PC table with gaming. Tools and preparatory work
Big idea for a small computer table
I want to make my modest contribution to the topic of DIY computer tables. For the last year, I have actively monitored the market in search of my requirements suitable for my requirements. and did not find. There is only one way out. make your own. Next, the story about my dream computer table. But before going to the main thing, I’ll tell you what I needed so special from the table, which I could not find anywhere. I like to break off the computer, play toys. A powerful computer. a lot of space. But in a small apartment where I live, it is difficult to find a place where I wouldn’t interfere with anyone or someone didn’t interfere with me, so I would like to be able to move the table with the computer as part of the apartment. I have rejected gaming laptops for a long time, as it is expensive, much less productive, deprives the pleasure of delving into the computer.
So the first mandatory requirement for the table was born. mobility.
All searches in this section lead mainly to the same result: the table is small, uncomfortable, ugly.
Thus several more requirements appeared: it should be at least 80 cm in width, t.e. Convenient, with the ability to stretch your legs (without any shelves and other nonsense there) and a rather nice.
How to Build a Gaming PC in 2022
In principle, already at this stage, I realized that my requirements are almost mutually exclusive. either beautiful, convenient and unmbitious, or mobile, small and uncomfortable.
I found a temporary compromise in the table DL-083 bureaucrat. The design is so.so, but this is the best that I managed to find, given the requirements. Instead of standard legs, wheels are easily screwed up, and the table with its dimensions gains the opportunity to move. Here are a few photos with different use scenarios:
UPS had to be put on the table at the monitor, which is not very good, since he filled on the floor a couple of times, but you can move without even turning off the computer, a kind of close-overgrown. There were also constructive shortcomings: the metal frame did not allow the monitor away from itself, and 27 inches generally barely climbed. Plus I had to modernize a little to crawl into a 60-centimeter door.
Very quickly, I realized that the flimsy design of the table is not particularly adapted to movements: the computer itself is about 40 kg, plus some small things on the upper shelves gives the table such a parrhus that it becomes terrible to move it. After a little more time, it was found that the location of the wheels is also difficult to endure all this and bend in different directions under the weight of my idea. However, for more than six months he successfully served me in the script of the apartment nomad and did not fall apart.
So I slowly approached the idea that what I need, I can do only myself. He climbed on DIY forums, Habrahabra, looked what people are doing for their computers, whether my anxiety and dreams share. I saw many tables of good and different (not for me to evaluate them) and realized that I would have to invent a bicycle from the very beginning. There were, however, very interesting tables, but all the wrong. The favorite, of course, is the article by Boomburum’s office. a very cool solution, but, having weighed its capabilities and requirements, I decided that this is also not my option, and finally formulated everything that I need from the computer’s computer table:
- nothing superfluous (no additional. shelves and levels);
- The retractable shelf under the keyboard should be at least 84 cm so that a large keyboard with an additional block and a large convenient mouse mat can comfortably fit on it; a height that allows you to accommodate Microsoft Natural Ergonomic Keyboard;
- not a woody stove (crumbled during movements);
- a minimum of metal (a massive durable design will look ugly, and I already had an example of a considerable design);
- with an interesting design fit into the home interior;
- with the ability to accommodate the Full Tower system unit up to 600 mm in height (so that after the next upgrade you do not have to make a new table);
- depth is about 60 cm (the optimal size for convenience and so as not to get stuck in my kitchen door);
- Separate hidden niche for UPS.
That’s perhaps all. I love to work with a tree, so speaking in simple language. I decided to confuse. I did not want to start such a project without prior preparation, so I began to study which programs exist to design furniture. Searches for the same DIY forums led me to the Google Sketchup program. A very simple program in mastering and after several lessons gives a feeling of omnipotence. Searching for inspiration on various design and professional sites, I drew this:
I admired him for a long time, showed relatives and friends, finished off the trifles, and finalized the structure. Quite a lot of time has passed before I decided to go directly to the implementation of the idea. Despite my desire to make a table with my own hands, I, having weighed everything “for” and “against”, thought that I would not want to turn my dreams of my dreams with my own hands (there were a lot of exact sizes with which I could not miss), so it was decided Seek help and give an outsour to your friends who are engaged in the production of furniture. After communicating with the master, there were weak places: it was necessary to strengthen the strength of the structure. Therefore, due to the posterior wall and the extended left vertical panel, he created an additional stiffener frame. At the same time, I finalized the design, dimensions and design a little (the correct dimensions only in the first picture). This turned out:
Gamer table with a built.in computer with your own hands (26 photos)
It’s always nice to look at things made by the hands of a real master. So, after all? Today we suggest you look at how one gamer has collected a cool computer table for himself in 20 days. And no, this is not a simple table, because the author of the photo built a powerful computer into a homemade table.
The AMD Ryzen 2700X, NVIDIA GTX 1080 Ti, 16 GB DDR4 3200, M2 SSD for 1 TB and two NZXT X62 water systems for CPU and GPU are installed inside.
Drawings and schemes of computer tables with dimensions
If the question arises, how to make a computer table with your own hands at home, you should first think about the types of these products. This will help choose a common project and create high.quality drawings, which will greatly simplify the work. The details will subsequently color.
There are different types of computer tables:
The classic version is a regular rectangular working surface with solid side legs, a retractable shelf for the keyboard, boxes and separation for a system unit. The length should be from 80 to 150 cm. Depth. 65. 70 cm. The usual height is 75 cm. If a person’s growth is greater than usual, then the height is calculated by the formula: Human growth x 75/175.
It is not difficult to make a drawing table.
Drawings for this model are most simple. just measure the desired length and width of the product. After the dimensions of the countertop are determined, you can draw the dimensions of the remaining departments.
Make sure that you have all the necessary tools.
Important! The product should be 3-5 cm less than the occupied space. Otherwise, the furniture will be inconvenient to install in the allotted place.
Be sure to check that you have worked all the details and have not forgotten anything.
The model with the upper shelves is like a classic. But he has shelves built over the work surface. This option is very convenient for small rooms, or for installation in the gaming area of a common room or next to the kitchen table.
Use high.quality materials to make a table.
On the upper shelf you can install a printer, books or fold the necessary things. Here they will always be at hand. The manufacture of the drawing for this model also begins with the determination of the dimensions of the countertop. After that, the sizes of the sidewalls are determined.
Prepare all the details for assembling the table.
Their width should be equal to the width of the table, height 160-180 cm. At this height, you can place 1 or 2 shelves for small things. A place for a system unit is allocated below. For convenience, you can place a pair of drawers or shelves.
It will be more difficult to make a corner table.
Corner products are two types. The easiest option is when a person is located perpendicular to one wall and another parallel. This is the most convenient model, but it takes up more space in the room. The working space of such a product is two rectangles connected by perpendicular. The monitor and keyboard will be located on one side. On the other hand. a printer, papers, and small items.
After preparing the drawings, it is necessary to calculate the required material.
In the manufacture of the drawing, the dimensions of the main countertop are first determined, where the monitor will be located. Then the dimensions of the additional working surface are determined. After that, the sidewalls and the lower support in the corner are created.
Advice. The most convenient option is when two countertops are located one above the other. The main one is slightly higher, additional-lower by 15-20 cm. In this case, an additional shelf appears in the corner between the details.
Important! For comfortable working conditions, the length of the free edge of the working surface should be 80-100 cm.
The tabletop for the table can be selected any material.
Another model of the corner table involves the location of the user diagonal in the corner. This is the most difficult option for manufacturing. To create this drawing, it is first necessary to determine the size of the side parts and after that relative to the size of the sidewalls, the size of the countertop is calculated. Working diagonal should be 60-70 cm long. The depth of corner furniture should be 80-85 cm.
Legs can be made of metal.
Suspended version involves the absence of legs. In this case, the countertop is attached directly to the wall. Usually this option is used for country structures. Such a model is located in the corner, attaching with the help of furniture corners to both walls.
The table can be without legs.
Advice. For convenience, a separate stand should be provided for the screen, which will be located above the countertops by 7-10 cm.
DIY table manufacturing instructions
After creating drawings and cutting parts, you can proceed directly to the assembly of furniture. It is previously important to prepare all small components, such as furniture corners and guides for a retractable surface under the keyboard and the necessary tools.
Follow table assembly instructions.
- Round the corners of all parts. On the sidewalls, cut the corners under the skirting board.
- Follow the main details with the help of furniture corners: countertop, sidewalls and rear details.
- Check how conveniently a person feels at the table and how the furniture is installed in the designated place.
- If everything is in order, then it is necessary to tighten the screws in the furniture more firmly and continue the assembly.
- Turn the product with a countertop up. First, additional vertical details are attached, after which shelves are installed, guides for boxes and a retractable panel. Special legs are screwed from below, which will protect the floor from scratches.
They have two working sites: the main thing is in front of the monitor, an auxiliary. for papers, printer. The advantage of using corner computer tables made by yourself is a compact location. Similar models can be used in conditions of a shortage of square meters.
Most often, these are representatives of professional gaming tables. Side shelves and compartments are filled with equipment, game consoles, auxiliary accessories, speakers. Lack of use. this option takes up a lot of space.
There are more original tables. in the form of a semicircle. However, they are less practical and do not always successfully fit into the overall interior of the room. The types and sizes of computer tables are selected individually, based on the needs of the owner.
DIY computer in the table
Greetings, habr! I am a PC fan in the table, I have been doing them for a long time and today I want to show you my new project.
The most compact and thin computer in the table that I did.
A comrade asked to make a PC for him in the table, but with unusual dimensions and high requirements.
He had a corner from which he wanted to make himself a compact, game setup.
The dimensions of this area are 93 by 160 cm.
Table dimensions 92 by 65 cm. Good iron should fit inside, with a liquid cooling system.
Sweep the countertop with a whole piece of skin.
On the front of the countertop there are two USB 3.0 and a full.fledged cartrider.
Color black matte, red stripes on the legs.
The first button turns on the power supply, the second button turns on the PC itself, and the remaining four buttons to control the lighting in its room.
I made a countertop, in dimensions it is 92 by 65 cm.
The countertop with a mechanism, the glass knows how to rise and drop to easily replace or maintain components.
Made guides for the mechanism and cover.
I figured out how to make a removable dock with buttons.
The base will be attached from the bottom of the countertop, and let the cables from the buttons through the internal cable channel. The client can easily replace the buttons if he wants something new.
Minimum area, but everything should fit inside and cool well.
1 and 2 are 360 mm radiators, to cool the processor and video card.
5 This is a casing for a power supply, Wi-Fi module, cable synchronizer and controllers.
6 This is a false panel with a motherboard and a video card.
I decided to make a double bottom to make cable management and hide all the cables.
Suppose in the 24 PIN food area we cut out the cable channel and hide the cable inside.
And so I do with each cable that will be on this computer, this is how it will work out to create cleanliness and order inside.
There is a lot of ventilation at the very base.
Under the motherboard and a video card, blowing cold air inside and on the sides, six coolers are responsible for blowing hot.
I changed the geometry of the legs in this audit and added a new chip.
The insert in the center of the leg is now highlighted. Live, looks unusual in the dark, but I like it when there is no backlight at all.
I now make the inserts themselves on magnets and they are removable, they can be quickly replaced and updated by the design of your table.
He made a black table, a year later when he had already bored with you, you took off the insert in the leg and changed it to any other, thereby easily updated the design of your table.
On the front of the countertop, I installed two USB 3.0 and a full.fledged cartrider.
And buttons for turning on PC and control of lighting in the room, as my friend wanted.
The countertop is covered with a whole piece of skin, without a single junction. To the touch turned out a very pleasant table.
Black, matte.colored table, red strips on the legs.
The angle of inclination of the countertop can be changed.
The countertop rises and you get access to all components, they can easily be replaced or serviced. Everything is done for maximum convenience.
The bracket made for one monitor, it allows you to move the monitor in all planes and does not take up a place on the countertop.
Inside, I9 9900K was installed on the MSI Z390 Gaming Pro Carbon motherboard.
To cool the processor, Thermaltake Floe Riing RGB 360 TT is used.
In AIDA 64, I received 73-78 degrees, with the quietest mode of work of coolers.
Glass countertop during a peak load on the system “Heated” to 27 degrees.
Noise at peak load (I simultaneously turned on AIDA64 and Furmark) was 35-38 dB. Distance 40 cm from the table.
The table was taken to the new owner home.
Soon he will install additional lighting in this corner, change the chair and add shelves to the devices.
Depending on your capabilities and needs, you can make a straight, angular or combined computer table.
The dimensions and shape of the product depend on many factors:
- Dimensions of countertops;
- Selection of the location and configuration of the product (straight, corner);
- Functional features (a highlighted place for installing a system unit, printer, lighting devices, distances between supporting elements, etc.).
As practice has shown, most of the home masters arise when designing a corner table for PC. Consider the calculation rules in more detail.
Corner table design: Features of the product and installation
Before drawing a drawing, you need to decide on the design of the computer table. In the classic version, such a product consists of three modules:
- A supporting box, which is additionally a dedicated place for a systematic;
- A door with a door or drawers. This element of “part.time” is the second support element;
- Corner countertop.
The assembly scheme of the computer table is its simplicity:
- Support blocks are placed at the edges of the structure.
- The counting element of the modules is a countertop, which is installed on the supporting elements using dunce or furniture screeds (ruffixes, eccentrics).
- To give additional stiffness in the corner of the countertop, a leg made of stripes is attached a wood-bearing plate or metal.
Rules for calculating
Before you make a corner table for a computer with your own hands, you need to make a drawing with a detail and the size of all components. The dimensions are calculated as follows:
- The necessary wing length and the depth of the countertop are determined for comfortable operation;
- The width of the support structure is calculated, which will play the role of a place for a system unit;
- The dimensions of the cabinet are calculated, taking into account the depth of the countertop and the necessary working space for the operator.
Use these FREE tools to Optimize your CPU for Gaming in Windows. 2022
Important! For convenient use and assembly of the corner model, it is necessary to provide indentation from the edge of the countertop to supporting elements.
The optimal table size
The production design uses the optimal dimensions of this model. The standard dimensions of the computer table suggest the following dimensions of the modules:
- Countertop (d1cryla d2 wings w). 1344 1544 600 mm.
- Supported box with a place for a computer (d w v). 510 250 734 mm.
- Supporting cabinet (d sh c). 510 450 734 mm.
Important! In this version of the execution, the indentation from the edge of the cover to the installation site of the support modules is taken into account. 70 mm. Thickness laminated woody stove-16 mm. The total height of the product is 750 mm.
When determining the minimum dimensions of the structure, it is necessary to reduce the depth of the countertop, the length of the first and second wing, indentation from the edge, as well as the width of the support unit for the systematic from standard values. The drawing looks as follows:
- The dimensions of the countertops (d1cryla d2 wings w). 1104 1354 500 mm.
- Supporting unit with a place for a system unit (d w.). 490 200 734 mm.
- Tumbling with boxes (d w v). 490 450 734 mm.
Dentins are reduced from 70 to 50 mm. In this case, the width of the working area is 50 cm, this is enough for a comfortable operation by a teenager.
If you make a small table, make the compartment for the system unit open for better computer ventilation.
“Make yourself. with your own hands”. A site of interesting self.liveings made from improvised materials and items at home. Step-by-step master classes with photo and description, technology, life hacks. Everything that is needed for needlework to a real master or just craftsman. Crafts of any complexity, a large selection of directions and ideas for creativity.
Simple computer table
I’m very tired of monotonous computer tables that are at home like a carbon copy. And I decided to make a completely original, exclusive computer table for myself, with dimensions that will be convenient for me personally. In addition, a home.made computer table is not only very healthy, but also very cheap, since all materials can be purchased at the nearest construction and plumbing stores.
- Steel pipe with thread (diameter 3/4 inch) 610 mm. 4 pieces.
- Steel pipe with thread (diameter 3/4 inch) 457 mm. 5 pieces.
- Steel pipe with thread (diameter 3/4 inch) 152 mm. 2 pieces.
- Steel pipe with thread (diameter 3/4 inch) 51 mm. 3 pieces.
- Steel pipe with thread (diameter 3/4 inch) 25 mm. 2 pieces.
- Triplines for pipes diameter 3/4 inches. 7 pieces.
- A flange for a steel pipe with thread (diameter 3/4 inches). 5 pieces.
- The end plug for a steel pipe with thread (diameter 3/4 inches). 4 pieces.
- Plywood sheet. 1 piece.
- Plywood ribbons. 1 roll.
We start assembling the table.
We start with the easiest. assembly of the base from the pipes. To get started, I collected the first two legs.Further twisted everything else. Nothing complicated, everything is quite simple and trite. see the picture. The assembly field is desirable to paint the base of the nitro paint from the spray can, but I personally left it as there is. Everything turned out very carefully, without any burrs.
Now we move to the most difficult. to the countertop.Firstly, we cut out the required size rectangle. Further, if you make a cutout (you can leave the table and without cuts), you need to draw them with a pencil. Pre.recalling geometry for grade 7 and calculating cutouts.
We cut out our cutouts along the contour with an electrician. Then, using fine sandpaper, we clean the edges from burrs. Make sure there are no large cracks and chips. Small trick: so that when cutting the edge is not too “torn” with a jigsaw. glue the edge of the tape along the edge, so you protect the edges of the countertop.
We take the border adhesive tape and glue them onto the ends of the countertop, using an iron. After the tape is glued, the excess parts are very neatly cut off with a sharp clerical knife.If desired (as I did), you can cover a stain in several layers and wood varnish. There is an alternative. you can use ready.made varnish with a wood tint. Use varnish necessarily in a well.ventilated room, and preferably outdoors.
Final assembly.Put the countertop on the base, fasten with the bottom self.tapping screws using an electric screwdriver. That’s all. Very beautiful. It turned out just awesome. I am personally very pleased with the result, and saved money.
The steel base of pipes is very reliable and ensures the reliability of the entire structure, and greater stability.I will partify my computer equipment. Looks very beautiful.
PS: There was an idea to use PVC pipes, but to make the design stable and reliable, you need to use wider diameter pipes, which it seems to me that it would not be quite beautiful and aesthetically pleasing. So, keep in mind.I hope my budget project will inspire you to more interesting ideas.Original Article in English
The stage of processing the countertop
After all the holes, grooves and excavations were implemented, according to the original plan, the countertop must be appropriately processed to bring it into the working form. First, grinding all surfaces with sandpaper is performed, including the inside of the holes. To achieve perfect smoothness, different types of granularity of “sandpaper” will be needed. 100, 280 and 360. The process of manual skin can take several hours, as it requires special care when performing.
- lack of harmful fumes, environmental friendliness;
- resistance to high temperatures and moisture;
- quick drying in a few hours;
- preservation of the natural structure of the wood surface;
- Ease of use and subsequent operation.
- In retail sale, it is difficult to find a suitable desktop model;
- When acquiring a furniture shield for a countertop, you need to give preference to hard varieties of wood;
- When searching for milling services, you can encounter difficulties;
- Oil coating. a good type of finish for wood.
Using these tips, you can try your own forces in the manufacture of other types of furniture, which will entirely satisfy all your requests and requirements.
After some time, I corrected the mistakes made and make another table, but from the beech. This is the material pre.purchased: