Setting Up Digital Television On A Samsung Tv

Samsung

What is required

If the owner of a Supra TV plans to watch digital channels, he must first find out if his TV supports this format. Information can be obtained by reading the instructions, in which the equipment manufacturer indicates all technical and operational data. In the event that the TV does not support digital format, the user needs to purchase a set-top box. This device is designed to receive, decode and play signals received from regional or local providers. Each person can do the connection of a digital TV set-top box independently, using the instructions.

Setting up the Supra TV for digital television must be carried out using the remote control. The owner should first check its serviceability, the presence of working batteries.

Manual Channel Tuning

In some cases, owners of Supra TVs cannot automatically search for channels. They should be used in the TV menu to select manual mode by pressing the corresponding key. To do this, you need to enter the desired section of settings by clicking on the “TV SETUP” button. Then the manual mode is selected: in this case “SEARH”. The user should press buttons 3/4. The system will start searching for channels, after which each will have to be saved in manual mode.

How to tune your Supra TV to digital TV

Today in the territory of the Russian Federation people are massively switching from analogue to digital television. This is primarily due to the high quality of the signal, as well as the ability to view more channels. Owners of all modifications of modern TVs, as well as people with outdated TVs, can make the transition. In such a situation, they need to purchase special receivers that will receive and decode signals. In the instructions, they will be able to learn how to tune the Supra TV to digital television, in manual or automatic mode.

Setting Up Digital Television On A Samsung Tv

Automatically tune channels on your TV

To reduce the time spent searching for channels, the owner of the Supra TV can do everything automatically. To do this, press the “TV SETUP” button on the remote control. Next, you need to click on the “PRESET” button. Several buttons will appear in front of the user, from which you should select “AUTO SEARH”. As soon as the command is given to the system, it will automatically start searching and saving digital TV channels.

How to set up a new TV

Regardless of which TV tuner has a built-in or external, the channel tuning process must be performed according to plan:

  1. All additional equipment is initially connected.
  2. An analog antenna is inserted into the TV, into the corresponding socket.
  3. The “DVD / TV” key is pressed on the remote control.
  4. After switching to the mode of receiving television channels, click on the “TV SETUP” button.
  5. The screen should display certain color data: background, saturation, contrast, brightness.
  6. The user must make all the functional settings: language, picture width. It is imperative to configure the basic system options, in particular duplication, channel interchange, sound, TV standard (in this case, the SUPRA TV is tuned to digital broadcasting).
  7. Additional modes selectable: on / off time, clock, sleep mode, etc.

Setting up cable TV

In the event that the TV owner is faced with the task of connecting cable television, he should act according to the standard scheme. Only in the subsection “antenna” it is necessary to indicate the following broadcasting format (depending on the type of set-top box): Ether (DVB-T2) or Cable (DVB-С).

Features of viewing channels through a set-top box

When choosing a digital set-top box, you should pay attention to the connecting cable connected to the TV. Check out which connectors you have: HDMI 2.0 or 2.1, tulips. Purchase an adapter to connect the set-top box and TV.

Samsung TV varieties

Samsung has been making home appliances since 1930. In 1998, the company introduced the world’s largest LCD TV, measuring 30 inches. Modern models can be divided into 3 options:

  1. Models with built-in tuner for DVB-T digital reception
  2. External device options.
  3. Tvs that do not support digital signal need a set-top box.

The digital channels themselves are broadcast via the Internet for Smart TV or via IPTV. Before setting up the equipment, you need to find out if the TV supports DVB-T2, and specify the year of manufacture and model.

What to do if the TV does not see channels when searching

Auto setup for digital TV on Samsung does not always go smoothly. The reasons for failures may lie in the antenna, receiver, correct connection of the TV to the equipment. To eliminate and restart autosearch, you must:

  1. Check if the receiver is connected to the TV correctly. If the connection is incorrect, the TV does not recognize the device and when you press HDMI 1, the information “no signal” will be displayed.
  2. Reset receiver settings to factory settings. Perform a complete reboot. To do this, go to the menu, find the item “Settings” and “Reset” or “Restore factory settings.” If a password is required, enter 0000, 1111 or 1234.
  3. Try reconfiguring or reconnecting the antenna. You can purchase a signal amplifier that will provide a good connection. Consider the location of the house relative to the tower. The further it is, the more the antenna is needed.

The exact recommendations for advanced digital TV settings on Samsung TV vary by hardware model.

How to find out the model and year of the TV

Setting up digital channels on Samsung begins with specifying the year of release and the TV model. You can do this in 2 ways: go to the TV menu or look at the label on the back panel.

  1. Through the TV menu. Find the “Menu” button on the remote control. Select “Support”. Then, “contact Samsung”. A screen will open with the item “model code”.
  2. On the device label. The information is written in the form of a code, where each letter has its own meaning, for example, UE32F6800. The information is decoded as follows:
  • UE. TV type: UE / LE. Liquid crystal, PS / PE. Plasma.
  • 32. Diagonal, varies from 19 to 105 inches.
  • F. Year of manufacture, its classification: A. 2008, B. 09, C. 10, D. 11, ES / EH. 12, F / FH. 13, H / HU. 14, J / JU / JS. 15, K / KU / KS. 16, M / MU / Q / LS. 17, N / NU. 2018, S. Premium variants of different years.
  • 6800. Digital designation of TV modification.

When the model is identified, check if it supports digital signal reception without a special attachment.

How to determine the presence of a tuner

Without an additional set-top box, you can set up a TV with a built-in or external tuner to receive a DVB-T2 signal. The module easily decodes 20 basic channels, which are transferred to digital broadcasting.

You can check if there is such equipment in your TV model on the official Samsung website or in the passport for the TV. On the manufacturer’s resource, it is enough to find the column “technical characteristics”, go to the “Broadcasting system” or “Tuners”, enter the model data and see if there is a plus in the DVB-T2 column or not. If available, digital TV is available.

Manual search: instruction

So, how to manually tune digital channels on a Samsung TV:

  1. Go to the menu, choose a cable instead of an antenna.
  2. Click in the item country. Eastern Europe.
  3. If necessary, enter the pin code: 0000, 1111, 1234.
  4. In the parameters, select the frequency limits from 298 to 362 thousand kHz.
  5. Go to the settings and set the channel type to “digital”.
  6. In the search mode, put “network” and press the search for available options.
  7. Save found channels.

Unnecessary programs can be removed if necessary. To do this, just go to the “Broadcast” subsection and open “Dispatcher” there. Removal goes through the “Tools” button.

Manual search

You can adjust the TV channels in this way on old Samsung E-series TVs. To get a pool of channels on older models of the receiver, you need to know how to manually tune channels on a Samsung TV. To do this, you must follow the following sequence of actions:

  1. Press “Menu” on the control panel.
  2. Go to the “Channel” tab.
  3. Select the item “Antenna” and replace it with “Cable”.
  4. Go to the “Country” menu item, enter the password “0000”, select “Russia”. If the country is not on the list. “Eastern Europe”.
  5. We follow in the section of the parameters of the cable connection. If there is no such item in the main menu, then you can search for it in automatic settings (on some Samsung TVs such settings are set).
  6. Going to the cable parameters, you need to set the parameters: start frequency. 298000 KHz, end frequency. 362000 KHz. The rest of the settings do not need to be changed.
  7. Open auto-tuning and select the type of received TV channels (digital, analog, satellite).
  8. The search engine opens. Set the “Network” parameter, click “Search”. Automatic channel tuning starts.
  9. All found channels will be saved in the general list, but the TV will show only those TV channels that the user selects.
  10. Unnecessary ones can be deleted by selecting the corresponding items of the drop-down menu.

How to set up digital channels on Samsung Smart TV

The latest receiver models receive and display the highest quality TV signal. Almost every recent TV model has Smart Features. However, many people still cannot figure out the Smart TV parameters on their own. Tuning digital channels on a Samsung TV does not require serious skills. Any user can handle.

Automatic search

Setting up digital channels on a Samsung TV is quite simple and does not require special training. Even an inexperienced user can install equipment and adjust TV channels, spending about 10 minutes on mastering the instructions. Subject to all the rules for installing and debugging the pool of digital TV channels, the image received on the screen will be of high quality.

On modern models, you do not need to press buttons and manually tune TV channels. Tuning Samsung TV channels from the remote control on the Smart TV will take a couple of minutes with minimal effort on the part of the user. The new TV series receive the signal through a special tuner plugged into the antenna connector. Auto tuning is done in a few clicks.

How to prepare your TV for channel tuning

You can only fine-tune channels on your Samsung TV if the TV and all of its components are connected correctly. For correct installation of the receiver, the operating instructions must be followed. Below is an example of the correct connection of the Samsung 6 series model:

  1. For terrestrial or cable TV.
    Antenna is connected to the socket in the ANT receiver through a special cable with a resistance of 75 Ohm. The user will receive an analog signal.
  2. For cable or satellite TV, Blu-ray connection, game console or laptop.
    You will need to connect an HDMI cable to the HDMI jack.
  3. For online use and software updates.
    Requires a wireless connection using a regular Wi-Fi router. Any of the Samsung SMART models supports Wi-Fi connectivity. For a wired connection, you need to insert an Internet cable into the LAN port on the back of the TV.
  4. To watch paid channels.
    It is required to install CI or CI cards. You need to remove the protective film and turn off the TV, place the adapter in the two holes located next to the COMMON INTERFACE port.

Tuning Samsung TV channels from the remote control

In the article below, we will figure out in detail how to tune channels on a Samsung TV. Samsung is a reliable manufacturer of quality equipment. However, the correct setting of the receiver requires some knowledge in order to independently configure the reception of HD channels using the control panel.

How to adjust TV channels on Smart TV

Press the “Menu” button on the remote control.

  1. Select “Broadcast”.
  2. Two windows will open sequentially, in each of which you need to select “Auto-tuning”.
  3. Press “Start”, select the search mode. “Full”.
  4. The program itself will select the available digital channels into a single list.

If at the end of auto tuning, digital TV channels have poor quality or are not displayed at all, you need to check if the equipment is connected correctly and go through all the points from the very beginning.

These methods are universal for setting up a pool of TV channels on Samsung TVs of different versions. If you have any difficulty, contact Samsung service centers for assistance.

Setting up digital TV on Samsung

Digital TV appeared in Russia a few years ago and has been actively used ever since. And this is quite understandable. Firstly, having completed the setup just once, you do not need to constantly adjust the antenna or reconfigure the TV in order to watch something else. Secondly, such television has no interference in the form of stripes or snow. True, if there are any problems with the signal, then you will not be able to watch the programs.

DTV format television is very popular among the population. If you want to connect free channels to your TV, then you do not have to call a specialist, since everyone can do this. The main thing is that your model supports DVB-C tuner standards.

Most of Samsung’s devices follow these standards. It can be both an outdated model and 6 series Smart TVs. Therefore, now we will tell you about what you should do to set up digital channels for Samsung of modern and older series.

Samsung setup

  1. Enter the menu and go to the “Channel” section;
  2. Go to “Country”;
  3. If your TV starts asking for a pin code, enter 1234, 0000 or 1111. These are classic passwords;
  4. In order to set up terrestrial or digital TV go to “Other”;
  5. After that, you need to go back and go to the “Cable Search Options”;
  6. Here you will need to enter certain parameters. It is necessary to set the frequency to 290,000 kHz, the transmission rate equal to 6875 KS / s and modulation of the order of 256 QAM;
  7. Now you again need to go back and go to “Autotuning”;
  8. Further, as a signal source you need to press “Cable”;
  9. We choose “Digital”. If you have not configured analog TV yet, then “Analog and Digital”;
  10. Now, in the search mode, go to the “Network” and start the setup using the “Login” button.

Once everything is found, you can watch the digital and terrestrial channels available in your area.

Setting up Samsung Smart TV

On TVs of the latest series with Smart TV function, it is easier to set up analog TV. To do this, you will need to perform fewer steps.

  1. Go to the Menu and go to the “Broadcast” tab marked with the antenna;
  2. Now you need to select “Auto Tuning”;
  3. In the next menu, also select on “Auto tuning”;
  4. Click on “Start”;
  5. In the window that appears, select the full search mode and go to the “Scanner” menu;
  6. Wait until the TV finds all available channels and click “Close”.

You can now enjoy watching TV.

Cable TV

Cable TV works similar to the rest of the options. You can find channels after entering the frequency parameters beforehand.

Satellite television

Setting the parameters starts with specifying the broadcast frequency. First select a signal source, then go to search. The search for channels available worldwide is automatically activated. The user can choose any option they want.

Smart TV

Connecting channels in smart TVs is similar to the standard rules. Only automatic search in smart is much easier, since this device offers to independently determine the type of signal reception. If the user decides to delete old channels, they are automatically replaced with new ones.

Automatic channel search

To activate automatic search, you do not need to use additional devices. The process itself usually takes no more than 15 minutes. To activate work:

  • Use the remote control to open the menu and activate “Broadcasts”;
  • In a new window open “Auto-tuning”;
  • Indicate the source of supply. Indoor antenna, satellite, cable;
  • In the “Type” item, select digital broadcasting;
  • Perform the transition “Mode” / “Full” / “Scan”.

The system automatically searches for available channels. At this point, you do not need to do anything yourself. You need to wait a few minutes until the process ends. The search stops after pressing the “Stop” button.

Upon completion of the search, it is recommended to test the signal quality. If there are channels that display a picture in poor quality, you can reset all settings and start searching again.

If you don’t want to repeat the steps and these channels are not needed, delete them separately. Go to Broadcast / Dispatcher. Check the boxes that you want to delete. Confirm the decision with the “Tools” button located on the remote control.

Be sure to follow the steps carefully, because when connecting automatic search, it is possible to delete channels from an already installed list.

Tvs with DVB-T2 support

Modern models with DVB-T2 support offer digital TV tuning automatically or manually. DVB-T2 is the European second generation standard. For tuning, the user does not need any additional devices, except for the antenna. In such a TV, a tuner is already arranged that catches and transmits a signal.

Tuning digital channels on your Samsung TV. Step by step guide

“How to tune digital channels on a Samsung TV?”. An actual question for users of devices of this brand. Digital TV has been on the market for several years and has not yet lost its popularity. This is logical, since after a one-time installation, the user will no longer waste time and nerves on tuning the antenna. Or constantly tune the TV to watch a different channel. This type of signal transmission involves the likelihood of heavy snowfall, heavy rain or strong winds. Long-term exposure to negative weather conditions can sometimes cause interference, but the operation does not stop completely. About connection methods and configuration methods in this article.

Detailed instructions for setting up digital television

With the widespread use of modern television, a stir has appeared, and, accordingly, there are many questions about how to set up digital television. The reason for the popularity is in the variety of channels in terms of direction, quality, language, type of content, etc. Due to the lack of information on setting up digital TV, companies have appeared like mushrooms after rain, which charge a fee for these manipulations. Pay is not at all necessary, it is really possible to achieve the goal on your own.

How to set up digital TV on Samsung

Now let’s look at a way to set up digital TV channels on Samsung, because the manufacturer is one of the most popular in the industry. Actions are similar:

  1. Click on the Menu on the remote control;
  2. Then go to the “Channel” category (on the satellite dish icon);
  3. On the right, you need to select the “Antenna” option, and in the type field. “Cable”;
  1. Now in the “Country” section you need to set “Other”, now you need to enter the pin code, by default 0000;
  1. Go to the “Auto-tuning” menu and indicate the source of the signal. “Cable”;
  1. You need to specify the parameters, they correspond to the data in the first, general example of the article, and click “Search”;
  2. Now the TV will find all TV channels.

How to set up digital television on a TV. General provisions

Mostly all methods of how to set up digital television reception use approximately the same scheme, but due to the variety of manufacturers, the actions may differ slightly, but their logic is similar. In order not to get confused in all the sequences, it is worth applying the algorithm directly to each TV model. Thanks to logic and intuition, you can correctly configure the settings on almost every TV model, using the instructions provided.

  1. Take the remote control and expand the menu;
  2. Go to the “Options” item;
  1. Next, you need to activate “Autotuning”. With this action, a window appears, which contains information about signal sources, it can be a cable or antenna signal. In our case, you need to choose a cable;
  2. At the end of the operation, information about the quality of signal reception should appear in a new window, here you should select “Digital”, then press “Start”;
  3. The final setting item is “Search Mode” and select the way of channel detection. The proposed fields must be filled in with information. Frequency. 314 MHz, speed. 6875 kS / s, and modulation. 256 QAM.

advanced TV models allow you to carry out a network search, which will independently perform all the necessary actions. When the required method of detecting TV channels is selected, you need to click on “Search”.

How to set up digital TV on LG

If this instruction is not effective, it is worth applying the detailed algorithm for LG TVs. The technique is relevant for almost all manufacturer’s models.

  1. Enter the Menu from the remote control;
  2. Click on “Options”;
  3. In the “Country” category, change the flag to Finland or Sweden;
  1. Then go to the “Settings” category and start “Autosearch”;
  2. In the fields you need to enter the search method, usually a fairly fast type, frequency. 298 MHz, modulation. 256 QAM, characters. 6952, ID. Auto;
  3. If everything is done correctly, then a number of TV channels will be displayed during the search;
  4. LG is integrating an automatic TV channel search and update system into the system. This feature can be inconvenient as the prepared list will be flushed regularly. To prevent the phenomenon, be sure to follow the settings for cable connection and turn off “Channel auto-update”;
  1. For convenient sorting, you need to uncheck the auto-numbering box in the “Cable” section in “Autosearch”.

How to set up digital TV on Smart TV

Digital TV how to set up channels on a TV with Smart function, consider the example of Samsung. The action is performed in a fairly standard way, but there are some differences.

  1. Go to the “Channel” section in the Menu;
  1. Click on “Country”, you may now need to enter a pin code, by default 0000, 1111 or 1234;
  2. Follow the section “Other”;
  3. Then, with a step back, make a choice on “Cable search parameters”;
  4. The standard parameters are now being introduced;
  1. Again you need to go to “Auto-tuning”, here select the source mode “Cable”;
  2. You need to activate the “Digital” section;
  3. Using the search mode, select “Network” and activate the setting.

All methods allow you to create a high-quality connection to digital TV channels and find the maximum available number of interesting programs. Despite the lack of data on devices from Toshiba, Philips and others, the connection method is no different.