from a laptop is the first option to improve the sound quality of songs. In 90 percent of cases, speakers on laptop computers are not famous for their sound and performance. Whereas a portable speaker has a wider sound range, it plays out loud and clear.

Sometimes the laptop does not see the bluetooth speaker and it is impossible to connect to it. Before taking a portable speaker or computer to the workshop, it is worth determining the reason why bluetooth does not see the laptop as it should. To do this, exclude all possible variants of the problem.

We suggest taking a closer look at the variations of connection problems and how to fix visibility errors.

Bluesoleil App

On the Internet, you can download software from the BlueSoleil company, which will provide a stable wireless connection between the modules. This is the official supplier of Bluetooth technology. The software of this company is installed on many PCs, Laptops, Tablets.

Invalid password

Mostly when forming a connection between the player and the speaker, be sure to use the correct password for the network. The factory default pin code is set to 0 0 0 0. It may have been changed. To do this, go to the parameters of the bluetooth device on the laptop and change the password digits.

The main reasons why the speaker does not connect to the phone via Bluetooth

Bluetooth speakers have gained wide popularity among both children and adults. This is not surprising, since the portable device is able to demonstrate the pleasant sound quality of your favorite music tracks. Sometimes the phone “does not see” the speaker connected via bluetooth. There can be several reasons for such a problem, we will consider each of them and outline the troubleshooting methods.

Alternative connection

If there is an NFC module on both devices, then you should try to connect with it. Perhaps the system is configured for this particular pairing option, and the usual method will not be able to complete the procedure.

To connect via NFC, you need to bring the smartphone as close as possible to the speaker, then a confirmation request will appear on the screen. If you answer in the affirmative, you will be able to complete the procedure and start listening to music.

Connection types

First of all, let’s figure out what are the options for connecting portable speakers to smartphones. In most cases, data transfer is implemented in one of the following ways:

  • Wired connection via the AUX socket. This method causes some inconvenience in terms of using wires, but with its help you can achieve the maximum quality of the music played. In addition, this option implies the simplest connection. Just plug the cable into the connector on your portable device and mobile phone.
Read more:  iPad 2 Does Not Upgrade To iOS 10

Wireless connection via bluetooth. Convenience is achieved by eliminating the need to carry a cable with you. Also, the user gets more freedom of action. The smartphone can continue to be used in normal mode at a distance of up to 10 meters from the speaker. Bluetooth transmitter is built into every mobile device, and its versions are backward compatible, so there are no compatibility problems.

Since the method of connecting through a wire is simpler, there may be less difficulties. Most of the problems concern the integrity of the cord and connectors. But with Bluetooth, everything is a little more complicated, we will understand this issue in detail.

Connecting to another accessory

Sometimes the phone does not find the Bluetooth speaker after turning it on, because there is another accessory of a similar plan nearby, to which it was also previously connected. In this case, the smartphone could automatically connect to it. You need to open the settings of the mobile device and view the current connections.

If the statement is confirmed, you will need to untie the second column from the phone. Then put the first one into pairing mode and proceed according to the instructions above.

Failure to reconnect

Often after the first pairing, the Bluetooth speaker is automatically recognized by the phone after being turned on. This allows you to start playing music right after turning on the power. However, it should be borne in mind that this does not always happen. It may be necessary to reactivate the pairing mode and carry out the connection procedure as described above.

Breaking

Do not exclude the possibility of equipment failure. If the bluetooth speaker does not turn on, then pairing will not work. The first step is to make sure her battery is charged and the power is on. In the event of an abnormal situation, you will need to contact the service center under warranty.

Also, the problem may be on the side of the smartphone: an operating system failure or a broken Bluetooth module. Initially, you should restart the device and try again. Then try to pair with another device, such as a headset. If this fails, the Bluetooth module is broken. There is only one elimination option. Contacting a specialist for repair or replacement.

Why the mobile phone does not detect the headset

There may be several reasons for this:

  • The headset just isn’t turned on.
  • Sync function not enabled.
  • Battery low.

As you can see, there are not so many reasons why the phone does not see the Bluetooth headset. And all of them are in the connected equipment. The fact is that there are practically no settings on mobile devices (tablets, smartphones, etc.). You can only turn on or off the bluetooth adapter and activate the discovery function.

What to do if the phone does not see the Bluetooth headset. Why does my phone not see a wireless bluetooth headset

Why does the phone not see the Bluetooth headset? Questions like this are common. The fact is that for many years now, a wireless headset has been in great demand. After all, it is very convenient, especially for drivers. over, traffic rules prohibit talking on a mobile while driving. This is what wireless headphones are used for. We wrote about how to listen to music via a Bluetooth headset in the previous article. But despite this, many users do not know how to use it.

To do this, you need to know some features and rules of application. over, first you need to pair the devices. In other words, add wireless equipment to the connection list on your smartphone. At the same time, in order to avoid certain inconveniences, after you have synchronized the devices, the headset will no longer be detected by other mobile phones. If you do not know How to use a wireless Bluetooth headset, read this material.

How to connect a wireless headset

But, if earlier the headphones were paired with another smartphone, then the pairing function on them is disabled. In this case, you need to press and hold the power button for about 10-15 seconds.

An indicator that the detection has turned on will be indicated by the indicator, which should start blinking or, on the contrary, be constantly on. Depending on what state he was in before. After that, you will need to enter the pairing code on your mobile device. Just enter 0000. This is the key set by the manufacturer.

There are cases when a new Bluetooth headset does not connect to the phone. The fact is that on some models of headphones, the pairing function is always disabled. That is, even when the headphones are turned on for the first time, the mobile phone will not detect it. In this case, follow the above steps.

Sometimes, such problems can occur as a result of a low battery level. The fact is that wireless headphones use a battery that loses charge over time. It should be noted that this problem does not necessarily affect only devices that have already been in use. Often the equipment lies on the counter for a long time and even with the power off, the battery, although slower, still consumes energy. Therefore, if you have problems syncing. Then try replacing the power supply. You can read about how to choose the right Bluetooth headset here.

There can be no other reason, since there are no settings. over, all Bluetooth devices operate on the same frequency range, so there are no divisions by manufacturer brands. If you have a tablet, our other material on pairing a Bluetooth headset may be useful to you.

How to connect Bluetooth headphones to your computer

I have over 10 years of experience in IT. I am engaged in design and adjustment of commissioning works. I also have extensive experience in building networks, system administration and working with access control systems and surveillance.
I work as a specialist in the Techno-Master company.

Sony Speaker Does Not See Bluetooth

Self-help troubleshooting

First, try troubleshooting yourself. To do this, follow these steps with the column:

  • Check if it is charged. If it is discharged, the power button will blink, if charged, just light.
  • Check if the bluetooth function works. After turning it on, a corresponding sound should be heard. If it is not there, but the device is working, then the bluetooth is faulty.
  • Look in the settings of all nearby phones to see if any is paired with the unit. Someone’s phone may have paired before and now did it automatically.

Features of the speakers via Bluetooth

The column has a built-in bluetooth module through which data transfer occurs. The most popular is the jbl model, however, they all work on the same principle. It runs like this.

  • The power of the speaker turns on.
  • Then you need to turn on the “bluetooth” function.
  • Then a similar function is activated on the phone.
  • In the phone settings, you need to find the name of the unit, and connect to it.
  • Next comes the pairing, and you can freely enjoy music up to 10 meters from its source.
Read more:  What Does Screen Repeat Mean on iPhone

But the work does not always go so smoothly, and when trying to pair, the phone may simply not display the names of close bluetooth devices. This indicates a malfunction of the technique. They can be of different kinds.

Why the phone does not see the speaker on bluetooth

Bluetooth speakers are a very popular tool among different ages. Especially among young people. And it is not surprising, because they are convenient and allow you to simultaneously pair your phone and listen to music, using it as usual. But when working through bluetooth, various problems arise. The most common is that the telephone does not recognize the unit. Let’s figure out why this is happening, and how to fix these problems.

Reasons why the phone may not see the speaker

Possible causes are of two types:

  • Software;
  • Technical.

First, you should check the program settings and the simplest reasons for possible problems. And only then find out what problems can be with the “iron”.

Settings problems

First, let’s deal with the simplest one. The settings. But before diagnosing a technical problem, find out if all the conditions for the operation of the devices are met. So, check:

  • Whether the column is charged;
  • Whether it is on;
  • Is the bluetooth function enabled on both devices;
  • Whether the distance exceeds the permissible limit;
  • Whether there are other electronics between the devices that may cause interference;
  • Whether the speaker is paired with other devices.

These are the most common software problems associated with correct settings.

What may be technical malfunctions

If all the above conditions are met, and the phone still does not see the speaker, then there is a possibility of technical problems. The following are the manifestations of technical problems:

  • The column does not work at all;
  • It does not charge;
  • Bluetooth function does not work on both devices.

If the device does not charge, accordingly, it will be discharged at the time of pairing. A discharged device is not capable of transmitting a signal, so the phone will not see it. Also, the search for devices and signal transmission function may be completely absent.

In the first two cases, the loop may be damaged. In the second, the Bluetooth module fails. The reasons may lie in another, but in any case, they are associated with the breakdown of the “iron”.

The speaker has already been paired with another device

The second possible reason in 50 percent of cases is the current connection of the audio speaker to another gadget. Look, you may have previously connected another device, and now it is nearby. It can be anything: tablet, computer, another phone.

We will exclude in advance the possibility of pairing from outside devices. If a pin code is set on the speaker, a stranger will not be able to link the two devices. As a result, if there are no other devices nearby, we will solve the problem in another way:

  • For the device to cancel the current pairing and connect a new one, hold the Bluetooth power button on the speaker.
  • After the pairing function is disabled on the phone, a window will pop up asking for the code.
  • If you do not remember or did not set the password, then the factory code is set as standard for 90 percent of the devices. 0 0 0 0.
  • After confirming the code, the device will connect to the audio speaker.

Due to the perfection and technical simplicity of others, obvious problems are rarely encountered when connecting to a mobile portable speaker.

With audio speaker

Here are the required points to check:

  • First of all, make sure that the speaker is not connected to any device and that it is charged and working. Charging should be sufficient: sometimes interference occurs with low battery power.
  • Next, reconnect the wireless connection with the second product. You can find out or change the authorization code through the speaker’s internal programs.
  • If none of this helped, but you want to listen to music through bluetooth, you will have to take the device to the master.

With phone

Smartphone diagnostics is performed in a similar way through internal Bluetooth settings.

If you still can’t connect, try resetting the wireless service timeout. To do this, in the settings, find the items “Visible device time” or “Device timeout” and check the “Do not use” checkbox, or disable this feature altogether.

Bluetooth is not enabled in the phone

It so happens that the speaker is working properly, but the bluetooth does not turn on on the phone. If you remember to enable the technology, and the problem persists, go to the service settings. Try starting wireless from there. Let’s write down detailed instructions:

  • Place your smartphone and speaker at a distance of several centimeters from each other, preferably even close.
  • We go to the bluetooth settings on the gadget. An example for an android system: to turn it on, hold the bluetooth icon on the working panel. You will go to the service settings, where you need to move the slider to the “On” position. After that, we are waiting for the service to work and a blinking light indicator appears.
  • Without leaving the settings, go to the “Available devices” section. There we find the necessary audio speaker and connect to it.
  • Additionally, enter the pin code set on the column. You can find this pin code in the instructions for the device.

If the smartphone continues to not see the portable player, download and use the bluetooth pair app. In some cases, it will help you connect to your smartphone.

Another reason follows from this reason: the audio speaker is discharged and not turned on. These commonplace problems will not help in the event of a real breakdown of a speaker or specifically Bluetooth, but they will cut off other problems.

If none of the above helped, we continue to look for the root of the problem.

Device compatibility

Let’s break the old popular myth: if a smartphone does not connect to JBL acoustics, then it is incompatible with it. This is not the case in 90 percent of cases.

Bluetooth technology software works so that if the service is installed on two devices, they will connect. The principle of this technology is incredibly closely intertwined with the existence of speakers and telephones. In other words, the connection between devices is unshakable, and constant.

As a result, if the devices lost visibility, there are only two reasons. Let’s take a closer look at each of them below.

Diagnostics and problems

Sometimes there is neither the time nor the money to take both devices to a service center to determine what exactly is wrong. In this case, conduct a self-diagnosis of the Bluetooth connection.