Reboot Samsung TV

15.11.2021 Gralbine Samsung

How to reset network settings on a Samsung TV?

Open the settings and go to the “General”. “Network” section. We select “Reset network settings” and confirm the reset to factory values. After restoring the factory network settings on the Samsung TV, we try to connect it to the Internet again.

How to reset the console to factory settings?

press the reset button with a toothpick (in the center of the AV connector), a characteristic click should be heard;
keeping the button pressed, supply power to the set-top box with the power supply unit (plug into a power outlet);
while continuing to hold the reset button, press the power button on the case;

How to reset Samsung to factory settings if you forgot password?

5 Do a hard reset

Turn off your smartphone and remove the memory card from it.
Try to hold down and hold the following buttons in turn for about 10-15 seconds:
If one of the combinations suits, the service menu will appear on the screen.
Confirm the execution of the reset.

How to restart Smart TV box?

Hard-Reset Android set-top boxes. method number two

Now we disconnect the power cable from the set-top box (just pull out the power supply plug from the connector on the case) and, while continuing to press the “Recovery” button, after a couple of seconds plug it back in and press the power button on the front panel of the set-top box.

What to do if the TV does not respond to the remote control?

Problems that you can fix yourself

The simplest reason the TV does not respond to the remote control is the batteries. Try replacing them and check the remote again. The contacts of the remote control board are oxidized. Disassemble the remote control and wipe the contacts of the remote control board with a cotton swab dipped in alcohol.

How to reset Samsung remote?

Factory settings for Samsung Remotes

Perform a factory reset on your Samsung TV remote by holding the “B” and “C” keys on the remote until the remote indicator blinks twice. Enter code “981” to complete the reset.

Is it possible to restart the TV?

Press and hold the power button on the remote control for 5 seconds until “Power off” appears. The TV turns off and on automatically after about one minute. Disconnect the AC power cord (cord).

How to reset to factory settings?

Resetting the settings and returning the TV to its original state with the parameters set to it during the factory assembly is not a difficult task. It can be performed using the remote control supplied with your TV. With its help, you can later restore those parameters that are most comfortable for you when watching TV programs.

The algorithm for resetting the entered parameters will directly depend on which series of Samsung TV models you have. In general, this procedure is the same type, but the menu items in the operating system of different series may differ slightly from each other.

D series

Using the remote control on the TV, open the item “TV-section”. Next, you need to press and hold for 8-10 seconds. a button called Exit, which will take you to a new window. Click the Ok button. After this click, your settings will return to the original stage, in which they were during the factory assembly. After rebooting, you can start manually entering the new desired parameters into the TV.

E series

Using the remote control, you need to enter the menu displayed on the TV screen. Find the “Settings” option by going through it, select the next option called “Support”. Next, select the automatic diagnostic function and then activate the factory reset function.

You need to activate this reset by entering the code. 0000, and then confirm your actions by pressing the Ok button.

If you are the owner of a Samsung TV model of the M or Q series, the manual settings are reset in the same way. first you go to the “Settings” menu, then through the support option, select “Reset settings”.

After the TV starts to reboot and reset the manual parameters, completing the task, it will turn off. You will need to reactivate it and, using the remote control, start manually re-entering the settings you need.

F series

Use the remote to access the TV options menu. On the left side of the screen, you will see an option called By pressing this button, you will go to the support menu. there you need to activate the automatic diagnostic mode. Next, you will need to select the function of resetting the settings and also activate it. After that, the parameters entered earlier will be reset to the original factory settings.

Appointment

Failures in the TV software system are due to incorrect settings made by the user himself. Let’s consider what the result will be if you delete all manually entered parameters and restart your Samsung TV to the settings that were made by the manufacturer.

There will be a loss of brightness and contrast parameters, sound, the order of the TV channels, screen image settings, Wi-Fi network operation, connection with Google Play and much more that were entered manually will be disrupted. After the procedure of resetting the settings, they will need to be entered again, it is likely that such a process will take quite a lot of your time. This is especially true for the color and contrast settings of the image.
All previously found TV channels will be lost, only the basic (minimal set) will remain. In addition, the list of blocked television channels will also be completely lost, subsequently it will have to be restored again, also manually.
When you reset the settings to the factory settings, you should understand exactly the change in manually created settings, while the firmware of the operating system on the TV will remain the same.

If you cannot do without such drastic measures, and you fully understand the consequences of resetting the previously entered settings, then it makes sense to carry out this procedure.

Series K

Using the remote control, you need to open the TV menu and go to the settings options. Find the “Support” feature. If you select the “Self-diagnosis” option, then you will be taken to a new menu, where from the list that appears, you need to select the reset function.

To activate this option, you must enter a digital code on the control panel, which consists of 4 zeros.

Factory reset for Samsung tv.

After entering this code, your TV will start updating in automatic mode, and all manual parameters you entered earlier will be deleted.

J and H series

Find the button labeled “Menu / 123” on the TV remote control and press it, as a result of which you will see a list of options on the TV screen from which you need to select “Settings”. Next, you need to go to the automatic diagnostics mode and select the “Reset” item. To activate the reset of parameters on the remote control, enter the code, which consists of 4 zeros, and then confirm this action by pressing the Ok button. By following these steps in sequence, your TV will reboot and reset all of your manual settings.

How to restart a Samsung TV

Samsung is one of the largest and most popular brands in the TV market. Typically, this manufacturer tries to make their TVs as user-friendly as possible. But sometimes there are situations where the TV software may crash and require a reboot or even a factory reset. Samsung TVs are no exception. You should also be aware that Samsung often offers a no-reboot solution, especially on Smart TVs. In such cases, a reboot should be the last solution.

Anyway, in this article we will help you figure out how to restart your TV to solve a software error.

How to Reboot Samsung TV 2014-2018

If you are using a 2014-2018 Samsung TV, you need to follow these steps to restart it:

HOW TO SET SAMSUNG TV TO FACTORY RESETTING MODE | FACTORY RESET PIN CODE

Press the “Menu” button on the remote control;
Then find and select “Support”;
Then select “Self-diagnosis”;
Select “Reset” and enter the PIN.

samsung smart TV D5700 eeprom reset, bootloop, boot schleife, factory reset

After completing these steps, the Samsung TV will restart immediately. It is very important not to turn off the TV during the reboot process. This process may take several minutes and the TV may restart several times.

How to Reboot 2021 Samsung TV

If you want to reset your Samsung TV, please follow these steps:

Press the “Home” button on the remote control. This button should display the main menu on the TV screen;
Then select the “Settings” icon;
Then find and select “Support”;
In the “Support” menu, select “Device Care”;
Then select “Self-diagnosis”;
Finally, select the “Reset Smart Hub” option and enter the PIN (default PIN is “0000” or “1111”).

After completing these steps, the Samsung TV will restart immediately. It is very important not to turn off the TV during the reboot process. This process may take several minutes and the TV may restart several times.

How to reboot Samsung TV 2020-2020.

If you are using a 2018-2020 Samsung TV, you need to do the following to perform a factory reset:

Press the “Home” button on the remote control. This button should display the main menu on the TV screen;
Then select the “Settings” icon;
Then find and select “Support”;
Then select “Self-diagnosis”;
Finally, select the “Reset Smart Hub” option and enter the PIN (default PIN is “0000” or “1111”).

After completing these steps, the Samsung TV will restart immediately. It is very important not to turn off the TV during the reboot process. This process may take several minutes and the TV may restart several times.

How to reset an old Samsung TV

If you are using an old Samsung TV, you need to follow these steps to reboot it:

First press and hold the “Exit” button on the remote control for 12 seconds;
After these 12 seconds, the Factory Reset window will appear;
Select “OK” and wait for the reset process to complete.

After the reset process is complete, the TV will turn off.

Resetting your Samsung Smart TV is a simple process. The reset option can be found at the bottom of the General menu, under the Settings menu. Please note that you will be prompted for a PIN to complete the reset process.

In addition, restarting the TV will erase any custom settings you have made for the TV. The TV will restart with the default settings that were set at the time of purchase.

Series K

To activate this option, you must enter a digital code on the control panel, which consists of 4 zeros.

After entering this code, your TV will start updating in automatic mode, and all manual parameters you entered earlier will be deleted.

Appointment

There will be a loss of brightness and contrast parameters, sound, the order of the TV channels, screen image settings, Wi-Fi network operation, connection with Google Play and much more that were entered manually will be disrupted. After the procedure of resetting the settings, they will need to be entered again, it is likely that such a process will take quite a lot of your time. This is especially true for the color and contrast settings of the image.
All previously found TV channels will be lost, only the basic (minimal set) will remain. In addition, the list of blocked television channels will also be completely lost, subsequently it will have to be restored again, also manually.
When you reset the settings to the factory settings, you should understand exactly the change in manually created settings, while the firmware of the operating system on the TV will remain the same.

If you cannot do without such drastic measures, and you fully understand the consequences of resetting the previously entered settings, then it makes sense to carry out this procedure.

Series B, C and D

On TV receivers of the B, C and D series, released in 2009, 2010 and 2011, respectively, to carry out the reboot process, you need to press the “EXIT” button on the remote control and hold it pressed for at least 10 seconds. So a notification will appear on the screen: “Restore default values for all settings.” To confirm the action, click “OK”.

How to reset a J-series TV

Enter PIN-code (if the code has not changed, dial 0000).

The settings have been reset. TV turns off and on again.

What will happen to the TV after a factory reset

Resetting the TV will restore the device to its factory settings. All changes made by the user, including installed widgets and applications in the Smart TV menu, as well as tuned-in TV channels will be deleted. All problems, unless they are hardware problems, will also disappear.

What will happen to the TV after a factory reset

A common problem with failures is not knowing what actions were previously performed. An example is the activity of a child who could “add up” in menu sections and change existing settings. In most such cases, resetting the settings will be the only way to return to normal operation of the device.

E series

You need to activate this reset by entering the code. 0000, and then confirm your actions by pressing the Ok button.

Reboot via Smart Hub

Resetting the settings via Smart Hub does not completely reboot the TV receiver. This procedure applies only to the Smart-functions of the device and is carried out to remove all programs installed in the Smart Hub in addition to the existing ones, as well as to reset all user settings in standard applications and in the entire Smart-menu of the TV. To restart Smart Hub, you need to press “Menu” on the remote control and go to “Settings”, and then to “Support”. Here you need to find “Self-diagnosis” and click “Reset Smart Hub”. In a new window on the screen, you need to specify the PIN code and confirm your consent to perform the action.

Important! Before performing a factory reset via Smart Hub, make sure that the TV panel is certified for the region in which it is being used. For the Russian Federation, the last letters in the device model name must be “RU”. If the equipment is not certified, after restarting the Smart Hub will be blocked at the regional level.

After the Smart Hub reboot process is complete, you will need to log in to the service again, accept the terms of the license agreement and privacy policy, and reinstall all necessary widgets.

So, if the Samsung TV freezes, turns off or turns on on its own, closes applications arbitrarily, or somehow its unstable operation manifests itself, you can fix the problem by resetting the device to factory settings. After rebooting the TV, malfunctions, unless they are related to components, are usually eliminated. In the event that this did not happen, and the problems still appear, you will need to contact the service center representatives to fix the breakdown.

Knowing how to reset Samsung and LG TVs is recommended for all owners of these TV receivers. This simple operation will help you reset the device if it freezes, incorrect user actions, incorrect operation, or in other cases.

J series

On J-series vehicles, released in 2015, to reboot, you must:

press “Menu” or “MENU / 123” on the control panel;
go to the “Settings” tab;
open the “Support” tab, after. “Self-diagnosis”;
click “Reset”;
specify the PIN-code, click “Yes”;
wait for the TV receiver to reboot.

What is a reboot for?

Most often, it is necessary to reboot the device due to a software failure that disrupted the operation of the TV receiver. It can be caused by a voltage drop, old software version, incorrect user actions, childish pranks, lack of memory, etc.

If Internet is disconnected in the Smart TV menu when installing or updating an app, Smart Hub may be blocked. To restore it to work, you will also need to restart the television receiver.

Reload algorithm for different series

The steps you need to take to reset your Samsung equipment may differ depending on the year of manufacture of your TV receiver. You can determine when the device was produced by its labeling. So, in the name of the model, for example, UE46F6400, the letter U means the type of screen. LED, 46. the diagonal, F. the year of manufacture (2013). The first digit after the letter F is 6, it means 6 series of the TV. The more technologically advanced the device, the higher the serial number of the series (4, 5, 6, 7, 8, 9). It does not affect the reboot process.

Resetting the TV set is performed using the remote control. Without a remote control, the procedure can be performed only on those Smart TVs that can be controlled from a smartphone (through a special application). On older versions of TV receivers, access to the menu is available using the control buttons on the case, but on new devices this is not possible.

M, Q and LS series

TV sets of the M, Q and LS series were released in 2017. A complete reset of the settings to the factory settings on them like this:

from the remote control by pressing the “HOME” button, you need to select the “Settings” section;

then you need to open the “Support” tab;

then you need to go to the “Self-diagnosis” section and click “Reset”;

there you need to enter the PIN code;

at the end, press “Reset” again and wait for the device to reboot.

Factory reset via Smart Hub

An alternative option in case of incorrect operation of applications is to reset the settings through the Smart Hub. This function completely clears the memory of all applications and reinstalls those that were original.

IMPORTANT! Before proceeding to reboot the system in this way, you should check the certification of your TV. The last digits of the Ukraine code on the sticker must end with XUA and be followed by signs in the form of a trefoil. In the case of an uncertified model. by resetting the Smart Hub will be locked at the regional level.

Once you have checked the certification and made sure it is there, you can proceed with the reset steps. To do this, you will need to follow these recommendations:

Go to TV settings.
Find the item “Support”.
Go to the “Self-diagnosis” section.
In the above section, select the “Reset Smart Hub” function.
In the highlighted window, enter the pin code and confirm the action.

After the reset operation, you will need to go to the “APPS” panel. In the window that appears with the initial information, you will need to click “OK”. The system will then display the terms and privacy policy. For consent also click “OK”. Going through all the points of the listed instructions, all applications will be reinstalled. To determine the correctness of their work, you should check them.

IMPORTANT! Application shortcuts should not be darkened.

It can take a long time to download applications (it depends on the internet speed).

What will happen to the TV after a factory reset

MQ and LS series

Unlike previous series, to go to the TV menu, you will need to find the button on the “Home” remote control and find the settings item directly on the screen.
Select “Support”.
Next, click on the self-diagnosis item and select “Reset”.
In the window for entering the pin code (by default, these are the numbers “0000”), enter the necessary numbers and complete the process of restarting the Smart using the “OK” button.

Turning off and turning on the TV on its own will show that the system is restored to its original form.

How to reset your Samsung Smart TV

Sources:

http://stroy-podskazka.ru/televizor/Samsung/kak-perezagruzit/
http://ru.tab-TV.com/?p=28576
http://rusnewsonline24.ru/nastrojka/kak-perezagruzit-televizor-Samsung-Smart-TV
http://pcznatok.ru/kompjutery/kak-perezagruzit-televizor-Samsung-Smart.html

reboot samsung