Samsung Galaxy tab won’t turn on

Table of Contents

Galaxy Tab A won’t turn on. # 5: check the charging port

Another common reason a Galaxy won’t turn on is a lack of power, and that’s because there’s something about the charging that prevents it from charging. If possible, try checking the charging port with a magnifying glass. If you see dirt, lint, or a foreign object inside, this is probably the reason the battery is dead. Use a can of compressed air to blow away dirt or lint. Do not insert anything inside to avoid damaging the system.

Sometimes corrosion or the presence of water or moisture can block charging. Be sure to dry your phone thoroughly, especially the charging port. If you think the port is wet, do not use compressed air to dry it out, as this may cause moisture to penetrate inside. Instead, just let the water drain for a few hours. Water usually evaporates after a few hours.

Another possible reason the charging port might not work properly is damage or bent pins. Try looking at the inside of the port with a magnifying glass. If you see a bent or damaged pin, contact Samsung to have your device repaired.

Galaxy Tab A Does Not Include Fix: Check For Hardware Damage

If the device has never been physically damaged, continue troubleshooting.

samsung, galaxy, turn

How To Fix Galaxy Tab A Won’t Turn On | No power or no response

If your Galaxy Tab A won’t turn on and you’re not sure why, there are a number of factors you need to consider. In this post, we will show you possible solutions that you can try so that you can identify and fix this problem.

Galaxy tablet won’t turn on?

3 steps to fix your phone with Reiboot, no data loss, FREE

  • Click to download
  • Connect to your device
  • Fix all phone problems

How To Fix Galaxy Tab A Won’t Turn On | No power or no response

One of the common problems faced by many smartphone users is the problem of no power supply. If you have a Galaxy Tab A that won’t turn on, this troubleshooting article is likely to help. Find out what to do if you don’t know how to fix this problem.

Galaxy Tab A does not include fix: restart your device

Your Galaxy Tab A may be unresponsive or freeze during this time. Try removing the battery to see if you can defrost it. Here’s how to do it:

  • Press and hold the power button (top right, top of the volume rocker) and the volume down buttons until the service download mode screen appears (approx. 10 seconds).
  • On the Serviced Boot screen, select Normal Boot. Use the volume buttons to cycle through the options available and the power button to select. The whole process can take up to 60 seconds.

If the device does not turn on, press and hold the power button for 5-10 seconds.

Note. If the device turns on but does not hold a charge, turn the device off and on again, then fully charge and retest.

Galaxy Tab A does not include a fix: use a different set of charging accessories

Chargers can fail, just like phones. If your Galaxy Tab A still won’t turn on after leaving it charged for 30 minutes, the next step is to test that the charging cable and adapter are working properly. If you can borrow another set of Genuine Samsung accessories, we strongly recommend that you do so. The point is to check if the USB cable and / or adapter is the reason the device won’t charge. If possible, try purchasing a cable and adapter for your device rather than any other Samsung tablet.

If nothing changes after doing this, proceed to the next troubleshooting steps below.

Galaxy Tab A won’t turn on. Fix: Charger

If your Galaxy Tab A won’t turn on after normal use and without problems before, there may be an easy solution. just charge it. The lithium batteries may be discharged and the device may not turn on even if it is not fully discharged. To test, charge your phone for at least 30 minutes before trying to turn it on again. This should be enough to charge the battery and turn the device back on.

If you’re having a problem with your favorite outlet, try plugging the charging adapter into a different outlet. This should eliminate the possibility that the socket will not charge the phone.

In some cases, continuous charging can help. Recharging is charging your device when connected to a computer. It takes time, but sometimes it can fix devices that are not charging normally. Often fully discharged devices are recovered after 45 minutes to 2 hours using this continuous charging method. After restoring your device, finish charging by plugging it into a power outlet.

When connected to a wall charger, press and hold the Power, Volume Up and Volume Down buttons for 1 to 2 full minutes. This process can help turn on the device when only the power button cannot be pressed.

How to restart or shutdown a frozen Samsung Galaxy tab 3 that does not respond to any actions.

In this article we will see what to do if Samsung Galaxy Tab 3 freezes and does not respond to any actions, how to turn it off or restart it. The more technologically advanced a smartphone or tablet, the more likely it can freeze or slow down, and as we noticed, users of the Samsung Galaxy Tab 3 also face this problem. Any device periodically needs to be rebooted, and the more it works, the more it can be. and errors in the work of the android. Also, Galaxy Tab 3 may freeze on several simultaneously running applications and games, perhaps there is not enough RAM or a virus may slow down the tablet or whatever. In any case, it is recommended to reboot the device at least occasionally and then the probability of freezes will be less.

Now let’s see what to do if Samsung Galaxy Tab 3 is frozen and does not react to anything. Let’s try to force restart the tablet by pressing certain buttons. You can try to start by simply pressing and holding the on / off button of the tablet if the menu with the option to turn off does not appear, then we will try to forcibly restart the Galaxy Tab 3. You can also try to wait until the battery runs out if there is not much charge, if the battery charge is almost full and reluctance to wait, then below there is a way to reboot a frozen Samsung Tab 3 through the tablet buttons.

To forcibly restart a frozen Samsung Galaxy Tab 3, press and hold the “off” and “”. “buttons at the same time, hold down the three buttons for a few seconds (about 7-8 seconds). For those who do not understand which buttons you need to press and hold for 7-8 seconds, this is the “power key” and the volume rocker on both sides. If everything is done correctly, then Galaxy Tab 3 should reboot and work normally.

And of course, do not forget to periodically reboot your tablet to correct errors in the android. If the method does not help, then the problem is more serious or try several times. Good luck.

How To Fix It When Galaxy Tab S7 Won’t Turn On | Samsung tablet won’t turn on

In this troubleshooting guide, we’ll show you what to do if your Galaxy Tab S7 won’t turn on or respond. In most cases, this problem occurs due to a minor issue with the firmware, and you do not need to follow complex procedures to fix it.

When an Android tablet or smartphone shuts down on its own and in most cases won’t turn on anymore, the problem could be a very minor firmware issue that you can fix yourself by following some basic troubleshooting procedures. That is, if there are no visible signs of physical damage or liquid damage on your device.

If so, then it is more likely that your tablet has hardware problems, and if so. The point is, there is just so much you can do about it. Right now, you should consider having your device checked by a Samsung technician to see how serious the problem is and if you can fix it.

But assuming that your Tab S7 just shut down on its own and couldn’t turn back on anymore, then the following solutions might help you get it to react again.

In this post, we will tell you what to do if Samsung Tab S7 won’t turn on and won’t respond. You only need to complete one or more procedures to determine the cause of the problem and hopefully fix it. So if you are one of the users who have this problem with Samsung tablet won’t turn on, you need to do the following:

Force restart your Galaxy Tab S7

In most cases, a device that shuts down and no longer responds has what we often refer to as a “firmware glitch”. This happens from time to time, but it is not really a serious problem. In fact, you should be able to fix it simply by doing a forced restart.

This is a simulated battery extraction that forces your device to shut down or power on again. If you have low-tech phones, a forced reboot is equivalent to removing the battery to “drain” the device and putting it back in. In most cases, this procedure will cause the device to react again. But since the Tab S7 has a non-removable battery, you won’t be able to pull it out. Instead, you need to do the following:

  • Press and hold the power button and volume down button at the same time for 10 seconds. This will force your tablet to turn on.
  • When the logo appears, release both keys and wait for the reboot to complete.

The moment the logo appears on the screen indicates that the problem has already been fixed. often than not, this is the only thing you need to do with a device that won’t turn on. However, if after following this procedure the issue is still not resolved, continue to the next solution.

Charge your device and perform a forced reboot

If the Tab S7 is still not responding even after doing the first solution, it might be merged. battery. In most cases, a dead battery is not a problem because your device will respond immediately as soon as it is connected to the charger. However, there are times when the firmware crashes if you let your device run out of power. As a result, you’ve already run into a couple of minor issues that are causing your Samsung Galaxy device to stop responding. Here’s what you should do about it:

  • Plug the power adapter into a working wall outlet, plug your device into a charger and use the original cable for charging or data transfer.
  • Whether the charging icon is displayed or not, leave the device connected to the charger for a few minutes.
  • After that press the power button and hold it together with the volume down key for 10 seconds.
  • If the logo appears, release both keys and wait for your Samsung Galaxy Tab S7 to finish restarting. However, keep holding the buttons a little longer if they still don’t respond after 10 seconds. There are times when it takes more than 20 seconds for the Galaxy to respond.
Read more:  Smart TV Samsung no picture

When it comes to repairing devices that won’t turn on until there are visible signs of physical or fluid damage, these two procedures are all you need to do to get your device working flawlessly again. You can also boot the table in Safe Mode if you like. Running it in recovery mode and clearing the cache partition can also help.

You can start it in Safe Mode by turning off your tablet. You can turn it off by pressing the power button for at least 30 seconds. After shutdown, press the power button again to turn it back on. When the Samsung logo is displayed, press and hold the volume down buttons until the lock screen appears. You should see that the lock screen displays Safe Mode in the lower left corner of the screen.

To start it in recovery mode, turn off your tablet, then press and hold the power and volume up buttons. together with the Home key. When the Android logo appears, release the Home, Power and Volume buttons. Press the Volume Down key to select Clear Cache Partition and use the Power button to select. You can also perform a hard reset using the same procedures. Just select Wipe Data / Factory reset in recovery options.

Be sure to back up your files using the Samsung Switch app downloaded to your laptop or PC. Just connect your tablet with a USB cable and follow the onscreen instructions.

samsung, galaxy, turn

However, if it still won’t turn on after following these procedures, there may be a more serious hardware issue. this should be fixed by tech. And with that, you need to bring your Samsung Galaxy Tab S7 to high tech.

We hope this troubleshooting guide helps you one way or another.

Please support us by subscribing to our YouTube channel. We need your support so we can continue to post more useful content in the future. All rights reserved.

  • How to Create Simple Video Slideshows on Samsung Galaxy Tab S6
  • How to Share Video Files on Samsung Galaxy Tab S6 via Gallery App

Check charger and cable

Perhaps your Samsung smartphone is dead and won’t turn on. You plugged in the charger but nothing happens. First of all, try to take charge from another gadget, and if the phone reacted to it and began to receive a charge, then the problem is in it. The next step is to change the USB cable to determine what exactly stopped working. If, after replacing the wire, your charger began to charge the smartphone battery, then the reason is its malfunction.

Samsung tech support tip

Following the advice of Samsung technical support, we suggest trying the following very effective way to restore your mobile phone to work:

  • Press and hold the “Volume Down” and “Power” buttons
  • Hold them for 7-12 seconds
  • If after that your device started working, then a very common failure occurred in its operation.

If the problem persists, then move on to the next solution.

Samsung Galaxy won’t turn on. we restore the work of the smartphone

Sometimes Samsung Galaxy smartphones or tablets may stop turning on for no reason. The Android operating system crashes, but most often users have problems due to the pre-installed ROOT rights. Now you will learn how to revive the device, if, of course, this is not a hardware failure.

There are several ways and we will start with the most obvious and simple ones.

Clearing the cache

Formatting the phone memory partition that stores the entire cache.

  • Enter the recovery by holding the “Volume up” and “Power on” buttons on the switched off device until an inscription with the name of your phone model appears on the screen
  • After starting the recovery, using the volume buttons, select “Wipe cache partition” and then press the power button to complete the process
  • When finished, select “Reboot system now” by pressing the power button.
  • The attempt was unsuccessful? After rebooting, the device didn’t work properly? Moving on to more complex ways.

    Factory reset

    All data will be lost, including unsynchronized contacts, messages, call history, application data, and files in the phone memory. The contents of the memory card will remain intact.

    • Enter the recovery by holding the “Volume up” and “Power on” buttons in the off state of the device.
    • Select “Wipe data / factory reset” from the list and press the power button
  • After the process is complete, select “Reboot system now” and wait for the device to start.
  • Flashing with ODIN

    If after resetting the parameters, the device does not work, then you should try to reflash it. We are looking here for the firmware for your smartphone model, download the ODIN program from this link and install the drivers for Windows, and then proceed to the instructions.

      Run the ODIN application by unzipping it before

  • In the off state of the device, we hold down the “Volume down” and “Power” buttons, and then press the volume button up
  • We connect the phone to the computer, press the key with three dots opposite “AP” and select the firmware file, which is in the.md5 format
  • After a minute or more, the “Start” button should become active. Click on it when it becomes possible and then the firmware process will go.
  • In a few minutes, the gadget should automatically reboot. If you get stuck on loading animation then try doing a factory reset again.
  • We carry Samsung Galaxy to the service center

    If none of the above solutions to the problem suits you and the phone still does not turn on, then you need to go with it to the Samsung service center. They will probably find out the reason for the loss of working capacity.

    The screen does not work

    It is likely that the device turns on, the display just does not work. When faced with a black screen on your Samsung tablet, examine it from different angles and lighting. Perhaps the backlight simply does not work and you will be able to see the application icons on the desktop. Insert your sim card and try to call this number. Pre-charge your tablet and take the power-on action. Such diagnostics will allow you to understand if the Samsung tablet really does not turn on.

    Samsung tablet won’t turn on

    What to do if your Samsung tablet won’t turn on?

    Don’t panic if your Samsung tablet won’t turn on. Carry out a thorough diagnosis yourself and you may not have to contact a service center. Of course, if the reason is not significant and professional repair is not required.

    Battery problem

    The reason why the Samsung tablet does not turn on may be hidden in a failed battery. If the gadget does not respond to charging and the charger itself works properly on other devices, then remove the battery and check it with a multimeter.

    A healthy battery will supply the minimum rated voltage. A faulty one will give a zero result. Replace the battery with a new one.

    Other hardware problems

    serious hardware malfunctions will help to identify the specialists of the service center for the repair of Samsung tablets. Seeking professional help, you will receive an accurate diagnosis of the declared defect using the necessary equipment, as well as a warranty for the work performed.

    You can ask a question to the masters from our service center by calling by phone or by writing your question on the feedback form.

    You might also be interested in

    Software glitch

    Due to the incorrect operation of the Android operating system, there may be software glitches that lead to such a problem that the Samsung tablet does not turn on. The solution will be such manipulations with the gadget as: reboot, reset to factory settings and flashing. Experts will help you install the new firmware. contact the Samsung Tablet Service. But you can do a full reboot or go to the recovery menu to reset the settings yourself. Well, assuming there are no major hardware faults.

    Power button does not work

    The broken cable of the power button needs to be replaced. When your Samsung tablet won’t turn on due to a failed Power key, you can fix the problem yourself with the right skills and tools.

    In another situation, in order not to harm the gadget, you should contact a repair shop.

    Samsung tablet repair in 1 day

    Order a repair in our service center, and you will receive a working device on the same day, with a guarantee up to 1 year

    Full battery discharge

    The tablet Samsung Galaxy, Tab 2, Tab 3, Note, Note 10.1, Note N8000 does not turn on and does not respond to the charger due to the deep discharge of the battery. This is a very common occurrence and you can solve the problem by leaving the gadget on recharging for a long time. from 30 minutes to several hours.

    This happens when the battery voltage drops below the rated voltage, which is indicated in the technical specifications on the marking sticker.

    Breakage of the display unit of the tablet

    If the matrix is ​​faulty, the device turns on, but the picture does not appear. Replacement of a failed component is required.

    Tablet software or OS crash

    Typically Samsung tablets run on Android or Windows operating systems. An OS is a set of interdependent programs that make up an interface. The user can expand it by downloading applications and widgets, including antiviruses. And failure can occur as a result of their conflict with each other. The solution is to return to the factory settings or reflash the device.

    Hardware damage to the tablet

    Repair may be required, in principle, for any component of the “tablet” Samsung, which has been exposed to external influences: display, motherboard, battery, cables. there are many options. And the protective cover is not always able to save from mechanical damage. For example, it is unlikely to save you from falling from the 10th floor.

    If the damage is not fatal in your situation, repair or replacement of broken and bent components will be required. The necessary information can be found in the Service Center.

    Faulty loops

    It is customary to call flexible elements that connect parts to each other by stubs. There are many of them inside the case. The main ones connect the battery, the screen unit and the power button to the motherboard. Due to inaccurate handling, the shaking loops come off, and the tablet does not turn on. It is enough to disassemble the structure and fix the detached elements, and everything will work, if the problem is not in the connectors that secure the contacts.

    Samsung tablet power problems

    The first thing to think about is whether the battery is dead. If the connection to the current source does not change the situation, option number one is that the charger has broken. Then check which memory you are using. whether it matches the model. If not, connect the original one. Option number two. the power connector is not working. In this case, you need to clean, solder or replace the faulty socket. But do not rush to grab the brush and screwdriver. self-repair threatens with unpredictable consequences. In order not to break completely, contact the service.

    If the Samsung tablet does not turn on due to the battery being discharged to zero, when the power is connected, the indicator still does not light up for a couple of minutes. you just need to wait. One more thing: you cannot discharge the battery 100%. This will shorten the life of the tablet.

    Power supply problems

    It is useful to periodically check the voltage in the network with a multimeter, voltmeter or phase screwdriver. If it is too low or jumps, sooner or later it will lead to burnout of the elements. For example, the power microcircuit (controller) will deteriorate. Unfortunately, it cannot be restored, therefore it is replaced using specialized equipment. To prevent the breakdown from happening again, we advise you to purchase a voltage stabilizer.

    The tablet power button is broken

    Another reason that is easy to identify is the breakage of the on / off button. It happens due to careless handling. For example, they passed or pressed for too long, as a result of which the contact moved away. You can check as follows: if you do not hear a click when pressed, the device does not turn on, the button is really broken. For restoration in the Service Center, the device is disassembled and the contact is soldered into place or the defective part is changed.

    Read more:  Find Samsung Galaxy

    Samsung tablet won’t turn on

    There’s a lot to be said about why a Samsung tablet won’t turn on. The problem is common. The user is accustomed to sending letters, going online, listening to music anytime, anywhere and no longer wants to part with these benefits even for a day. Conclusion. use the device with care and taking into account the manufacturer’s recommendations. Here are the main causes of breakdowns and tell you how to get rid of them. Consider the following:

    • Power supply problems;
    • The power button is broken;
    • BIOS error;
    • Failure of software or OS;
    • Breakdown of the screen unit;
    • Power supply problems;
    • Faulty loops;
    • Consequences of corrosion;
    • Hardware damage;
    • Service Center Recommendations.

    Software breakdowns

    It is more difficult to diagnose software breakdowns, but in most cases it is not difficult to fix it. To understand that the problem is in the software platform, see if the LED lights up at startup. If it is on, but the download is not progressing, then the matter is most likely in a software failure.

    Also, an obvious sign of a software malfunction is a tablet computer that starts up, but constantly freezes. In this case, it is recommended to put the device into safe mode and not delay the visit to the service center.

    There are many options for which part of the software is out of order. But it’s more important for us to find out how to turn on the tablet, and not what exactly happened to it. There is one surefire way to fix the situation by performing a flashing or full reset to factory settings. We recommend starting with a reset, which is also called Hard Reset.

    You can do it even if the tablet is turned off. To perform a Hard Reset, do the following:

    • Press the power button and the volume down key at the same time.
    • We are waiting for the Android logo to appear on the screen.
    • We get into Recovery mode and select the Wipe Data item using the volume keys.
    • The system will ask you if you are sure of your actions. We agree to completely remove all settings and data from the tablet.
    • When the procedure is complete, click on Reboot System to reboot the tablet.

    This is a rather radical way, because all user data will be deleted from the mobile device as a result. But if there is no choice left, you will have to apply it. We recommend placing all tablet data on the cloud on the Internet, then the unexpected need to reset all data will not be a problem for you.

    Samsung Galaxy Tab 3 won’t turn on. causes and solutions

    Tablet computers from Samsung have long won a solid position in the mobile gadgets market. They are reliable, durable and functional, allowing the user to implement a lot of urgent tasks.

    How to fix Galaxy Tab A 10.1 won’t turn on | troubleshooting Galaxy Tab A 10.1 (2019) No Power issue

    samsung, galaxy, turn

    At the same time, like any technology, tablets are not perfect, and sooner or later they stop running. This could mean that your Samsung Galaxy Tab 3 is out of order, and you need to think about how to bring it back to life. The best solution would be to contact the repairmen, but this will inevitably entail additional expenses. To avoid this situation, you can independently find out why the Samsung Galaxy Tab 3 does not turn on.

    If the problem is not very serious, then you can fix it on your own, even if you are not an expert in the field of mobile technology.

    Let’s see what to do if the tablet does not turn on, and what are the main reasons for this situation are known today.

    There are two main reasons why the tablet stopped turning on:

    • Hardware problem;
    • Software problem.

    In the first case, the device may not boot due to some mechanical damage. It is very easy to determine this. as a rule, such damage is noticeable visually. You might not even notice how you hit the gadget on something, even if not hard. But in the end, because of this, it does not work.

    Also, it cannot be ruled out that some internal part of the tablet is out of order, which is extremely important for turning it on. This could be a battery, for example. Such a breakdown will not be catastrophic, because it is easy to replace a failed part, and this requires a minimum of time.

    Software problems are somewhat more difficult to diagnose. If the tablet does not turn on because of them, then the matter is in some kind of viruses or a malfunction of the software platform. It is possible to determine what exactly prevents the tablet from starting by experience, but practice shows that it is better to entrust this matter to the master.

    Hardware breakdowns

    If the tablet does not turn on due to a hardware failure, then the first step is to hold down the power buttons for 10-15 seconds. If nothing happens and the power indicator is off, then remove the battery from the device, and after a while, put it back in and try turning on the tablet again. Perhaps, some contact simply went away, and after doing these manipulations, you will solve the problem.

    It is likely that the tablet does not boot because of the discharged battery. Many users sound the alarm at the sight of a non-working tablet, but they simply forgot that the battery was completely discharged. Of course, in this case, the gadget will not boot until you put the tablet on recharge.

    If the tablet computer put on charge still does not turn on, then most likely the problem is either in the charger, or in the tablet connector to which it is connected, or simply the battery is out of order. It’s also worth checking if the power button works.

    Often the tablet does not turn on also due to problems with the screen matrix. You are unlikely to be able to do anything to correct the situation at home, so take it to the service center right away. The same can be said about cases when the system does not start after the fall of the gadget or its impact on something.

    If you bought a mobile device at a licensed point of sale, and the problem with its operation began within a year after purchase, then you won’t even have to spend money on repairs, since this situation is covered by the seller’s warranty.

    The recommendations given in the article are universal, and they are suitable for Samsung Galaxy Tab 3 tablets and other device models of this manufacturer. We hope our tips will be useful for those who have unsuccessfully updated the software platform or encountered other problems in the operation of the tablet computer.

    Why does the tablet not turn on

    In the second case, the tablet does not boot due to errors in the internal software. This can happen as a result of a failed update, firmware, or operating system failure. It is usually treated by resetting to factory settings or flashing the device. If it was not possible to fix the problem on your own, it remains only to refer the tablet to specialists.

    Repair a tablet that won’t turn on

    To fix the problem, the engineer dismantled the defective part and then installed a new one. This was followed by a reverse assembly and testing, which showed that the repair of the Samsung Galaxy Tab S2 tablet was successful. Current consumption returned to normal, the battery was charging normally.

    The tablet battery is discharged

    The Samsung Galaxy Tab S2 9.7 tablet stopped turning on, as a result of which it came to us for repair. Having started diagnostics, the engineer quickly discovered that the tablet battery was very badly discharged, the voltage on it was less than 3 volts. This value means that the battery is deeply discharged, and is most likely caused by external factors.

    What is a charging controller

    The controller controls the charging process, because if you do not use it, the battery can get very hot during charging, which will lead to its failure. It also does not allow a deep discharge of the battery, because if the voltage drops below a critical level, the cell will degrade and the battery will fail.

    Charge controller defective

    Further research showed that the cause of the malfunction was a punctured charge controller. Despite the fact that the tablet showed that charging was in progress, no power was supplied to the battery, on the contrary, the controller was discharging it, and this was the reason for this state of the battery. Due to the lack of charge on the battery, the tablet did not turn on.

    Samsung Galaxy Tab S2 9.7 does not turn on

    If the tablet does not turn on, it could be caused by either a hardware or software failure. In the first case, the problem is caused by malfunctions in the hardware of the device, in its electronic and mechanical components. Their failure is possible both as a result of long-term operation and as a result of external factors, for example, mechanical stress or water ingress. In this case, only repair will help.

    If your tablet won’t turn on

    If your device does not want to turn on. but you cannot solve the problem on your own, it remains to turn to specialists who are well versed in technology and know firsthand how to repair your tablet.

    Contact a professional Remphone service center for advice and for repairing Samsung tablets!

    Samsung Galaxy Tab charging problems and solutions

    Samsung Galaxy Tab owners complain that sometimes charging the tablet turns into a real torture of the unknown: the indicator does not show the charge level and it is not clear whether the device is working at all. If, in addition, the tablet does not turn on, then the alarm only intensifies.

    Why won’t the tablet charge? Let’s consider the main reasons:

    • Broken charger.
    • Defective power connector.
    • Burnt out power management IC.
    • Bottom loop problems.

    These are the main reasons why the Samsung Galaxy Tab 2 won’t charge and therefore won’t turn on. Now let’s move on to exploring possible solutions to the problems that have arisen.

    Power connector

    In case of negligence, falling of the tablet or other mechanical impact, the power connector may break. Another common cause of failure is wear and tear during long-term use. The solution will be a complete replacement, since repairs will cost more than a new part.

    Bottom train

    The bottom cable contains the battery power module, so if it breaks down, there are problems with charging the tablet.

    It is possible to diagnose a malfunction only in a service center; at home it is better not to try to fix problems of this kind.

    Other possible problems

    Samsung tablets have one interesting feature that often misleads users: if you completely discharge the battery and then put the device on charge, the indicator does not light up for the first time. In this case, you just need to wait a little. as soon as a sufficient charge is accumulated, the indicator will begin to show the process of filling the battery with electricity.

    Important: Try not to completely discharge your tablet. According to research, this leads to a reduction in battery life.

    Avoid Bringing Your Battery To A State Where The Samsung Galaxy Tab Just Won’t Turn On Due To A Lack Of Power.

    Connect the tablet to a power outlet when the charge level drops to 25-30%. By the way, it is not recommended to charge the device from a computer: it is better to use the standard Samsung charger that comes with the kit.

    This is especially true when the Samsung Galaxy Tab does not turn on due to a complete discharge of the battery. Low current will not move the charge level from zero or this process will take a long time, so do not abuse the computer to recharge the battery.

    Power management diagram

    If the tablet experiences a power surge while plugged in and then stops charging, the problem could be caused by a burned-out power management chip. Experts recommend replacing burnt-out microcircuits, and not trying to repair them, since after a strong voltage surge they often cannot be restored.

    Troubleshooting

    First of all, check if the charger is working. This can be done in two ways:

    • If the Samsung Galaxy Tab battery is not completely discharged, connect it to your computer and see if the indicator shows the battery filling process.
    • If your tablet won’t turn on, try using a similar charger model.

    If the tablet is charging with another charger (or via a computer), then just replace the charger. It is recommended to purchase original Samsung Galaxy Tab hardware to avoid any compatibility issues.

    Read more:  Transfer Data from Android to Android Samsung

    Procedure

    If your Samsung Galaxy Tab 2 refuses to charge, does not turn on, and generally hints at a possible prospect of repair in every possible way, then adhere to the following algorithm of actions:

    • Connect the device to the network (only to an outlet, the computer will not work) and wait a moment. It is possible that after a while the indicator will start showing the charging process.
    • If the indicator does not appear and the device does not turn on, try using a different charger. It is important that it is also manufactured by Samsung; it is better to use a similar charger, which obviously works (charges another tablet without problems).
    • If a breakdown of the charger is excluded, then the cause of the problem should be looked for in the tablet itself. As we have already discussed, the weak points in the situation under consideration are the connector and the power management chip, the lower cable.

    Don’t try to repair your Samsung Galaxy Tab 2 yourself.

    Any inaccurate physical impact can lead to even more serious problems.

    You should also not give your Samsung Galaxy Tab to “handicraftsmen” who fix anything that can break. from shoes to tablets. If your tablet does not turn on and you determine the charger is not the problem, contact a Samsung Service Center. Remember that using original parts for repairs will ultimately cost you much less than buying a new tablet or re-repairing.

    Problems with the operation of the Samsung Galaxy Tab S Tablet

    Samsung Tablet Expert Rating

    The tablet fell into the water what to do more than 3 months ago Tablets Samsung Galaxy Tab S

    Good evening. Samsung Galaxy Tab S accidentally fell into water. I’m afraid to tell my parents. About a month has passed. It turns on, but the screen.

    Samsung Galaxy Tab s does not turn on more than a year ago Samsung Galaxy Tab S

    Good afternoon, please tell us in more detail why my Samsung Galaxy Tab S does not turn on?

    Samsung Galaxy Tab s won’t turn on over a year ago Samsung Galaxy Tab S

    My Samsung Galaxy Tab S won’t turn on or even charge, what’s the matter and how can I fix the problem?

    Samsung tablet sat down and won’t charge over a year ago Samsung Galaxy Tab S tablets

    This kind of problem, my Samsung tablet is dead and won’t charge anymore, what should I do?

    When the battery charge is less than 30-40%, the tablet turns off by itself more than a year ago Samsung Galaxy Tab S tablets

    When the battery is less than 40% charged, it turns off and does not respond to any button. It turns on only when the charger is connected. AND.

    Problems with the keys on the tablet more than a year ago Tablets Samsung Galaxy Tab S

    Hello. There was a problem with my tablet. After it spontaneously rebooted, the home button stopped working (although.

    Samsung Galaxy tab s tablet keeps rebooting over a year ago Samsung Galaxy Tab S tablets

    Hello. Tablet Samsung Galaxy tab ‘s constantly Reboots, periodically “loses” the network, in general, lives “its own life”, especially when.

    The flash does not work for the tablet more than a year ago Samsung Galaxy Tab S tablets

    The flash on the camera and flashlight won’t turn on? When you turn on the flashlight, another application uses your LED.Screen brightness.

    After the update, the tablet stuck on the logo and does not boot over a year ago Samsung Galaxy Tab S tablets

    Hello, after the update (official, through the tablet settings), the tablet boots only up to the Samsung logo and freezes.

    Samsung Galaxy tablet charges but won’t turn on over a year ago Samsung Galaxy Tab S tablets

    Hello! Samsung Galaxy Tab C charges but does not turn on. switching on stops at the Android screensaver.

    Wi-Fi not working over a year ago Tablets Samsung Galaxy Tab S

    On the Samsung Galaxy tab s tablet, WI-FI does not work, the button is not bright green

    After the update, you can not access the mobile Internet more than a year ago Tablets Samsung Galaxy Tab S

    After updating the Samsung Galaxy Tab S tablet, you cannot access the mobile Internet, although it shows the presence of a network.

    The tablet keeps shutting down over a year ago Samsung Galaxy Tab S tablets

    after installing the update, the Samsung Galaxy Tab S tablet began to turn off or reboot constantly. Works only from the network. What about him.

    The tablet keeps turning off over a year ago Samsung Galaxy Tab S tablets

    The Samsung Galaxy Tab S tablet constantly turns off, charging from 100% in a matter of seconds disappears to 0% From 0% to 2-3% it charges at least five.

    The flash is on constantly and does not turn off more than a year ago Samsung Galaxy Tab S tablets

    In the Samsung tab S 8.4, the flash turned on spontaneously, it is constantly on and does not turn off. What to do?

    Recover data from Samsung Galaxy Tab S Android 4.4.2 tablet over a year ago Samsung Galaxy Tab S tablets

    Recover deleted files on Android 4.4.2

    Prompt repair of Samsung Galaxy at the “X-Repair” service center

    If a full reset of Samsung Galaxy settings and other tips did not help, bring your phone to the X-Repair SC. Our masters will diagnose it for free and quickly figure out why the smartphone does not turn on. For this we have everything you need. equipment, tools and knowledge. We are waiting at the branches of our network, which you will find near the stations of the Moscow metro.

    What you can do at home if your Samsung Galaxy won’t turn on

    So, after making sure the phone hasn’t dropped or got wet lately, it’s time to consider other versions. There are not so many of them. without the help of a service center employee at home, you can check only three.

      1. The charger does not work. Perhaps the smartphone has completely sat down, and due to faulty charging, you simply cannot charge it. Therefore, try using a different device or connect your phone to your computer using USB. If Samsung turned on, the problem was with the charger. 2. The charging socket is clogged. Few of the users think about the fact that the USB connector needs to be periodically cleaned of debris. The fact is that over time, dust, pellets, and lint collect in the charging socket. To remove the accumulated dirt, you need to turn the phone upside down and very carefully so as not to damage the contacts, clean it with a regular toothpick or tweezers. After the “procedure” put the phone on charge. If it doesn’t help, check the latest version. 3. Errors of the software part. To test this version, it is recommended to perform a factory reset of the Galaxy (hard reset). But since the phone does not turn on, you will not be able to do this through the usual menu (Settings → Accounts → Backup and reset → Factory data reset). There is another way. you need to go into Recovery Mode. To do this, follow the instructions:

    • Simultaneously press and hold three keys: “Home” “Power” “Volume ⇧”. If your Galaxy does not have a Home button, press and hold only Power Volume ⇧.
    • After the inscription with the phone model appears on the display, release the “Power” button, while holding the remaining keys (for about 5-15 seconds) until the Android Recovery menu is displayed on the screen. If the menu still does not appear, repeat the previous steps again, but hold down the keys a little longer.
    • When the menu is highlighted, use the “Volume” key to select “Wipe data / factory reset” and confirm the selection with the “Power” key.
    • In order to select “Yes” (on some devices “Yes. Delete all user data”) press the “Volume” key, and then confirm your choice by pressing the “Power” button.
    • After all data has been deleted, the main menu is displayed. In order for the phone to reboot, in it, using the “Power” key, you need to select “Reboot system now”.

    If you reset the Samsung Galaxy to the factory settings, but the smartphone does not turn on, there is only one way out. contact the specialists for help.!

    What to do if Samsung Galaxy won’t turn on?

    Everyone is used to the fact that the phone is always at hand. with it we always stay in touch and up to date. And at that moment, when it unexpectedly, for some unknown reason, does not turn on, a real catastrophe ensues. With today’s rhythm of life, even more so, to be left without the Internet and connection, even for a couple of hours, is like being left without hands! If such a nuisance has not spared your Samsung Galaxy, the first thing to do is to try to remember under what circumstances it stopped working. If on the eve he seriously fell, got wet or overheated on the car’s torpedo, then one cannot do without the advice of a specialist and professional diagnostics. However, the problem is not always in the hardware of the smartphone. Sometimes you can try to cope on your own. With this we will just try to figure it out today.

    You may also be interested in:

    If, for any reason, you need to disassemble your Samsung Galaxy S7 Edge, use the video tutorial from

    Samsung Galaxy A5 screen replacement (front glass is broken) 4000 Frequent breakdowns Samsung Galaxy A5 does not turn on

    Samsung Galaxy A3 screen replacement (front glass is broken) 4000 Frequent breakdowns Samsung Galaxy A3 does not turn on

    Samsung Galaxy S6 screen replacement (front glass is broken) 7000 Frequent breakdowns of Samsung Galaxy S6 do not

    Why Samsung Galaxy Tab 3 does not turn on: possible reasons

    What if the Samsung Galaxy Tab 3 stops responding to desperate and persistent POWER button presses? First, it is worthwhile to figure out the possible causes of the breakdown.

    • The device was simply discharged. No matter how funny this reason seems to you, we still advise you to first connect your device to a charger and monitor its reaction.
    • The tablet does not charge when connected to a network. In this case, there is a possibility that there was a breakdown in the charging or in the charging part of the Galaxy Tab itself, because very often the charging connectors malfunction or the tracks of the printed circuit board are damaged.
    • Moisture has entered the device. Only a select few lucky ones never spilled water on the gadget, it did not get caught in the rain or fell into the filled bath. If something similar happened with your Samsung Galaxy Tab 3, and an emergency dipping in rice did not fix the situation in any way, get ready for some unpleasant news. Probably due to the ingress of moisture inside the tablet parts oxidized, its “organs” were covered with rust and corroded.
    • The Power button is broken. As a rule, at the moment of pressing the button, a characteristic click should be heard or felt. If you have not noticed anything like this, most likely, the contacts have moved away from the button.

    ALL Galaxy Tab A FIXED: Black Screen of Death, Frozen, Unresponsive, Boot Loop (4 Solutions)

    Try to do the usual manipulations when turning on. The problem may be a battery that has not been charged for a long time.

    What to do if Samsung Galaxy Tab 3 won’t turn on?

    In recent years, Samsung devices have spread quite strongly across the electronic device market. Even the very dubious reputation of some gadgets and the scandalous incidents that happen to them do not repel buyers.

    However, the problems that arise with Samsung tablets, including the Samsung Galaxy Tab 3, are equally common to all such devices. One of the most common difficulties in operation is that the device simply stopped turning on for an unknown reason.

    How to fix the problem: solutions

    You can also try to do a factory reset (hard reset)

    Try to use your tablet carefully initially so that problems do not arise

    So, here is a list of possible reasons why the Samsung Galaxy Tab 3 tablet may not turn on, as well as options for solving them. Some can be solved independently, while others require specialist intervention. If you are confident in your abilities, and your hands seem to grow out of that place, take your tablet and revive it. Otherwise, we advise you to contact the service center. There they will carry out diagnostics, that where they say not so, they will help with the breakdown (if possible, of course) and will give a few tips for the future. Better yet, always treat your gadgets with love and accuracy. Then maybe there will be nothing to fix.