Redmi AirDots How To Connect To iPhone

Table of Contents

How to connect Mi Band 2 to iPhone?

Xiaomi Mi Band is a series of popular fitness trackers that allows you to keep track of steps taken, calories burned, as well as measure heart rate and set a smart alarm. The advantage of this device over some other analogues is not only the price, but also the ability to connect it to both Android devices and iOS smartphones from Apple.

How to connect Mi Band to iPhone?

In general, the connection of the Mi Band to the iPhone is almost the same as the pairing with Xiaomi smartphones.

After authorization in the application, you need to tie the bracelet to your smartphone and start using it.

Ideally, following the instructions in the program, everything should go smoothly, but sometimes situations may arise in which the iPhone does not see the Mi Band 2. This may be for several reasons:

  • Mi Band is not unlinked from another account;
  • Your fitness tracker has communication problems;
  • Devices are far from each other;
  • You bought a fake on Mi Band 2.
Redmi AirDots How To Connect To iPhone

For the Mi Band fitness bracelet, the iPhone application exactly repeats its Android version and is almost completely translated into Russian, with the exception of some points that you can easily figure out on your own.

Also see

How to put a password on Xiaomi?

Hidden Album on Xiaomi

What to expect from Xiaomi Mi 6x (Xiaomi Mi A2)?

29 comments

Will it be indicated from whom the call is or only that the call is in progress or an SMS has come? Thanks.

If you choose English as the main language on your smartphone (the entire menu will be in English), then Mi Fit will display the option to display the caller’s name (at least on Android, this is exactly what is solved by installing a modified version of the application, which is not available for the iPhone).

Hello. The smartphone connects to the bracelet via Bluetooth, but the MiFit program does not see it. What could be the problem?

Good afternoon. What is the smartphone model? The MiFit app currently supports smartphones no older than iPhone 5S (iPhone 5 not supported) with an operating system of at least iOS 9.0. Another problem, if the Mi Band is not new, may be that the bracelet is already tied to some other account.

Mifit app is not compatible with this device. Iphone 5 what to do? Tell me please.

Unfortunately, now you can install MiFit on smartphones not older than iPhone 5s with an operating system not lower than iOS 9.0.

Hello, I can not install the program on iPhone 5. Writes: “does not match the device”.

Good afternoon. You need to install the MiFit app from the App Store by clicking here.

Hello. Please tell me what to do if the iPhone 5s says “could not find the bracelet”, but finds a pair in the Bluetooth settings.

Good afternoon. There are two options:
1. In the Bluetooth settings, he really does not find it, but SIMply shows the previously saved device. You can check it by searching with another smartphone that has not yet “seen” this bracelet.
2. If he really finds the bracelet, but the program is buggy and does not want to connect to it, then there is only one solution. Try to look more carefully around the Mi Band apartment yourself.

Is it possible to connect this bracelet to iPhone 6s with iOS 12?

Can i connect to iPhone 5? Thanks ?

Hello! I can’t pair Mi Band 3 with iPhone 6s Plus. Bluetooth does not see it. What to do?

Good afternoon!
Miband 2 is new from DNS, there are no signs of a fake. I tried to create an account through the application, it does not give after selecting the country. “No connection.” Created an account on the site. When entering the application, it says “Login failed”.
Tried it on 3 different iOS and Android devices. All the same and also “Failed to sign in”. For 6 hours.

Good afternoon. Try installing some kind of VPN on your smartphone. Recently, due to the actions of Roskomnadzor, such problems have arisen when authorizing in MiFit.

Dmitry, thanks! Installed Thunder VPN on Android, the app is working. How much time is lost because of them!

I also have the same problem with dns. I’m thinking of going to talk to them so they can connect or change them.

Please tell me what you need to do if you did everything right on all points, that is, I downloaded the Mi Fit application, registered and as soon as it comes to connecting the bracelet itself, I get an error and writes “check if the bracelet is empty or that it is far away located”.

It looks like the phone can’t see the bracelet. What is your smartphone? Requires at least iPhone 4S. Is the bracelet new? If not, it must be unlinked from the old account. And, of course, when pairing, the bracelet must be charged and be near the phone.

Why won’t the MiFit app download on my iPhone 5?

Judging by the description in the AppStore, the iPhone 5 is no longer supported by the program. To install the application, you need an iPhone 5s or newer, and iOS version 9.0 or higher.

Help me please. I downloaded the program to the IPhone 5SE, created an account, but for the second day I can’t enter the program, writes “I could not log in. Send error logs and help us find the problem? ” and another window pops up “Authorization error”. What am I doing wrong?

It’s hard to say, but an authorization error means that the username or password is entered incorrectly.

Vpn will help you.
But this is not enough for connecting a bracelet.
I went into the program using vpn and then.

Good afternoon. Can you tell me if it will work with iPhone 4? I want to buy, but I’m afraid that they won’t make friends with the device! Very worried!

Hello. The Xiaomi Mi Band 2 fitness bracelet will not work with the iPhone 4, since the phone has an outdated modification of the Bluetooth 2.1 wireless communication module, but the iPhone 4s already has version 4.0 installed and the bracelet will work with it.

Good afternoon!
Tell me, good people, to synchronize the Mi Band 2 bracelet with the iPhone 6 (I also tried it with the iPhone 5 and Samsung). The problem is that the phone SIMply does not see this unfortunate bracelet through MI FIT and through another application. I created a new account, but if there was a link to the account of the previous owner, as far as I understand, a message would be displayed, like “the device is already synchronized with another phone”. And Bluetooth itself does not see it.
OK, read the tips! I downloaded the nRF connect application. It finds the bracelet and connects to it. At this time, using MI FIT, I also try to connect with the bracelet, but he still does not see it! At the same time, through the settings in the phone and on the bracelet screen itself, you can see that the connection is established (via nRF connect), but there is no sense in this. There is also no way to enter the bracelet through the Bluetooth settings. It just writes that it is connected and that’s it. If you turn off Bluetooth on the phone, the bracelet will sadly vibrate 3 times and show a Bluetooth icon with a cross on the screen, they say the connection is broken, but don’t worry. # 128578; I have not tried all these operations on other phones, since they are not mine, but it seems to me that everything will be the same. On the advice on some site I almost pressed the tracker itself into the phone screen when trying to synchronize. The effect is zero!
Question! Maybe this is due to an update of the application of some kind, or maybe something with the firmware of the gadget itself? Or just throw this damn bracelet away?

Read more:  How to Connect a Speaker Via Phone

Good afternoon. In the event that the bracelet is tied to another account (via Mi Fit), you SIMply cannot tie it to your own, since it will not appear in the list of available devices, and therefore will not report that it has already been tied to another owner. But the fact that it is absent in the Bluetooth list is another question. Maybe this is not Mi Band, but a copy of it, and in the list of devices it is displayed somehow differently? Check out this article, in which I tested the original and the fake. For the “copy” it was required to use another application.

How to connect Redmi AirDots to iPhone

How to connect Mi AirDots to iPhone phone?

The wireless headphone manufacturer in China has guaranteed connectivity to both Android and iOS. Does this mean that Mi AirDots can be connected and configured to every device called Apple? When connecting iOS devices, everything will depend on the compatibility of the Bluetooth release used in the devices. If you have problems with your iPhone, you should immediately take it to a service center. You can find out more about repair services on the website isupport.Kz. It’s no secret that audio output products from Xiaomi have begun to be manufactured using a wireless communication protocol of at least version 4.2, and AirDots 2019 products already support Bluetooth 5.0 and the AAC codec made specifically for Apple.

Xiaomi AirDots connection with iPhone

Step 1. Start Bluetooth support on iPhone (Settings, Bluetooth, slide the toggle to On). Allow time until the phone finds all connected Bluetooth devices.

Step 2. Remove Xiaomi AirDots from the charge container. If the headset is in a case, you will not be able to connect and configure them to any device as usual. Outside the container, they will instantly start working and the status LED will flash off-white. Therefore, the right earphone will connect first and then the left earphone, they will start functioning in tandem.

Step 3. A new name will appear in the search list for Bluetooth devices connected to the Xiaomi Redmi AirDots, or it will be Xiaomi Mi AirDots (or AirDots Pro. Depending on the model). A radar that looks for different wireless devices is always on. You may need to wait a bit for the headphones to show up in the search list. Otherwise, you will need to disable and restart Bluetooth on the iPhone in order for it to detect your AirDots.

Step 4. Go to “Redmi AirDots_R” and the connection between the headset and the iPhone will be established automatically, you just need to agree to this connection. After the procedure is completed, the pointer on the headset will turn off whitish and go out.

Almost always, Bluetooth headphones connect to the iPhone without question. If at the first connection you successfully solved this problem, then later, taking the headphones from the charging container, the connection with the iPhone will start automatically. At the same time, it should also be canceled that first of all it is necessary to remove the right (main) earphone from the container, otherwise, if you connect the left one first, then only one earphone will start working for AirDots. Therefore, only the left earphone will function, and the connection with the right one will be lost. Now you know how to connect Xiaomi AirDots to an Apple smartphone.

How to connect Samsung BUDS to iPhone?

Can Samsung Galaxy Buds be connected to an iPhone? Yes. To do this, go to the Settings menu on the iPhone, select Galaxy Buds in the Bluetooth menu and click “Connect”.

How to completely reset AirPods?

With the lid open, press and hold the setup button on the back of the case for about 15 seconds until the status light flashes amber.

How to connect Chinese AirPods to Android?

There is a small button on the back of the charging case, press and hold it for a few seconds. As soon as the indicator between the earbuds flashes white, release the button. Airpods will appear in the pairing menu on your device, select them and follow all further instructions May 17, 2019.

How to connect Xiaomi Redmi AirDots headphones to an iPhone?

The Xiaomi AirDots feature is the touch panels on the outside of each earphone. With their help, you can connect Xiaomi wireless headphones to your phone. Press and hold both earbuds until you see a double purple-red flashing. This is a signal that you have reset the settings.

How to connect Redmi AirDots headphones to iPhone?

How to connect Xiaomi AirDots.

  • Hold the buttons on both earbuds until a red light appears.
  • Place the headset in the charging case.
  • Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.
  • When you click on Mi True Wireless EBs Basic_R (as the headset will be called), it will connect.

How to connect headphones to iPhone 7?

Connect the Lightning to 3.5mm adapter to the Lightning connector on your iOS device, and on the other side connect your headphones to it.

How to turn on the microphone on AirPods?

Microphone setting: left, right or automatic. Tap Microphone, then choose the option you want. When the microphone is set to Automatic, any of your AirPods can be used as a microphone. If only one earphone is used, it will be the microphone.

Why AirPods won’t connect?

If headphones are not connected, go to the next step. Close the cover, wait 15 seconds, then open the cover. Press the setting button on the case for 10 seconds. The status light should be blinking white, which means the AirPods are ready to connect.

How to connect Xiaomi earphones to iPhone?

Pairing your device with a Bluetooth accessory

  • On your device, go to the Bluetooth Settings menu and turn on Bluetooth.
  • Put the accessory in discoverable mode and wait for it to appear on the device’s screen.
  • To pair, tap the accessory name when it appears on the screen.

How to connect Xiaomi Redmi AirDots headphones to the phone or how to sync correctly?

It would seem, what can be difficult in connecting headphones to a smartphone? However, practice shows that some headphone models are not as SIMple as it might seem at first glance. In this article, we look at the connection of the very popular headphones from Xiaomi. Airdots.

They are delivered in a beautiful box, which is SIMultaneously used to charge them:

What exactly is the problem? There may be several of them. So, individual users cannot connect headphones to a smartphone, others connect only one earphone, third ones do not detect AirDots at all. How to be?

It is important to follow SIMple but necessary guidelines. So, if you see connection problems, first of all, do a reset on AirDots, for which first unpair with the headphones in your smartphone:

Next, do a reset, for which press the buttons on both headphones and hold for about one minute.

Next, put the headphones in the box for at least 30 seconds so that the headphones can detect each other. Important! Make sure they are at least 50% charged and there is no significant difference in battery charge between the earbuds, otherwise it may not work.

While you are waiting 30 seconds or longer, pick up your smartphone and turn on Bluetooth, for which go to “Settings”.

Tap on the Bluetooth line.

To get it like this:

You see the available device, which normally has the name Redmi AirDots_R, click on the name (R. Right, right earpiece, it is responsible for pairing both earbuds. If you see the letter L (left) in the name, only the left earphone will connect). If you do not see, click on the “Update” button.

Next, check how the headphones work. Both should play! Open any player and check, for example:

Read more:  Which Is Better Iphone 8 Plus Or Xr

If this method does not work for you, try the same thing again.

For the subsequent connection of AirDots to a smartphone, it should be enough to turn on the headphones themselves and Bluetooth on the phone. The device is paired automatically.

How to connect Xiaomi Redmi AirDots headphones to the phone: instruction

Wireless headphones have been the flagship accessory of the past few years. And more people are replacing “wires” with a more comfortable headset. Therefore, now many brands focus their production on such gadgets. The Chinese brand Xiaomi also does not stand aside. In the spring of 2019, the manufacturer released the new Xiaomi Redmi AirDots, also known as Mi True Wireless Earbuds Basic. According to buyers, they provide good performance and great sound. How to deal with connecting them to a smartphone. We will discuss in this article.

How to connect both earbuds:

  • Take the headphones out of the case.
  • Open the “Bluetooth” tab on your phone located in the “Settings”.
  • Turn on Bluetooth.
  • At the bottom of the page, click on the “Update” button to search for new devices.
  • In the list, select the name of the accessory “Mi True Wireless EBs Basic_R (Right. Right earphone)”.
  • Click on the name and confirm the connection request.
  • Next, you will see your accessory in the list of “Paired devices”. Connected devices.
  • In the menu, you will see information about the status of the headphones and the battery level.

Done! You can now listen to music.

Charging

The gadget will not be able to work if it is not charged, so place it in a case to fill the battery before using it. If the indicator is red, Redmi AirDots are charging, if white. They are ready for use.

Take the headset out of the case and wait a couple of seconds. The earbuds should sync with each other. When the left catches the signal from the right, sync is complete, as indicated by an indicator that will flash white.

How to connect Xiaomi Redmi AirDots headphones

To connect headphones, you only need a Bluetooth-enabled phone and the accessory itself.

Please note that turning on and off the gadget occurs as a result of removing or putting the headphones back into the case, respectively. So do not try to find any buttons with which you can activate them.

What you need to know about connection

Let’s pay attention to some nuances that are useful to know and take into account when it becomes necessary to connect Redmi AirDots.

Connection and control features:

  • Remember the indicator colors: red means there is no battery charge at the moment, white means ready for use, full charge.
  • The sound volume is controlled only by the rocker on the smartphone itself.
  • The connection methods are the same on Android and IOS.
  • It takes about 45 minutes to recharge the battery.
  • Battery life: about 3-4 hours.
  • To use only the right or only the left earphone, remove one device from the case, and leave the second there, wait until the frequent flashes change to slow ones and connect in the usual way.
  • The headset is connected to the computer in the same way.

How to connect Xiaomi Redmi AirDots headphones. Second way:

  • Take them out of the case.
  • Hold the touchpads on both headphones.
  • There should be a couple of flashes of red and white light. Hold the touch buttons.
  • There will be another blink of both colors.
  • Place the accessory back into the case.
  • Take it out and wait a little. Fast flashes become slow at the right earpiece.
  • Then just plug the headphones into your phone.

What to do if headphones won’t connect

Many people ask this question when the gadget cannot sync with the phone, or the name of the wireless headphones has disappeared from the list of paired devices.

Instructions for returning the accessory to work are as follows:

  • Take the AirDots out of the case, they must be turned off.
  • Hold the touchpad on each earbud for up to 15 seconds.
  • After triple blinking, put the earbuds in the case and let them charge.
  • Go to the “Bluetooth” page on your phone and remove the name of the gadget from the list.
  • Finally, go through the entire connection process from the very beginning.

How to connect 2 Redmi AirDots headphones?

Connecting two headphones to a smartphone:

  • Remove both earbuds from the charging case and wait 2 seconds until they turn on.
  • After switching on, the left earphone automatically connects to the right one, the indicator of which starts blinking white.

How to connect headphones to iPhone 7?

Connect the Lightning to 3.5mm adapter to the Lightning connector on your iOS device, and on the other side connect your headphones to it.

How to connect wireless headphones to iPhone?

Using an iPhone to set up AirPods

  • Go to the Home screen.
  • Open the case containing the AirPods and place it next to the iPhone.
  • The iPhone displays a setup animation.
  • Click “Connect”.

How to connect AirDots to your phone?

How to connect Xiaomi AirDots.

  • Press the buttons on both earbuds until a red light appears.
  • Place the headset in the charging case.
  • Turn on Bluetooth on your smartphone and wait until the accessory appears in the list of available devices.
  • When you click on Mi True Wireless EBs Basic_R (as the headset will be called), it will connect.

How to connect MI True Wireless headphones to an iPhone?

Place the earbuds in the charging case, then press and hold the function button for 2 seconds. The charging case indicator light will blink to indicate that the earbuds are waiting to be connected. 2. Turn on Bluetooth on the device, then find and connect to “Mi True Wireless”.

How to connect Airpods to iPhone? How to connect Redmi AirDots headphones to your phone?

The Xiaomi AirDots feature is the touch panels on the outside of each earphone. With their help, you can connect Xiaomi wireless headphones to your phone. Press and hold both earbuds until you see a double purple-red flashing. This is a signal that you have reset the settings.

Why AirPods won’t connect?

Go to the Bluetooth Settings menu. If AirPods are connected, make sure they are selected as the audio device. If headphones are not connected, go to the next step. Close the lid, wait 15 seconds, then open the lid.

How to connect wireless headphones to iPhone 7?

Once you’ve activated pairing mode, on iPhone, go to the Bluetooth menu. Find your headphones in it among the list of gadgets that are within Bluetooth range. Click on the name of the headphones, and the inscription “Connected” appears next to it, and the headset can additionally reproduce an audio signal.

Connecting to an Android phone

  • Turn on Bluetooth on the smartphone through the item of the same name or in the notification curtain.
  • We remove the headset from the case. Simultaneously clamp two panels and hold for a couple of seconds until a white flashing indicator appears.
  • Dots will connect to each other. If it doesn’t, try enabling them individually.
  • We go into Bluetooth and look for “AirDots BASIC_R” there. If there is a letter L, it means that only the left earpiece is legitimate, which will sound.
  • We give permission to exchange contacts and, at the request of the system, enter a password consisting of four zeros.
  • Enjoy listening to music or chatting with friends or loved ones.

The procedure may seem multi-stage and lengthy, but this is only the first time you connect. Then you only need to activate Bluetooth, and AirDots will connect automatically.

Before connecting Redmi Dots to another phone, be sure to remove it from your current smartphone. It is advisable to clear the application cache and reset the gadget to the factory state.

How to connect one ear pad

Users do not always want to use two inserts. For a conversation, only one is quite suitable, which acts as a compact headset. In addition, the battery life will increase by an hour.

But keep in mind that for such purposes you need to use the right ear cushion, which is the main one; the left one can be put back in the case. If you put the right one in the case, Xiaomi AirDots will automatically turn off. Just hold down one control button until the white flashlight appears and sync in the smartphone settings.

What to do if the headphones are connected separately

Out of sync is a very common occurrence that causes a lot of inconvenience to use. But there are two proven methods that will return binaural mode. The first option is a standard reset to factory settings, carried out by a long press (for 40-50 seconds) on the control button. A SIMilar procedure will also help:

  • We extract the Dots and forcibly deactivate them.
  • Clamp the panels until the red indicators light up and a beep sounds. We release the buttons as soon as the lights go out.
  • We put Mi or Redmi AirDots in the docking station and take it out again. Headphones should be connected to each other while still in the case, after which they will work in stereo mode without any problems.
Read more:  How to Connect a Canon Camera to a Computer

Connecting to iPhone

The headphones from Xiaomi work perfectly with the iPhone, but subject to the Bluetooth specification 4.2 and higher (version 4.0 may slow down the sound). If you have a relatively new model from Apple, pairing will happen instantly, and the melody will be broadcast in high quality without hesitation.

So, to work with iPhone you need:

  • Enable AirDots in the same way as in the first paragraph.
  • Activate wireless technology on iPhone and find the necessary gadget in the list.
  • Enter confirmation code.

Connecting Redmi AirDots to the phone

Modern headphones are very SIMple and comfortable to use, because no wires are required for listening. But with the introduction of the Bluetooth module, the connection to the phone has become more complicated. Owners of Redmi AirDots are often faced with the fact that the synchronization fails.

Today we will tell you how to properly connect two earbuds to mobile devices on Android and iOS and computers, and also consider methods to help with desynchronization.

Is it possible to connect to the computer

Any wireless earbuds connect not only to a smartphone, but also to a PC. The main condition is the Bluetooth module. All laptops have it, but most desktop computers don’t. Purchase a special adapter that plugs into the USB connector and transmits a signal.

  • Go to the computer in “Settings” and open the section “Bluetooth, printers, mouse”.
  • Select Add Devices. The model you want will be there (provided it is enabled).

This article has detailed instructions on how to sync wireless headphones with computers and laptops.

We discussed how to connect Xiaomi (AirDots Youth Edition) and Redmi to any device. As you can see, it’s pretty SIMple and fast. When problems arise, a hard reset almost always helps.

Pairing Xiaomi AirDots with iPhone

Turn on Bluetooth on iPhone (“Settings” “Bluetooth”, slide the switch to the “On” position). Wait for the smartphone to finish searching for compatible Bluetooth devices.

Take the Xiaomi AirDots out of the charging case. If the earbuds are in the case, they cannot be connected to another device by default. Outside the case, they will turn on immediately and the status LED will blink white. Thus, the right and left headphones are synchronized, they are ready to work in pairs.

A new name will appear in the Bluetooth search menu, associated with Xiaomi Redmi AirDots, or it will be Xiaomi Mi AirDots (or AirDots Pro. Depending on which headphone model you have).

The radar for detecting wireless devices nearby with the iPhone works constantly. You may have to wait a bit until the headphones appear on the list. Otherwise, just turn Bluetooth off and on on your iPhone so it finds your Air dots.

Click on “Redmi AirDots_R” and the pairing of the headset and the iPhone will continue to be carried out automatically, you only need to give permission for this connection. When the process is over, the indicator on the headphones will blink white and turn off.

Typically, wireless headphones connect to an iPhone without any problems. If you successfully completed this task for the first time, then the next time, as soon as you remove the headphones from the charging case, pairing with the iPhone will be done automatically. At the same time, you need to remember that first you need to get the right (main) earphone out of the case, otherwise, if you take out the left one first, then mono mode is activated for AirDots. This means that only the left “plug” will work, and with the right, synchronization will be lost.

Does Xiaomi AirDots Fit Apple iPhone?

The Chinese manufacturer of Bluetooth headphones has guaranteed not only support for Android but also iOS. Does this mean that Air Dots can be connected to any phone or tablet under the Apple brand??

Compatibility with iOS devices depends on the Bluetooth version used in phones and tablets. It is known that headphones from Xiaomi began to be released with support for the wireless protocol version at least 4.2, and the 2019 AirDots models already have support for Bluetooth 5.0 and Apple’s native AAC codec.

Take the time and check which version of the Bluetooth module your iPhone is equipped with. Owners of the iPhone 6 and 6 Plus, as well as the iPad Air 2 should be especially careful. Initially, these models were released in Bluetooth version 4.0, and support for 4.2 appeared in them later, along with the iOS 9. On other, new models of iPhones, compatibility problems there should be no Bluetooth versions. The fifth version of BT appeared in Apple devices starting with iPhone 8.

By the way, you will not be able to find out which version of the “blue tooth” on your iPhone programmatically through the “Settings”. In early iOS firmware, this information could be found by opening “Settings” “General” “About this device”. Item “Bluetooth”. Now this line contains an alphanumeric code, which is hardly understandable for a layman, consisting of 6 pairs of values, separated from each other by a colon. For this reason, it is best to check the specifications of your model, which are listed, for example, on the official Apple website, or use other reliable sources.

Let’s take a closer look at how to connect Redmi AirDots to iPhone.

Redmi AirDots controls

In the Redmi AirDots model, instead of touch controls, a physical button is installed on each of the headphones. Pressing a button is accompanied by a clicking sound, which can be annoying if you are immersed in the process of listening to music or watching videos.

Single press the button will pause the playback of a media file or allow you to answer an incoming call, because Air Dots is also a full-fledged headset. However, how smooth it will work with an iPhone in case of receiving calls, you need to check. On the forums, many owners of these headphones are not too happy with them when using them as a headset.

Double tap will call the voice assistant Siri (or Google Assistant if the headphones are used with an Android phone).

If you hold down the button for one or more seconds, then you can cancel the call.

Double press the button when making a call, turns off the microphone.

Not all users like this primitive control and will not be able to switch tracks with it. For many, this causes some discomfort, at least at first.

Connecting AirDots headphones to an iPhone

The Xiaomi brand is known for its high-quality and inexpensive (compared to competitors) smartphones sold not only in China but also in many countries around the world. Not only mobile phones, but also accessories of this manufacturer are deservedly popular among fans of high-tech gadgets. Many people enjoy wearing Xiaomi smartwatches and fitness bracelets. In this regard, it is also impossible not to mention the Xiaomi AirDots wireless headphones.

Affordable price, attractive appearance and good quality make Air Dots Bluetooth headphones a “tasty morsel” for many smartphone owners. Among them are not only fans of the Xiaomi brand, but also those who are loyal to Apple products. There are finally decent models from Xiaomi that can be used with an iPhone or iPad instead of expensive AirPods.

Sound quality

The inconvenience of using the button is compensated by the decent sound quality that these headphones give out. Of course, you shouldn’t expect exceptional sound from these inexpensive “ears”, but for the price they are some of the best examples on the market. In general, there may be a little lack of bass, but the highs sound crisp and clear. The mids are good too, even when the playback volume is set to maximum. In any case, you can adjust the sound frequencies using the equalizer, which you need to download and install on the iPhone.

The following can be said about Redmi AirDots: they are beautiful and functional, despite their low price. The sound quality is good enough for an inexperienced listener. Music connoisseurs who prefer to deal with audio in uncompressed formats will surely find their flaws. Easy connection to an iPhone and the ability to use AirDots for 4 hours on a single battery charge means you can take these wireless headphones with you to work, on a walk, to the gym or on a trip.