Screen mute when talking Xiaomi

Lock Screen When Talking Xiaomi Redmi. Xiaomi Repair

screen, talking, xiaomi

Navigation menu

Why does the screen lock work when talking on Xiaomi Redmi?

  • Why does Xiaomi turn off when I lock the screen while talking on the phone? Is it possible to eliminate this defect, otherwise it is completely impossible to use the device.
  • Please tell me. Is it possible to remove the lock button from the screen on Xaomi?
  • There is not enough time for active work of the Xiaomi screen. How to change Xaomi’s screen lock time, someone changed this setting? Thanks in advance.

Lock screen when talking Xiaomi Redmi

Modern telephones are complex multifunctional devices, in the design of which there are many different individual modules. Sometimes their setting is violated, which makes it impossible or inconvenient to use the device. So, for example, sometimes the screen lock starts to work ahead of time when talking about Xiaomi Redmi. This is inconvenient, as it brings certain difficulties and discomfort. It is logical to find out why this is happening and how to fix the problem.

This function is optional, so it can be safely and painlessly disabled. But it exists for a reason. It saves battery power when the screen is not needed, that is, when talking, because it is still covered by the user’s cheek. As you know, the screen consumes the most energy, so it will be correct to fix the problem.

The proximity sensor is responsible for turning off the screen backlight. It is implemented on a smartphone with a small hole in the body with a peephole. There is an optical sensor inside that registers an obstacle and turns off the backlight. It has a number of settings that you can change.

Consider the main reasons for contacting a service center:

  • The screen does not go out when approaching an obstacle. In this case, is it worth checking if it is enabled? This can be done in the settings in the “Screen lock” item. It is also recommended to disable the “Lock in ” function there, as they are not compatible.
  • If the option is enabled, and the sensor does not work anyway, then the matter is in the firmware. It needs to be updated to the latest version. If the sensor is triggered too early or the screen blinks, then the sensor needs to be adjusted. This can be done through the engineering menu. To do this, press 7 times in the “About system” settings tab according to the kernel version. The service menu will open, where you need to find the item Proximity Sensor Test.
  • During the test, close and open the proximity sensor with your finger several times in a row. The value on the screen changes for a long time from 5 to 0.
  • For the correct adjustment of the proximity sensor, the phone must be placed on a horizontal surface with the screen facing up. At the same time, direct sunlight should not fall on it. After that, you must press the Calibration button.

At the end of the locking process, exit the service application and check the sensor.

Turning on the proximity sensor

  • First, go to the “Challenges”. In the lower left corner there will be “three stripes”, click on them.
  • We are redirected to a standard page with all the items for detailed customization. Click on the section “Incoming calls”.
  • Now we look at the inscription “Proximity sensor”. The slider is blue? This means the function is activated. and the sensor does not work for other reasons. If the slider is gray, just move it to the “On” mode.

Disable accidental keystroke prevention (MIUI 9)

This item will work on older MIUI versions. MIUI 10 moved the function to “” mode.

The situation here is almost the same. The screen turns off when the sensor does not detect the arrival of light. For example, in the same. the display will not function.

But sometimes, even when in the owner’s hand, the phone does not respond to touch, and Face ID does not work. In such situations, disabling the function is required. To perform this operation, you need:

  • Go to Settings and visit the “Lock screen and password” item;
  • Go down to the “Advanced” tab;
  • And uncheck the box in front of the section “Preventing accidental clicks”.

How to disable TalkBack in redmi 3s prime, redmi note 4, 2s Prime, mi 4i, redmi note 3, mi 5i, Y1

Note! The sequence of points may differ slightly depending on the MIUI version and phone model.

The proximity sensor is an important part in a smartphone, without which a comfortable phone conversation or moderate screen brightness is impossible. But, unfortunately, this sensor sometimes starts to work incorrectly. Therefore, many are interested in how to calibrate the proximity sensor on Xiaomi, returning it to its normal working state.

Instructions for calibrating the proximity sensor on Xiaomi

If the above actions did not have any result, there is only one way out. to calibrate the proximity (light) sensor. On Xiaomi smartphones, this is a fairly quick and easy procedure, but still be careful.

Visit to the service center

And the last option for solving the problem is to visit a service center. Experts will carry out diagnostics and possible disconnection of the sensor, after which a new sensor can be installed. If the smartphone is under warranty, the repair will be completely free.

MIUI version change

If you are an experienced user with good technical skills, you should try upgrading. Low-quality software, such as “Vietnamese” firmware or custom curves, often causes bugs and glitches of certain options.

The best option is to install the Global Stable ROM. Yes, and such shells have some drawbacks, but the stable and well-coordinated operation of the phone is ensured.

What is Proximity Sensor

You’ve probably noticed that during a call, the screen turns off completely and does not respond to accidental presses and touches. Thus, the user does not disconnect the current call with his ear, does not open the keyboard and does not switch to speakerphone. It is very convenient. In addition, when the display is turned off, battery power is significantly saved.

This simple function is called a proximity sensor. The sensor detects physical proximity of the device to any object, and the screen automatically fades.

But where is the proximity sensor, and what exactly is it? You can notice the detail on the front panel of the device near the front camera. It looks like a small round element.

How to turn on the proximity sensor?

How to turn on the proximity sensor in the phone?

  • We go to the “Challenges” of the gadget.
  • Go to the “Settings” of calls (long or regular press on the button of the functions of the gadget or on the touch display the button “Settings”).
  • Click on the section “Incoming calls”.
  • We move the switch or put a tick next to the item “Proximity sensor”.

Why the screen does not lock when talking on iPhone?

The proximity sensor is responsible for the function of dimming the iPhone screen during a call. It fires when something covers it. During a conversation, this “something” is the person’s head, to which the iPhone is brought. Thus, if the iPhone screen does not turn off during a call, the proximity sensor is to blame.

Where is the proximity sensor in the phone?

The proximity sensor is located at the top of the smartphone. As a rule, it is placed next to the front camera lens. On some devices, the sensor is visible to the naked eye, and on some it is not so easy to detect it.

Why does the screen go blank on the phone?

Why does my mobile phone screen go blank?

The main reason for its introduction is the need to preserve the discharge of the battery, which the working screen is actively discharging.

How to Disable Xiaomi Screen Off?

So, in order to change the screen backlight time, you need to do the following:

  • Enter Settings:
  • Now scroll down a bit to the System and Device section.
  • Select Lock & Protect:
  • In the Lock screen section, tap on the Sleep mode item:
  • Select the time after which the screen will turn off:

Why does the screen turn off on the phone?

In the normal state, the phone screen is automatically turned off when it is brought to your ear. Provides this function with a proximity sensor that reacts to blackout of a part of the screen during a call or conversation.

How to enable iPhone proximity sensor?

press and hold the Sleep / Wake button and the round Home button at the same time for at least 10 seconds. When you see the Apple logo, release both buttons. boot into iPhone with PIN, then the proximity sensor can work properly.

How to turn off the screen when talking on Xiaomi?

  • Then go to “System Applications”.
  • Tap on the line “Phone”.
  • Select “Incoming Calls”.
  • Turn on the proximity sensor if it’s off.
  • If the sensor is on, turn it off and on again. This should help. If it doesn’t help, check out this article.

How to check if the proximity sensor is working?

To check the Android proximity sensor using the engineering menu, you need to enter the combination ### in the dialing menu. In the menu that opens, select the Hardware Testing tab, then select Sensor and click Light / Proximity Sensor.

How to lock the screen during a call?

Turn on your smartphone, go to “Settings”. “System Applications”; Scroll through the applications menu to the item “Phone”; We select the item “Incoming calls”; Disable the proximity sensor (uncheck the box “Turn off the screen automatically when you bring the phone to your ear during a call”) in this menu.

How to lock the screen while talking on Xiaomi?

In the settings “Incoming calls” on Xiaomi, we find and select the item “Proximity sensor” under which it will be written (turn off the screen automatically when you bring the phone to your ear during a call) and turn it on.

How to turn on screen lock during a call on iPhone?

  • Open iOS Settings and go to the “General” section.
  • Select “Auto-lock”.
  • Set the time interval. By default, the minute should be selected, but you can set it less. The main thing is not to select the “Never” option. it is because of it that the screen does not go out after the notification appears.

Why the screen does not lock during a call?

If your Android device does not turn off during a call, or the screen does not turn on after the call ends, then the problem should be looked for in the sensor’s operation. The reasons may be as follows: Poor visibility (covered / covered with a protective film or cover). Out of RAM.

Why the screen does not lock when talking on iPhone?

The proximity sensor is responsible for the function of dimming the iPhone screen during a call. It fires when something covers it. During a conversation, this “something” is the person’s head, to which the iPhone is brought. Thus, if the iPhone screen does not turn off during a call, the proximity sensor is to blame.

How to turn off screen off on Xiaomi?

So, in order to change the screen backlight time, you need to do the following:

  • Enter Settings:
  • Now scroll down a bit to the System and Device section.
  • Select Lock & Protect:
  • In the Lock screen section, tap on the Sleep mode item:
  • Select the time after which the screen will turn off:

How To Fix Screen Off During Call in Xiaomi/Redmi/Mi/Poco | Screen Off During Call problem Solved

Why does the screen go blank on the phone??

In the normal state, the phone screen is automatically turned off when it is brought to your ear. Provides this function with a proximity sensor that reacts to blackout of a part of the screen during a call or conversation.

How to turn off screen off during a call?

Turn on your smartphone, go to “Settings”. “System Applications”; Scroll through the applications menu to the item “Phone”; We select the item “Incoming calls”; Disable the proximity sensor (uncheck the box “Turn off the screen automatically when you bring the phone to your ear during a call”) in this menu.

Why does my phone screen go blank while watching a movie??

The screen goes out for this very reason. the wrong settings for the sleep mode, which is adjusted in such a way as to respond to the user’s touch. While watching a particular video, a person simply does not touch the phone, that is, does not touch the display.

How to disable the proximity sensor Xiaomi Redmi Note 9 Pro?

In this case, Redmi Note 9 is the most affected, as a message appears on the screen as if we were constantly covering the sensor. Fortunately, the solution is simple, basically we need to go to Settings Lock screen and select Mode to turn it off.

How to disable MIUI 11 proximity sensor?

To do this, open the “Phone” application and hold down the left touch key in the form of three horizontal stripes. In the menu that opens, go to Incoming calls Turn off the screen during a call (proximity sensor).

Why the screen does not go blank during a call?

If your Android device does not turn off during a call, or the screen does not turn on after the call ends, then the problem should be looked for in the sensor’s operation. The reasons may be as follows: Poor visibility (covered / covered with a protective film or cover). Out of RAM.

How to turn off screen off when calling Xiaomi?

  • Then go to “System Applications”.
  • Tap on the line “Phone”.
  • Select “Incoming Calls”.
  • Turn on the proximity sensor if it’s off.
  • If the sensor is on, turn it off and on again. This should help. If it doesn’t help, check out this article.

How to Enable or Disable Proximity Sensor in Redmi Note 7 Pro(MIUI 11.0)?

How to check if the proximity sensor is working?

To check the Android proximity sensor using the engineering menu, you need to enter the combination ### in the dialing menu.

How to remove screen blackout on a call?

How to turn off the proximity sensor on Android?

  • Turn on your smartphone, go to “Settings”. “System Applications”;
  • Scroll through the applications menu to the item “Phone”;
  • We select the item “Incoming calls”;
  • Disable the proximity sensor (uncheck the box “Turn off the screen automatically when you bring the phone to your ear during a call”) in this menu.

Why doesn’t the screen go blank during a call?

If your Android device does not turn off during a call, or the screen does not turn on after the call ends, then the problem should be looked for in the sensor’s operation. The reasons may be as follows: Poor visibility (covered / covered with a protective film or cover). Out of RAM.

How to turn on screen lock during a call on iPhone?

  • Open iOS Settings and go to the “General” section.
  • Select “Auto-lock”.
  • Set the time interval. By default, the minute should be selected, but you can set it less. The main thing is not to select the “Never” option. it is because of it that the screen does not go out after the notification appears.

What to do if the screen does not light up when you call?

  • Go to the “Settings” menu. Ringtones & Volume (Sounds & Notifications) and select the Notifications tab.
  • Check the item “Notifications on the lock screen” and, if necessary, enable it.
  • Next, go to the “Application notifications” settings and find the Phone app.

Reconfigure the screen lock when talking on the phone

To do this, go to general settings, find the “Applications” item. Now select “System Applications”. Find the Phone app in the list. Enter the “Incoming calls” menu. Make sure the Proximity Sensor function is active on your Xiaomi. If it is turned on, but the screen does not turn off, turn off, restart Xiaomi, then turn on and restart again. In most cases, this procedure solves the problem.

If you did a double reboot, but the screen does not turn off during a conversation, you will need to test the sensor to determine if it is in working order, and then, if it works, calibrate.

Yes, I almost forgot, the operation of the sensor that blocks the screen when talking to Xiaomi is affected by protective glass or film, some of which make its normal operation impossible. If you have performed all the magic rituals, and the function still does not work, but additional glass is glued to the screen, try to remove it and try the function again.

GPS not working on Xiaomi (Redmi), how to fix?

This can be helpful:

Hi, my name is Timur. Since childhood, I have been fond of computers and the IT Industry, I like it, this is my passion. Over the past few years, I have been deeply interested in Xiaomi: ideology, technology and a unique approach to explosive business growth. I own many Xiaomi gadgets and share my experience of using them, but most importantly. solving problems and incidents that arise under unexpected circumstances on the pages of Mi-check.ru

The screen does not lock when talking on Xiaomi (Redmi)

Each Xiaomi (Redmi) phone has a built-in proximity sensor, which is of two types:

  • Optic;
  • Ultrasonic.

It is located at the top of the phone, usually next to the earpiece.

It is the sensor that determines whether you brought the phone to your ear to speak, and gives a signal to lock the screen and the touch panel to prevent false alarms.

Before jumping into deep conclusions, let’s check if the display lock function is turned on, or if it was accidentally turned off.

Xiaomi Charge Indicator (Redmi). How to set up on Android 10

Just turn off the double-tap unlock function and the problem will be solved. During a call, you touch the screen twice (with your cheek in my case) and the phone will unlock, while talking, you find that the rest of the buttons are pressed (again with your cheek) because the phone is unlocked by double pressing. I am using Xiaomi Mi 10T. There was no such problem on Mi 8, I think because of the more compact dimensions. Relevant if this function is enabled for you.

Note. Xiaomi Mi Note 10 Lite phone. The problem was solved by disabling the active screen. Now, when making a call, it is possible to separately lock the screen with the on / off button of the phone. Single press.

The sensor calibration option described above is not suitable. The sensor can only be seen through the engineering menu.

Turn off the screen automatically when you bring the phone to your ear during a call

Why doesn’t the screen go blank on the phone when I put it to my ear? In this article, you will find information on how to enable the screen lock during conversation in the Xiaomi settings. If on your Xiaomi smartphone with an incoming or outgoing call, the screen stopped dimming and locked when you bring the phone to your ear, then you may have disabled this function in the Android settings. This could have happened completely by accident and you simply did not notice, or your children went through the phone settings and turned off the proximity sensor.

In our example, we will show how to turn on the proximity sensor on Xiaomi Redmi 4X so that when you bring the phone to your ear, the screen is locked and turned off. Perhaps the information will apply to other Android smartphones and tablets.

To automatically lock the screen on Android when brought to your ear, you need to do the following. We open the “phone” icon on Xiaomi and get to where we usually dial the number to call. Next, click on the touch button “menu” in the form of three horizontal stripes. (On some Androids, after opening the “phone”, the “menu” can also be opened with a touch button in the form of three stripes located under the screen on the left side. icons and buttons.

Next, in the menu window that opens on Xiaomi, select the item “Incoming calls” under which there will be a short description of possible settings (additional settings for the behavior of the device for incoming calls).

In the “Incoming Calls” settings on Xiaomi, we find and select the item “Proximity Sensor” under which it will be written (turn off the screen automatically when you bring the phone to your ear during a conversation) and turn it on. Done, now when you bring the phone to your ear, the screen turns off and locks, thereby preventing accidental taps and touches of the touchscreen.