Screen not working on iPhone

Table of Contents

User methods

A large number of iPhone owners have faced problems with the camera. Sometimes errors appeared after updating the device and disappeared after the developers made corrections. But more often the problem is individual. However, most users agree on how to fix it.

Ways to fix the error

On the official Apple support page, the following guidelines are given to remove the black screen when turning on the camera:

  • Make sure nothing is blocking the lens. If the mobile device is in a non-original case, remove it and check if the camera works.
  • Force quit the Camera app.
  • Restart your device and try turning on the Camera app again.
  • Switch between the main and front cameras several times. If the display remains black when both modules are activated, contact the service center.

Of the listed methods, a separate explanation requires a forced termination of the program. To execute it:

    Double click on the Home button to bring up a list of recently used programs.

If the methods described on the Apple support page did not help you, then try the methods described by users who have encountered a similar problem: their iPhone also does not have a black screen camera.

Reset settings and content

Back up your device before performing a factory reset or content reset. Otherwise, after the reset, you will lose personal files that were stored in the iPhone memory.

  • Open the “General” section in the settings.
  • Select “Reset”.
  • Click “Erase Settings and Content”.

After the reset, restore the data from the backup and check if the camera is working.

Troubleshoot iPhone camera problems

If your iPhone is not working with a black screen, the problem may be due to a software error or hardware damage to the device. You can fix the problem yourself, but if the above methods did not help, contact the service center.

Enabling and disabling power saving mode

Power saving mode appeared in iOS 9. The device prompts you to switch to it when the battery charge drops to 20%. The mode also turns off automatically as soon as the battery is charged to 80%. Forum users report that forcing power saving on / off removes black screen when camera starts.

  • Open the settings, go to the “Battery” section.
  • Slide the Power Save Mode switch to the On position.
  • Wait a few minutes, go to settings again and turn off power saving.

If this method does not help, move on to other methods.

Hardware faults

If the listed methods do not help, you will have to climb inside the device. It is not recommended to do this without the necessary experience. The maximum that can be done in this case is to gently push the lens. If a black screen is displayed due to the lack of contact of the camera module with the ribbon cable, then this may help.

It is better to entrust the check of the loop and the camera itself to specialists from the service center. Even if there is no visible damage, simply removing and reinstalling the ribbon cable can fix the problem.

Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

How to turn off screen rotation on iPhone and iPad

You can make orientation lock in a few seconds through the main control center. The actions will differ slightly depending on the gadget model used.

For new iPads and iPhones, starting with Model 10 and XR, where there is no Home button, shutdown through the Control Center is suitable. You can call it by swiping down on the right side of the screen.

screen, working, iphone

On iPhones S, SE, 7 and 8, you need to swipe up from the bottom to open the control menu

In the menu that opens, find the “Lock” section and click on it. It is located under the group of main settings. After the icon turns red, you can be sure that screen rotation is turned off. To disable the lock, you must repeat these steps again through the control point.

The above steps will help you always use your iPad or iPhone without accidentally rotating in one orientation. The lock allows you to enjoy portrait orientation even while lying on your side, watching YouTube or using a browser.

Note! If necessary, the user can always enable or disable automatic rotation through the standard settings.

Please be aware that the iPhone display cannot be locked in landscape mode. The iPad, on the other hand, can be locked in both landscape and portrait mode.

How to disable auto-rotate on iPhone in the form of detailed instructions:

  • First, you need to unlock your iPhone to open the main menu.
  • Moving from bottom to top brings up a panel with quick access to settings.
  • By clicking on the lock icon, you can enable or disable the rotation, depending on the desired action.

After pressing the lock, the control center will display the message “Vertical orientation off”. Depending on the position of the button, the red background may light up or go out. To check the function, go to any application and turn the smartphone.

Note! If you activate the auto-rotate lock in landscape mode, the background of the display will return to vertical mode.

You can remove the screen rotation through the AssistiveTouch item. This is a common feature that users use to customize buttons for specific actions. AssistiveTouch allows you to flip the orientation in different directions in apps that support this feature.

5 Tips to fix an unresponsive iPhone screen

Note! Turn off the screen rotation lock before using AssistiveTouch.

Go to the settings and open the “Basic” item. All major smartphone options are contained here. Under the Accessibility section, there is an AssistiveTouch that needs to be activated. There is a section “Physiology and motor skills” here. Next to the “AssistiveTouch” label, activate the switch. A green slider indicates that the feature is enabled. In addition to the icon, a small gray square will appear on the smartphone screen. Next, you should exit the main settings and open any application. By clicking on the square, a menu with options will open: notifications, device and control point. Here you can activate the action of the mechanical Home button by transferring it to the smartphone screen via the “Home” option.

To open an additional menu with parameters, you must click the “Device” item. Then “Screen Rotation” is selected. As long as the lock is off, you can rotate the phone in any direction. You can click on “Right”. “Left” to switch between orientations. To close the AssistiveTouch menu, tap anywhere on the screen.

How to turn screen rotation on or off on iPhone

Screen rotation is a standard feature that works on all smartphones by default. The option is aimed at making the use of technology more convenient, especially when watching movies or working with documents. However, screen rotation on the iPhone is often turned on at the wrong moment, you have to rotate the smartphone several times to return the orientation to portrait mode. To eliminate problems while using the gadget, you need to explore options for enabling and disabling screen rotation.

How to enable auto-rotate on iPhone and iPad

Initially, the screen will rotate automatically from the very first turn on, since the settings are by default. In some programs or games, orientation rotation is not provided, so the picture will always be shown in the same position, regardless of the device settings. This is due to the application code that has been programmed to lock the turn.

Read more:  Xiaomi Mi Band Sync With iPhone

How To Fix iPhone Not Responding To Touch! (2021)

Note! In normal cases, turn inhibit must be manually activated. The action of this mode will be indicated by a special icon in the menu bar of the iPhone or iPad.

  • Open the main menu of the device.
  • Raise the curtain with notifications with a swipe up.
  • In the window that opens, find the lock icon and click on it.

As a result, auto-rotate will work again and the screen can be rotated in the required direction.

Modern iPhones have a function in the “General” section that can change the operation of the switch on the side of the gadget. By default, this button is responsible for activating and deactivating the sound. However, it can be set to “Orientation Lock”.

If the switch is in the “Orientation Lock” mode, then you cannot work with auto-rotate through the “Control Center”. In this case, all actions are carried out using the switch.

Setting screen orientation on iPhone

Screen rotation on iPhone needs to be adjusted to suit your personal preference. Not everyone likes the automatic mode, since at the slightest turn of the smartphone, the orientation of the screen changes. For example, reading a book lying on the bed, turning on its side, the smartphone screen will also unfold. It is convenient to use auto-rotate when a person often watches a video. In this case, the orientation quickly changes to horizontal and there is no need to do a series of adjustments every time. If screen rotation is off, the phone will work in one screen mode until the user turns off the function.

Note! Some apps have a separate layout for landscape orientation (mail, calendar, messages, photos).

On iPad devices, the option may work differently depending on the model. For owners of the iPad version lower than the iPad Air, you need to know that the regulation of the function is carried out through the basic settings. There is the item “Use side switch”. This section is responsible for controlling the rotation through the volume buttons. On newer models (iPad Air 2, iPad mini 4), auto-rotate can be configured through the Control Center.

Owners of smartphones version iOS from 4.0-6.0, in order to change the settings, you need to double-click on the “Home” button. As a result, the multitasking panel will appear at the bottom of the screen. Here you need to scroll the menu to the right to the button with the image of a lock and an arrow. With its help, the work of the auto-rotate is regulated.

What is screen rotation on iPhone

IPhone Auto-Rotate is an option that allows you to use vertical or horizontal screen orientation. For example, when watching movies, it is much more convenient to use the horizontal mode. Reading books and browsing social networks is carried out through vertical orientation. By default, the screen will always flip when the smartphone is tilted. This feature is not only for Apple products, but also for other devices.

What the auto-rotate icon looks like on iPhones

The action is based on a device. a gyroscope. With the help of special elements, information about a change in position is transmitted to the working area of ​​the phone. Then a pulse is read and the screen is rotated. If necessary, you can lock the automatic flip and then the screen will be in one position.

The option allows you to rotate the screen 90 and 180 degrees

Why iPhone auto-rotate screen doesn’t work and how to fix it

Auto rotate will only work when the switch is inactive. If the screen does not rebuild to landscape orientation, then the main reason should be looked for in the settings. Experts recommend to immediately check the “Control Center”, which contains the section “Blocking”.

If the rotation stopped turning on on iPhones of the Plus version, then the possible reason lies in the mode of displaying icons on the home screen. It is necessary to open the item “Settings”. “Brightness and screen”. “View”. There are two main display modes for items: standard and enlarged. The second option displays the icons in an enlarged view, and the rotation function will be disabled. Despite this, the screen will be flipped in all applications. To activate desktop rotation, open the “Standard” tab and click “Install”. The whole process will take a few seconds.

For mechanical reasons, auto-flip may not work due to damage to the gyro. This happens as a result of sharp blows, falls or shaking. The operation of the mechanism gets confused, which leads to partial or complete inoperability.

Note! Damage to the gyroscope must be eliminated by the master, since it is impossible to do this on your own.

Often the reason for the incorrect operation of the iPhone is a failure in the operating system. You can try to save the situation by rebooting your smartphone or doing a full reset. To restart, you must use the shutdown button of the device. After the screen turns off, the gadget should be launched after a few minutes and check if auto-rotate works or not.

Factory reset menu on Apple smartphones

Factory reset on iPhone means deleting all personal data on your smartphone, so before starting the process, you should back up your files, save contacts and other important information.

At the time of reset, you need to fully charge your iPhone or connect to power. Next, the settings open, the reset section is at the very bottom here. The device offers several cleaning options: delete settings, content and settings, network data, dictionary and keyboard, get rid of the data of the Home button, and also throw off location warnings.

The most common and effective method is to reset all settings. In this case, the information from the smartphone is not lost. In the section, you must confirm pressing the “Reset all settings” button with a positive answer. The whole procedure will take about 1-2 minutes. After execution, the iPhone will revert to its original settings, but the files and browser bookmarks will remain in place.

Note! Hard reset iPhone is a more radical method that allows you to completely clean your phone.

It is recommended to do a full reset not only to improve the phone’s functions, but also to clear unnecessary information. This is especially important for devices that have been in operation for a long time. After several “Erase iPhone” confirmations, data deletion begins. The smartphone will automatically shut down and restart again. After turning on, you will need activation, during which you must definitely connect to Wi-Fi and iTunes. Next, a message will appear on the screen where you need to select one item. set up a new one or restore from a copy. When restoring, all previous files will be returned, but only if a backup was created earlier. If all else fails, a flashing is done.

IPad Air, iPad 2, iPad (3rd generation), or iPad (4th generation) have a dedicated switch on the right side panel. Depending on the configured settings, this button is responsible for either locking the screen or mute the sound. You can test the rotation of the page orientation using this switch. If you fail to turn the page, then you need to change the basic settings.

Auto-rotate the screen is an indispensable feature that every user has used at least once on smartphones or tablets. Manufacturers equip this option with a technique to facilitate the use of gadgets. At any time, using the settings, you can turn orientation flip on or off, thereby adjusting the device to your actions.

The screen (display) on the iPhone does not work: possible solutions to the problem

On very rare occasions, the iPhone’s touchscreen stops working and responds to touch. You touch the display, but nothing happens. neither “tapes” nor “swipes” lead to the expected result. A freeze of the touchscreen can be caused by several reasons. software malfunction, breakdown of the display or the iPhone itself, etc. Here are some tips to help bring a frozen screen back to life.

Touchscreen not working on iPhone or iPad: wipe the display and hands

If the touchscreen suddenly stops responding to touch, first of all, wipe it well and dry your hands. Hold your iPhone up to the light and view from different angles. A build-up of grease or dirt, food stains, hand cream or lotions may be preventing the display from working properly. Take a piece of soft cotton cloth and use it to gently wipe the display to remove any dirt. For better cleaning, slightly dampen a cloth with water (water must not drip!).

Make sure your fingers are clean and dry. Wash your hands thoroughly, as a sticky finger can be the cause of a frozen touchscreen. Too dry skin of hands or calluses cannot cause malfunction, but wet or sticky fingers are another matter.

Screen freezes on iPhone or iPad: free up device storage

A freeze on the touchscreen along with a crash in applications can be caused by running out of storage space. Check if there is enough free memory on your iPhone or iPad. To do this, go to Settings. Basic. About this device. Available. If there are less than 200 megabytes left, iOS performance is noticeably reduced.

We described in detail how to clear memory on an iPhone or iPad in this article, suggesting 40 ways.

Screen freezes on iPhone or iPad: uninstall or update problematic app

Sometimes a touch screen freeze is caused by launching a specific application. In this case, the problem is not connected with the iPhone display, but with this program, which freezes and stops responding to “taps” and “swipes”. Typically, pressing the Home button solves the problem. the application closes and you return to the home screen.

Read more:  How to recover ID on iPhone

In this case, try updating this app first. Open the App Store, check if updates are available for the problematic program, and install them. If the application still freezes after installing updates, uninstall it from your device and reinstall it. If this does not help, then the problem lies in the program itself, and you cannot do anything.

IPhone display not working: restart the device using a “hard reset

If your iPhone’s touchscreen suddenly stops responding to touches, do a hard reset.

This reboot option is very simple, but the process is different for different iPhone models. In order to restart iPhone 7, you need to simultaneously press and hold the volume down button and the power button until the Apple logo appears.

To restart iPhone 6s and earlier, press and hold the Home button and the Power button at the same time until the Apple logo appears. If the touchscreen is working again after restarting the device, then the problem was caused by a software malfunction.

Doesn’t want to turn on after hitting, falling, getting wet

Many users have dropped their iPhone or missed typing. After that, the gadget may turn off. You can restore its performance after certain manipulations.

A yellow spot appeared on the screen

A rare kind of problem with the iPhone display, when yellow spots appear on it, there may be several or one of them. The iPhone display is fragile, just put it on a hard surface, and difficulties immediately arise in work.

Before proceeding, we need to clarify that the yellow spot on the iPhone screen is glue. If they appear on the new iPhone 5, 6, 7, 8, you should contact the warranty department, you should change the device without any questions. Or you can wait 2-3 months, before handling, the glue should dry and the problem will go away by itself.

  • If yellow spots appeared while using the device, for example, a couple of years after purchase, then you should think about replacing the entire screen.
  • The iPhone battery failed and began to swell, literally, pressing the screen from the inside.
  • Recent renovation, apparently not done in the best way.

Mechanical damage

  • Mechanical impact on the device body. falling or strong impact. In this case, the matrix cable could be disconnected from the connector.
  • Heating the gadget to a high temperature could damage the microcircuits and modules on the main board.
  • Liquid entering the device can also cause damage.
  • A broken adapter or power connector will not charge the battery and the screen will not turn on. Happens both in “oldies” 4, 4S, and in new models 7, 8, X series.

When iPhone won’t turn on due to full battery drain

Another reason for the iPhone to have a dark screen is when the battery is completely drained. If you used the gadget in the cold, and after that found that it went out and does not respond to attempts to turn it on, follow the following algorithm:

  • warm the device in your hands
  • connect the device to the charger
  • wait 15 minutes

After that, the download should start automatically. If this does not happen, check if the charging is working properly. It might be worth replacing it.

Fully discharged and does not want to turn on when charging is connected

A similar problem is possible with physically working components, charging failure or a broken charging cable. You need to find a working charger and use it.

It happens that the charger charges the iPhone up to 60%, and the process stops there. Over time, the cable may lose contact, and it will not be able to pass the required current. Therefore, it is worth using only original power adapters, and purchased Chinese fakes can heat up and melt during operation. This applies to car chargers (12V) and home (220V).

If the iPhone was charged with cheap Chinese adapters, then the charge controller or power controller may be damaged. In this situation, the battery simply will not be able to physically accept the charge, since the microcontroller that controls the charging will not give the command necessary for this. It is difficult to do anything here on your own, so you should contact the service center.

If a Power Bank is used to charge the iPhone, the output current should be 1A

It is also important to use original Apple wires here, since a universal mobile battery may have a too thin section, which reduces the current and voltage.

Download Reiboot

To do this, you need to download Reiboot and run this program on your system. After that, connect your device and the program will detect it automatically.

Moisture ingress

If your iPhone falls into water, you need to act immediately:

We remove the device from the water. If it has not disconnected yet, then turn it off ourselves. It is impossible to remove the battery in the iPhone, so we just wipe the gadget after water

It is important to soak up the water from the headphone and charging jack with a tissue. If you have the necessary tools and skills, we disassemble the case to speed up the drying process.

When moisture remains inside the machine, it is likely that corrosion will begin over time. If after drying the phone, it still does not turn on, then you should take it to a service center.

iPhone works, but the screen does not light up

Often, by “off”, users mean insufficient backlighting, which confuses the wizards. If your screen just glows dimly, but the picture on it is clear and the device’s response is good, increase the brightness in the settings. 100% will help if the firmware is original and correct. A non-working point for changing the backlight can be the cause of an error during the update, this is corrected by the firmware, which is also better to do in the service.

If you don’t want to contact the service for such a trifle, try resetting the settings to the factory settings, it can also help. Do not get carried away with unauthorized flashing: the same JailBreaks are capable of injecting malicious code into the system, forcing individual iPhone nodes to malfunction.

Choosing a service

High-quality service is the key to the iPhone’s work

“IPhone works but the screen is black? Our masters know what to do! ” A similar statement in different forms is found in contextual advertising and in paper advertisements, the essence is the same: to lure you as a client. Do not be fooled by discounts and free diagnostics: a licensed service takes money for diagnostics, but then deducts its amount from the cost of the service. What to look for when visiting:

By the way, services that promise “only original spare parts” are often cunning: Apple does not have original spare parts, there are high-quality Chinese counterparts. The paradox is that phones are repaired with the same parts from which high-quality replicas are assembled. After handing over the device, do not forget to take the certificate of acceptance of the equipment for repair, in which the identifier of your iPhone must be indicated.

IPhone has blanked out screen, but it works. what to do

If the iPhone does not have a screen, not all owners know what to do, but meanwhile the question is very, very relevant: the cost of the display is high, so replacing it unknowingly can lead to unnecessary expenses. To avoid this, it is important to know two things: the reasons for the occurrence and how to fix the problem without harm to the phone.

Screen stopped working on iPhone 4

Before rushing about in panic and looking for advice wherever possible, check if your device is frozen. Yes, Apple devices almost never freeze, which is why this phenomenon is mistaken for a breakdown. The non-working screen in this case is easily corrected by rebooting (holding the shutdown button and sleep / home). If this helps, but it is repeated often, immediately contact the service. the screen is in order, but the system itself or the components are “naughty”. they need to be repaired.

IPhone Screen Blank Is Alarming

If the restart did not help or the apple symbol does not appear, go to the next step. Another reason why the screen on the iPhone 4 does not work may be its Chinese origin: non-original equipment breaks down very quickly, not to mention the fact that its repair exceeds, but then go broke on replacements.

Screen does not work on iPhone 4s after flooding

Having “expiated” your device, you run the risk of finally ditching it, so do the following as soon as possible:

  • Turn off your phone;
  • Disconnect the battery (you need a screwdriver for small screws, it is screwed on);
  • Wipe off any visible water;
  • Place iPhone in a container of rice and leave for 24 hours.

After that, the device can turn on, but it’s better not to risk it and contact the service. Instead of rice, you can use a hairdryer or a special cover, but in the case of a hairdryer there is a risk of damaging the insides and finally “killing” the device, and in the second case, the price of a cover may be higher than the price of repair from honest craftsmen.

IPhone 4 screen not working: what to do

Check the battery charge before disassembling

The first thing to start diagnosing with is checking the charge level. Oddly enough, one of the reasons people turn to Apple services is banal forgetfulness: a completely discharged phone may not turn on even when working from charging, which people who are especially prone to panic perceive as a breakdown.

Read more:  How to Backup Iphone In iTunes

If charging is okay, check your iPhone. It does not show the screen, but everything else works. you should think again if you or anyone else has ever poured the device, because the remaining moisture is insidious and hurts the entire device slowly, even if it worked before. There were no such cases? Well, you are a very neat user, so the reason that the iPhone‘s screen stopped working, the sound is there, and the calls go through, is either a breakdown of the screen as a whole, or a loose cable.

Having experience in assembling and disassembling complex electronic devices, you can independently disassemble your iPhone and check the reliability of the loop fastening, but remember: if the phone has a guarantee, this should not be done, then any service will withdraw the warranty due to opening.

There is no guarantee. there are no fears, you can check. In the case of a correctly looking cable, it is better to take the iPhone for examination. Advice for owners of CRT TVs and screens (if there are any): do not put the device on them, the screen does not work for the iPhone 4c after a long lay. Either charging with reboot or service helps. The effect of the CRT on the iPhone screen is palpable.

iPhone under warranty

You have a warranty iPhone 4s, the screen does not work, you do not know what to do. refer to the Apple website with a question. If the phone is not stolen, not overbought from another customer, or has not been exposed to the outside from your side, then Apple engineers will be happy to help you, because the high price includes a cool warranty service.

The site will help you determine the position of the nearest licensed service, tell you what to take with you, and also warn you against self-repair. Remember: during the warranty period, any damage not related to drowning or mechanical damage is a service problem, not yours. Do not be afraid, the masters will be happy to help you, especially if you are polite to them.

What to do when your iPhone is on but the screen is black.

Even the highest quality smartphones periodically fail. any user can suddenly face such a problem as a black screen on the iPhone. You have rebooted your iPhone, connected it to the charger, and your iPhone screen is still black, take your time to get upset. Perhaps, restoring the device is not as difficult as it seems at first glance. Various breakdowns can lead to the appearance of a black screen, which in some cases can be eliminated by yourself.

In this article, we’ll explain why your iPhone screen won’t turn on and what you can do to fix it.

When iPhone won’t turn on due to full battery drain

Battery is completely drained. Another reason iPhone has a dark screen is when the battery is completely drained. If you used the gadget in the cold, and after that found that it went out and does not respond to attempts to turn it on, follow the following algorithm:

  • warm the device in your hands
  • connect the device to the charger
  • wait 15 minutes

After that, the download should start automatically. If this does not happen, check if the charging is working properly. It might be worth replacing it.

Why does iPhone have a black screen

Black screens on iPhones can be for a variety of reasons, from hardware glitches to firmware issues.

Screen freezes when software crashes, what to do?

A black screen is usually caused by a hardware issue with your iPhone, so it is usually not a quick fix. The first thing to try to solve this problem. this apply a hard reboot

To perform a hard reset, press and hold the Power button and the Home button (round button below the display) at the same time for at least 10 seconds. Live until the Apple logo appears on the screen.

On iPhone 7 and 7 Plus, you need to do a hard reset by pressing and holding the Volume Down and Power buttons at the same time until the Apple logo appears.

On iPhone 8 and 8 Plus, X, you need to press and quickly release the Volume key, then press and quickly release the Volume button, hold down the Power button until the Apple logo appears.

If the Apple logo appears on the screen, chances are there is no problem with your iPhone. it was a software glitch. Read on for what to do if the Apple logo doesn’t appear on the screen.

Typical reasons why the iPhone screen won’t turn on:

  • If the phone is dropped on a hard surface or other mechanical damage that can damage the display, the flex cable may come off.
  • Full discharge of the smartphone, which can lead to the fact that the “apple” device stops functioning. vibrate, transmit signals, show an image of an apple, etc.
  • There is a bug in a specific application. In this case, the display darkens when you enter this application.
  • A failure occurred during the download phase of updates. At the same time, the apple icon is constantly on the screen and nothing else happens.

IPhone screen not responding to touch

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

The reason that the iPhone screen does not respond after touching your finger may be moisture, dust, or mechanical damage. The main indicator of a malfunction of the touchscreen is a partial response of the touchscreen to pressing or random typing. In some cases, on an iPhone, the screen does not respond to touch because the smartphone is frozen. By following a series of procedures, you will be able to determine why the display is performing poorly.

Common causes of breakage

Most often, the iPhone screen does not respond to the touch of a finger after a fall, liquid penetration through cracks or due to other mechanical damage. The following defects are quite rare causes of problems:

  • touchscreen wear
  • high load of RAM (iPhone screen stopped responding, and buttons do not respond because the phone is frozen)
  • iPhone system malfunction (smartphone does not respond to button presses)
  • overheating of iPhones (in such cases, part of the screen does not respond to touch)

It is easy to determine the presence of problems in the operation of the sensor, the following failures are observed:

  • partly or completely unresponsive to iPhone touch
  • in certain parts of the display, the iPhone screen freezes when you touch your finger
  • the screen responds with a delay to touch
  • pages are flipped incorrectly
  • the sensor stopped responding to touches and spontaneously types text

To avoid problems with iPhone displays due to mechanical damage, the manufacturer recommends gluing glass or film to the surface of the screen.

What to do if the sensor stops working

If your iPhone screen stops responding, you don’t always need to replace the display. In some cases, you can independently determine the cause of the problem and fix it. First, eliminate the possibility of damage to the case or screen surface.

If the internal components break, only a qualified technician can repair the iPhone.

If iPhone screen freezes, follow these steps:

  • use the power button to reboot the device (hold the button for a few seconds)
  • remove unlicensed software from iPhone
  • reflash the device

If, after performing such actions, the iPhone screen freezes, and there is no reaction to pressing the buttons, you must perform a complete restart of the device. To do this, you need to simultaneously hold the “Home” and “Power” buttons for 20 seconds. Then the smartphone will erase the RAM and restart the phone.

If after that part of the screen or the entire display still does not respond well to finger presses, the sensor needs to be replaced.

Installing a new display module

The iPhone screen cannot be replaced separately from the sensor or touchscreen. If the display does not respond well to pressing due to damage, then a new module needs to be installed. The exact cause of the malfunction can be identified by qualified specialists using computer and mechanical diagnostics. Wizards will accurately determine why the smartphone is frozen, the device does not restart, or part of the screen does not work.

If the sensor does not respond well to touch or stops working altogether, and the programs do not respond to button presses, then contact the performers Yuda. Specialists will efficiently and professionally install new display modules on iPhones of all generations.

  • fast and accurate mechanical and computer diagnostics of the device (they will accurately determine why a part of the display does not respond to pressing)
  • complex repairs using original spare parts
  • troubleshooting at home or in a service center at a convenient time for you

Technicians also provide additional services, such as replacing buttons or worn parts of the phone.

4 Ways to Fix iPhone Touch Screen not Working | iPhone Screen not Responding to Touch |iPhone Repair

Experts will quickly diagnose and find out why the iPhone screen is not responding, after which, in accordance with the manufacturer’s recommendations, they will fix the breakage and fix the iPhone.