Remove the password from the computer at the entrance. How to change the entrance password to Windows…

how to remove password at the entrance to Windows 7/8/10?

Many Microsoft Windows operating systems protect their accounts on computers with password. This is an effective way to prevent outsiders to access his data, but it becomes a big problem if the combination of characters for entering is forgotten. Some in such a situation despair and think about formatting a hard disk and reinstalling the system. No need to do this. there are methods that allow you to remove the Windows 7, 8, 10 password and enter the system again without losing data and time. In this article we will list the most popular of them, and you just have to choose how to use.

The question of how to remove the password at the entrance to Windows 7 or another version of the OS, not new. He is well known to software developers, and they offer applications that allow you to turn off the password protection and return to their account. Microsoft provides reliable data protection, but third.party developers were able to successfully overcome it. Further. a list of the most effective programs that allow you to delete Windows 10, 7, 8 password.

Passfab 4winkey

The creators of this application made the main emphasis on the lightness of its use even by non.professionals and the complete security of the data recorded on the hard disk. To work with the program, you do not need any special knowledge-you need only a few minutes of time and a clean disk or a USB flash drive. To remove the Windows 8 or other operating system, install Passfab 4winkey on a computer to which you have access.

• one. Insert a CD or flash drive and run the application. Make sure that there are no valuable data on the medium. the program format it.
• 2.Choose a carrier that you want to make loading and click the “Next” button.

Attention: Before deleting the password at the entrance to Windows 10 or another version of the operating system, your disk or USB flash drive as the first loading device.

It safely, without damaging the data, will remove the password at the entrance to Windows 8 or other OS. Reboot the last time. Do not forget to enter the BIOS again and install the system settings so that the first boot device is a hard drive. Now you can enter your account without a password and continue to work in it.

One of the advantages of Passfab 4winkey is that this application supports different versions of Microsoft operating systems (from Windows XP to Windows 10 and Server 2019). In addition, it can be used on devices with MacOS and new computers with UEFI BIOS. The application is undemanding to resources, and to work with it needs a minimum of time. The developers offer a version that allows you to create a boot cd or DVD-disk. There are other versions that are more functional-they allow you to use the USB flash drive as a boot carrier, remove forgotten passwords from ISO-images of operating systems (both standard, that is, “clean” and customized).

Offline NT Password Registry Editor

First of all, download and unpack the ISO-image with this application, as well as a program for creating boot devices (for example, RUFUS). Using a computer or laptop to which you have access, create a bootable USB flash drive by installing it on a computer, and then starting Rufus and choosing the desired media and unpacked image.

After clicking on the Start button, the application will format the USB flash drive, make it loading and write down the Offline NT Password Registry Editor program on it. Before performing this action, make sure that there is no valuable data on the flash drive. When the bootable carrier is ready, install it on a computer with a locked account and load. Do not forget to enter the BIOS and specify the USB flash drive as the first boot device-as described above. You will get into the text integration text.

Here you need to perform several actions sequentially to remove the password at the entrance to Windows 10 or another operating system:

• 01 press Enter for loading;
• 02 dial the operating system number by selecting it from the list, and press Enter;
• 03 dial Y and press Enter in response to the question “Do you wish to formce it?”;
• 04 Select the Password Reset [SAM] point, dial 1, press Enter;
• 05 Select the “Edit User Data and Passwords” item, dial 1, press Enter;
• 06 choose Rid of the user of interest from the table, dial it, press Enter;
• 07 select “Clear (Blank) User Password”, dial 1, press Enter;
• 08 after the message “Password Cleared!”Select” Quit Editing User, Back to User Select “, dial q, press Enter;
• 09 performing the following steps, reach the reboot of the computer. Before its execution, remove the loading USB flash drive.

As we can see, the Offline NT Password Registry Editor application is more difficult to use than Passfab 4winkey, especially for those who are not used to working with a text intese and do not speak English. Perform all actions carefully, carefully and sequentially, and you successfully delete your password.

OPHCRACK LiveCd

By analogy with the previous case, you need to download the image of the OPHCRACK LiveCD application, and then create a bootable USB flash drive using the RUFUS program on its basis.

Install a loading USB flash drive into a locked computer and load from it. You will see an application integration in which you will need to choose a user account account. The essence of the program is to select a password. After the application successfully selects it, you will see a combination of characters in the NTPPASSWORD field. Knowing it, you can reboot, enter the account, and then remove the password if necessary.

We use regular funds

If you consider yourself a confident PC user, you can do without third.party applications for Windows 10 and delete the password using the regular tools of the operating system.

Command line

To use this method, open a terminal with administrator rights.

Although this manual is written for Windows 10, these instructions should be valid in Windows 8 and Windows 7 operating systems.

Restoration of factory settings

When using this method, you will lose all your user data on hard disk, but save the operating system activation.

For example, for HP brand laptops, this is the F11 key. You will see the menu in which you need to select the “System Recovery” item.Further actions depend on what kind of brand the computer is talking about. Their meaning converts to the need to find and choose a item that allows you to perform the restoration of the system without saving factory settings.

Removing password from Microsoft account accounting online

The method is suitable for the Windows 10 operating system.

• 01 you need to enter your account on the website Microsoft
• 02 then click on the link “Change the password”.
• 03 you will get to the page on which you will be offered to enter and confirm the new password.
• 04 After performing this action, you can load the operating system and enter the account by introducing a new combination of characters.

In this article we offer 6 different methods. Each method has its advantages and disadvantages, and we hope that you will find a method that suits you the most. But most often we advise using Passfab 4winkey. Because it is easy to work with this software, there are no difficulties, and it can satisfy any of your needs 100% without losing system files and information.

User data confidentiality is of great importance. That is why the Windows operating system immediately after installation proposes to create an entry password to the user account in order to prevent unauthorized access to personal data. At the same time, you do not have to use the password at all and if you think that you do not need it, you can just miss this step yet.

If the password was created during the installation, but after a while you decided that you do not need it. you can easily turn it off, and this can be done in several ways. You can use both built.in system functions and third.party.

In addition, instead of a password, you can use a PIN code. Its main advantage is the length (4-cyphra)-respectively, it is easier to remember and input requires less time.

It is also worth noting that the shutdown of the entrance password into Windows reduces the speed of loading OS for a few seconds.

If you are sure that you want to turn off the password at the entrance to Windows. use any of the methods described below.

How to disable the entrance password into Windows in account settings?

This method is one of the simplest and does not require the installation of additional software, or deep knowledge of PC. In order to turn off the entrance password into Windows, take a few simple steps:

Click with the right mouse button on the “Start” button and select “Perform”. The same action can be performed using the key combination “Win R”

In the window opened, enter the NetPLWIZ command and click OK to perform it. (You can also enter Control Userpasswords2 and confirm the execution of the Enter key)

Before you will open the menu of local user accounts. To turn off the password at the entrance to Windows, select the user for whom you want to turn off the password, and then remove the checkmark near the point “Demand user and password” and click OK to confirm.

The system will require the introduction of the user and password. Enter the relevant data, then click OK to confirm the password outing.

As soon as you click on the OK button. changes are made in the entry settings to the user account and after the next Windows download you will no longer have to enter a password.

How to remove the password in Windows 7 before entering the system

In most cases, special third.party software, for example, Active Password Changer, Lazersoft Recover My Password or Winpasskey, will help the user. Otherwise, it is enough to use the Windows installation disk.

In this method, you can also pre-upload the installation files of the operating system to a Flash drive. A prerequisite is the presence of the same version of Windows on one of the carriers, for example, home or professional. To reset the password, perform several consistent actions.

Insert the drive before loading the system and go to BIOS. For entry into BIOS, the “F2” or “del” keys are most often used, but there are exceptions to the video “F1” and “ESC”.Find the Boot section or a similar menu. Select the corresponding section for loading the system from a disk or flash drive. To do this, transfer this section above in the list. We keep changes and reboot the computer.

In most cases, to exit BIOS while maintaining changes, you need to press the F10 key and click on the “Yes” button, however, in rare cases, other options can be used. Use the Exit section in the main menu and use the Save Exit Setup item.

After loading the disk in the language selection window, click “Next”.

We use the “Restoration of the System” button and expect some time to search for the installed operating system.

Choose the system used and click “Next”.

In the list of sections, select the “command line” and in the window opened, enter “regedit” without quotes. The registry editor will open on the screen.

Open the “Hkey_lokal_machine” folder and click the “File” button. In the list of actions we use the “Download bush” item and cross the path “Windows/System32/Config”.

In the opened folder, select the System file.

In the field that appears, we introduce an arbitrary name of the section, for example, “2021” without quotes. Open the “HKEY_LOKAL_MACHINE” folder and go to the newly created section. Go to Setup and find the parameter “CMDLINE”

We click on it with the right mouse button and press the “Change” button. In the window that opens, we introduce “CMD.exe “without quotation marks and click” OK “to preserve changes.

We change the value of the “Setuptype” parameter from “0” to “2” without quotes in the above method. Click “OK” to preserve changes and click on the created section, for example, “2021”, with the left button.

Go to the “File” section and use the “Unload bush” key. We reboot the computer. You can first pull out the drive and return the settings of the system load to the original state.

After loading Windows, a command line will immediately appear, in which we enter the Net User without quotation marks and press the Enter key. For example, “Net User Admin”. If nothing is indicated after the user’s name is entered, then the password will not be installed, so the user will be able to immediately enter the system. You can also use the Net User command to familiarize yourself with all available system profiles. Enter “Exit” and click “Enter”. After starting the system, enter a new password and enter Windows.

How to remove the password in Windows 7 via command line

The fastest way to turn off the password on Windows 7. To do this, follow the following actions:

• Open the Start menu and in the search window we introduce “CMD” without quotes.
• We open the command line, enter the Net User command without quotes and press the Enter key. All available profiles in the system will be displayed in the window.
• Introduce the “Net User ‘Name of the User” without quotation marks, where instead of the “user name'” you need to insert the current name of the profile. For example, introduce Net User Reminaru and click Enter to remove password.
• We press “Enter” twice to set an empty password and confirm this action.

How to turn off the password when loading Windows 10

When turning on, the computer, as a rule, asks to enter access code. Protection of the account using the password is designed to close access to your confidential information for other users. However, if you are the only user of a personal computer, a constant password request at the entrance to the system will be more likely to interfere than to help.

This is extra action, unnecessary information that must be remembered, an increase in the load time when the PC is turned on and so on. In addition, if you forget it, you will get a lot of problems.

Therefore, most users are easier to remove password entering for their account in Windows 10. This article is devoted to this issue.

Disconnecting request for Microsoft account

The above methods allows you to get rid of the password check at the entrance, but only when you work with a local account. However, Windows 10 allows you to log in to the system using a single Microsoft account. And in it it is no longer possible to remove the password. However, you can configure automatic data input for entering the system when starting this personal computer. This can be done in two different ways.

Settings of accounts

The first way to remove the check is simpler. However, unfortunately, not on all computers it works. It is strongly recommended to first try it. And already in case of failure to move on to the next point. To configure automatic input without request, follow the presented instructions:

• Use the combination of Win R. to call the dialog box “Perform”.
• In the empty text line of the window that appears, you need to enter or copy the NETPLWIZ command and press Enter.
• In the menu opened, a list of accounts on this PC is displayed. Select your Microsoft account.
• Remove the daw from the option “Demand the user name and password”.
• Click app.
• After that, you will be invited to configure the parameters of the automatic entrance. Write the user name (maybe already written), and two times the code from the account.
• Click on the OK button.
• Reload your computer.

In most cases, this is enough to ensure that the entrance to the OS passes without a password request. However, if you did not manage to remove the audit, you will need to start editing the registry manually.

Changing the registry

The registry stores data that Windows 10 uses to work. By changing existing and creating new notes, users can seriously change the operation of the operating system. Therefore, all changes should be made extremely carefully, since any error can lead to incorrect work of the computer.

Before starting work in the registry editor, it is strongly recommended to make a system recovery point. If something goes wrong, you can easily roll back to the saved version of Windows 10, without resorting to reinstalling.

System Register editor

To enter the editor, users will need to do the following:

• Call the dialogue to “execute” using Win R.
• Enter Regedit and click OK.
• If the program requires the permission of the administrator, click OK.
• There are catalogs on the left side of the editor. With it, find the HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Windows NT \ CurrentVERSION \ WINLOGON Directory
• Find a record with the name “DefaultDomainname”. Click on it twice to start editing. The name of your local computer (or domain) must be entered in the “Value” field. To find it out, click Win Pace/Break and find the appropriate parameter.
• Autoadminlogon parameter is required to change to “1”.
• In “Defaultusername” enter the login of your accounting Microsoft.
• Click anywhere in the editor’s working area with the right mouse button.
• Select the “Create” option, then “Strite parameter”.
• What is it “DefaultPassword”, and enter your access code for entering its value.
• Reload the computer.

If you do everything right, Windows will not request a password when downloading.

How to reset the password on Windows

If you forgot the password and cannot enter the local profile of the Windows administrator, it is not at all necessary to reinstall the OS. There is a simpler exit: defense reset. In modern versions of Windows, you only need to enter a couple of commands for this; In earlier options you will need a second computer, a USB drive and a free utility for a password reset.

How to reset the password on Windows 11 and 10

Click on the “Food” icon on the lock screen, and then hold the Shift key and select “Reload”.

When the computer is restored in recovery mode, go to the “Search and Elimination of malfunctions” → “additional parameters” and call the “command line”.

Insert the Copy C: \ Windows \ System32 \ Utilman command into it.Exe C: \ Windows \ System32 \ Utilman2.exe and click Enter.

After that, enter Copy C: \ Windows \ System32 \ CMD.Exe C: \ Windows \ System32 \ Utilman.exe, and then press the Y key to confirm and Enter.

Close the command line and select “Continue” to download Windows.

On the lock screen, click on the “special features” icon to launch the command line and enter the Net User command.

Repeat the Net User command, then add the name of your account through the gaps (as indicated in the output of the previous command) and a new password. For example, Net User Akozoriz Lifehacker.

Close the command line and enter your account using the new password.

After that, you can turn off or change the cipher, as described in the previous sections of the instructions.

Create a loading flash drive on another PC

Download the Lazesoft Recover My Password program to any available computer.

Launch a downloaded file and install installation.

Connect the USB flash drive to the computer. If necessary, make a copy of the files stored on it, since all the information will have to be deleted.

Open Lazesoft Recover My Password, Click Burn Bootable CD/USB Disk Now! and create a bootable flash drive using program prompts.

Download the computer using a flash drive

Insert a prepared USB drive into a computer, the password from which you forgot.

Turn on (or reboot) PC and, as soon as the system begins to load, click on the transition key to the BIOS settings. This is usually F2, F8, F9 or F12. depends on the equipment manufacturer. Most often, the desired key is displayed on the screen while booting BIOS.

While in the BIOS menu, go to the Boot download section if the system has not redirected you there right away.

In the Boot section, install the USB flash drive first place in the list of devices that will appear on the screen. If you do not know how to do this, look around: there should be tips about management nearby.

If the BIOS is also protected by the code that you are unknown, then you will not be able to reset Windows password protection using Lazesoft Recover My Password.

Perhaps, instead of the classic base system, you will see a more modern graphic intese. In addition, even in different old versions of BIOS, settings may vary. But in any case, the procedure will be approximately the same: go to the boot boot menu, choose the source of the desired USB drive and save changes.

After that, the computer should load from the flash drive on which the Lazesoft Recover My Password utility is recorded.

Reset the password in Lazesoft Recover My Password

Select Lazesoft Live CD (EMS Enabled) and click Enter.

Reset the password for your account using the prompts Lazesoft Recover My Password.

After these actions, Windows will stop asking the old password, and you can set the new one according to the instructions at the beginning of the article.

How to remove the password from the Windows 7/8/10 computer through the official website of Microsoft

This method is perfect for users who use Microsoft account to enter the Windows 10 system. In this case, you can easily reset your password to your account on the official website of Microsoft. The procedure is nothing complicated, you only need to perform a few simple actions. You can familiarize yourself with detailed instructions further.

On any device accessible to you with the Internet connection (phone, tablet, other computer), open the browser and go to the Microsoft account restoration page: https: // Account.Live.COM/Password/Reset.

Enter your email address, phone number or Skype identifier, tied to your account, and then click the “Next” button.

After receiving the code, enter it in the appropriate field with your chosen way and click the “Next” button. The password reset window will open, here indicate the new password for your Microsoft account, confirm it with repeated input and click on the “Next” button.

How to remove the password from the Windows 10, 8, 7 computer in safe mode

The safe mode is designed to diagnose problems in the operation of the operating system of your computer, and it can also help correct many problem situations, including reset Windows account password if you do not remember it. To remove the password to enter the system on your computer in safe mode, follow the instructions below.

Translate your computer with a blocked account into “safe mode”.

How to remove the password at the entrance to Windows 10?

You can delete the password of your account in Windows 10, regardless of whether you use Microsoft’s account or local account, and in this manual you will learn how to complete this task.

If you use the Microsoft account, it is impossible to completely delete the password, since your accounting data is related to your network account. However, you can configure your computer to automatically enter the system to simulate an account without password.

• Open the start in Windows 10.
• Find NetPLWIZ and click the upper result to open the control panel.
• Select an account to delete a password in the section “Users for this computer“.
• Remove the user’s flag must enter the user name and password to use this computer parameter.
• Press the application button.
• Confirm Microsoft account data for automatic input.
• Press the OK button
• Press the OK button again.

After you perform these steps, the device will have a password, but it will automatically enter the system with each restart.

In addition, you can completely remove the password if you use Microsoft’s account, but you will have to switch to a local account.

• Press “Next.
• Confirm the current password.
• Press “Next.
• Create a user name for an account.
• Leave the fields “password” and “re.enter the password” empty to completely remove the password.

After you take these steps, the laptop will no longer connect to the Microsoft account and will automatically enter the system with each system launch.

• Open the settings
• Click your accounts
• Click the entrance parameters
• Select the “password” parameter in the “entrance to the system on the device” section.
• Click the change button.
• Confirm the current account password.
• Press “Next.
• Leave the fields “password” and “re.enter the password” empty to completely remove the password.

• Press “Next.
• Press the button ready.

If you want to remove the password due to the fact that it is inconvenient, it is better to switch to faster and safe authentication methods. For example, you can create a PIN code or configure the fingerprint reader. which requires only a simple finger.

• Open the start in Windows 10.
• Find the command line, click the upper result with the right mouse button and select the parameter “Launch on behalf of the administrator”.
• Enter the next command to view all accounts and click Enter:

• Enter the next command to change the account password and click Enter:

In the team, change Username to the standard name or name of the administrator account, which you want to update.

After you take steps, the account will no longer turn on the safety password for entering. If you need to install a new password, you can perform the same actions, but indicate the new password at the step.

How to remove the password at the entrance to Windows 11, switching to a local account

In the “Start” menu, click on the right mouse button in your name and select “Change the score parameters”.

Click “Enter instead with a local account”.

Click “Next”, enter your password and click OK.

Leave all the fields except the name of the user, empty and click “Next”.

Click “Exit the system and finish work” for re.entry without password.

How to remove the password in Windows 11, turning on the automatic input

This can be done in two ways. However, whatever you choose, you first need to deactivate the Windows Hello function.

If you skip this step, the password will not be requested, but instead you have to enter a pin code.

Disconnect Windows Hello

Click on the “Start” button with the right button and select “Parameters” or just click Win I on the keyboard.

Go to “Accounts” → “Entrance options”.

Scroll through the list to the “Additional Parameters” section and turn off the toggle switch “To improve safety” “. Also choose the option “Never” for the option “In case of your absence”.

Use a special program

There are two options: NetPLWIZ and proprietary Microsoft utility for administrators called Autologon built.in in Windows. Choose any. the result will eventually be the same.

NETPLWIZ

Call the context menu by clicking on the “start” with the right mouse button, and select “Perform”.

Highlight your account and remove the box from the option “Demand user and password entering”, and then click “Apply”.

Confirm the changes by introducing your password twice, and click OK.

Reboot the computer and make sure that the entrance is performed without password.

Autologon

Follow the link and download the utility from Microsoft.

Unpack the uploaded archive and start the Autologon64 file with a double click.