Setting Up A Microphone On A Laptop In Windows 10
Usually the microphone does not require any special settings and works immediately after switching on. But in some situations, adjusting the microphone is still needed, for example, if it works very quietly or too phonetically.
Many users after switching to Windows 10 complain about difficulties with the sound system of the laptop and are wondering how to turn on the microphone.
Setting up a microphone (external, built-in) is simple. It is enough to carefully study the instructions and you can get a full-fledged working microphone on a laptop.
How to set up a microphone on windows 10?
The first thing to do in this situation is to try to remove it from the audio jack and reconnect. Also, you should make sure that the mechanism is connected to the correct port. Microsoft is constantly adding drivers for the most common devices to the Windows 10 installation distribution kit. Including if your microphone was released just recently, of course, its driver is compatible with “10” and updated to the latest version. But in order to finally be convinced of this, and not return to this issue, do the following:
- We go through “My Computer” in the “Device Manager”;
- We open the list of configured voice devices of the laptop, where the information on how to turn on the microphone is located.
If it does not appear, then most likely you need to reinstall or restore the standard driver for the sound card, the microphone itself
Check if there is a reddish, yellowish or blue icon near the microphone icon or sound card.
If there is an icon, then you should open the context menu and select “Enable”.
Your PC test microphone in Windows 10 was turned off programmatically, and now it works.
If the recording device is equipped with a volume control, make sure that its level is not set to the “minimum” position or that the microphone is turned off altogether by using the switch.
If the above operations did not help resolve the incident, if possible, check the accessory on another device, preferably running Windows 10.
Users often come across cases when in Windows 10 the microphone does not work correctly due to the driver, how to connect the microphone to the computer. It may not be compatible with this OS. To fix this problem, install the latest version of the software: download the driver from the manufacturer’s website with subsequent installation or update the existing one using the device manager:
- open the dispatcher, through “My computer”;
- we open “Sound, game, devices”;
- click RMB and select “Update.”;
- choose automatic search for a more suitable version of the sound driver.
- when the application detects and installs a new driver, reboot windows;
- check the performance of the microphone;
If the above methods did not help to fix the breakdown, go to the next step.
This is the use of an automatic sound problem detection tool:
- go to the “Control Panel” and open the “Troubleshooting”;
- select “Troubleshooting audio playback”;
- then click on the “Sound Recording” and “Next” windows;
- choose a microphone where you need to fix the problem.
When Windows 10 is finished scanning, information about the problem and its solutions will appear.
Click “Apply correction” or “Skip step” to further scan the system in search of errors associated with recording audio on the computer.
System Sound Configuration
We open the context menu of the icon, select “Recording Devices” and click on the “Record” tab, right-click on the free part of the window and put checkmarks in front of both items.
If a greenish icon is reflected near the device, it means it is active and ready to work in Windows 10. In another case, you need to control the microphone volume level:
- Click on the icon twice.
- Go to the menu “Levels”.
- We look so that the indicators “Gain.” and “Microphone” are not equal to zero or a value close to it.
- Now it is recommended to set the standard parameters.
If the red crossed out circle is located at the bottom of the icon, click on the speaker icon located near the value in the “Microphone” line.
How to remove noise?
Before this, how to remove the intrusive drums in the microphone so that it works correctly, you should check the device, identify its weak points.
To do this, you need:
- Enter in the search field “Voice Recording”, accept your own choice (Metro Windows 10 application).
- When the procedure is done, in the window that appears with a pointer, press the “Start Recording” button. In order to control whether the recording is made, the user needs to say a few phrases into the microphone, save the acoustic document and listen to it. If everything, what has been said is reflected normally, then it is on and absolutely working. If the acoustic document includes drums, then there are problems in the microphone, you need to check its device.
- To eliminate the problem with hum, it is necessary to configure devices through the use of special software (for example, High Definition Audio Codecs).
- Also try to remove the “Microphone Gain”, and in the “Advanced” tab, select the different “Default Formats”.