Reset ipad to factory settings

Table of Contents

Reset without password

It happens that a user has forgotten the password from his Apple ID or did not know it at all, since the tablet was presented to him already configured. In this case, the instructions for restoring through iTunes will be useless, since the “Find iPad” function is active, and it is impossible to turn it off without knowing the password. In this case, you will have to enter the Recovery Mode and do all the procedures in it. It can be used to bypass Find iPad. In fact, the reset procedure is no different from the one described above, only the device itself must be at the time of pairing with a PC in recovery mode.

reset, ipad, factory, settings

To do this, it must be disconnected from the cable and turned off completely. When the device has finished working, hold down the “Home” button and, without releasing it, connect the iPad to the PC via a cable. If everything is done correctly, the iTunes icon and the drawn cable will appear on the gadget screen. Now it remains to enter iTunes and reset the device in the same way as described above.

Reset iPad to factory settings

Owners of technology from Apple are less likely than users of other brands to encounter problems with the operating system, but sometimes they have to reset the iPad to factory settings. The reasons for this may be different, but the ways to roll back the system from this do not change. There are three options. through a tablet, through a PC and a method for those who do not remember the password for the account.

Preparing to reset

Before you reset your iPad to factory settings, you need to make sure that the device is at least 30% charged, and ideally fully charged or connected to power. The second important preparatory point is creating a backup. It is necessary if the user does not reset the device for subsequent sale or to eliminate software failures after an unsuccessful update of his device to a new software version. After the end of the procedure, all user data can be restored from the copy.

There are two ways to make a backup:

  • directly from the tablet via iCloud;
  • by connecting the device to a PC, here you will need iTunes installed.

The difference between the methods is that in the second case, the user does not choose which data to save. All information will be copied in general. photos, music, notes, bookmarks in the browser, contacts, and more. It is quite obvious that this process may take longer, but after recovery everything will return to its place. The iCloud option allows the Apple owner to choose what they want to keep. To copy to the cloud, you need a stable Wi-Fi internet connection. Both methods work on all versions of tablets and smartphones. from iPad 2 to iPhone XS.

Reset via iTunes

Another way to reset iPad to factory settings is to use iTunes on your computer. It was mentioned above that it should first be updated to the latest version. It is important to disable Find iPad before restoring iPad using iTunes. This requires your Apple ID password. How to rollback without a password will be described in the last section of this text. If there are no problems with access to the account, then the device will be reset according to the following algorithm.

  • Disabled “find tablet”.
  • ITunes starts on PC.
  • The tablet connects to the laptop with a cable.
  • The symbol of the connected device appears in the upper left corner.
  • After clicking on the icon, go to the “overview”.
  • A window will appear with two buttons. “restore iPad” and “restore from a copy”. The second item will be required after resetting the device and restoring the settings. Resetting iPad settings to the factory state is performed after clicking on the first “restore iPad” button and confirming the action in another window, where you need to click on “restore” again.

Making a copy via PC

To save all data from the device and fully restore information, it is better to use iTunes. The procedure is simple, so it is worth sacrificing time and waiting for a full copy so that later it does not turn out that important data has been accidentally deleted. The procedure for creating a backup in iTunes is as follows.

  • ITunes must be enabled on PC.
  • Before backing up or resetting your iPad, iTunes needs to be updated to the latest up-to-date version.
  • The iPad is connected to a PC via a cable, the connected gadget will be displayed in the “devices” menu in iTunes.
  • Using the mouse, a menu of functions opens, in it you should select “create a backup copy”.

It remains to wait until the end of receiving a copy. The waiting time will vary depending on the amount of internal memory and how full it is. When the process is complete, go to iTunes settings, open the “devices” item and make sure that a fresh copy of the system is displayed there, and it is indicated that the process was successful. Then you can reset iPad to factory settings.

Making a copy via iCloud

A copy to iCloud is created through the settings directly in the tablet. The user needs to enter the “repository” item, and then select “create a copy”.

System rollback through iPad settings

The easiest way to reset iPad to factory settings is through the firmware in the device’s settings. There are various options to roll back the device. saving user data or completely deleting all information. In addition, you can delete the settings for network connections if you have problems connecting to the Internet, or delete the settings for the “home” button, as well as clean the dictionary in the keyboard and get rid of geolocation data.

To restore the device to the factory state, the user needs the first two options. “reset settings” or “reset settings and content”. The second option is best used if you later need to set up the iPad as new (that is, the tablet is sold to a new owner), and the first option is suitable for eliminating errors in the operation of the iPad. For example, he began to freeze or the application does not open. If you just delete the settings, then the changes will not affect the user content.

To reset the iPad, you need to enter its settings, select the “basic” item, at the end of the list there will be a sub-item “reset”. It contains a few more points, which are listed above. It remains to choose the most suitable one and follow the instructions of the system.

The best iOS tablets

Tablet Apple iPad (2018) 128Gb Wi-Fi Cellular on Yandex Market

Tablet Apple iPad (2018) 32Gb Wi-Fi on Yandex Market

Tablet Apple iPad mini 4 128Gb Wi-Fi on Yandex Market

How to Factory Reset iPad Using iTunes

If you forgot iPad password or your iPad is stuck in recovery mode, then you can use iTunes to factory reset iPad without password. Just make sure you are using the computer that you synced with iTunes before. So you can follow up on how to factory reset iPad using iTunes.

Update iTunes to the latest version. Use a lightning USB cable to connect your iPad to your computer that you’ve synced with. iTunes will automatically detect your iPad.

iTune can’t detect your iPad? Just try to reset iPad iPhone without computer or iTunes.

Select your iPad when it appears in iTunes. Click “Summary” in the left pane. Select “Restore iPad” and confirm to start restoring iPad to factory settings. It may take a while to preload the firmware.

Then your iPad will be installed as new and you can restore iPad from iCloud or iTunes backup. Can’t restore iPad? Here are the fixes.

Factory Reset iPad with iCloud Backup

Enter “Recover from iCloud Backup File” mode.

How To Reset An iPad To Factory Settings (Tutorial)

Step 2. Sign in to iCloud with Apple ID and password.

Step 3. Download and scan certain types of files. Then view and recover deleted data from iCloud backup to your computer

How to Factory Reset iPad

If you can still remember what your iPad password is, you can factory reset your iPad without iTunes or a computer. As you know, restoring iPad to factory settings will erase information and settings on your iPad. So you need to set up iPad with iTunes or iCloud backup files later.

Note: Factory resetting iPad will erase all content and settings on the device, so you’d better back up your iPad to an external hard drive to prevent any data loss.

Step 1.Choose iPad factory settings

Open the Settings app on your iPad. Click General and scroll down to select Reset. There are six options for resetting iPad. To factory reset iPad without iTunes or a computer, select Erase All Content and Settings. This means that all files, including apps, videos, photos, music and other content, will be permanently removed from your iPad.

Read more:  How To Untie Icloud From iPad

Step 2. Reset iPad to factory settings without a computer

You need to confirm the action to restore iPad to factory settings and then enter the restriction password.

After that, your iPad will reboot with the Apple logo and a loading bar will appear on its screen. Wait a few minutes to complete the process of resetting iPad to factory default settings. What’s more, restore iPad with iTunes backup if needed.

If you forgot Apple ID or password, read this post on reset iPad without Apple ID or password.

How to Factory Reset iPad (iOS 14 Supported)

This is a good way to get a new iPad again by resetting iPad to factory settings. You must remember to reset your iPad before reselling or giving away. In fact, resetting iPad is a useful way to fix many problems. For example, you can fix a disabled iPad if you forgot iPad password. You can also factory reset iPad to get rid of freezes, black screen and other situations.

  • how to factory reset iPad
  • how to factory reset iPad using iTunes
  • Factory iPad vs third party tool
  • How to restore iPad after reset
  • Frequently asked questions about iPad factory settings

Restore iPad to Factory Settings with iTunes Backup

Find the “Recover from iTunes Backup File” mode

Click Start Scan to scan and extract your iTunes backup.

Step 3. Preview and restore iPad after factory reset

Factory iPad VS third party tool

For people who haven’t backed up iPad with iTunes before, the easiest way. To completely and permanently erase iPad with Apeaksoft iPhone Eraser, you can reset iPad settings with forgotten iPad password. There are three different iOS data erasure levels, including Low, Medium and High. iPhone Eraser can erase and overwrite your iPad with different times. All of this deleted iPad content cannot be recovered. So if you want to sell your old iPad on eBay, use iPhone Eraser to clean your iPad first.

Use a USB cable to connect iPad to computer and then launch iPhone Eraser. It will detect your iPad automatically after a few seconds. Actually, you can connect multiple iOS devices and delete everything with iPhone Eraser.

To reset iPad to factory settings without iTunes, you need to set its erasure level. Click “Low” to overwrite all iPad data in one go. iPhone Eraser can protect your privacy by completely deleting data from iPad. In addition, you can also set the local path and format to save the exported erasure history with setting options.

Press the Start button to permanently reset iPad to factory default settings. Well, iPhone Eraser is fully compatible with iOS 11 and all iPad models including iPad Pro / Air / Mini and iPad 1/2/3/4/5 generations. So there is no limit to factory reset iPad with iPhone Eraser.

You can also check this tutorial to erase iPad:

Save all important files

All the necessary information should be transferred to a flash drive. You can also create a reserve. about this below.

Recommendation: It is advisable to disconnect all external devices from the MacBook: storage media, adapters, a mouse, and also break pairs with paired devices.

Disable Find My Mac option

You can unlink the MacBook to Apple ID. This requires:

  • Go to “System Preferences” through the Apple menu.
  • Go to iCloud Cloud.
  • Find the option you want and uncheck it.

If you forget the password, you can go the more complicated way. reset the contents of NVRAM, which is a volatile memory cell. It stores user settings such as volume, brightness, display resolution, etc. You can remove this information like this:

  • turn off the device,
  • press CommandOptionPR at the same time,
  • hold down the power button and do not release until the logo appears on the monitor for the second time.

As a result, the settings will fly off and the MacBook search option will turn off.

What you need to do before “zeroing” the MacBook

Before you do a factory reset on an Apple laptop, you need to prepare. It does not take much time.

How to make a backup

You can use the utility integrated into your MacBook. It’s called Time Machine (TM). You will also need a portable hard drive.

  • Connect a USB flash drive or other media.
  • MacBook will offer to use it to create a reserve through TM.
  • Click on “Encrypt backup disk”.
  • Click “Use”.

If the program does not ask for permission to select a drive for backup, you will need to enter it manually.

How to do it in the TM parameters:

  • Click “Select backup disk”.
  • From the proposed ones, mark the desired option.
  • Then already define the encryption of the copy and click “Use”.

Important! If there are files on the disk, the software will prompt you to erase the data. If the information on the storage medium is important, it is better to use another storage device.

As a rule, TM makes backups automatically. But before you reset your MacBook Pro or other Apple PC to factory settings, you can make a backup yourself. To do this, in the software menu, you just need to select the appropriate option. and the software will start copying.

How to reset MacBook to factory settings without data loss

To roll back a MacBook, but keep all the important information, you must:

  • Disable device.
  • Enter recovery mode. This can be done using Cmd R. If you want the system to immediately update to the latest version, then you need to press Cmd Alt R.
  • Click on “Reinstall mac OS”.

That’s all. Then you just need to act according to the prompts of the system.

What is a factory reset

Zeroing means returning the MacBook to its original state. It will only have basic functions, as if the user had just taken a laptop out of the box. All data and installed software will be erased.

How to Factory Reset iPad / iPhone without Password

What if you forgot your password? How to factory reset iPad or iPhone without password? If you forget your password, you may not be able to factory reset your iPhone or iPad. AnyMP4 iOS System Recovery. it is a system recovery tool that allows you to fix iPhone / iPad problems or even reboot your iOS device without a password.

  • 1. Reset iPad or iPhone to factory settings without password.
  • 2. Install the latest iOS on your device, or downgrade to an earlier iOS for troubleshooting.
  • 3. Recover iPad and iPhone in recovery mode or DFU without rebooting.
  • 4. Available for all iPhone and iPad models with iOS 14/13/12/11 or earlier.

how to reset iPad Mini / Pro using iCloud

iCloud allows you to factory reset iPhone using buttons. If your iPhone or iPad is not available, you can factory reset iPad / iPhone remotely.

Here are some requirements for the method. You must set up the Find My iPhone or Find My iPad option on your device. over, you have to make sure the iOS device is online.

Step 1: Open a web browser on your computer and go to the iCloud website. Sign in with your Apple ID and password associated with your iCloud account. If you’ve set up two-factor authentication, enter the verification code that appears on your device.

Step 2: Select Find My iPhone or Find My iPad on the home page. Then click and expand the All Devices dropdown and select the iPhone / iPad you want to factory reset.

Step 3: There are three different options, Play Sound. Lost Mode and Erase iPad (Erase iPhone). Select the last one and confirm it. Your iPad or iPhone will now be reset to factory settings.

Note: If your iPad or iPhone is currently offline, iCloud will perform a factory reset when your iOS device is online. over, you can also upload iCloud photos after deleting all content and settings on iPad.

How to Factory Reset iPad Mini / Pro and iPhone without Passcode

Restoring iPad Mini / Pro to Factory Settings It’s important to erase all your personal data and fix any problems. Restoring iPad or iPhone to factory settings is not that difficult. What if you don’t have a password? How to hard reset iPad Mini / Pro without losing original data?

If you need to erase all your personal data before selling your old iPad or iPhone, or you need an important troubleshooting solution, you can read more about the ultimate guide to factory reset iPhone / iPad due to various scenarios from the article.

How to Erase and Factory Reset your iPad!

How to backup iPad Mimi / Pro before factory reset

Once you have installed the iOS backup program, you can launch it on your computer. Connect iPad to your computer using the Lightning cable. The program will detect the iPad automatically.

Step 2: Make a backup for iPad mini

Click the iOS Data Backup button to go to the next window. You can choose the Standard backup option and select the files you want to back up. Click the Run button icon to save the iPad backup to your computer.

How to Factory Reset iPad Without Passcode

Step 1: Install iOS System Recovery for Mac

Connect your iPhone or iPad to your computer using a USB cable. Once you have installed the program, you can launch it and select the iOS System Restore option. Select Device Problems And Click Run Continue Button.

Step 2: Factory Reset iPad

Select Advanced Mode and press the Confirm button. Put your iPad into Recovery Mode or DFU Mode and fill out the form in the firmware download window. Select the appropriate iOS version and click the Next button to start a factory reset iPad without a password.

Methods to Reset iPad Mini / Pro to Factory Settings

If you want to factory reset your iPad Mini / Pro or iPhone, you can go to your iOS device’s settings to restore it to factory settings in a few clicks. You can of course use iTunes or iCloud to revert to the original status.

how to factory reset iPhone / iPad directly

If you need to troubleshoot your iPad Mini / Pro or iPhone, you can back up your files and factory reset your iPad / iPhone to restore it to its original state as described below.

Step 1: Go to Settings of your iPhone / iPad select General option and click on Reset option to factory reset iPad or iPhone.

Step 2: You can click the button that says Delete content and settings. A confirmation window will pop up, so click the Erase button. It will delete all files from your iOS device.

Read more:  iPad 10 Update Zero

Step 3: When you reset your iPhone or iPad to factory settings, the iOS device will reboot, and when you turn it back on, the device will revert to factory settings and data.

how to reset iPhone to factory settings via iTunes

iTunes. it is the default utility for iOS device management, including iPad and iPhone factory reset. Make sure you turn off Find My iPhone on your iOS device. Also, you will need a USB cable to connect your iPhone.

Step 1: Connect iPhone to computer with Lightning cable. Launch iTunes and update it to the latest version.

Step 2: After your device is recognized, click the Device icon in the upper left corner. Go to the Conclusion tab and click Restore iPhone under the operating system information.

Step 3: Click the Restore & Update button to start the iPhone factory reset process immediately. When it finishes, your iPhone will restart and display the welcome screen as a new device.

Note: iTunes can only install the latest iOS on your iPhone after a factory reset.

How to factory reset iPad

The need to reset iPad to factory settings can arise in a variety of situations. For example, a reset may be necessary in the event of a software failure or when the device is sold. In this article, we will look at three ways at once on how to reset iPad to factory settings.

But, first, a few words about safety. Before resetting iPad, you need to check the battery charge level. It is necessary that it be charged at least 30 percent, and preferably everything at 100. Since turning off the device during a factory reset can lead to breakdown. Also, before resetting, it is advisable to make a backup using iTunes. This will allow you to restore everything in the event that you change your mind. And if you have an iPad with a jailbreak, then it is better to refuse to reset the settings altogether, as this can lead to problems with loading.

Resetting iPad via Settings

If you want to reset iPad to factory settings, the easiest way is to use the corresponding function in Settings. To do this, you need to go to the iPad Settings and go there to the “General” section.

Then you need to scroll to the bottom of the list and open the “Reset” subsection.

This will take you to the section with settings related to factory reset on iPad. The following functions are available here: Reset All Settings, Erase Content and Settings, Erase Network Settings, Reset Home Button Settings, Reset Keyboard Dictionary, Reset Geolocation Settings. If you want to reset iPad to factory settings, then “Reset all settings” or “Erase content and settings” will suit you. Select one of these functions and follow the instructions that appear on the screen.

  • The “Erase all settings” function removes the settings of the iPad. All settings are returned to factory defaults, while your data remains intact. This function is suitable if you have any problems with the settings. For example, something freezes or does not work as it should.
  • The “Erase content and settings” function is a complete reset of the iPad to factory settings. When using this function, all settings will be reset to factory defaults, and user-generated content that was on the iPad will be deleted. This reset option is suitable if you plan to sell your iPad or just give it to another person for use.

Reset iPad via iTunes

You can also factory reset iPad using iTunes. In this case, first you need to turn off Find iPad. To do this, go to the iPad Settings, open the “iCloud” section and disable the “Find iPad” function there. It should be noted that to disable this feature, you will have to enter your Apple ID password. Without this, you will not be able to turn off the iPad search and perform a factory reset via iTunes.

After disabling Find iPad, you can start resetting your iPad to factory settings. To do this, launch iTunes on your computer and connect your iPad to your computer using a cable. After connecting your iPad, click on the device icon that appears in the upper left corner of the iTunes window.

Then you need to go to the “Overview” tab.

And click on the “Restore iPad” button there. It should be noted that there is also a “Restore from copy” button next to it. This button is responsible for restoring the iPad from a previously created backup and has nothing to do with a factory reset. Therefore, do not confuse the buttons “Restore iPad” and “Restore from a copy”.

After clicking on the “Restore iPad” button, a small window will open asking you to confirm the iPad reset to factory settings. In this window, you need to click on the “Restore” button again and then the iTunes program will begin the process of resetting the settings on your iPad.

Reset iPad via iTunes without password

If you have forgotten your Apple ID password, the instructions above will not work because you simply cannot turn off Find iPad. If you find yourself in such a situation, then you can try resetting iPad to factory settings using Recovery Mode.

Entering Recovery Mode is easy enough. To do this, you need to do the following:

  • Turn off the iPad and wait a few minutes for all programs to finish their work and the iPad turns off completely;
  • Press the “Home” button and without releasing it, connect the iPad to the computer using a cable;
  • You need to hold the “Home” button until the iTunes icon and cable appear on the iPad screen;
  • After that, the “Home” button can be released, you have successfully entered the Recovery Mode.

After enabling Recovery Mode, you need to launch iTunes on your computer and click on the “Restore iPad” button. This way you can reset iPad to factory settings without Apple ID password.

If you need to exit Recovery Mode without using recovery, then just press the iPad’s power button and hold it until it starts to boot.

How to Factory Reset iPhone: 3 Ways for Different Occasions

Keep a quick cheat sheet on how to factory reset iPhone. with and without iTunes.

For a number of reasons, you may need to reset your iPhone to factory settings. In Apple’s terminology, this is called “restoring iPhone”, that is, returning the original settings and setting up the smartphone as new. Read below for three ways to do this.

Method two, through iTunes (the device does not turn on)

If the iPhone is no longer able to start on its own, you will again need a computer with iTunes and a USB cable. To reset the settings, follow the instructions:

  • Connect iPhone to Computer and Open iTunes.
  • Under Settings [your name] iCloud, turn off Find My iPhone.
  • On the connected device, make a forced restart:
  • IPhone 8 or later: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Then press and hold the power button until the recovery mode screen appears.
  • On iPhone 7 or iPhone 7 Plus: Press the power button and the volume down button at the same time. Hold them until the recovery mode screen appears.
  • IPhone 6s and earlier: Press the Home and Power buttons at the same time. Hold them until the recovery mode screen appears. In all three cases, it looks like this:
  • A pop-up window appears in iTunes asking you to restore or update your device. Click “Restore”.
  • In this case, the iPhone settings will also be reset to factory settings, and the current version of the operating system will be “uploaded” to the device.

    Method one, through iTunes (the device turns on)

    If your iPhone isn’t severely damaged and can turn on, and you have a USB cable and a computer or laptop with iTunes installed, do the following:

    • Launch iTunes on your computer.
    • Under Settings [your name] iCloud, turn off Find My iPhone.
    • Connect iPhone to computer with USB cable. If iTunes requires you to enter a password or make this computer trusted, follow the instructions of the program.
    • When the device is displayed in the program, select it in the panel on the left.
    • On the Overview tab, click the Restore iPhone button.
    • In the pop-up window, click “Restore” again to confirm.

    After that, the device will be cleared of your data and returned to factory settings, and the current version of iOS will be installed.

    Method three, without iTunes (the device turns on)

    You can also do a factory reset on the iPhone itself if you don’t have a computer. But this can be done only if the device turns on.

    To do this, follow these steps:

    • Go to the device menu in the “Settings” “General” “Reset”.
    • Click “Erase Content and Settings”.
    • Enter your device password or Apple ID password to confirm.

    After that, wait for the settings to be erased. The device will be returned to factory condition.

    If your iPhone turns on, we recommend that you back up your data to Apple cloud or external storage before resetting.

    Removing content and all parameters

    This is another method, which differs in that it affects the entire memory of the phone, thus not only the memory with settings is erased, but also all content. Upon completion of the procedure, you will lose all data, it will not be possible to recover it in the future, so make a copy of it in advance.

    It is also worth knowing that you will need to turn off Find iPad before resetting your iPad. Without this, you will not be able to do anything. This will also delete the downloaded app cache.

    Network reset

    This will help remove errors in connecting to different networks. As described earlier, go to “General” = “Settings” = “Reset” and click on “Reset network settings” confirming your actions by clicking on the inscription “Reset settings”. The brand logo and status bar will be displayed on the screen. When she reaches the end, the smartphone will restart and turn on as usual.

    iPhone slows down after updating: what to do?

    Possible options for a factory reset

    In order to reset all the settings, you need to go to the menu of the same name, for this we go to the “Settings” and select the “Basic” item and tap on the “Reset” menu. It is there that you need to start the procedure, but the main thing before that, do not forget to save important iPad data, in the future it will be impossible to restore them.

    Read more:  iPad Air 2 Sensor Replacement

    Before performing a reset, it is advisable to familiarize yourself with its possible methods, including:

    • Reset all parameters;
    • Cleaning content and personal installations;
    • Network reset;
    • Clearing the keyboard dictionary;
    • Deleting the parameters “Home”;
    • Deleting Geolocation Parameters.

    Now let’s take a closer look at each method.

    Reasons for factory reset

    In this article, you will learn all the methods of restoring iPad to factory settings, but first, let’s look at the cases in which this procedure will be needed:

    • Immediately before selling the tablet to another person. This is necessary in order to reset all parameters and delete data that you do not want to share with strangers.
    • When uninstalling programs downloaded from the AppStore.
    • To perform a factory reset. This is necessary to eliminate some errors in the smartphone or various system failures.
    • For various problems with connecting to a Wi-Fi network or mobile networks. This will help eliminate the problem of a weak signal, its temporary loss or complete absence.
    • If you have any problems with your VPN connection.
    • When deleting personal layers directly from the dictionary of the keyboard being used.
    • To restore the default arrangement of icons on the desktop.
    • To clear the program cache, this will clear the available space.

    Resetting Home Settings

    This will come in handy if you decide to return to the default desktop, as well as restore the default arrangement of icons. This is the easiest procedure, we tap “Reset settings to Home”, immediately after that the icons will return to the order set by the developer.

    Restore iPad Industrial Options with iCloud

    If you, unfortunately, lost your own iPad and for some reason abandoned it, but you still want to make an attempt to protect your privacy. Restoring iPad to Industrial Options via iCloud is Your Best Choice.

    Sign in to your iCloud account on your computer.

    Sign in to iCloud.com and sign in to your iCloud account, you get:

    Log in to Find iPone, enter your ID password. The site is then converted into a map showing the location of your iPad. Find your own iPad and click on it, then press the info key on the right side, you get some functions on the right side of the screen. After you select Erase iPad, iCloud will tell you that the remote iPad can no longer be found or tracked. Select Erase.You will be prompted for your Apple ID password and you will receive multiple messages asking you to enter your own phone number to remind the person who picked up your iPad to contact you via a message that will be displayed on the iPad screen.

    Click OK to start erasing.

    Click OK A window will appear warning that if you find this iPad, some services may be temporarily unavailable after it is restored. This can lead to the loss of some important data saved in iCloud.

    Factory reset iPad with FoneEraser for iOS

    Do you think your data on the device is permanently deleted and one hundred percent after deletion?

    Do you think your data will not be disclosed if you erased it earlier?

    Deleted data is still stored on your device, but invisible to users. They can be restored by some professional iPhone data recovery software without any difficulty. So if you wish to delete your data one hundred percent, FoneEraser for iOS is highly recommended for you.

    FoneEraser is a safe and comfortable iOS data cleaner to erase all content and options on your device. Then you can implement or donate your old device to others without consideration.

    • It supports iPhone, iPad or iPod touch.
    • This ensures that your deleted data cannot be recovered.
    • There are 3 erasure levels for options.
    • Text content, media, app, documents and options can be removed completely.

    Follow the steps below to erase data on iPad in a few clicks.

    Download the software and then install it on your PC. Double click to start the program, if it does not start automatically.

    Connect your iPhone or iPad to your PC using a USB cable. Click Trusts on the screen of your device. It will show you the connection status, click the Retry icon if it failed.

    Choose from 3 erasing levels. High level is recommended here It completely destroys data with three overwrites, which is the safest and more constructive method to start your device from a clean sheet.

    Confirm again by clicking Yes.

    FoneEraser for iOS is just for the user of the ever newest fish. You do not need a lot of professional knowledge or nology for this. Why not try it now?

    Reset iPad via iTunes

    Also you will be able to reset iPad to industrial options using iTunes. In this case, you must first turn off Find iPad for you. To do this, go to the iPad Options, open the “iCloud” section and disable the “Find iPad” function there. It should be noted that to disable this function for us, you will have to enter your Apple ID password. Without this, you will not be able to turn off the search for the iPad and reset the options through iTunes.

    After disabling Find iPad, you can start resetting your iPad to industrial options. To do this, launch iTunes on PC and connect iPad to PC using a cable. After connecting the iPad, click on the device icon, which will appear in the upper left corner of the iTunes window.

    Then you need to go to the “Overview” tab.

    And click on the “Restore iPad” button there. It should be noted that there is also a “Restore from copy” button next to it. This key is responsible for restoring the iPad from a backup made in advance and has nothing to do with resetting to industrial options. Therefore, do not confuse the keys “Restore iPad” and “Restore from a copy”.

    After clicking on the “Restore iPad” button, a small window will open asking you to confirm the reset of the iPad to industrial options. In this window, you need to press the “Restore” button again and then iTunes will start the process of resetting the options on your iPad.

    How to reset iPad to industrial settings

    The need to reset iPad to industrial options can appear in different situations. For example, a reset can come in handy in case of software glitches or when you sell your device. In this article, we will immediately see three methods on how to reset iPad to industrial settings.

    But, at the beginning, a few words about safety. Before you reset your iPad, you need to check the battery charge level. It is necessary that it be charged at least 30 percent, and better all at 100. Since turning off the device while resetting the options can lead to breakdown. It is also better to back up using iTunes before resetting. This will allow you to return everything, in the event that you change your mind. And if you have an iPad with a jailbreak, then it is generally better to refuse to reset the options, as this can lead to dilemmas with downloading.

    How do I reset my iPad on the home screen?

    If you don’t have a computer, you can reset your iPad to factory settings from your iPad’s home screen. But first, back up your iPad data to iCloud or PC so that you can return the iPad backup later.

    Tap Settings on iPad

    Get to the General menu. Click on this.

    Scroll all the way to the bottom and click Reset Menu.

    On this screen, you will find the following options:

    Reset All Settings: If you give your own iPad to a family member who is going to use the same Apple ID, you may need to reset all options. This reset mode does not erase anything, but it does one hundred percent erase all configurations in Settings, saved passwords for Wi-Fi, iPad unlocking, etc.

    Erase All Content and Settings: This iPad reset feature will make the newest iPad exactly the same status as when you just open the box. All apps, app data, photos and everything else will disappear. This means your iPad has been reset to industrial options. This is perfect for you to choose if you want to implement your own iPad.

    Reset network options: If you are having difficulty connecting to Wi-Fi or having other difficulties connecting to the Web, try this option first. This will clear all data stored on your specific network and fix the problem without full recovery.

    You will also be able to figure out return the iPhone without updating.

    Reset Keyboard: iOS Dictionary will learn and memorize the words you have entered. It fills up quickly with your typed words and sentences. You can clear this list by resetting the keyboard dictionary if it bothers you.

    Reset Main Screen Layout: If it takes a long time for you to locate the Destination Application, you may need to consider resetting the Main Screen Layout to get to the application sooner. This reset feature will force your iPad to reset the deck icons to their default icons.

    Reset Location & Privacy: If you’ve ever changed your privacy or location service options, you can reset them to industrial options if you wish. This helps in recalibrating the weather, traffic information and naturally your privacy configurations are also reset to factory defaults at the same time.

    Click Erase Content & Settings to reset iPad to industrial settings.

    Something you need to know

    After you have decided to remove content and options from your iPad, you will be prompted to enter a password, if you have a password lock on the iPad, and you have confirmed your choice twice, whether you really want to delete all music, photos, multimedia, or the rest data. content on your iPad.

    After proving your choice, the process of deleting data from your iPad begins. It will take a couple of minutes. Once this is done, the iPad will show a screen that says Hello in a couple of languages. At this step, everything is ready, if you want to implement it for a new person, but if you restart your iPad to solve the problem you are facing, you can return the iPad from an iTunes backup.

    Some iTunes users may want to figure out how to reset iPad to factory settings using iTunes on computer.

    Let’s move on