Rollback Ipad Mini

IOS 9.3.5 Rollback Instructions for 32-bit Devices (Jailbreak Instructions)

Rollback Ipad Mini

Attention! This manual is relevant only for users of Apple devices on processors: A5, A6 with iOS 9.3.5.

Hello, I’ll start with a preface, iOS 9.3.5 has become the final system for Apple’s line of A5-based devices, namely:

  • Ipad 2.
  • Ipad 3 (iPad with Retina display).
  • Ipad mini (1st generation).
  • Iphone 4s.
  • Ipod touch 5.

And it became perhaps the most disgusting system from Yabloko, after iOS 4.3 of course.

The devices worked extremely disgusting, the system became unbearably slow, and this applied not only to devices based on the above-mentioned crystals, but this also affected users of the iPhone 5S, 6, and it is simply impossible to say something about the weak hardware of these two devices.

For my personal use I have the first Minic and iPod touch 5, and I can say with full confidence that Apple literally killed this generation of devices with every OS update, and as a result, the final version (9.3.5) worked on them not just badly , but disgusting, and this concerned not only the smoothness of the interface, but also the work of programs, of which I will single out the Procreate graphics editor. In which, when creating illustrations in retina resolution (2048×1536), the application crashed and in some cases did not save the project, as a result, I had to do everything again and postpone the deadline for the delivery of the project. In all other programs, the common symptoms are as follows. Friezes, convulsive scrolling and delays in typing. There was no such hell in iOS 8.

Then I purchased another model of an apple tablet, but I continued to use my mini as a portable device for surfing the Internet and watching movies. In principle it worked and okay. But despite everything throughout the year, I continued to look for ways to rollback and jailbreak my mini-device, but it was all in vain, no utilities for this OS existed. And just the other day I saw the release of an exploit on reddit that allows you to make Jeil on old devices. The first thought was that this is another fake that can do nothing. Then I went to several domestic sites about Apple and saw articles dedicated to this “event”. My happiness knew no bounds. Immediately I ran to put the exploit on the device and look for ways to roll back the firmware, but here again bad luck, I did not find any utilities that did this and I remembered about my iPod, which I updated from iOS 6.1.3 and instead of version 9.3.5 I got 8.4.1, which is very usable on old devices. And what I decided to do next and how I put the jailbreak, you will find out in the instructions below. 🙂

List of devices that support this exploit:

  • Iphone 4s.
  • Iphone 5.
  • Iphone 5c.
  • Ipad 2.
  • Ipad 3.
  • Ipad 4.
  • Ipad mini 1.

How to Jailbreak:

Note:

The jailbreak is half untethered, so after rebooting the device, you will have to install it again (without a computer), this is done simply, you need to follow points 7-9 based on the above instructions

Rollback to iOS 8.4.1:

Sources:

If you have any questions about rollback and jailbreak, write them in the comments, if possible I will try to answer each one. 🙂

How to rollback (return) from iOS 12 to iOS 11. Detailed instructions

Not satisfied with iOS 12? It’s very easy to return.

If for any reason you do not like iOS 12, then you can very easily downgrade to iOS 11. In this manual, we described in detail how to return from iOS 12 to iOS 11 and, for convenience, collected direct links to the current firmware. Ios 11.4.1 for all iPhone and iPad models.

How to rollback (return) from iOS 12 to iOS 11. Detailed instructions

Important! Be sure to back up your device to iTunes or iCloud before downgrading iOS 12 to iOS 11. Returning to the previous firmware via iTunes in the vast majority of cases goes without problems, but it’s better to play it safe.

Step 1. Download the iOS 11.4.1 firmware IPSW file for your device from the links below:

Iphone

  • Iphone X
  • Iphone 8, iPhone 7
  • Iphone 8 Plus, iPhone 7 Plus
  • Iphone SE, iPhone 5s
  • Iphone 6s, iPhone 6
  • Iphone 6s Plus, iPhone 6 Plus

Ipad

Ipod touch

Step 2. While downloading to iPhone, iPad or iPod touch go to the “Settings” menu → [your_name] → iCloud → “Find iPhone” and disable the function of the same name. For this you need to enter your Apple ID password. It is necessary to disable the “Find iPhone” function, otherwise iTunes will not allow you to roll back to the previous firmware.

Step 3. Connect your iPhone, iPad or iPod touch to your computer and launch iTunes.

Step 4. In the iTunes window, select your device.

Step 5. On the page that opens, click the “Restore iPhone” button while holding down the Shift key on PC or Option on Mac.

Step 6. In the window that appears, select the firmware file that you downloaded in the first step and confirm the start of the rollback from iOS 12 to iOS 11. Be sure to wait until the end of the operation and do not disconnect the device from the computer.

Done! You are back from iOS 12 to iOS 11. After the restore process is over, you will need to choose whether to restore the device from a backup, or set it up as new. If you want all your data to be returned to the device, then choose restore from a backup.

Share link

Rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram, VKontakte, Instagram, Facebook, Twitter, Viber, Zen, YouTube.

How to downgrade to iOS 10.3.3 on iPhone 5s, iPad mini 2, and iPad Air

IOS devices with A7 processor (iPhone 5s, iPad mini 2, and iPad Air) can still be rolled back to iOS 10.3.3.

This is possible due to the fact that devices with an A7 chip and iOS 9 or lower need to be updated to iOS 10.3.3 in order to be able to update to iOS 11. It is still unclear how long it will take to rollback, since the signature may close at any time.

Models with A8 processor and newer can be upgraded immediately to iOS 11, and the only signed version is now iOS 11.2.6, so there is no chance of a rollback.

This instruction will be useful only to those lucky with iOS 11.1.2 and below on the following devices:

  • Iphone 5s (iPhone6.1 and iPhone 6.2)
  • Ipad mini 2 (iPad4.4; iPad4.5 and iPad4.6)
  • Ipad air (iPad4,1; iPad4,2 and iPad4,3)

Owners of other devices are strictly prohibited from following the instructions, as this will force the update to the latest available version of the system. Take this warning responsibly.

If you are the owner of one of the above devices and you have a valid iOS 10.3.3.Shsh2 blob, you can proceed.

For example, we used a Windows PC and iPhone 5s (GSM).

What needs to be prepared

  • You need to find out the model ID of your device in iTunes. Open the program, click on the icon of your device, and there you will find the model number.
  • You will need at least 10GB of free memory on your computer’s hard drive.
  • A valid iOS 10.3.3.Shsh2 blob file for your device.
  • IOS 10.3.3.Ipsw file for your device.
  • You need to download the following to your device using Cydia Impactor:
  • For iOS 9 PhoenixNonce.Ipa from here:
  • For iOS 10 v0rtexNonce.Zip (v0rtexNonce.Ipa) from here:
  • For iOS 11 NonceSet1112.Ipa from here:
  • Buildmanifest.Plist file for your model from here:
  • Futurerestore program which can be downloaded from here:

How to downgrade to iOS 10.3.3 on iPhone 5s, iPad mini 2, and iPad Air

Step 1: Extract the downloaded “futurerestore.Zip” archive to a folder on your hard drive called futurerestore (for example, D: ∖ futurerestore) and copy the iOS 10.3.3.Shsh2 blob to it. Also copy the iOS 10.3.3.Ipsw file to this folder. To make it easier to type the command later, the.Shsh2 file can be renamed to “my.Shsh2”, and the iOS 10.3.3.Ipsw file to “restoreto.Ipsw”.

Step 2: Open iOS 10.3.3.Ipsw using 7zip or any similar program and copy the.Bbfw and.Im4p files to the futurerestore folder. Example: for iPhone 5s (GSM) copy Mav7Mav8-7.60.00.Release.Bbfw (in “Firmware“) and sep – firmware.N53.RELEASE.Im4p (in “Firmwareall_flash“). The file names of other models will be slightly different, but the numbers will be 7.60.00 everywhere.

Step 3: Open iOS 10.3.3.Shsh2 as text in Notepad and find a line like 0xab12c34d5ef6ab7d.

Step 4: Enter this line into PhoenixNonce, v0rtexNonce or NonceSet1112 application and press enter. The device may reboot during the process, this is normal. When finished, reboot the device again and open the program to see if the result is successful. If nothing new appears, repeat the process.

Step 5: Connect your iOS device to your computer. Itunes should not work at this time, and there should also be a stable network connection. Open a command prompt and navigate to “D: ∖ futurerestore”. All the necessary files by this point should be in the folder. Then enter the following command:

If you haven’t changed the file names, the command will look like this:

Pressing Enter, you will see a long message. Do not interrupt the process until completion. It will continue on your device, and then you will see the familiar start screen.

Each time the device exits the recovery mode, the process will need to be repeated, starting from step 3.

You can exit recovery mode with the following command:

Don’t beta for developers

Where to get the firmware file?

It is enough to download from the links below. Choose only the version for your smartphone!

Look for the latest firmware versions on the ipsw.Me website.

Iphone:

  • Iphone XS;
  • Iphone XS Max;
  • Iphone XR;
  • Iphone X;
  • Iphone 8;
  • Iphone 8 Plus;
  • Iphone 7;
  • Iphone 7 Plus;
  • Iphone SE;
  • Iphone 6s;
  • Iphone 6s Plus;
  • Iphone 6;
  • Iphone 6 Plus;
  • Iphone 5s.
  • Ipad Pro 12.9-inch (3rd generation)
  • Ipad Pro 11-inch;
  • Ipad Pro 10.5-inch;
  • Ipad Pro 12.9-inch (2nd generation)
  • Ipad Pro 9.7-inch;
  • Ipad Pro 12.9-inch (first generation)
  • Ipad 6;
  • Ipad 5;
  • Ipad mini 5;
  • Ipad mini 4;
  • Ipad mini 3;
  • Ipad mini 2;
  • Ipad Air 3;
  • Ipad Air 2;
  • Ipad Air.

How to easily rollback from iOS 13 beta

Finally, we post the rescue instructions.

Betas are buggy versions of operating systems. I installed the version for developers on my pathetic red “eight plus”, it was like with a constant smartphone and I realized one thing: I have to roll back.

There were many reasons: applications slowed down, settings slowed down, the call could not be completed, some kind of toughness happens to the keyboard, sometimes there is no “Send” button in messengers; there is a network, but it is impossible to get through; Apple’s standard apps work very poorly; what used to consume no more than 10% of the battery now eats up all forty. And I learned these glitches and shortcomings in a day of using it as the main smartphone with iOS 13 beta! In general, I knew that somehow it would be, because this behavior is quite standard for the beta. And I wrote about this earlier:

What is needed to rollback?

  • A backup of your iPhone taken before installing the iOS 13 beta using iTunes. If the backup was made from the iOS 13 beta, then you won’t be able to restore the iPhone and you will have to configure it as a new device;
  • Iphone;
  • Cable to it;
  • Computer with iTunes installed on it;
  • Firmware file.

Instructions

First, look at how much free memory you have on your iPhone. It is difficult to say exactly how much space is needed. Usually ten gigabytes is enough.

Go to the iPhone settings, where you select your account. This is the topmost menu item, where your name is usually indicated.

Then go to iCloud settings and further to turn off Find My iPhone:

Without disabling this feature, you will not be able to rollback to iOS 12. Therefore, be sure to do this.

Then connect your iPhone to your computer and open the sync menu of your smartphone or tablet in iTunes:

Hold down the Option key (on Windows, this is the Shift button), click on the “Update” button and select the firmware file you downloaded, making sure that it is for your smartphone. Then a window like this will appear:

Click “Update” and wait. The process will take about 15-20 minutes.

After that, you can set up your iPhone as new or restore it from a backup you made using iTunes.

Simple working life hack

For those who want to touch the past and work in iOS, the interface of which was saturated with the idea of ​​skeuomorphism, there is still a working solution.

It doesn’t matter which version of the operating system will be installed on the gadget, in just a couple of steps you can jump in time, almost like Marty McFly (well, or Ivan Vasilievich).

Step 1

  • We go to the site ipsw.Me
  • Select the desired device (for example, iPhone 4s)
  • Download firmware 6.1.3 to your computer

Step 2

  • Connect iPhone 4s to your computer
  • Open iTunes
  • Holding the button on the keyboard Shift (or Alt, if a Mac computer), press the “Restore” button
  • Selecting the downloaded firmware
  • We are waiting for the installation of the system

# 128064; Read also. All on the topic

I’d take it. Automatic airbag for swimmers

The mystical forest from The Lord of the Rings exists. It used to be taboo

How to install public watchOS 7 right now

Anyone can destroy a country. How nuclear submarines work

What firmware does Apple sign for iPad Mini

Which iPhones and iPads can be rolled back to iOS 8 and earlier firmware versions and what is needed for this?

Firmware Rollback iPad Mini

Firmware Rollback 6 1 3 Ipad Mini

Rollback iOS from ANY VERSION to an older one. Iphone and iPad

Rollback to ios 9.3.5 is no longer possible!

How to downgrade from iOS 9 to iOS 8.4.1 on iPhone, iPad and iPod touch

Ios 7! How to properly restore (install) on iPhone or iPad, iPad mini

How to sign i4tool firmware (And the answer to the question “What can I do?”)

3dswitcher 2. Multitasking like in iOS 7/8 on iOS 10 and other effects | Cydia iOS 10 Tweaks

  • How to check the serial number of Macbook Pro
  • How to Transfer Music to iPad without iTunes
  • Missing image on iPad
  • How to connect iPad and TV
  • What is celular on iPad
  • How to transfer SMS from Android to iPhone
  • What to do if iPhone runs out of power while flashing
  • How to connect iPad air to TV
  • The iPhone makes a strange sound
  • Iphone 5S models what are the differences
  • No network on iPhone 4 after recovery
  • Iphone 5 lock with an arrow what is it
  • Iphone deletes messages by itself
  • Recommend Motorbikes for iPad
  • Macbook is not included in the system

Home »Clips» What firmware does Apple sign for iPad Mini

What firmware does apple sign. What firmware does apple sign. CYGO. Panda E (PARODIA)

Dyakuєm our friends from Magic Five for giving a camera for zyomka: id-tv.Org/ch/UCEGfICV92gmM5w2t3gYfQDwDirector of the fleet. Goo.Gl/SbFgGDZ feed ads: [email protected]

Text: I will tell you that I remembered everything in my life, Yak a couple of evil people made their way to the beach at night. And the bitches brazenly stole the devil. Do not knowOh goat-thieves, your mother, I have a great chance, thank you, I got the see it crunches on the whole Sveta such did not meet on the whole Sveta so do not meet you It is not difficult to return sweet kavun. Turn the sweet kavun easy! And the taste to hammer it is stupid for us, but it’s true, the kavuni isn’t good for nothing, baby, it’s true, don’t run out with the speed of a cheetah! The speed of the cheetahs is not good for nothing, baby, however, don’t run out with the speed of a cheetah before going to bed, it is necessary to cut off the obov’yazkovo before going to bed, then you must not run around with the speed of cheetahs, the berry otsya! Shob nourished, in juice piv lyya, bitch piv lyya! Three kilograms. Not a dream! We were all lucky, we seem to be in unison: “dyakuum, Kherson!” If the grain in you is a bodun, in the head is a typhoon. Bite kavun and pass badun! Be you Ukrainian and French, you won’t forget its taste! Tse kavun. Ti watermelon!

What firmware does apple sign. SOVHOZ.ME

Posted: 69 Days Ago (11 Jul 2018)

The picture came out in 2006, helping to download large files to your PC. Apr 18, 2016 As a rule, A continues to sign old firmware for several more days. What firmware is being signed about the file. So it turns out that in order to successfully roll back from the problematic version of the OS, the user first needs to find out which firmware it is possible to roll back to. A stopped signing the OS 9 firmware files. We sign the firmware using the OS example, this firmware will be without upgrading the modem version and For A4 devices and below so. All images are typical to be rewritten under the spoiler Only logos in the tables of contents of music lovers are joined with which firmware 2014 two have already been imported. Questions are waiting for your answer.

Iphone slows down after updating: what to do? How to upgrade iPhone 6S to iOS 12

Backup

In the case of Apple, there are very few unforeseen situations, but nevertheless, making a backup in iTunes or iCloud is your must. We also recommend that you have a copy of your Photos and Audio materials on your PC for later uploading them back to your phone (audio and backup are definitely not saved).

Here you should take into account that saving a copy in iTunes will only be available for iOS 9, so if you do not have a previously saved copy for iOS 8, if you rollback successfully, you will have to set up your phone as new. If the procedure fails, you can always return the 9th version.

In the case of iCloud, as far as memory serves me, all copy data will be restored regardless of the version of iOS installed, so we prioritize iCloud, if nothing is wrong with it, then we save the data in iTunes.

Selecting and downloading firmware

Since since 2009, Apple began to control which versions of iOS it is possible to return to specific devices, you need to check whether it is possible to rollback from your device in principle and, if possible, to which version.

Demonstration of possible iOS for rollback on the example of iPhone 4S

For this check, it is very convenient to use the service from Appstudio.Org, by clicking on the link you will clearly see a list of available iOS versions that you can return to. In our case, this is iOS 8.4.1, with this information we proceed to the next step, namely, you need to download the firmware of the corresponding version to your computer.

The download process consists of following this link and choosing your device type, device generation and firmware version. After all these steps, the download process will begin, select a place on your PC to save the firmware and use it to rollback in the future.

You may also be interested in

Rollback iOS or how to revert to a previous version

Always, with the next iOS update, some users persistently want to return the previous version, in other words, roll back. The reasons can be both dissatisfaction with the interface, the appeared brakes (in the case of iOS 7), and outright bugs up to the inoperability of the phone (in the case of iOS 9). Fortunately, the company gives us such an opportunity and now we will consider this process using our instructions as an example, we will roll back the iPhone 4S.

Rollback firmware from iOS 9 to iOS 8 (iPad, iPhone, iPod Touch)

Attention! In this article, I use screenshots from the iPod Touch, but this does not play a significant role. This manual is valid equally for iPad, iPhone or iPod Touch.

IOS firmware rollback (Downgrade iOS). Installs an older firmware version. Previously, rolling back firmware to older systems was difficult, but more likely. To do this, the user had to save SHSH certificates (digital signature, unique for each device).

In this case, we are rolling back iOS 9 to iOS 8. These two systems support: iPad 2, iPad Mini 1, iPhone 4s, iPod Touch 5G and newer devices in the lineup. For all these devices, rollback is possible only on iOS 8.4 (as of July 12, 2015) even with saved SHSH.

Now for the general case. As a rule, a rollback to an older firmware version is possible:

A) if the previous firmware is still valid. For example, the whole world is currently testing the iOS 9 Public Beta. The official version of iOS 9 will be released in the fall. So, up to this point, the user has the opportunity to flash his device to the current officially iOS 8.4.

B) if the new official firmware has just been released. For example, after the official release of iOS 9, the user will have from 1 to 7 days (maybe a little more) to change his mind and make a rollback. At some point, Apple suddenly stops signing old firmware, and then rollback is impossible or significantly difficult.

The rollback instructions in this case are identical to the firmware via recovery.

Step 1. Download the firmware from your device, to which you can rollback.

Step 2. Disable the function: “Find iPad, iPhone or iPod” (depending on your device). Settings-iCloud.

If this is not done, then iTunes will not allow you to carry out the firmware. After flashing, do not forget to turn the option back on.

Step 2. We connect the device to the computer via a cord. We go into iTunes and select the device. We are looking for the “Restore” button and press with the Alt-Option key (in OS X) or Shift (in Windows).

In the new window, select the downloaded firmware. Then, in the window that appears, click “Restore” and the restore / rollback process begins.

This must be remembered!

The device will roll back to factory settings. That is, before starting the system, you will have to re-configure it (you must at least know the password for the Wi-Fi network).

A backup copy can be rolled onto an older firmware only if you have a backup copy made on the old firmware. Including therefore, it is recommended to save a backup copy to a computer before flashing iOS.

Happy rollback everyone! 🙂 If you have any questions, additions or problems. Write comments.